BK Technologies GMH599 VHF Mobile Transceiver User Manual Section 6

Users Manual Section 6

BK RADIO

Page 6-1

SECTION VI

ILLUSTRATED PARTS LIST

6.1 INTRODUCTION

This section helps you identify parts used in BK Radio’s GMH mobile Transceiver. It includes

Replacement Parts Lists for all major assemblies arranged from the Final Assembly down to an individual

part level. Each List is followed by the corresponding Assembly Drawing (if required), Schematic Diagram

and Parts Placement.

Parts itemized in the various lists meet BK Radio’s design specifications and are the recommended

replacement parts.

6.2 PARTS LIST DESCRIPTION

Replacement Parts Lists contain specific information on each part in the corresponding Assembly

Drawing and Schematic Diagram. Sub-assemblies are also listed by a part number, helping you find the

correct sub-assembly parts. Each part and Sub-assembly has a 12-digit number that is unique. Parts are

usually identified by their schematic reference number or, in the case of an assembly, their item number.

6.3 ASSEMBLY DRAWING SYMBOLS

Several symbols are used in the Assembly Drawings. One symbol helps to identify parts (or items) that

are listed in the Drawing's corresponding Parts List. Another symbol references a specific Note that is on

the Drawing. The symbols are (with examples):

32 — refers to Item 32 in the Replacement Parts Lists

ITM 32 — also refers to Item 32 in the Replacement Parts Lists

6— refers to Drawing's Note No. 6

L1 — refers to Part L1 (also its Schematic Reference No.)

J14 — refers to Part J14 (also its Schematic Reference No.)

2REQ'D — indicates two of the Items are required in the Assembly

General Information GMH Series VHF Radio

Page 6-2

BK RADIO

GMH Series VHF Radio General Information

BK RADIO

Page 6-3