BRAND ADDITION BTS-06 wireless shower speaker User Manual 170518 axe speaker manual USA

BRAND ADDITION LTD wireless shower speaker 170518 axe speaker manual USA

User Manual

SymptomsCannot switch the speaker onBattery empty Charge the batteryUnable to pairthe speakerSpeaker isalready switchedon and it is not inpairing modeRefer to the section of “Pairing BTS-06 to mobile phone or other deviceCauses SolutionsTroubleshootingTips:- Please make sure the speaker is in power off mode when trying to activate the pairing mode.- Turn on your mobile phone and activate the bluetooth function. - Search for Bluetooth devices BTS-06 will show.- Pair your device with BTS-06. If password is needed, type in “0000”. After BTS-06 is paired with your device, connect it to your device.- Fully charge speaker before first useOnce this speaker is paired and connected to your mobile device, next time when you switch on this speaker, it will connect to your mobile devices automatically as long as the bluetooth in your mobile device is on.Technical SpecificationsBluetooth version          4.2Hardware    Ver 1.0Range     10 meters  (equal to 33 feet)Frequency range          2.402-2.48GHz Charging input power   DC 5V/1.0AMax. output power    2WRF max. output power  3.58dBMBattery    3.7v, 300mAh lithiumCharging time     Approx. 3 hoursWorking time     Approx. 4 hoursUnit weight     Approx. 129gIP grade    IPX4Bluetooth firmware    Ver 3.2Bluetooth software    Ver 4.0Supplied by Brand Addition Ltd., Broadway House, TraffordWharf Road, Manchester M17 1DD, United KingdomMade In ChinaModel number BTS-06 Batch number PPI019393FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.Safety instructionsRead this manual carefully before putting the appliance into operation and keep this manual for future reference.- Keep the device away from heat, direct sunlight and sharp edges.- Keep the device away from naked flames. - Do not insert any metal object into the device.Risk of short circuit.- To avoid a static charge, do not use the device in an extremely dry climate. - Do not repair the unit yourself but contact an authorised specialist (danger of explosion if the battery is incorrectly replaced). The authorised specialist should replace only with the same or equivalent battery type.- Do not immerse product in any liquid to avoid short circuits.- Avoid placing the speaker in direct contact with flowing water.- For best results apply suction cup to a smooth, flat surface.Notes & tips- You can press phone button twice quickly toredial the last phone call.Accessories includedUSB charging cableIntegrated battery This Wireless speaker is powered by integrated rechargable lithium battery.Charge the integrated battery as follows- Insert the charging cable into the DC 5Vsocket on the unit, connect the USB plug into aPC or AC/DC adaptor. The LED indicator turnsred when the battery is being charged.- When the battery is fully charged, the red LED indicator goes out.Pairing BTS-06 to mobile phoneor other deviceActivate the Wireless Speaker’s pairing modein power off mode, press and hold theon/off button for about 6 seconds until the blue LED is flashing. Now the speaker is ready for pairing.Button description     On/off, to switch on or off.     Short press for the previous song, long press for turning down the volume.     Short press for the next song, long press for turning up the volume.     Phone, to pick up or hang up a phone call.     Play /Pause the music.Product overviewFCC ID: 2ALSKBTS-06WirelessShower SpeakerIf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.50mm70mmLYNXwireless speaker, manual, USAMafalda Goncalvesauthor19.05.2017date1version1:1scalenonenotesfontskey trim linebleed linesafe linefold linecoloursfinishes nonefonts nonebynone

Navigation menu