BRK D702MC Digital Wireless Camera User Manual Operation Instructionsx
BRK Brands Inc Digital Wireless Camera Operation Instructionsx
BRK >
user manual
Wireless: digital wireless camera
Operation Manual
Index
2
Before Using
Technique Parameter…………………………………………………………………… 3
Packing List…………………………………………………………………………… 3
Layout…………………………………………………………………………………… 3
How it Works…………………………………………………………………………… 4
Function Setup
Scan Mode…………………………………………………………………………… 5
Menu
View Mode…………………………………………………………………………… 5
Rec Store…………………………………………………………………………… 5
Rec Files……………………………………………………………………… 6
Store Format……………………………………………………………………… 6
Systems…………………………………………………………………………… 7
Motion Record……………………………………………………………………7
Clock Setting……………………………………………………………………7
Pairing Camera
Before Using
Technique Parameter Layout
Packing List
3
1.IR; 2.Power; 3.CH; 4.AN- 5.M;
6.AN+ ;7.Earphone*;
8.DC 5V; 9.Pairing Key;
10.DC 5V; 11.SD card socket
The package contents:
One Wireless DVR&Moniter;
Four Wireless Cameras;
Five DC 5V Adapters;
One Remote Control.
How it Works
M M
4
Chooes Cam X and press M ，a few red arrows
will appear，then press Pairing Key on
Camera for 2 seconds，if "success" is
display on screen，it means pairing is ok，
when failed,"Failed"
appears.
1.Connect the adapter to Moniter/Camera,then connect the adapter to the AC
socket；
2.Press Power Key on Moniter for more than 2 seconds to open it；
3.The image will come out when Moniter is paired with Camera,the step is
shown below
Function Setup
M
Rec Store
M
5
When View Mode icon is highlight，press M to enter。
Split 4 Scan Mode displays 4 picture in picture
Auto Scan Mode display single channel,and each 5s later comes to
another channel
Manual Scan Mode single channel,press CH to change
View Mode
Menu
AN+,AN-:up,down，CH:exit，M:enter
Scan Mode
In this mode，user can view the realtime image。
Keys function are shown below ：
CH：Camera switch AN-：volume lower AN+：volume higher M：Menu
CH
Means motion detection is on
Function Setup
M
Systems
Motion Record
M
M
6
In Rec Store，rec files is store by time。
When playback，CH is for pause，AN+，AN- is playing the
previous/the later file。
Store Format
SD Card Overwrite is always on，when SD card is been full，the
earliest file in one hour is deleted。
Chooes OK,SD card will be formatted.
5S means record 5S；
10S means record 10S；
ON means motion detection
is on；
OFF means motion detection
is off.
Function Setup
7
Pairing Camera
Find it in page 3 How it works.
Clock Setting
M for choosing，AN-，AN+ for modifying。
choose Clock Setting
and press M
FCC ID: M7U-D702MC This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation.
IC: 2693A-D702MC The device complies with industry Canada license-exempt RSS
standard(s).Operation of this device is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement."
Company: BRK Brands Inc
Product: digital wireless camera
Model: D702MC
country of origin: China
changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.