BQT Solutions MIP5 Contactless Smartcard Reader User Manual APPENDIX K INS Man

Download:
Mirror Download [FCC.gov]
Document ID	549506
Application ID	FEE+7Aqln5TrmsrcbP3Tcw==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.36kB (679544 bits)
Date Submitted	2005-06-08 00:00:00
Date Available	2005-06-01 00:00:00
Creation Date	2005-05-26 07:41:30
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-06-06 11:14:29
Document Title	Microsoft Word - APPENDIX K _INS_Man_.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Les Dickenson

FCC ID: QVL-MIP5
Page 1 of 7
APPENDIX J
INSTALLATION MANUAL
EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050
For further information or to find out more about our range of
smart card and biometric solutions, visit BQT Solutions on the web at:
www.bqtsolutions.com
Alternatively you can contact us at one of our global locations.
AUSTRALIA & ASIA PACIFIC
Level 4, 65 Epping Road
North Ryde NSW 2113 Australia
phone: +61 (0)2 8817 2800
fax:
+61 (0)2 8817 2811
email: info@bqtsolutions.com
UNITED KINGDOM & EMEA
Global House,1 Ashley Avenue, Epsom
Surrey KT 18 5AD United Kingdom
phone: + 44 (0)20 8823 9350
fax:
+ 44 (0)20 8823 9001
email:
info@bqtsolutions.co.uk
AMERICAS
15030 Ventura Blvd., Ste. 19-798
Sherman Oaks, CA 91403
United States of America
phone: +1 818 994 6888
fax:
+1 818 994 0225
email: infousa@bqtsolutions.com
CHINA
Suite 1208-1209, Offshore Oil Tower
583 LingLing Rad, ZuHui District
Shanghai, P.R. CHINA 20030
phone: +86 (21) 5425 5935
fax:
+86 (21) 5425 5936
email:
china@bqtsolutions.com
For Technical Support, email:
techsupport@bqtsolutions.com
miP5
MIFARE PROXIMITY READER
INSTALLATION GUIDE
miP5- Wiegand Unit
Version 1.1
NOTE: Information contained in this document is subject to change without notice.
Copyright © 2004 BQT Solutions Limited. All rights reserved.
BQT Solutions and the BQT Solutions logo are registered trademarks of BQT Solutions (Australia) Pty Ltd.
Mifare is a registered trademark of Philips Electronics.
miP5_8wire_v1.1: Last revised April 2005
Designed & Manufactured
in Australia
INTRODUCTION
Thank you for purchasing the miP5 Mifare Contactless Smart Card Proximity Reader.
®
WIRING SCHEMATIC
Reader
Connection
The miP5 is used in security applications and interfaces into Wiegand applications.
The miP5 is preset with BQT’s proximity 'Keys' and valid smart cards are issued with corresponding 'Keys' thus
ensuring that the system cannot be compromised.
The reader incorporates a LED to provide feedback to a person wishing to enter. The LED is controlled by the security
system.
RED
+12Vdc
BLACK
GND
YELLOW
BUZ
ORANGE
LED
GREEN
W0
WHITE
W1
Power Cable
+12Vdc
0V
Power
Supply
GND
BUZ
LED
W0
W1
Controller
Controller Cable
BROWN/W* T1
The miP5 is low profile and can be installed in new installations or as an upgraded reader in existing proximity
access control systems.
BROWN/W* T2
NOTE: If used with a shielded cable,
the shield is connected to Building GND.
* Tamper cable connection is optional.
INSTALLATION
NOTE:
The 0V or GND reference cable shall be included within the controller cable.
The 12Vdc power cable shall NOT be included in the controller Cable.
REGULATORY INFORMATION
CE Mark
The miP5 has passed all relevant tests and obtained CE approval.
C Tick
The miP5 has passed all relevant requirements for application of C Tick.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Any changes or modifications not expressively approved by BQT Solutions could void the user's authority to operate this equipment.
Remove the cover by holding the unit by the rim and pushing the reader out with your thumbs.
-1-
Designed & Manufactured
in Australia
- 10 -
WARRANTY
The miP5 comes with a 5 year warranty from the date of dispatch from BQT Solutions. The warranty is void if the
instructions contained within this manual have not been adhered to. See the BQT Solutions website for further terms
and conditions.
30
30
Wall View
SPECIFICATIONS
Reader Output
Wiegand
Power requirements
12Vdc
If necessary, drill holes for the mounting screws in the wall or mounting box on which the reader unit will be
placed. Use the template provided.
Normal
110mA
1.
Place the controller and power supply cable through the Grommit hole.
Activated
120mA
2.
Drill the holes as indicated by the arrows.
NOTE:
Make sure that you don't drill through the cable.
Current Consumption
Read range
20 - 60mm (0.8” – 2.4”)(typically)
Operating temperature
-10ºC to +55ºC (14ºF to 131ºF)
Relative humidity
90% max, operating non-condensing
Reader dimensions
90mm x 90mm x 20mm (3.54" x 3.54" x 0.79")
Status LED’s
Green and Red
Audible tone
Tone on matching software key and wired external buzzer control
Colour
Charcoal & Ivory
IP rating
IP 67
RED
BLACK
YELLOW
ORANGE
GREEN
WHITE
BROWN/W*
BROWN/W*
+12Vdc
GND
BUZ
LED
W0
W1
TAMPER1
TAMPER2
Check your circuit diagram for the colour coding of the circuit wiring. The reader can be damaged beyond repair if
the wiring is connected incorrectly. Read the instructions on the next page first.
*NOTE: Tamper cable connection is optional.
-9-
-2-
!
If the reader has the same power supply as the door latch relay, make sure that the relay
is protected by a fast Schottky diode (Part number: Philips BYV10-20). If the relay is not
protected reader operation will be affected.
EXTERNAL USE
Mount the reader on a suitable external single gang surface mount box.
Make sure that the wire bundle to the miP5 has an IP rating of at least IP67.
1.
Connect the 0V Reference and 0V (if provided in the power supply) to Ground (GND).
2.
Connect the Wiegand signal cables.
3.
Connect the Buzzer and the LED cables.
4.
Attach the 12Vdc wire last.
Use warming pads if the temperature of the reader is expected to fall below -10ºC (14ºF).
HANDLING
Handle the miP5 with care. Do not damage/drop unit before installation.
OPTIONAL: Connect the Tamper cables.
The reader unit will not be waterproof if the casing is damaged. Replace the reader if the casing is damaged.
5.
Place the reader on the wall (Make sure the wires are not crushed)
6.
Insert and hand tighten the screws.
MAINTENANCE
Once installed the miP5 requires no maintenance.
TROUBLESHOOTING
If the reader doesn't respond when a valid smart card is presented, check the following.
7.
NOTE:
Symptom
Possible cause
Check
LED is not lit
No power to the reader
Check the power supply to the
reader.
LED is Orange or Buzzer sounds low
Voltage to the reader is below 10V
Check the power supply to the
reader
Check that the reader is level before tightening the screws.
Reader doesn’t respond
Invalid card or card is faulty
Check reader with another valid
smartcard
Excessive tightening of screws may deform the casing, resulting in a damaged unit.
THIS WILL VOID THE WARRANTY.
Reader beeps but lock doesn’t open
Wiring to the controller faulty.
Check the wiring to the controller
8.
Replace the cover.
9.
Power up the reader.
NOTE:
NOTE: If reader beeps when a valid smart card is presented then the
reader is functioning.
If the problem still exists then uninstall the reader and send it back to BQT Solutions (address details on the back
of this manual). If the reader is within the warranty period then another will be sent free of charge.
The unit needs approximately 13 seconds to set up before it can respond to a valid smart card.
-3-
-8-
THIS PAGE LEFT BLANK
INTENTIONALLY
DRILLING TEMPLATE
FOR miP5
Carefully remove this middle section of the
manual to use as a drilling guide.
-7-
-4-
DRILLING TEMPLATE
FOR miP5
20mm (0.79”) hole for wire entry
2mm x 4 mm (0.08” x 0.16”)
holes for mounting screws
Minimum outer dimension is
90 mm x 90 mm (3.54” x 3.54”)
so as not to interfere with any
other components
-5-
-6-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2005:05:26 07:41:30Z
Modify Date                     : 2005:06:06 11:14:29+10:00
Page Count                      : 7
Creation Date                   : 2005:05:26 07:41:30Z
Mod Date                        : 2005:06:06 11:14:29+10:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Les Dickenson
Metadata Date                   : 2005:06:06 11:14:29+10:00
Creator                         : Les Dickenson
Title                           : Microsoft Word - APPENDIX K _INS_Man_.doc

EXIF Metadata provided by EXIF.tools