BRK D702MC Digital Wireless Camera User Manual Operation Instructionsx

BRK Brands Inc Digital Wireless Camera Operation Instructionsx

user manual

Wireless: digital wireless cameraOperation Manual
Index 2Before Using Technique Parameter…………………………………………………………………… 3 Packing List…………………………………………………………………………… 3 Layout…………………………………………………………………………………… 3How it Works…………………………………………………………………………… 4Function Setup Scan Mode…………………………………………………………………………… 5 Menu View Mode…………………………………………………………………………… 5 Rec Store…………………………………………………………………………… 5 Rec Files……………………………………………………………………… 6 Store Format……………………………………………………………………… 6 Systems…………………………………………………………………………… 7 Motion Record……………………………………………………………………7 Clock Setting……………………………………………………………………7 Pairing Camera
Before UsingTechnique Parameter LayoutPacking List31.IR; 2.Power; 3.CH; 4.AN- 5.M;6.AN+ ;7.Earphone*;8.DC 5V; 9.Pairing Key;10.DC 5V; 11.SD card socket The package contents:One Wireless DVR&Moniter;Four Wireless Cameras;Five DC 5V Adapters;One Remote Control.
How it Works M M4Chooes Cam X and press M ，a few red arrowswill appear，then press Pairing Key onCamera for 2 seconds，if "success" isdisplay on screen，it means pairing is ok，when failed,"Failed"appears.1.Connect the adapter to Moniter/Camera,then connect the adapter to the ACsocket；2.Press Power Key on Moniter for more than 2 seconds to open it；3.The image will come out when Moniter is paired with Camera,the step isshown below
Function SetupM Rec StoreM5When View Mode icon is highlight，press M to enter。 Split 4 Scan Mode displays 4 picture in picture Auto Scan Mode display single channel,and each 5s later comes to another channel Manual Scan Mode single channel,press CH to change View ModeMenuAN+,AN-:up,down，CH:exit，M:enterScan Mode In this mode，user can view the realtime image。 Keys function are shown below ： CH：Camera switch AN-：volume lower AN+：volume higher M：Menu CH Means motion detection is on
Function SetupM Systems Motion RecordM M6 In Rec Store，rec files is store by time。 When playback，CH is for pause，AN+，AN- is playing the previous/the later file。 Store Format SD Card Overwrite is always on，when SD card is been full，the earliest file in one hour is deleted。 Chooes OK,SD card will be formatted. 5S means record 5S； 10S means record 10S； ON means motion detection is on； OFF means motion detection is off.
Function Setup7 Pairing Camera Find it in page 3 How it works. Clock Setting M for choosing，AN-，AN+ for modifying。 choose Clock Setting and press M
FCC ID: M7U-D702MC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC: 2693A-D702MC The device complies with industry Canada license-exempt RSS standard(s).Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." Company: BRK Brands Inc Product: digital wireless camera Model: D702MC country of origin: China changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu