BRAND ADDITION BTS-06 wireless shower speaker User Manual 170518 axe speaker manual USA
BRAND ADDITION LTD wireless shower speaker 170518 axe speaker manual USA
User Manual
Symptoms
Cannot switch
the speaker on
Battery empty Charge the battery
Unable to pair
the speaker
Speaker is
already switched
on and it is not in
pairing mode
Refer to the section of
“Pairing BTS-06
to mobile phone or other
device
Causes Solutions
Troubleshooting
Tips:
- Please make sure the speaker is in power off
mode when trying to activate the pairing mode.
- Turn on your mobile phone and activate the
bluetooth function.
- Search for Bluetooth devices BTS-06 will show.
- Pair your device with BTS-06. If password is
needed, type in “0000”. After BTS-06 is paired with
your device, connect it to your device.
- Fully charge speaker before first use
Once this speaker is paired and connected to your
mobile device, next time when you switch on this
speaker, it will connect to your mobile devices
automatically as long as the bluetooth in your
mobile device is on.
Technical Specifications
Bluetooth version 4.2
Hardware Ver 1.0
Range 10 meters (equal to 33 feet)
Frequency range 2.402-2.48GHz
Charging input power DC 5V/1.0A
Max. output power 2W
RF max. output power 3.58dBM
Battery 3.7v, 300mAh lithium
Charging time Approx. 3 hours
Working time Approx. 4 hours
Unit weight Approx. 129g
IP grade IPX4
Bluetooth firmware Ver 3.2
Bluetooth software Ver 4.0
Supplied by Brand Addition Ltd., Broadway House, Trafford
Wharf Road, Manchester M17 1DD, United Kingdom
Made In China
Model number BTS-06 Batch number PPI019393
FCC Compliance Statement
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
Safety instructions
Read this manual carefully before putting the
appliance into operation and keep this manual for
future reference.
- Keep the device away from heat, direct sunlight
and sharp edges.
- Keep the device away from naked flames.
- Do not insert any metal object into the device.
Risk of short circuit.
- To avoid a static charge, do not use the device in
an extremely dry climate.
- Do not repair the unit yourself but contact an
authorised specialist (danger of explosion if the
battery is incorrectly replaced). The authorised
specialist should replace only with the same or
equivalent battery type.
- Do not immerse product in any liquid to avoid
short circuits.
- Avoid placing the speaker in direct contact with
flowing water.
- For best results apply suction cup to a smooth,
flat surface.
Notes & tips
- You can press phone button twice quickly to
redial the last phone call.
Accessories included
USB charging cable
Integrated battery
This Wireless speaker is powered by integrated
rechargable lithium battery.
Charge the integrated battery as follows
- Insert the charging cable into the DC 5V
socket on the unit, connect the USB plug into a
PC or AC/DC adaptor. The LED indicator turns
red when the battery is being charged.
- When the battery is fully charged, the red LED
indicator goes out.
Pairing BTS-06 to mobile phone
or other device
Activate the Wireless Speaker’s pairing mode
in power off mode, press and hold the
on/off button for about 6 seconds until the blue
LED is flashing. Now the speaker is ready for
pairing.
Button description
On/off, to switch on or off.
Short press for the previous song, long press
for turning down the volume.
Short press for the next song, long press for
turning up the volume.
Phone, to pick up or hang up a phone call.
Play /Pause the music.
Product overview
FCC ID: 2ALSKBTS-06
Wireless
Shower Speaker
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
50mm
70mm
LYNX
wireless speaker, manual, USA
Mafalda Goncalvesauthor
19.05.2017
date
1
version
1:1
scale
none
notes
fonts
key trim line
bleed line
safe line
fold line
colours
finishes none
fonts none
by
none