BRAVEN LC B4 Bluetooth Speaker User Manual DDDD13 ENGv1
BRAVEN LC Bluetooth Speaker DDDD13 ENGv1
Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1957390 |
| Application ID | RazRAATOzZUNGdQIxPfnYQ== |
| Document Description | Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.06kB (813288 bits) |
| Date Submitted | 2013-05-03 00:00:00 |
| Date Available | 2013-05-03 00:00:00 |
| Creation Date | 2013-04-15 10:41:06 |
| Producing Software | Adobe PDF library 9.00 |
| Document Lastmod | 2013-04-15 15:29:26 |
| Document Title | DDDD13_ENGv1 |
| Document Creator | Adobe Illustrator CS4 |
BRAVEN 440 OWNER’S GUIDE GET TO KNOW YOUR BRAVEN POWER SWITCH PAIRING / ANSWER-END CALL / PAUSE-RESUME MUSIC VOLUME DOWN / SKIP BACK (press and hold) VOLUME UP / SKIP TRACK (press and hold) POWER / PAIRING STATUS LIGHT RESET BUTTON BATTERY CHECK BUTTON EXTERNAL USB CHARGING PORT BRAVEN CHARGING PORT BATTERY INDICATOR LIGHTS 20% - 40% - 60% - 80% - 100% 3.5 MM AUDIO-IN JACK Full manual and troubleshooting: braven.com/manuals ENG TURN ON & BLUETOOTH PAIRING 1. 2. 3. Press the Power button for 2-3 seconds to turn on your BRAVEN. Press the same button again for 2-3 seconds to turn your BRAVEN off. 4. Go to your phone or device’s Bluetooth® settings and select “BRAVEN 440” from the list. 5. If asked for a passcode enter “0000” Activate Bluetooth® on the phone or device you are pairing with (see your device’s instruction manual for information on activating its Bluetooth® settings). Your BRAVEN will remember the last 8 devices it has paired with. Press and hold the Play Button on your BRAVEN until you hear the BRAVEN pairing sound. NOTE: If your BRAVEN does not have an active Bluetooth® connection and is left on, it will shut itself off after 30 minutes. To restart your BRAVEN you will need to press and hold the power button for 2-3 seconds. CHARGING YOUR BRAVEN CHARGING EXTERNAL DEVICES • Before using your BRAVEN for the first time, charge the unit until all 5 Battery Capacity lights are solid (not flashing), indicating a full charge (typically 2 to 3 hours). Your BRAVEN is designed to charge USB devices that draw from 0.3A - 1A (most cell phones & mp3 players – tablets and other 2A devices cannot be charged by your 440) using the full-sized USB port located behind the cap. To use external charging: • To charge your BRAVEN, plug the included USB-to-Micro-USB cable into a wall power adapter (not included) or into a powered USB port on a computer. Plug the Micro-USB connector end of the cable into the BRAVEN charging port. 1. Turn your BRAVEN on. 2. Plug the USB power cable that came with your phone, mp3 player, or other mobile device into the USB port on your BRAVEN. 3. Plug the other end of the cable into your mobile device, and it will immediately begin charging. Full manual and troubleshooting: braven.com/manuals ENG WATER RESISTANT FEATURES SPEAKERPHONE • The 440 is IPX5 Water Resistant. BRAVEN 440 speakers are not intended to be submerged in water, but are resistant to rainfall and water splashing. • Press the Answer-End button on your BRAVEN to answer the call over the speaker. Press the Answer-End button again to end the call. • IMPORTANT - To ensure your BRAVEN 440 speaker is prepared for use in a wet environment, remove all cable connections and tightly close the rear water cap. If the water cap is not properly closed, the 440 will not be water resistant. WARNINGS, CAUTIONS & LEGAL INFORMATION To reduce the risk of fire or electric shock, do not expose the BRAVEN to rain or moisture while charging. The BRAVEN should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on or near it while being charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard. The power supply must be used indoors only. Make no modifications to the product or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and will void the warranty. Do not place any flame sources, such as lighted candles, on or near the BRAVEN. The BRAVEN contains small parts that may be a choking hazard and is not suitable for children under age 3. Do not continue charging the battery if it does not reach full charge within the specified charging time. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose of the battery. Do not attempt to charge the battery in temperatures outside the range of 32°-104°F (0°-40°C). If the battery begins to leak, do not allow the liquid to come in contact with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention immediately. Do not expose the product or battery to excessive heat, including direct sunlight or fire and storage or use inside cars in hot weather, where it can be exposed to temperatures in excess of 115°F (60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and a shortened life expectancy. Extended exposure to direct sunlight may damage the external appearance and material qualities. Do not step on, throw, or drop batteries or the power supply or device, or expose them to a strong shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If either becomes deformed, properly dispose of it. Do not short-circuit batteries. Do not attempt to service the BRAVEN yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufacturer’s warranty. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. Your Bluetooth device (mobile phone, music player, tablet, laptop, etc.) must support the A2DP Bluetooth profile in order to work wirelessly with your new BRAVEN speaker. The A2DP profile is supported by most recent mobile products with built-in Bluetooth capability. Please refer to your device’s user manual for details and instruction regarding the Bluetooth profiles it supports. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Full manual and troubleshooting: braven.com/manuals IC WARNINGS CAUTIONS This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inf érieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonn ée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à I’établissement d'une communication satisfaisante. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autoriée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre fonctionnement. ONLINE: www.braven.com MANUAL: www.braven.com/manuals SUPPORT: www.braven.com/support WARRANTY: www.braven.com/support/warranty EMAIL: support@braven.com PHONE: 1-877-9 BRAVEN (1-877-927-2836) TUTORIALS: www.braven.com/tutorials
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2013:04:15 15:29:26+08:00 Create Date : 2013:04:15 10:41:06+08:00 Metadata Date : 2013:04:15 15:29:26+08:00 Creator Tool : Adobe Illustrator CS4 Format : application/pdf Title : DDDD13_ENGv1 Document ID : uuid:f6d0c10b-fb01-4667-8c01-ffb512a66159 Instance ID : uuid:4702e9bd-b016-4c1f-ad4a-b25b6689b237 Producer : Adobe PDF library 9.00 Page Count : 9 Creator Version : 14 Container Version : 11 Creator : Adobe Illustrator(R) 14.0 For : (Eng), Bounding Box : 0 0 396 198 Image Height : 198 Image Width : 396 Image Size : 396x198 Megapixels : 0.078EXIF Metadata provided by EXIF.tools