Users Manual
BM-150R
1
This manual is protected by Copyright Laws.
This manual has been produced by Bluebird Soft Inc. Please note that there may be editorial mistakes or possible omission of information.
Programs embedded in the product are legally protected. Unauthorized copying, transferring, or deletion is strictly prohibited.
There may be a few operational problems caused by the application environment, application program, or other surrounding machinery.
This product generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. Service related to human security is not provided as there may be a possibility of
confusion in the electric waves of the product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
PIDION is a Leading Brand in the mobile industry. Bluebird Soft Inc. is a trusted global company which represents
high technology and is currently registered worldwide with its PIDION trademark legally protected by law.
Registered Trademark
Information to the User Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
2BM-150R Series Manual
FCC RF EXPOSURE INFORMATION
WARNING! Read this information before using your phone
In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted
an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters.
Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this
phone complies with the FCC guidelines and these international standards.
CAUTION : Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes
into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back of the phone kept 1.5 cm. from the body.
SAR compliance for body-worn operation is restricted to belt-chips, holsters or similar accessories that have no metalic component in the
assembly.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
BM-150R (GSM) Device(FCC ID: SS4BM150R) has also been tested against this SAR limit. The highest SAR value reported under this standard
during product certification for use at the ear 0.724 W/kg and when properly worn on the body is 1.27 W/kg.
BM-150R (1xEVDO) Device (FCC ID: SS4BM150RE) has also been tested against this SAR limit. The highest SAR value reported under this
standard during product certification For use at the ear 0.897 W/kg and when properly worn on the body is 1.21 W/kg.
WARNING
Any changes or modification not expressly approved by the party responsible could void the users’ authority to operate the device.
Knowing the product
BM-150R
3
I hereby declare that the product.
Satisfies all the technical regulations applicable to the product
within the scope of Council
Directives 99/5/EC, 89/336/EEC, and 73/23/EEC:
All essential radio test suites have been carried out.
NOTIFIED BODY : EMCCert Dr.Rasek
- Address
Boelwiese 5, 91320 Ebermannstadt, Germany,
Identification Number: 0678
MANUFACTURER or AUTHORISED REPRESENTATIVE :
- Address
Bluebird Soft., Inc.
558-5, Sinsa-dong, Kangnam-gu, Seoul, Korea
This declaration is issued under the sole responsibility of the
manufacturer and, if applicable, his authorized representative.
POINT OF CONTRACT:
Declaration of Conformity
Model
Type
BM-150R(GSM)
PDA
Radio
EMC
Safety
Health
ETSI EN 301 511 / ETSI EN 300 328
ETSI EN 301 489-1/7/17, EN 55022, EN 55024
EN 60950-1
Council Rec. 99/519/EC
Company
Phone number
Fax number
Bluebird Soft., Inc.
+82-2-548-0740
+82-2-548-0870
4BM-150R Series Manual
TTaabbllee ooff CCoonntteennttss
I. Getting Started
1. Activating Your Phone
2. Synchronize with ActiveSync
II. Understanding Your Phone
1. Features of Your Phone
2. What’s in the box?
3. Closed View of Your Phone
4. Install/Remove the Battery
5. MiniSD Memory Card
6. Battery & LED status
III. Learning the Basics
1. Powering On/Off the Phone
2. Resetting Your Phone
3. Starting your PDA
4. Using the Stylus
5. Entering Text
IV. Call Functions
1. Turning the Phone Functions On/Off
2. Phone Program
3. Calling and Receiving
4. Contacts
V. Camera
1. Using the Camera
VI. DMB
1. Opening & Closing
2. Screen Configuration
3. Operation Guide
4. Capture Screen
5. Setting
VII. Changing Your Settings
1. Personal Tab
2. System Tab
3. Connections Tab
VIII. Information
1. Safety Information
2. Troubleshooting
3. Customer Service
4. Service Center Information
Certification of Quality
Authenticity of Facts
5
5
6
7
7
8
9
10
10
11
12
12
12
13
13
14
16
16
17
18
19
20
20
21
21
22
23
24
25
26
26
28
31
34
34
35
36
37
39
40
BM-150R
5
II.. GGeettttiinngg SSttaarrtteedd
Activating Your Phone1
The plug-in SIM card and its contents can be easily damaged by scratches or bending.
Use caution when inserting or removing the card and keep all SIM cards out of reach of children.
[Remove the Battery]
1. Push down using both thumbs to
remove battery cover.
2. Raise the battery by using the
groove on the lower part to
remove the battery.
[Insert the SIM Card]
Insert the SIM card with its gold
contacts face down.
Its cut off corner should match the
cut off corner in the slot.
[Remove the SIM Card]
To remove the SIM card, lightly
slide it away from slot.
[Install the Battery]
1. Put the battery in line with the
left part of the PDA and then
push the right part to lock.
2. Put the projected part of the
cover on top of the groove in the
back and then push carefully
with both thumbs.
6BM-150R Series Manual
II.. GGeettttiinngg SSttaarrtteedd
Synchronize with ActiveSync2
1. Installing Microsoft ActiveSync on Your PC
Install the Microsoft ActiveSync from the supplied Getting Started CD.
You can also download the latest version of ActiveSync from the Microsoft website.
2. Connecting the PDA to Your PC
After installation connect the PDA to the PC according to the following instructions:
Connect the cable to the PC Turn on the PDA Connect the cable to the PDA
If connected properly, the wizard for the setup synchronization will start.
(If the connecting cable is moving or loose, it may cause an automatic stop of the Active Sync
or re-synchronization. Please re-connect the cable again.)
3. Setting up a Partner Relationship
Standard Partner Relationship: Proceed according to the explanation of the wizard for
setting up synchronization.
- Besides standard functions, data such as favourites, address, schedule, work, and incoming
mail will all be synchronized with the latest information maintained.
Guest Partner Relationship : Choose ‘Cancel’ while proceeding with Wizard to set up
synchronization.
- Fundamental functions such as copying or transferring of data in between the PC and PDA,
program installation, and so forth may be used.
This is based on Microsoft ActiveSync 4.2 English Version. If you use a different version, it may differ from the
instructions of the manual.
You may download the most recent version from the Microsoft website in case you lose the CD bundle.
Bluetooth 1.2 Class 2
T-DMB (Korea Only)
SiRF lll Chip set
1.3M Pixel
MiniSD
1.1 Client / Host
1,230mAh Li-on
72(W) x 134(L) x 18.5(T) mm
IrDA Port, 24Pin Port
4° to 122° F / -20° to 50° C
1.2m concrete drop
Choosing Sound, Vibration or LED
BM-150R
7
IIII.. UUnnddeerrssttaannddiinngg YYoouurr PPhhoonnee
Features of Your Phone1
Division
GSM
CDMA
WLAN
Bluetooth
CPU
OS
Memory
Display
Communication
Quad Band (850/900/1800/1900 MHz)
GPRS Multislot Class 12, Class B
Single Band (Cellular, KPCS Band)
CDMA - EVDO
Frequency : 2,402MHz ~ 2,480MHz
Number of channels : 13
Antenna power : 10mW and less
Modulation type : G1D, D2D
Used certified module (SWL-2560S)
Frequency : 2,402MHz ~ 2,480MHz
Number of channels : 79
Antenna power : 0.01mW and less
Modulation type : F1D
Intel PXA270 520MHz
Windows Mobile 5.0
RAM: 64MB or 128MB, ROM: 512MB
Select from the following.
3.5” QVGA 240x320 Touch Screen
3.5” VGA 480x640 Touch Screen
Select from the following.
GSM & WLAN(802.11b/g),
CDMA 1x & WLAN(802.11b/g),
CDMA 1x-EVDO & WLAN(802.11b/g)
Specification Bluetooth
DMB
GPS
Camera
Slot
USB
Battery
Dimension
Interface
Operation Temperature
Environment
Alarm & Notifications
The FCC ID SS4BM150R can only support GSM.
The GPRS/EDGE and WLAN can not be operated simultaneously .
The FCC ID SS4BM150RE can only support CDMA 1xEVDO.
The CDMA 1xEVDO and WLAN can not be operated
simultaneously.
The BM-150R 1xEVDO does not support VOFI, VOWLAN.
8BM-150R Series Manual
IIII.. UUnnddeerrssttaannddiinngg YYoouurr PPhhoonnee
What’s in the box?2
[Main Body] [Stylus Pen]
[Standard Battery] [USB Cable]
[Earphones] [Adaptor]
[MS Companion CD]
[LCD Protect Film]
Thank you for purchasing a PIDION Product. Please make sure all the above components are included.
The pictures and photos in this manual may slightly differ due to model compositions.
(When purchasing extra accessories please go to your nearest dealer.)
BM-150R
9
Closed View of Your Phone3
24pin Charging Terminal
Power
ON/OFF Key
Camera
Key
IrDA PORT
MiniSD
Card Slot
Camera
Battery
Cover
Radio
Function
LED
End Key
4-Way
Navigation
Key
Right Soft Key
Microphone
Send Key
OK Key
Receiver
Battery
Charge
LED
Left Soft Key
Headset
Jack
Hold/Unhold
Volume
Key
Speaker
10 BM-150R Series Manual
Install/Remove the Battery4
We strongly recommend that you use the adapter which was purchased with the product for charging the battery.
However, the 24 pin charger of an ordinary mobile phone may also be used to charge the PDA battery. (Due to the
characteristics of a standard charger, there may be small discharge of electricity despite the charger being fully charged.)
[Install the Battery]
1. Put the battery in line with the
left part of the PDA and then
push the right part to lock.
2. Put the projected part of the
cover on top of the groove in the
back and then push carefully
with both thumbs.
[Remove the Battery]
1. Push down using both thumbs to
remove the cover.
2. Raise the battery by using the
groove on the lower part to
remove the battery.
MiniSD Memory Card5
Make sure that the gold plate terminal of the memory card
is pointed towards the back when inserting into the MiniSD
slot. For removal push the exposed part of the memory
card. It will pop out.
Frequent insertion/removal of the memory
card, or applying too much force to it, may
cause the product to malfunction.
Card removal and turning the power off/on
using the memory card may result in loss of
data or cause the memory card and PDA to
malfunction.
Important data should always be saved on the
computer. The company will not take any
responsibility for the loss of data on this
product.
If the memory card cannot be removed easily,
instead of removing it with force, inquire to
the service center for its removal, or ask for an
exchange or refund of the product.
IIII.. UUnnddeerrssttaannddiinngg YYoouurr PPhhoonnee
BM-150R
11
Battery & LED status6
Charge on a connection
from the USB
Charge on a connection
to the Adapter
Maximum hours of use
when charged
Approximately 4 hours
Approximately 2 hours
Standby: 15 hours
Phone call: 5 hours 30 minutes
[ Hours for Charging & Use ] [ Safety Notice for Using the Battery ]
While Charging
After Charging
Red
Green
[ Battery Charge LED]
Division
In Use
Standby
Searching
WLAN
Blue
-
Bluetooth
Blue
-
-
DMB
Blue
-
-
Phone
Amber
Blinking Slowly
Blinking Quickly
[ Radio Function LED ]
If the battery is running low on power, a warning notice may appear on the monitor with a warning sound.
Charging and usage hours may differ from that of the manual, according to the user’s application environment.
New batteries are not charged, therefore you must fully charge the battery before use.
Batteries are expendable products and with regular use over time
they will lose there ability to fully charge.
The battery may overheat from its application environment.
If the fully charged battery lasts only half the time from its
originally purchased state, you should purchase a new battery.
(Batteries have a 6 month period guarantee.)
The time that a battery may last may differ according to the
lighting of the monitor, temperature, length of its use, etc.
Battery exhaustion may be considerably faster in areas where
Bluetooth, wireless Internet, or phones cannot be used. (Bluetooth,
wireless Internet, and phone functions should be turned off when
these functions are not in use. This will help save the battery.)
Leaving the battery on the re-charger after it has been recharged,
will not damage the battery.
If the cables to the main body are not properly connected, the
lights on the main body may not come on during the recharging
process. Always check and make sure that all cables are connected
properly.
Do not remove the battery while it is in use. This may result in
damage of data and the PDA may be initialized.
If the battery is not sufficiently charged, the PDA may turn off
while in use. Always check and make sure that the battery your
using has been sufficiently charged.
12 BM-150R Series Manual
Powering On/Off the Phone1Resetting Your Phone2
The power button is located on the right side of the
product.
The power button should be pressed shortly.
If the power button is pushed for more than 3 seconds, the
LCD Back Light will turn On/Off.
Even when the power is turned off, if the GSM modem is
turned on the PDA will also power on automatically so you
can answer the phone.
IIIIII.. LLeeaarrnniinngg tthhee BBaassiiccss
Power
Button
[Soft Reset]
Exemplary Situations
When memory conversion is not processed smoothly due to
long hours of program use, or when there is an unexpected
error resulting in a clash between programs, and so forth.
(This function is equivalent to rebooting the PC)
Process Method
Press the reset button located at the back of the body using
the Stylus Pen.
[Hard Reset] Send Key + OK Key + Reset Button
Safety Precautions : All unsaved files will be lost
and programs currently in use will be shut down
when the screen is initialized.
Safety Precautions : All data will be lost and all
programs will be initialized as they were when
first purchased. Please note that all addresses,
schedules, and information saved in the memory
of the PDA will be lost when processing hard reset.
Remove Battery Cover
Reset Button
BM-150R
13
Starting your PDA3Using the Stylus4
If the cross mark is not accurately pressed, the same screen may appear repeatedly.
Please use only the Stylus Pen and refrain from using pins or sharp objects.
(Using sharp objects may cause damage to the LCD monitor.)
1. Turn the PDA power on.
2. Windows Mobile Logo will appear.
3. Touch the cross mark on the screen and follow it.
4. Proceed by following the instructions on the screen.
5. After finishing the setting, the ‘today’ screen will
appear.
The provided Stylus pen may be used to directly process a
program and input information on the touch screen.
Pressing
This means using the Stylus pen by pressing it one time to
open, close, or cancel something.(This is equivalent to
pushing the right button of the mouse when using the
computer.)
Dragging
Upon choosing an item, you can select the area of the item
from the list by using the Stylus pen. (This is equivalent to
mouse drag when using the computer)
Pressing for a While/Few Seconds
If you want to see extra functions of the chosen item(s),
push the Stylus pen for a few seconds to see the pop-up
menu screen. (This is equivalent to clicking the right button
on the mouse when using the computer.)
14 BM-150R Series Manual
Entering Text5
IIIIII.. LLeeaarrnniinngg tthhee BBaassiiccss
There are five different character input methods
available.
They are:
1. Block Recognizer
2. Keyboard
3. Letter Recognizer
4. Transcriber
This input method uses the traditional writing area
box split in the middle.
The left side is used to write letters and the right
side is for number entry.
Symbols and common functions are located in
other smaller boxes located in the right of the
writing box area.
[ Selecting Text Input Mode ] [ Block Recognizer ]
BM-150R
15
This input method displays an on-
screen keyboard that can be used to
input characters by tapping the screen
using the stylus pen.
This option allows you to enter text
using your own handwriting.
The screen is divided into three
different areas. A capital letter area,
small letter area, and a number area.
Characters are entered by printing
letters in each area. The character is
then analyzed and typed on the
screen automatically.
The transcriber option is similar to the
letter recognizer, except instead of
entering characters into a designated
area, you can enter entire words and
sentences using your own
handwriting.
Transcriber supports both printing
and cursive writing styles and then
automatically types the information
on the screen.
[ Keyboard ] [ Letter Recognizer ] [ Transcriber ]
16 BM-150R Series Manual
Turning the Phone Functions On/Off1
IIVV.. UUssiinngg tthhee PPhhoonnee
If the end key is pushed for more than 3
seconds, the Phone Functions will turn On/Off.
Touch this part or
select [Wireless Manager] from
[Start] [Settings] [Connections]
tabs
Touch this part to turn On/Off.
[ Using the Key ] [ Block Recognizer ]
Please refrain from using the phone while driving or walking. This is very dangerous and may be illegal in your country.
End Key
BM-150R
17
Phone Program2
[ Key ] [ ’Today‘ screen ] [ ’Phone‘ screen ]
Method of Operation
Press Send Key on the PDA.
Touch [Phone] on the lower
part of the ‘Today’ screen.
Exit Method
Press End Key on the PDA.
Touch the [X] button on the
upper right part of the
‘Phone’ screen.
Please refrain from using the phone while driving or walking. This is very dangerous and may be illegal in your country.
18 BM-150R Series Manual
Calling and Receiving3
IIVV.. UUssiinngg tthhee PPhhoonnee
Calling
1. Call the number by using the PDA keypad input screen, and then press Send Key.
2. Push the [Talk] button by using the keypad on the screen.
Receiving
1. Press Send Key on the PDA.
2. Touch the [Answer] button on the lower left part of the screen.
Refuse Calls
- Touch the [Ignore] button on the lower right part of the screen to refuse a call.
(Pressing the volume controller on the left side of the PDA will only mute the bell.)
Finishing the Call
1. Press End Key on the PDA.
2. Touch the [Finish] button appearing on the phone screen.
Please refrain from using the phone while driving or walking. This is very dangerous and may be illegal in your country.
BM-150R
19
Contacts4
Using Contacts
Contacts may be searched by inputting the name/number or by touching the
tab button.
Contacts Menu
- New Contact : Register new contact.
- Copy/Delete Contact : The chosen contact will be copied/deleted.
- View By : Contacts will be indicated according to name/company.
- Filter : Filter mode can be inputted to show only relevant items.
Various options can be used by touching the contact for a few seconds.
- Calling a company/home/mobile number : Calls will be made to the enlisted
numbers.
- Sending E-mails : E-mails may be sent to the enlisted e-mail address.
- Sending Text Messages : Text messages may be sent to the enlisted numbers.
Registration of New Contacts
1. Register new contacts by touching [New Contact].
2. Input the name and occupation into the appropriate office columns.
Please refrain from using the phone while driving or walking. This is very dangerous and may be illegal in your country.
20 BM-150R Series Manual
Using the Camera1
VV.. CCaammeerraa
If the battery does not have enough power, the camera might automatically turn off or may not start. It will
automatically power off if it is not used for more than 1 minute. The camera will automatically exit when operating the
DMB. The Camera and DMB cannot be processed simultaneously.
Press either the Camera Key on the
right side of the product, or launch
[Start] [Programs] [Camera]
Set Screen
Close Camera Program
Adjust Brightness
Set Resolutions: 320*240~1280*960
Special Effects: Normal,
Gray, Sepia, Negative
Image Quality Setup :
High, Medium, Low
Photograph
Photo Album
Press the viewer button on the upper
right hand corner of the screen.
Set Screen
Close the Photo Album
Brief View
Zoom In/Zoom Out
Delete
Move to camera mode
BM-150R
21
VVII.. DDMMBB
Opening & Closing1
If executing other programs while running the DMB program, normal program operation is not guaranteed.
Avoid DMB viewing while performing activities such as driving or walking, as doing so can be dangerous.
Applying excessive force to the antenna can result in its damage. If opening the camera during DMB operation, the DMB
broadcast automatically ends, as simultaneous running of the camera and DMB function is not possible.
You can watch and listen to terrestrial DMB and radio.
How to open
[Start] [Program] [PidionDMB]
How to close
1. Closing the program is identical to the process for other programs.
(Press the “X” button at the upper right corner of the program window.)
2. The program closes when the “OK” button of the keypad is pressed.
Fully extend the antenna for reception when viewing terrestrial DMB broadcasts, and
when not viewing, collapse and insert the antenna within the main unit.
For product with DMB option.
22 BM-150R Series Manual
Screen Configuration2
VVII.. DDMMBB
If executing other programs while running the DMB program, normal program operation is not guaranteed.
Avoid DMB viewing while performing activities such as driving or walking, as doing so can be dangerous.
Applying excessive force to the antenna can result in its damage.
[ Vertical Mode ] [ Horizontal Mode ]
Upper Display Area
DMB Status Display
Control Menu Display
BM-150R
23
Operation Guide3
When opening the DMB program, the message “The player is being closed due to initialization failure. Check the player
installation file again and retry.” may appear. In such cases, the DMB program can be used normally once again, after
removing any unnecessary programs that may have been installed in the screen on the same day. Such problems can
result due to limitations of Microsoft Windows Mobile 5.0, and thus, maintaining a non-excessive quantity of installed
programs is recommended.
Icon
Change channels.
Adjust volume.
On TV: Set screen size.
On Radio: Off screen
Set DMB options.
Save screen shots.
Description NameIcon Description
Enlarge screen size to
full.
Switch from Radio
Mode to TV Mode.
Switch from TV Mode
to Radio Mode.
Mute volume
regardless of level.
Adjust volume.
Full Screen
TV Mode
Radio Mode
Mute
Volume Bar
Name
Left/Right
Up/Down
Toggle
Setting
Capture
24 BM-150R Series Manual
Capture Screen4
VVII.. DDMMBB
Division
Capture Type
Folder to save
File Attributes
Description
Press the capture icon.
Within the My Documents folder.
File Name: Date and time of capture
File Extension: JPEG
Capture Size: 320 x 240
If executing other programs while running the DMB program, normal program operation is not guaranteed.
Avoid DMB viewing while performing activities such as driving or walking, as doing so can be dangerous.
Applying excessive force to the antenna can result in its damage.
BM-150R
25
Setting5
If executing other programs while running the DMB program, normal program operation is not guaranteed.
Channel searching times can be prolonged in areas that do not receive DMB broadcasting or in locations where
reception is weak. In addition, the reception of DMB broadcasting may be impossible in areas where radio waves are
blocked, such as basements and interiors of certain buildings.
Name
Full Screen
Mode
DMB TV/Radio
Channel Search
DMB TV/Radio
Channel List
CPU Mode
Automatic
Change
Screen Description
Set orientation to left hand or right
hand in full screen mode.
Perform an automatic search of the
current region for TV/radio
channels that can be added.
Lists divided by TV and radio
channels that are results of a
channel search; double-click any
entry to view.
When checked, the turbo mode is
engaged automatically when
viewing DMB broadcasts to
facilitate smooth viewing.
26 BM-150R Series Manual
Personal Tab1
VVIIII.. CChhaannggiinngg YYoouurr SSeettttiinnggss
[Start] [Settings] [Personal] [Buttons]
Method of changing the shortcut key allocation program:
Choose the button that you want to set up, then choose
the program you need from the allocation program below.
Programs you can choose: Aside from the basic programs,
you can institute personally installed programs.
Defining Buttons mode: Front navigation key provides
favorite buttons for quick access or navigation.
[Start] [Settings] [Personal] [Menus]
Programs that can be used will appear on the check list.
The checked icon will appear on the title bar of the start
menu. (You may check up to 7 items.)
[ Buttons ] [ Menus ]
This is used for setting up the start
menu of the title bar.
BM-150R
27
The skin file (*.TSK) will appear on the background image
setup after it has been printed into ‘My Documents’.
[ Today ]
You may choose the skin and the
surrounding screen according to
your taste.
[Start] [Settings] [Personal]
[Today]
It will appear on the ‘Today’ screen according to the order
that it appeared on the screen. This order may be changed
by moving it up or down.
Choose the categories that appear
on the [today] screen.
[Start] [Settings] [Personal]
[Today]
28 BM-150R Series Manual
System Tab2
VVIIII.. CChhaannggiinngg YYoouurr SSeettttiinnggss
[Start] [Settings] [System]
[Memory]
This shows the current status of the
memory (the memory used and
remaining).
[ Memory ]
This indicates the present condition
of the Program Store (Used Capacity,
Remaining Capacity), and the Mini SD
memory card that is inserted into the
PDA.
This indicates the current operating
program lists, so you may choose to
stop all or part of the programs.
BM-150R
29
[Start] [Settings] [System] [Screen]
The screen may be converted to portrait or landscape
(righthanded, left-handed). You may readjust the stylus
point by pressing the [Align Screen]. The text size that
appears on the screen may be adjusted in 5 stages.
Choose the program that needs to be deleted from the
list and press [Remove] for an automatic deletion.
[ Screen ] [ Remove Programs ]
This indicates the list of programs
installed personally or by a group.
[Start] [Settings] [System]
[Remove Programs]
Name
Power On/Off
Recommended
frequency Selection
Frequency Selection
Screen Description
When power is on: ON
When power is off: OFF
98.9, 100.7, 106.5
Select from 3 recommended
frequencies. (Select “NOT USE” if none
of the 3 recommended frequencies are
to be used.)
Use the left/right buttons to select a
frequency within the range of 88.1 ~
107.9 MHz.
30 BM-150R Series Manual
System Tab2
VVIIII.. CChhaannggiinngg YYoouurr SSeettttiinnggss
[Start] [Settings]
[System] [FM Transmitter]
The FM Transmitter can be
used to listen to music files
in a PDA via a car stereo.
[FM Transmitter ]
BM-150R
31
Connections Tab3
Turn on Bluetooth : Setup as Use/Non-use.
(The removal of this function when not in use may
prolong the life of the battery.)
Make this device visible to other devices : This
enables the search of BM-150R from other devices.
It scans the
surrounding
Bluetooth device
and conducts
pairing.
[ Bluetooth ]
Setup for the communication
of Bluetooth equipment.
[Start] [Settings]
[Connections] [Bluetooth]
Bluetooth Setup Method
1. On touching the [Add new device...], it will
scan the surrounding Bluetooth device.
2. Select the device to connect and press
[Next].
3. Input the pass key to setup for a secured
connection and then choose [Next]. (Check
the relevant device manuals, as the pass
key for each device is different.)
4. Check the indicated name and see whether
the connecting operation is correct. Then
select [End].
5. The process has been successfully
completed when the model no. and icon of
the product appears on the screen.
The pairing method may be different for each Bluetooth device. Please check the manual.
32 BM-150R Series Manual
VVIIII.. CChhaannggiinngg YYoouurr SSeettttiinnggss
Wireless LAN Setup sets up the network card environment
which connects it to the surrounding AP through the
setting up of the wireless LAN.
[ Wi-Fi ]
Set Up Wireless LAN through Wi-Fi.
[Start] [Settings]
[Connections] [Wi-Fi]
Set Up Method for Wireless LAN
1. If you turn on Wi-Fi from Wireless Manager, it will search
the AP within the vicinity and show it on the screen.
2. Choose the AP from the wireless network list indicated
and press [Connect].
- If the AP information cannot be received please set it up
manually.
1. Touch [Add New...] from the Configure Wireless
Networks window.
2. Input the AP name of [Network name].
Then check the AP setup content.
3. Press [Finish].
4. The AP name will appear on the screen list.
5. The process will be completed by pressing [Connect].
Connections Tab3
BM-150R
33
[ Wireless Manager ] [ USB-PC Connect ]
[Start] [Settings] [Connections] [Wireless Manager]
By touching [All], you may start 3 functions at the same
time. [Wi-Fi], [Bluetooth], [Phone] may be turned on or off
separately. When turning on these functions, a detailed
setup is possible through the [Settings] that appears on the
lower part of the screen. Also, turning off the [Menu]
button on the lower right of the screen may be used to set
up individual settings.
If you decide to uncheck [Enable advanced network
functionality], the PC will not synchronize.
If ActiveSync does not synchronize after a right
connection to the PC, please recheck the checking status.
You may set up the sync
environment with the PC.
[Start] [Settings]
[Connections] [USB to PC]
34 BM-150R Series Manual
Safety Information1
VVIIIIII.. IInnffoorrmmaattiioonn
1. Safety Instructions for Recharging Batteries
If the main body of the product or the battery has been submerged
under water, do not attempt to dry it by heater or microwave. (Wet
PDA or battery changes the label color. Malfunction with colored
label can not be serviced under warranty service.)
Please make sure objects such as necklaces or rings are not placed
near the battery connection terminal (the metal plate parts) which
may transfer electricity to it.
When using a battery after it has not been used for a long period
of time, you should leave it in room temperature after fully
recharging it. Extended periods of not using the battery will affect
its capacity and durability.
Even if the battery has been recharged, its possible hours of use
may shorten due to the lowering of electric voltage.
Please use only the instructed type of battery and adapter. Do not
use any products of the PDA for any other purpose other than
those specified in the users manual. (If these instructions are not
followed, it might result in an explosion of the product and may
shorten the lifespan of the battery, PDA, or adapter.)
2. Safety Warnings for Use of the Phone
Using the phone while driving (bicycles, automobiles, motorcycles,
etc.), walking, climbing, and so forth is strictly prohibited.
3. Other Instructions
Data may be damaged due to careless use of the customer or
during the process of repair. It is vital that such data is separately
kept, as the company will not take any responsibility for damages
of these accounts.
Upon malfunctions, do not reconstruct or dismantle the product.
Immediately send these components to the Customer Service
Center.
Please turn off the power in explosive areas (in planes or hospitals)
as there may be danger due to electronic wave problems.
Please stop using the PDA and consult a medical expert in case of
any allergic reactions to the product.
Please do not dye or paint any part of the PDA. This may damage
the product.
High temperatures or high humidity may damage the product.
The screen may be damaged if sharp objects such as pins, nails or
pens are used instead of the Stylus Pen.
Please avoid vibrations or shocks. When not in use, please place in a
safe spot after unplugging the power cable.
Place the adapter in a firm position so it will not move. If smoke or
an irregular sound comes from the PDA, immediately turn it off,
unplug it, and separate the adapter plug. Also remove the adapter
plug in case of thunder and lightning.
There will be no service offered relating to human security, as there
may be a possibility of confusion in the electric waves of the
product.
Please abide by these instructions as they will
ensure safe and proper use of the product.
BM-150R
35
Troubleshooting2
Q : What should I do if the PDA gets wet?
A : First, remove the battery from the PDA and lay it out to dry.
If it does not operate properly after being dried, then the
main board or other components may need to be
exchanged. Please visit your nearest customer service center.
Q : The PDA Power does not come on.
A : Recharge for a certain amount of time and check it again. If
it still does not power on, please visit your nearest customer
service center for advice.
Q : The PDA does not recharge.
A : Check whether the adapter of the PDA and PC has been
connected properly and wipe the charge terminal if needed.
If it still does not operate properly, please visit your nearest
customer service center for advice.
Q : Calling and receiving calls are not smooth and the
connection is frequently cut short while talking on the
phone.
A : The electronic wave condition might be unstable. Move to a
different area and try again.
Q : Voice reverberates while talking on the phone.
A : Adjust the volume or try again after moving to a different
area.
Q : The PDA has been over heated.
A : Such conditions may arise due to long hours of using the
phone, game, or internet. However, this will not effect the
functions of the product.
Q : The battery life span seems to have shortened.
A : Batteries are expendable products. Each time you use it the
life span of each new recharge will slowly become shorter
and shorter till it is no longer capable of being recharged
anymore.
36 BM-150R Series Manual
Customer Service3
VVIIIIII.. IInnffoorrmmaattiioonn
For any enquires of problems or inconveniences while using the
product please call +82-2-1588-1380.
[ Before Requesting After-Sales Service ]
Please backup all the data in your PDA before requesting
customer service.
We do not backup products registered at the customers service
center. Therefore, we are not responsible for any damage or
loss of data.
[ Bluebird Soft Customer Service ]
< Hours >
Mon.-Fri. : 9 A.M. ~ 6 P.M.
(GMT Time: +9 Hours)
Sat. : 9 A.M. ~ 2 P.M.
We are not open on Sundays
and National Holidays.
Phone : +82-2-1588-1380
Fax : +82-2-548-0870
E-Mail : gcs@bluebird.co.kr
Address : Customers Service
Center 2nd Floor, 558-8,
Sinsa-dong Gangnam-gu
Seoul, Korea
[ Registering for After-Sales Service ]
According to company rules, registering for customer service requires prepaid postal or delivery service, or visitation.
If you have purchased the product through any store other than Bluebird Soft, you have to be registered as a user in order to request
customer service.
In order to be registered as a user, call Bluebird Soft Inc. Call center number: +82-2-1588-1380.
When you register for customer service, you need to attach the purchase receipt with the product.
If you also post your name, contact number, address, and the problematic symptoms, the product will go through a faster and more
efficient examination.
You can either ask for service from the company you purchased it from, or talk directly to customers service at Bluebird Soft Inc.
Do not intentionally damage the label on the product.
Customers may have disadvantages if the label is damaged.
If you have to return the product to Bluebird Soft Inc., you need to put it in a safely packed box.
We do not warrant you for the damages incurred during transportation. Please use the original box of the product and bubble wrap it.
Transport the product safely. Bluebird Soft Inc. is not responsible for any components lost during the transportation.
BM-150R
37
Service Center Information4
[ Regulations on Free/Charging Repairs ]
Abiding to the Regulations of Customer Damage Repayment, Terms of Component Possession: 3 years
Exchange will be made to the same product. If an exchange for the same product is impossible, then it will be exchanged for a similar product.
However, there should be a repayment if the customer does not want an exchange for a similar product. Repayment amount should be the
amount written in the receipt. If the price on the receipt is higher than the price, than the usual price will be used as a standard, considering
that other incidental expenses had been added to the higher price.
Type of Customer Damage
When requesting important repairs within 10 days of purchase
Requesting important repairs within 1 month since purchase date
An important repair is needed after 1 month of exchange
When it is impossible to exchange within 1 month
Possible Repairs The same problem occurs 3 times
The same problem occurs 4 times
5 problems in all different parts
Impossible Repairs When the manufacturer has lost the product in
which the customer has requested for a repair
When it is impossible to repair within 1 month.
Impossible to exchange.
Contents of Compensation
Within the Term of Guarantee After term of guarantee
Exchange or Repayment
Exchange or Repair Free of Charge
Exchange or Repair Free of Charge
Repayment
Repair Free of Charge Charged Repair
Exchange or Repayment Charged Repair
Exchange or Repayment Exchange after depreciation of
the fixed price.
Repayment Exchange after adding 10% to
the depreciated price of the fix
price (the highest price-purchased
price).
38 BM-150R Series Manual
VVIIIIII.. IInnffoorrmmaattiioonn
Charged Service
1. If it is not a default, it will be charged when requesting for
after-sales service.
- Service request due to inappropriate use of the customer
- Loss of a PIN number
- Use of programs that might effect the program (over-clock,
forceful changes in the input of the system, personal
developments)
2. Default due to a mistake on the part of the customer
- Default due to inappropriate or careless use of the product
(dropping, submersion under water, shock, damage,
unreasonable operations, etc).
- Default due to a repair or unauthorized technician.
- Default caused intentionally or by carelessness of the
customer.
- Default due to the use of fraudulent parts or components.
3. Other cases
- Default due to nature (fire, damage due to sea wind, flood
damage, etc.).
- Expendable parts have exhausted there life (batteries,
antenna, or other component parts).
4. Regulations of treatment after charged service
- If the same default occurs on the part that had been
repaired within a 2 months(60 days) period, it will be
provided with free of charge repair service.
There will be no returning of goods or repayment upon
the following situation:
Removal of the sealing of the product if it had been sealed.
If the product has been damaged due to careless use by the
customer or due to a natural disaster (floods, rain, fire, etc.).
Loss of product or other components (CD, diskette, manual,
connecting cables, etc).
Damage to the product after 10 days of purchase, the product
will either be exchanged or provided with after-sales service
(note, returning of goods or repayment is not allowed).
BM-150R
39
Thank you for purchasing a product from Bluebird Soft Inc.
If a circumstance arises where you lose a receipt or the
certificate of guarantee, then the term of guarantee will be
calculated 3 months (certified by the number of the
manufacture, a certificate of inspection) after the date of
manufacture.
In case of accessories (such as batteries), only those that match
the sales list managed by the service center will be eligible for
customer service.
A repair or an exchange of batteries that does not match the
sales list of the service center due to the carelessness of the
customer will be fully charged.
< Guarantee of the Product >
1. Due to the regulations of the customer damage compensation,
Bluebird Soft Inc. (hereafter Bluebird) will guarantee the
products as follows:
2. If Bluebird had been notified of the defaults within the term of
the guarantee and the extent of guarantee, Bluebird will repair
or exchange those products according to the guarantee policies.
3. If Bluebird cannot repair or exchange defaulted products that
had been sent within the term of the guarantee, but falls
within the coverage of the guarantee policies, Bluebird will
compensate for the products.
4. Bluebird does not have any responsibility to repair, exchange, or
repay products until the customer returns the defaulted
product. The exchanged product will be provided with one that
has a quality equal to that of the brand new product.
5. Bluebird will guarantee those products that are from countries
in which Bluebird rightfully distributed the guaranteed
products.
6. Bluebird products may include parts, composition, accessories,
and materials that have the same capability as a brand new
product.
7. If it is a software product, guaranteed service will be offered
only in cases where the programming commands cannot be
launched. Bluebird cannot guarantee that the product will
never stop or there will never be an error when using the
product.
Name of Product PDA
Name of Model BM-150R
Date of Purchase
Manufacture Number
Place of Purchase
Term of Guarantee 1 year from purchase
CCeerrttiiffiiccaattee ooff GGuuaarraanntteeee
40 BM-150R Series Manual
AAuutthheennttiiccaatteedd ooff FFaaccttss
Name of Authenticator : Bluebird Soft Inc.
Name of Product : Wireless product for the wireless data communication system
Name of Model : BM-150R(GSM)
Date of Production : 2007. .
Manufacturer/Country : Bluebird Soft Inc./ Republic of Korea
Authenticator Identification : BBS
Customers Service Center Phone : +82-2-1588-1380
Bluebird constantly strives to bring utmost satisfaction to all our customers.
Hours
Mon.- Fri. : 9 A.M. ~ 6 P.M.
(GMT Time: +9 Hours)
Sat. : 9 A.M. ~ 2 P.M.
We are not open on Sundays and
National Holidays.
Phone : +82-2-1588-1380
Address : Customers Service Center
2nd Floor, 558-8, Sinsa-dong,
Gangnam-gu, Seoul, Korea
Customers Service Center