BIG KING HORN SPEAKER ENT 111BP TRANSMITTER User Manual 500 550 Manual RFID New TX ICONS p65

BIG KING HORN SPEAKER ENT. CO., LTD. TRANSMITTER 500 550 Manual RFID New TX ICONS p65

User manual

Page 1211. Dome-Light or Window Roll-Up: (•Dome-Light = 1 siren chirp / WindowRoll-UP = 2 chirps)-Configures the alarm’s “Black/White” wire to operate the:a. Dome-Light: Supply a (-) output when the alarm is Disarmed to illuminate thevehicle’s Dome-Light for 30 seconds through the use of a relay, orb. Window Roll-Up or accessory: Supply a (-) output for 30 seconds when thealarm is Armed to operate a Window Roll-Up module or other accessory.12. 3rd Channel Output: (•Momentary = 1 siren chirp / Window Roll-UP =2 chirps)-Configures the alarm’s “Pink” wire to operate an:a. Accessory : Supply a (-) output as long as the small “4th” button on the remotecontrol, is pressed & held while the vehicle’s ignition is “Off”, (max 30 seconds).b. Window Roll-Up or accessory: Supply a (-) output for 30 seconds when thealarm is Armed to operate a Window Roll-Up module or other accessory.13. Ignition Door Lock/Unlock: (•On = 1 siren chirp / Off = 2 chirps)- Configures the alarm to Lock the vehicle's doors when the ignition is turned “On” and Unlock the vehicle’s doors when the ignition is turned “Off”.14. “RFID” Add-On to Anti-Hijacking: (On = 1 siren chirp / •Off = 2 chirps)- Adds an “RFID” layer to both the Ignition & Open Door activated Anti-Hijackingfeatures. (Note: Special RFID remote control required)JUMPER ON SIDE OF ALARM BRAIN:Lock Pulse Time: ( • .80 seconds = Jumper “In” / 4 seconds = Jumper “Out”)-Determines the length of the alarm’s door lock/unlock pulse output.0.80Sec4.0Sec-Press hold TX' button 5 seconds,LED will flash,TX'RFID is turned "On".-Press hold TX' button 5 seconds,LED will solid,TX'RFID is turned "Off".12
Brown/White :This wire can be configured (Programmable feature # 6), to honk the hornin addition to the Brown wire operating the siren, or take over all of the Siren’s functions SO THAT NO SIREN IS NECESSARYCafé/con lista Blanca:Este cable se puede programar (función #6), a sonar el claxon en conjunto al cable Café operar la Sirena, O TOMAR TODAS LA FUNCIONES DE LASIRENA PARAQUE NO HAGA FALTA INSTALAR SIRENA.Brown/White - Café/Blanco = (-Horn Output, Salida claxon -)Black/White - Negro/Blanco = (-Dome-Light , Salida luz de cabina-)Grey - Gris = (-Auxiliary output, Segundo canal auxiliar-)Pink - Rosado = (-3rd channel output, Tercer canal-)Orange - Naranja = (-Starter Kill, Corte -)Blue - Azul = (-Trigger Input, Disparo -)Violet - Violeta = (+Door Input, Puerta +)Green - Verde = (-Door Input, Puerta -)Yellow - Amarillo = (+Accessory, Ignición +)Brown - Café = (+Siren/Horn, +Sirena/Claxon)Red - Rojo = (+12 Volts, +12 Voltios)White - Blanco = (+Flashing Lights, +Luces)Black - Negro = (-Ground, -Tierra)Valet/Override Button0.80Sec4.0SecDoor Lock Pulse Time JumperLED Status IndicatorOptionalSensorK9 SSGreen - Verde = (-Lock, -Cierre)Red - Rojo = (+12 Volts)Blue - Azul = (- Unlock, - Apertura)Siren Pin-Switch (-) Pin-Switch (-)Battery Pin-Switch (+)15 Amp+ Parking Lights / LucesRelayTrunkReleaseRelayRelay Car Horn /ClaxonDome-Light(-)AuxiliaryOutputPage 132
Page 14Negative Trigger System / Sistema Negativo:Doorlock SwitchGroundVehicle's DoorlockRelay Control UnitLockUnlock Lock wire /Cable de cierreUnlock wire/ Cable de Apertura+DoorlockActuators5 Wire Reversal (Rest at ground): Cambio de Polaridad:Positive Trigger System / Sistema Positivo:Doorlock Switch(+) 12 VoltsVehicle's DoorlockRelay Control UnitLockUnlock Lock wire /Cable de cierreUnlock wire/ Cable de Apertura+DoorlockActuators(+)12 VoltsUnlock UnlockPassengerDoorlock SwitchDriverDoorlockSwitch - Lock wire "Switch" side. -cable de Cierre, lado del switch -Lock wire "Motor" side. -cable de Cierre, lado MotorCut both Lock andUnlock wires in car- Unlock wire "Switch" side. -cable de Apertura, lado del switchLock Lock- Ground- Unlock wire "Motor" side. -cable de Apertura, lado MotorGreenBlueFuse308787a308787aGreenBlueLock Relay Unlock RelayFuse308787a308787aGreenBlueLock Relay Unlock Relay(+)12 VoltsDoor Locking Systems / Sistemas De Cierre3
Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu