BT Links BT-20 Bluetooth USB Dongle User Manual BT 20S UserMan 1

BT-Links Company Limited Bluetooth USB Dongle BT 20S UserMan 1

Contents

Users Manual 1 of 2

IVT BlueSoleil™ User Manual Version: 1.4 This document describes how to use IVT BlueSoleil噡.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.2Contents 1 BlueSoleil™ Introduction............................................................................ 11.1 Profiles ....................................................................................................11.2 New features in BlueSoleil 1.4 .....................................................................21.3 Features in BlueSoleil 1.2 ...........................................................................22 BlueSoleil™ Basic Operations ..................................................................... 42.1 Start BlueSoleil™ ......................................................................................42.2 Exit BlueSoleil™ ........................................................................................42.3 BlueSoleil™ Main Window ...........................................................................52.4 Service Window.........................................................................................82.5 What You Need To Do Before Build A Connection ......................................... 102.6 Start Or Stop A Bluetooth Service Connection.............................................. 143 Bluetooth Security.................................................................................... 163.1 Introduction ........................................................................................... 163.2 BlueSoleil Security Configuration ............................................................... 174 Personal Area Networking........................................................................ 224.1 Introduction ........................................................................................... 224.2 Communication Between Two Computers.................................................... 234.3 Access LAN Through PAN-NAP ................................................................... 294.4 Access LAN Through IVT BlueSoleil™.......................................................... 334.5 Access Internet through IVT BlueSoleil™..................................................... 354.6 PAN Configuration ................................................................................... 365 Dial-Up Networking.................................................................................. 385.1 Introduction ........................................................................................... 385.2 Connect to a Dial-up Gateway from a Computer........................................... 385.3 Settings for Dial-up Networking Profile (client side) in Windows98/Me............. 416 Bluetooth Serial Port ................................................................................ 466.1 Introduction ........................................................................................... 466.2 Connect Two Computers........................................................................... 466.3 Use SPP to Print a Document..................................................................... 486.4 Use a cellphone to control a computer ........................................................ 486.5 SPP Configuration.................................................................................... 507 Bluetooth File Transfer............................................................................. 527.1 Introduction ........................................................................................... 527.2 Transfer files to/from a Computer .............................................................. 527.3 FTP Configuration .................................................................................... 558 LAN Access............................................................................................... 568.1 Introduction ........................................................................................... 568.2 Access a Local Area Network (LAN) ............................................................ 568.3 Access a LAN via a LAN Access Point .......................................................... 608.4 Settings for LAN Access Profile (client side) in Windows98/Me........................ 618.5 Usage of LAN Access Profile (server side) in Windows98/Me........................... 659 Object Push.............................................................................................. 709.1 Introduction ........................................................................................... 709.2 Transfer Objects from a Computer to a Bluetooth Cellular Phone .................... 70
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.39.3 Transfer Objects from a Bluetooth Cellular Phone to a Computer .................... 749.4 Transfer Objects between Two Computers................................................... 759.5 Configure OPP Service.............................................................................. 769.6 Using OPP in Microsoft Outlook .................................................................. 7710 Synchronization..................................................................................... 8010.1 Introduction......................................................................................... 8010.2 Exchange PIM Data with a Cellular Phone ................................................. 8010.3 Set up SYNC Connection between Two Computers ..................................... 8110.4 Synchronization Configuration ................................................................ 8310.5 Using Synchronization in Outlook ............................................................ 8411 Hardcopy Cable Replacement ................................................................ 8711.1 Introduction......................................................................................... 8711.2 Print a Document Using a Bluetooth Printer .............................................. 8712 Human Interface Device ........................................................................ 8912.1 Introduction......................................................................................... 8912.2 Connect a Computer to a Bluetooth Mouse ............................................... 8912.3 Connect a Computer to a Bluetooth Keyboard ........................................... 9113 FAX........................................................................................................ 9413.1 Introduction......................................................................................... 9413.2 Connect to a FAX Gateway from a Computer ............................................ 9413.3 Using FAX software on a bluetooth computer ............................................ 9414 Headset ................................................................................................. 9614.1 Introduction......................................................................................... 9614.2 Create an audio connection between computer and Headset ....................... 9614.3 Using Headset Profile in BlueSoleil........................................................... 9815 Advanced Audio Distribution ............................................................... 10015.1 Introduction....................................................................................... 10015.2 Play music between computer and AV Headphone wirelessly ..................... 10015.3 Play music between two computers wirelessly......................................... 10316 Basic Imaging ..................................................................................... 10716.1 Introduction....................................................................................... 10716.2 Push an image from a digital still camera. .............................................. 10716.3 Control a digital still camera remotely.................................................... 10817 Connection Shortcut ............................................................................ 11017.1 Introduction....................................................................................... 11017.2 How to use Connection Shortcut ........................................................... 11018 Bluetooth Glossary .............................................................................. 113
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.11 BlueSoleil噡 Introduction BlueSoleil噡 is a Windows-based Bluetooth Wireless software suite from IVT Corporation. It is fully compliant to the latest Bluetooth SIG specifications. BlueSoleil噡 incorporates Bluetooth and computer technologies to enable users to wirelessly access computing devices, form networks, and exchange information. 1.1 Profiles BlueSoleil噡 V1.4 includes ten Bluetooth profiles. The following table indicates which of these profiles is available for client and server devices. Profile Description Client Server PAN Personal Area Networking ¥¥SPP Serial Port ¥¥DUN Dial-Up Networking ¥LAP LAN Access ¥¥FTP File Transfer ¥¥HID Human Interface Device ¥HCRP Hardcopy Cable Replacement ¥OPP Object Push ¥¥SYNC Synchronization ¥¥AG Audio Gateway ¥¥AV Audio Source Audio Sink ¥¥BIP Basic Imaging ¥¥BlueSoleil噡 supports more than ten Bluetooth chip-sets and HCI interfaces including USB, UART, PCMCIA and Compact Flash. IVT BlueSoleil噡 supports: i Windows 2000/XP i Windows 98SE/Me This manual describes how to use BlueSoleil噡:i How to start and exit BlueSoleil噡.i How to navigate the Main Window and Service Window. i How to use the Bluetooth profiles.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.21.2 New features in BlueSoleil 1.4 BlueSoleil version 1.4 is ready now with even more exciting new features, multimedia profiles are added into BlueSoleil. They include: i HeadsetWith this feature, users can use Bluetooth Headset to listen to music, to record sound or to chat with others. Headset increases the user’s mobility. i Audio/VideoWith this feature, users can listen to stereo music with any media player wirelessly between Bluetooth enabled computers or Bluetooth enabled computer and Bluetooth Stereo headphone. i Basic Image With this feature, users can push an image from a digital still camera to a computer, or control a digital still camera remotely from a computer. 1.3 Features in BlueSoleil 1.2 BlueSoleil version 1.2.0 is ready with exciting new features, aiming at making Bluetooth more easy to use for end user. Less steps is required to setup wireless connections. User can even do not care what is Bluetooth. Anyway, Bluetooth is just a kind of connecting method. So, please just have fun from all these new functions. They include: i Seamless Integration with WindowsThis is an important improvement to make it more easy to use Bluetooth. Generally, users do not care about what is Bluetooth and how can they connect to a Bluetooth device. From users' point of view, they just want to print a document, open a serial port, dial-up to Internet and send a FAX etc. To make this, BlueSoleil automatically setup Bluetooth connections for users. There is no need to setup connection before using Bluetooth anymore. i Integration with MS Outlook for Object Push and Synchronization With this feature, contact cards and email messages can be sent or synchronized from Outlook directly via Bluetooth. Received cards and other information items will be imported to Outlook automatically. i Shortcut on Windows DesktopWindows shortcut is introduced here to let user to be able to setup Bluetooth connection when they want by just double- clicking them. It makes Bluetooth connection extremely simple. i Security 2With this feature, users can manage local Bluetooth services in a flexible way. Authentication, encryption and authorization can be configured based on every service. Users can set which remote device can access local services and which not.i FAXFAX enable users to send a FAX from PC side via Bluetooth cellular phone or Bluetooth FAX machine wirelessly. i Network Address Translation, Network Access Point, and DHCP server in PAN
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.3With these functions, users can setup ad-hoc Personal Area Network quickly and share the Internet accessing among computer. i More Bluetooth Serial PortsMore Bluetooth Serial Ports are supported, with 4 Bluetooth Serial Ports for out-going connections and 2 Bluetooth Serial Ports for incoming connections. i Mobile HIDWith this feature, users can make cellular phones like Ericsson T39 or T68 to work like a mouse and keyboard. Users can remotely control their PC to show Power Point etc.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.42 BlueSoleil™ Basic Operations 2.1 Start BlueSoleil™ After installing BlueSoleil™, there are two ways to start the program: 1. A BlueSoleil™ shortcut icon on the Windows desktop. 2. An IVT BlueSoleil噡program group entry in the Windows’ Start | Programs menu. Double-click the BlueSoleil噡shortcut icon on the desktop or click the BlueSoleil™menu item on the Start | Programs | IVT BlueSoleil噡menu to start the BlueSoleil™ software. The BlueSoleil™ icon will be displayed at the bottom right corner of the Windows desktop (Figure 2.1). Figure 2.1: BlueSoleil™ icon The BlueSoleil噡 Main Window pops up as shown in Figure 2.2. 2.2 Exit BlueSoleil噡To exit BlueSoleil噡, right-click the BlueSoleil™ icon at the bottom right corner of the Windows task bar and select Exit on the pop-up menu. Note: Selecting the Close button at the top right corner of the BlueSoleil™ window only hides the BlueSoleil™ window.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.52.3 BlueSoleil™ Main Window The BlueSoleil™ Main Window displays all surrounding Bluetooth devices. From the BlueSoleil™ Main Window users can search for surrounding Bluetooth devices and can execute connect/ disconnect functions. Figure 2.2: BlueSoleil™ Main Window The main elements in the BlueSoleil™ Main Window are: i My Device Icon i Remote Bluetooth Device Icons i Bluetooth Service Icons 2.3.1 My Device Icon This icon represents the client computer. It is called the ‘My Device icon’ or ‘center ball’ in this document. Functions:i Hover the mouse over the My Device icon to display the client Bluetooth device name and address. i Double-click to start/ stop searching for surrounding Bluetooth devices. i Drag scrollbar on the right of main window to find other Bluetooth devices if there are more than seven devices. i Right-click to display the pop-up menu with related operations.Remote DeviceLocal Device IconRemote Device Serivce Icon
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.62.3.2 Remote Bluetooth Device Icons The icons in the table below represent the remote Bluetooth devices. Device Type Icon HeadsetKeyboardLAN Access Point LaptopMobile ModemMousePersonal Computer PDAPrinter ScannerUnknown device The following colors are used to indicate the status of the remote Bluetooth device: i White (Idle) This is the normal status of the device.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.7i Yellow (Selected) The device has been selected by the user. i Green (Connected) The device has been connected. Functions:i Single-click to select. i Double-click to get the services remote Bluetooth device supports. i Right-click to display the pop-up menu with related operations. 2.3.3 Bluetooth Service Icons The Bluetooth Service Icons represent the Bluetooth services supported by the remote device. Bluetooth Service Icon Personal Area Networking Dial-up Networking Serial Port LAN Access File Transfer Information Synchronization Object Push Printer FaxHuman Interface Device
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.8AV Headphone Basic Image Headset Audio Gateway The following colors are used to indicate the status of the Bluetooth service: i White (Idle) This is the normal status. i Pink (Available) The Bluetooth service is available for the selected device. i Yellow (Selected) The service icon has been selected by the user. i Green (Connected) The service is connected. Functions:i Hover the mouse over the icon to display the service name. i Single-click to select the service. i Double-click to connect. i Click to display the pop-up menu with related operations. Figure 2.3: Bluetooth PAN Service Icon 2.4 Service Window Select menu View | Service Window and the Service Window appears. This window displays the Bluetooth services the ‘my Bluetooth device’ provides to remote Bluetooth devices. These services are called ‘my Bluetooth services’.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.9Figure 2.4: BlueSoleil™ Service Window Main Elements: i My Service Icons 2.4.1 My Service Icons These icons represent ‘my Bluetooth services’. My Bluetooth Service Icon Personal Area Networking Serial Port LAN Access Object Push
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.10File Transfer Information Synchronization AV Headphone Basic Image Headset AG The following colors indicate the status of the Bluetooth service: i White (Idle) Normal status. i Pink (Started) My Bluetooth service is started. i Green (Connected) A remote device has connected to my Bluetooth service. 2.4.2 Start/Stop a Bluetooth Service Select a service icon in service window, and double-click to start/stop a service or select right popup menu to send command. 2.4.3 View the Property of a Service Right-click to display the pop-up menu with related operations in service window. 2.5 What You Need To Do Before Build A Connection 3. Inquiring Bluetooth Devices in the vicinity 4. Pairing your desktop or laptop with the associated device2.5.1 Inquiring Bluetooth DevicesMethod 1: Enquire Device To start to set up a Bluetooth connection, you have to find the remote device you want to connect first. You can choose one of the following methods to find the remote device. You may double click My Bluetooth Device icon or from MY Bluetooth Menu -> Bluetooth Device Inquiry (Figure 2.5) to find other Bluetooth devices in range. Bluetooth devices within the radio range will be added to the orbit. The inquiry procedure will search up to 7 devices each time. After it finds the devices or it has been 25 seconds since the beginning of the inquiry, it will continue to refresh
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.11the names of the found devices. Double clicking the local device or double clicking one of the remote devices (to start to search profiles it supports) will stop the inquiry procedure.Figure 2.5 Inquiry MenuMethod 2: Add Device from History List If there are more than 7 devices to find within the radio range, you can add the device you have used to the orbit from the history device list. Click Tools Menu and select Add Device from History. The History dialog box will be pop-up (Figure 2.6). Figure 2.6 History DialogSelect the device from the list and click Add, the selected device will be added to the end of the orbit. The shortcut key to open the History dialog box is Ctrl+H. Method 3: Add a New Device by Inputting Device Address If you are going to connect a device that you have never used, which is not in the history list and which you cannot find, you can add it directly by inputting its Bluetooth device address. Click Tools Menu and select Add New Device. TheAdd Bluetooth Neighbor Device Manually dialog box pops up.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.12Figure 2.7 Add Bluetooth Neighbour Device Manually dialog Input the device address and click OK, and then the device will be added to the end of the orbit. However, the device type will be unknown. The shortcut key to open Add Bluetooth Neighbor Device Manually dialog box is Ctrl+N. The remote devices found will be added to the orbit. Refer to the following window (Figure 2.8). Figure 2.8 Devices can be add into the main window2.5.2 Pairing your desktop or laptop with a Bluetooth Device Bluetooth passkey may be asked if security level of either side of the connection is set to High and they are not paired devices. You can initiate the pairing from your own desktop or laptop or accept a request for pairing from the other device. Pairing allows you to avoid entering access information each time a connection is setup. Paired devices share a unique Link Key, which they exchange each time they connect.Pairing Procedures
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.13Double click the remote Bluetooth device you want to connect and you will be asked to enter the Bluetooth Passkey. Please type the Bluetooth Passkey in the Passkey field (Figure 2.9). Figure 2.9 Input PasskeyMeanwhile, there will be a Bluetooth Passkey dialog box prompted on the remote laptop or desktop equipped with the Bluetooth device to ask you to enter passkey. The Bluetooth passkey should be the same between paired devices. If the pairing process succeeds, there will be a red check on the paired Bluetooth device icon (Figure 2.10). Figure 2.10 Device have been paired
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.142.6 Start Or Stop A Bluetooth Service Connection After you have finished the pairing process, it means that you have built the connection between the client side and remote side. You may start to use the Bluetooth services the associated Bluetooth device provides. You can refer to 4.2 Communication Between Two Computers as a more detailed example.2.6.1 Search Bluetooth Service You can double click the associated Bluetooth device icon or right-click on the icon and select Refresh Services to find the service it provides. After service searching finishes, the services the remote device supports and the corresponding service icons on the top of the main window will change to be pink color. 2.6.2 Start A Remote Bluetooth Service Connection You may right-click on the connected Bluetooth device, select Connect and highlight the service you want to use (Figure 2.11). Or Double click the pink profile icon (the service icon) you want to connect on the top of the Main Window. Figure 2.11 Connect to the remote service Connection will be setup. After connection is OK, the remote device and the service icon will turn green.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.15Figure 2.12 The connection has been established2.6.3 Stop A Bluetooth Service Connection There are two ways to stop the service:i Select a started service and right click the service. On the popup menu, select Stop Service. The service icon turns white. The service is stopped. i Select a started service. Select My Services menu and highlight Stop Service.The service icon turns white. The service is stopped.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.163 Bluetooth Security 3.1 Introduction Bluetooth introduces security features to protect users from unauthorized access of local data and encrypt data in the air. Three levels of security is defined in Bluetooth: i Low (no security): Local device will not initiate any security procedure. i Medium (service-level enforced security): Local device does not initiate security procedures before user access local Bluetooth services. This mode allows different and flexible access policies for Bluetooth applications, especially running applications with different security requirements in parallel. i High(device level enforced security): Local device initiates security procedures as long as the remote Bluetooth device set-up link, for example, browsing local services etc. Following table shows the security when Bluetooth client device access another Bluetooth device that provides services. Server in Security Low Server in Security Medium Server in Security High Client in Security LowNo security. Can browse services.Accessing service depends on the settings of local services.High. Security is enforced at link level before setup connection. Client in SecurityMediumNo security. Can browse services.Accessing service depends on the settings of local services.High. Security is enforced at link level before setup connection. Client in Security HighHigh. Security is enforced at link level before setup connection. High. Security is enforced at link level before setup connection. High. Security is enforced at link level before setup connection. When security is enforced at device level or a local service requires, an Authentication procedure is required. Both of Bluetooth client and server side need enter a Bluetooth passkey to confirm the client user's identity. To avoid entering Bluetooth passkey every time, two Bluetooth devices can be set up paring relationship, that is to save the relationship after Authentication. AfterAuthentication, the Bluetooth link can be encrypted if necessary.Authorization is used in Security Medium (service-level enforced security), to set which devices can use the local service and which cannot. The following are some concept of bluetooth security:
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.17i AuthenticationAuthentication is used to verify identity; it requires a passkey or link key from the remote device. When an Authentication procedure is initiated by either local device or remote device, a dialog is shown to ask for entering Bluetooth Passkey. Only when passkeys from both sides are identical, can authentication succeed. i AuthorizationBluetooth authorization is the procedure to decide whether you are going to allow some other Bluetooth devices to use Bluetooth services on your Bluetooth devices. This procedure takes function in Bluetooth security Medium and applies to Bluetooth services only. i EncryptionWhen a Bluetooth link is encrypted, data are encrypted into unreadable data using a secret key or password before they are sent in the air. Data are decrypted after they reach the remote device using the same key or password that was used to encrypt it. i Pairing Devices Pairing allows you to avoid entering access information each time a connection is setup. Paired devices share a unique Link Key, which they exchange each time they connect. 3.2 BlueSoleil Security Configuration The BlueSoleil security configuration involves the policy setting of the local device's security, it comprises the following items: i General Property Page i Devices Property Page i Services Property Page
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.183.2.1 General Property Page Figure 3.1: Security Configuration Dialog Security Level i LowWhen Low is checked, normally other devices may access your device freely, which means that they don't need to input the Bluetooth passkey. However, if the other device set its own security level to High, you are also required to input the passkey. i Medium The medium level is service level security. You can assign access right for specified service to different devices. For more detail, to see Services Property Page.i HighWhen other devices connect to your device or your device connects with other devices, you are required to input a Bluetooth passkey. If your device has been paired with the other device before connecting, you can connect with the other device directly. (A link key has been created and stored for the paired relationship. Link key is used instead of Bluetooth passkey here.) Bluetooth Passkey i Set Default Passkey If you check Set Default Passkey, you needn't input passkey manually. BlueSoleil will use the passkey inputted in the edit box below to connect with other devices. Data Encrypt
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.19i Enable Data Encryption If the item is checked, the transmitted data will be encrypted into an unreadable format. 3.2.2 Devices Property Page Figure 3.2: Devices Property Page when you establish connection with a paired device, you needn't input a passkey again. A link key has been created and stored for the paired relationship. How to pair with another device i Automatically If a passkey is required before connection, devices will pair automatically the first time they connect (a passkey must be successfully exchanged). i Manually In the main window of BlueSoleil, right click a device, select Pair Device from the popup menu, and then input a same passkey on both side. How to unpair with another device Manually 1. Click Remove Pairing button in this page. 2. In the main window of BlueSoleil, right click a paired device, select Unpair from the popup menu. Authorization for paired devicesOnly when the Security Level is set as Medium in General Property Page, the Authorization button is enabled. Select a device in Paired Devices list, then click Authorization button to show an authorization dialog.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.20Figure 3.3: Authorization Dialog The services shown in Service Name list are those need Authentication. Configure in Services Property Page. If a service name is checked, the device will be a trusted device for the service. 3.2.3 Services Property Page Only when the Security Level is set as Medium in General Property Page, the property page is enabled.Figure 3.4: Services Property Page Authentication
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.21i Checked If you check the Authentication box after a service name, when a not paired device access the service, a passkey is required. i Not Checked The security level of the service will be Low. Any device may access the service freely. EncryptionIf check Encryption after a service name, the transmitted data for the service will be encrypted into an unreadable format. Authorization for servicesSelect a service which need Authentication, then the Authorization button is enabled. Click Authorization button to show an authorization dialog for the specified service. Figure 3.5: Authorization for Services Trusted DevicesThe devices are trusted by the specified service. Click Add button to add devices into Trusted Devices list. Only a paired and trusted device can use the service freely. i Trust all devicesSet all devices trusted. i Prompt to user if the device is not a trusted device of this serviceIf a device attempting to access the service is not a trusted device, a prompt dialog will popup on the server side to inquire user if accepting the connection. i Reject the device to use the service if it is not a trusted device of this serviceIf a device attempting to access the service is not a trusted device, the device will be rejected to established connection directly.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.224 Personal Area Networking 4.1 Introduction The Bluetooth Personal Area Networking (PAN) is a Bluetooth application, which enables devices to form an ad-hoc network or to access a remote network through a network access point. The PAN application can be used in the following scenarios: i Two or more computers (or PDAs) can be connected to form a Group Ad-hoc Network (GN) and can visit each other using Windows Network Places or any application based on TCP/IP. (Figure 4.1) Figure 4.1: Group Ad-hoc Network i Two or more computers (or PDAs) can access a Local Area Network through a Network Access Point (NAP) bridge. (Figure 4.2) After the computers or PDAs connect to the PAN-NAP, they become members of the LAN and can communicate with other computers in the LAN directly. Figure 4.2: Access LAN through PAN-NAP i Two or more computers (or PDAs) can access a Local Area Network through BlueSoleil™. ˄Figure 4.3˅ After the PANUs connect to the BlueSoleil NAP, they become members of the LAN and can communicate with other computers in the LAN directly.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.23Figure 4.3: Access LAN through BlueSoleil NAP i Two or more computers (or PDAs) can access the Internet through BlueSoleil™. (Figure 4.4) In this scenario, there are two network adapters for the BlueSoleil NAP: the WAN adapter is connected to the Internet and the BT network adapter is used for Bluetooth connections from the PANUs. The BlueSoleil NAP acts as a TCP/IP gateway, and the PANUs can access the Internet through the BlueSoleil NAP. Figure 4.4: Access Internet through BlueSoleil NAP Each of these scenarios is now covered in more detail. 4.2 Communication Between Two Computers This section outlines the steps involved in connecting two computers, Computer A and Computer B. Computer A: Computer B: Desktop Notebook/ Laptop A Bluetooth Device A Bluetooth Device IVT BlueSoleil™ IVT BlueSoleil™
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.24Step 1: Insert Bluetooth Devices in both computers and start BlueSoleil™ in both computers. Step 2: Set device name of each computer to anything you want. Here they are named Computer A and Computer B. i In the BlueSoleil™ Main Window of Computer A, click MyBluetooth | Property…. Enter ‘Computer A’ in the device name field in the My Bluetooth Device window. i Repeat for Computer B. Step 3: Set the Security Level. i Click My Bluetooth| Security, the Security Configuration panel pops up. i On the Security Configuration panel, select High in Security Level. i Note: If you check the Fixed Passkey and input a Bluetooth passkey, this passkey will be used as the default passkey. The other computer will then have to provide the same passkey during the connection procedure if it wants to connect to this computer. Figure 4.5: Security Configuration Step 4: Start the PAN service on Computer A. i In the BlueSoleil噡 Main Window, click View | Service Window.i In the Service Window, right-click the Personal Area Networking icon. Choose Properties to configure my PAN service as Set upBluetooth Personal Area Network. (Figure 4.6) If the item of Enable DHCP Server is checked, a DHCP server will be started
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.25on the GN side. (Notes: To use DHCP, the BT Network Adapter on the client side must be set to obtain an IP address automatically. The IP address is in the form of 192.168.18.xxx.) i Click Apply or OK button to save the configuration. i Right-click the Personal Area Networking icon again, then choose Start Service. (Figure 4.7) Figure 4.6: Set up Bluetooth Personal Area Network Configuration
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.26Figure 4.7: Start PAN Service on Computer A Step 5: Search for Computer A on Computer B. i Double-click the My Device Icon (center ball). The surrounding discovered Bluetooth devices appear. i Check to see if Computer A appears. If it does not appear, double-click the My Device Icon again. Repeat the operation until you find Computer A. Step 6: Find the PAN service on Computer A. i Double-click the Computer A device icon on Computer B. i Enter the Bluetooth passkey (if security is set to High on either side) to start the authenticating process. The Enter Bluetooth Passkey window pops up on Computer A. Input any characters or numbers, e.g. “12”. The Enter Bluetooth Passkey window pops up on Computer B. Input exactly the same characters or numbers as you input for Computer A, e.g. “12”. (Figure 4.8) i Once authentication is complete, the PAN service is found. Figure 4.8: Input passkey
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.27Figure 4.9: PAN service is found Step 7: Connect to Computer A. i Right-click the PAN service icon; select Connect on the pop-up menu. (Figure 4.10) i The connection is established successfully ( Figure 4.11). Wait until the valid IP address is shown on the bottom right status bar on both Computer A and Computer B. If you enable the DHCP server on the server side, the IP address appears as “192.168.18.xxx”. If not, the IP address appears as “169.254.xxx.xxx”.Figure 4.10: Connect to PAN Service
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.28 Figure 4.11: Connection is established successfully. Step 8: Computer A and Computer B are now connected. On Computer B, go to Windows | My Network Places to find Computer A and copy files. Figure 4.12 shows where to input Computer A’s name. In Figure 4.12, Computer A is named ‘mike’. Figure 4.12: Find Computer A in My Network Places Step 9: To disconnect the PAN connection, disconnect from either Computer A or from Computer B. i On Computer B, right-click on the PAN service icon and choose Disconnect. (Figure 4.13)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.29i On Computer A, right-click on the PAN service icon in service window and choose Stop Service.Figure 4.13: Disconnect the PAN service from Computer B Advanced Usage: i Computer A is now the center node. Other computers, for example, Computers C, D and E, can connect to Computer A with BlueSoleil™ following the same steps as those for Computer B. Computer A supports up to 7 connections at the same time. i Computer A, B, C, D and E can access each other using the Windows NetworkPlaces. This forms a Bluetooth ad-hoc networking environment. Note: It takes about 1 minute before an IP address can be obtained on the client side (Computer B) unless you select to enable the DHCP server on the server side (Computer A). 4.3 Access LAN Through PAN-NAP This section outlines the steps involved in accessing a Local Area Network (LAN) through a PAN-NAP. Computer A: Ethernet PAN-NAP B: Notebook/Laptop Ethernet PAN-NAP A Bluetooth Device Windows 2000 IVT BlueSoleil™ Step 1: Plug the LAN cable into the PAN-NAP (Ethernet PAN-NAP B) and power it on
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.30it on. Step 2: Insert a Bluetooth Device into the computer. Step 3: Start BlueSoleil™ in the computer. Step 4: Connect Computer A to Ethernet PAN-NAP B 1. Go to Computer A, double click My Device Icon until you find the device Ethernet PAN-NAP B. 2. Find the PAN service on Ethernet PAN-NAP B by double clicking the Ethernet PAN Bridge B device icon. Enter the Bluetooth passkey (if security is set to High on either side) to start authentication. The Enter Bluetooth Passkey window pops up on Computer A. Input the same passkey as the one on the Ethernet PAN-NAP B. (Figure 4.8)3. Right-click the PAN service icon, and then choose Connect.(Figure 4.15) i Note: The passkey is provided by the PAN-NAP provider and the default value is usually "root". It can be modified by the software associated with the PAN-NAP. For more details please refer to the user documentation provided by the PAN-NAP provider. Figure 4.15: Choose Connect i The connection is established successfully (Figure 4.16). Wait until the valid IP address appears in the bottom right status bar on Computer A.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.31Figure 4.16: Successful connection to PAN-NAP Step 5: IP address configuration of the BT Network Adapter on Computer A. i Right-click on My Network Places and select Properties.(Figure 4.17) i Right-click the Local Access Connection 2 on the Network and Dial-up Connections window, and select Properties. (Figure 4.18)Figure 4.17: Right-click on My Network Places
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.32Figure 4.18: Network and Dial-up Connections i On the Local Area Connection 2 Properties window, select the Internet Protocol (TCP/IP) item and click on Properties. (Figure 4.9)i Set the IP address to be in the same subnet as the other computers in the LAN. (Figure 4.20). Figure 4.19: Find Internet Protocol (TCP/IP)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.33Figure 4.20: Set the IP address Note: When Computer A connects to Ethernet PAN-NAP B it accesses the LAN as if it is attached to the LAN directly. The network properties of Computer A must be the same as the computers in the LAN, that is, Computer A and the computers in the LAN must be in the same subnet and have the same subnet mask. For example, if the computers in the LAN use DHCP for IP addressing, then Computer A needs to be configured to use DHCP. If the IP address is configured manually on the computers in the LAN, then Computer A also needs to be configured manually. 4.4 Access LAN Through IVT BlueSoleil™ This section outlines the steps involved in accessing a Local Area Network (LAN) through IVT BlueSoleil™. Computer A: Computer B: Desktop Notebook/Laptop A Bluetooth Device A Bluetooth Device IVT BlueSoleil™ IVT BlueSoleil™ Network Adapter connecting to the LAN
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.34Step 1: i Start IVT BlueSoleil™ on both Computer A and Computer B. Please i refer to “Section 3.2:Communication Between Two Computers”, and complete Steps 1 to 4. Step 2: Start the PAN service on Computer A. i In the BlueSoleil噡 Main Window, click View | Service Window.i In the Service Window, right-click the Personal Area Networking icon. Choose Properties to configure my PAN service as AccessLAN Network and select a physical adapter, through which Computer A connects to a LAN, as the LAN Adapter (Figure 4.21).i Click Apply or OK button to save the configuration. i Right-click the Personal Area Networking icon again, and choose Start Service.Step 3: On Computer B, make sure that the BT adapter has the same configuration with computers in the LAN. (Refer to Step 6 in “Section 3.3: Access LAN Through PAN”.) Step 4: Setup connection between Computer A and Computer B. Please refer to “Section 3.2:Communication Between Two Computers”, and complete Steps 6 to 8. Step 5: i Computer B can now access the LAN.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.35Figure 4.21: Access Outside LAN Network Configuration 4.5 Access Internet through IVT BlueSoleil™ The following sections outline how to enable Computer B to access the Internet through Computer A. Computer A: Computer B: Desktop Notebook/ Laptop A Bluetooth Device A Bluetooth Device Windows 2000 Windows 2000 IVT BlueSoleil™ IVT BlueSoleil™ Network Adapter connecting to the InternetStep 1: i Make sure Computer A can access Internet. Start IVT BlueSoleil™ on both Computer A and Computer B. Please refer to “Section 3.2:Communication Between Two Computers”, and complete Steps 1 to 4. Step 2: Start the PAN service on Computer A. 1. In the BlueSoleil噡 Main Window, click View | Service Window.2. In the Service Window, right-click the Personal Area Networking icon. Choose Properties to configure my PAN service as AccessInternet and select a local physical adapter as the WAN Adapter (Figure 4.22), through which Computer A can access Internet. It automatically enables NAT (Network Address Translation, please refer to Windows Help Topic) function and a DHCP server. (Notes: The BT Network Adapter on the client side must be set to obtain an IP address automatically. The IP address is in the form of 192.168.18.xxx.) 3. Click Apply or OK button to save the configuration. 4. Right-click the Personal Area Networking icon again, and choose Start Service.Step 3: Setup connection between Computer A and Computer B. Please refer to “Section 3.2:Communication Between Two Computers”, and complete Steps 6 to 8. Step 4: i After Computer B gets an IP address as “192.168.18.xxx”, Computer B can now access the Internet through Computer A.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.36Figure 4.22: Access Outside WAN Network ConfigurationAdvanced Usage: i Computer A is now the center node of the network. Other computers with BlueSoleil™ installed, for example, Computers C, D and E, can connect to Computer A following the same steps as those for Computer B and access the Internet through Computer A. Computer A supports up to 7 connections at the same time. i Computers A, B, C, D and E can access each other using the Windows MyNetwork Places and form a Bluetooth ad-hoc networking. Computers B, C, D and E can then access the Internet through Computer A. Note:i Computer B also can share a dial-up connection of Computer A, in this case, please set up a dial-up connection for Computer A at first. While working with a dial-up connection, if the dial-up connection is destroyed for some reason, please restart the service after the dial-up connection established again. i The Internet Connection Sharing (ICS) of Windows (refer to Windows Help Topic) can also be used on computer A for computer B to access the Internet. In this situation, the PAN service configuration must be set as Bluetooth Group Ad-hoc Network without DHCP Server enabled. 4.6 PAN Configuration 4.6.1 My PAN Service In the BlueSoleil™ Service Window, right-click the Personal Area Networking icon. On the pop-up menu, select Properties to configure my PAN service.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.37Figure 4.23: Service Configuration Setting Items: i Auto start this service when my Bluetooth startsCheck this option to automatically start my PAN service the every time BlueSoleil™ is started. Work Mode i Set up Bluetooth Personal Area Network Choose this item to run in the GN mode. Check Enable DHCP Server, and aDHCP server will be started on the server side, so other devices will obtain an IP address (192.168.18.xxx) from the DHCP server after they connected to the GN. (Refer to Figure 4.1) i Access LAN Network Choose this item to run in the NAP mode, and other devices can access outside LAN network after they connected to the NAP. (Refer to Figure 4.3) i Access Internet Choose this item to run in the NAP mode, and other devices can access outside WAN network (e.g. Internet) after they connected to the NAP. (Refer to Figure 4.4)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.385 Dial-Up Networking 5.1 Introduction The Bluetooth Dial-up Networking (DUN) service allows a Bluetooth-enabled client to access the Internet wirelessly through a modem on another Bluetooth device or a cellular phone. The other Bluetooth device or the cellular phone is called the gateway (server) as it provides access to the public network. The DUN profile can be used in the following scenario: i A Bluetooth computer accesses the Internet through a Bluetooth cellular phone or Bluetooth modem. 5.2 Connect to a Dial-up Gateway from a Computer This section outlines the steps involved in a computer (client) accessing the Internet through a Bluetooth cellular phone. Computer A: Bluetooth Cellular Phone: Notebook/ Laptop Ericsson T39 cellular phone A Bluetooth Device Windows XP IVT BlueSoleil™ Step 1: Insert the Bluetooth Device in the computer and start BlueSoleil™ in the computer. Step 2: Set the Ericsson T39 to be discoverable so that Computer A can find the T39. 1. Press the Menu button on the T39 and scroll until you reach the Extras menu option, select Extras and scroll until you find Bluetooth. Select this option and scroll until you see Discoverable. Press the Yes button to confirm the selection. 2. The T39 will now enable itself to receive connection requests from other devices. Step 3: Add Computer A to the paired device list in the T39. 1. Press the Menu button on the T39 and scroll until you reach the Extras menu option, select Extras and scroll until you find Bluetooth. Select this option and scroll until you see Discover.Press the Yes button to confirm the selection. 2. The T39 will now start searching devices. Once the T39 finds “ComputerA” on the screen, select it by pressing the Yes button. The Add to paired? message appears on the screen. Press Yes to confirm you want to initialize pairing. 3. The T39 will ask for the Bluetooth passkey. You can input any
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.39number, for example, “1”. 4. On the BlueSoleil噡 side, the Enter Bluetooth Passkey window pops up requesting the Bluetooth passkey. Input the same Bluetooth passkey you have input in the T39 and click OK.5. Once the pairing process is successfully complete, the T39 device icon is displayed in the Main Window of Computer A. At the meanwhile, the following dialog pops up asking you whether Create a Shortcut on the windows desktop. If you choose yes, a shortcut icon called DUN will occur on the desktop, otherwise the icon will not occur. i This is the icon on the desktop: Step 5: Connect to phone DUN service: i Search for Bluetooth devices in Computer A until you find the T39. i In the Main Window of Computer A, double click the T39 device to find its DUN service. If found, the DUN service icon in the Main Window will turn pink. i In the Main Window of Computer A, double click the DUN service icon to connect to the DUN service on the T39. i Once the two computers are connected, the Bluetooth Dial-up Networking (DUN) service icon in the Main Window will turn from pink to green.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.40Figure 5.1: Connect BlueSoleil™ DUN Connection Step 6: Dial to Internet 1. The Connect BlueSoleil™ DUN Connection window appears (Figure 5.1). 2. Input a valid username, password and the Internet Service Provider’s (ISP’s) phone number, then click the Dial button. 3. If the dial-up is successful, a small icon appears on the bottom right hand of the Windows taskbar, indicating that the dial up connection is successfully established. 4. If the dial-up fails, the Bluetooth connection between the two computers will be disconnected. In this case, to reconnect to the T39’s DUN service, repeat Steps 5 above. Step 7: Once the dial-up connection is established, users can browse web sites or access other Internet services from Computer A. Step 8: There are three methods to disconnect the dial-up connection:i Method 1. Double-click the dial-up connection icon on the bottom right of the Windows taskbar. The BlueSoleil™DUN Connection Status window appears. Click the Disconnect button to disconnect the dial-up connection (Figure 5.2). i Method 2. Right-click the Bluetooth Dial-up Networking icon in the Main Window, and then click the Disconnect menu item on the pop-up menu. i Method 3. Right-click the T39 device in the Main Window and select Disconnect | Bluetooth Dial-Up Networking.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.41Figure 5.2: BlueSoleil噡 DUN Connection Status window 5.3 Settings for Dial-up Networking Profile (client side) in Windows98/Me Before using the Dial-up Networking (DUN) profile in Windows98/Me, ensure a Dial-up Adapter is already installed on the client computer. 5.3.1 Check if a Dial-up Adapter is installed Step 1: Select the Control Panel from the Start |Settings menu. Step 2: Double-click the Network icon. (Figure 5.3)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.42Figure 5.3: Windows Control Panel Step 3: Check if a Dial-up Adapter appears in the Network Component list. (Figure 5.4) Step 4: If a Dial-up Adapter is not found, then click Add to install one. Figure 5.4: Install Dial-up Adapter
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.43Step 5: Select Adapter from the Network Component list and click Add.(Figure 5.5 and Figure 5.6) Figure 5.5: Network Component list Figure 5.6: Select Adapter as the Network Component Type Step 6: Select Microsoft from the Manufacturers list on the left-hand side and select Dial-up Adapter in the Network Adapter list on the right hand side. (Figure 5.7 and Figure 5.8) Figure 5.7: Select Network Adapters (1)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.44Figure 5.8: Select Network Adapters (2) Step 7: Click OK to return to the Network property sheet. (Figure 5.9) Figure 5.9: Network property sheet Step 8: Click OK to close the Network property sheet. A message box pops up, click Yes to restart the computer. (Figure 5.10).
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.45Figure 5.10: Restart computer
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.466 Bluetooth Serial Port 6.1 Introduction The Bluetooth Serial Port (SPP) provides a virtual serial port via Bluetooth as an alternative to a hardwired serial cable between a computer and device. Any program that uses a standard serial port can use the Bluetooth serial port without any change. IVT BlueSoleil™ provides three Serial Port services, you can connect with three remote devices and be connected with three remote devices at the same time through serial ports. The SPP profile can be used in the following scenarios: i Connecting two computers through a Bluetooth serial port. i Using SPP to print a document. i Using a cellphone to control a computer through a Bluetooth serial port. i Connecting a computer to any other device that supports SPP through a Bluetooth serial port. 6.2 Connect Two Computers This section outlines the steps involved in connecting two computers, Computer A and Computer B using the Bluetooth Serial Port application. Computer A: Computer B: Notebook/ Laptop Desktop A Bluetooth Device A Bluetooth Device Windows 2000 Windows 2000 IVT BlueSoleil™ IVT BlueSoleil™ Step 1: Insert the Bluetooth Devices into each computer. Step 2: Start BlueSoleil™ in each computer. Step 3: i Start the SPP service on Computer A. Step 4: Connect Computer B to Computer A. 1. On Computer B double click the ‘My Device icon’ until you find the device, Computer A. 2. Double-click the Computer A device to find its SPP service (Figure 6.1). The Bluetooth Serial Port service icon turns pink. 3. Right-click the Bluetooth Serial Port service icon and select Connect.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.47Figure 6.1: Double-click the Computer A device icon i The connection is established successfully as shown in Figure 6.2. And the serial port number is shown on the right bottom status bar on Computer B. (Figure 6.3) Figure 6.2: The connection is established successfully Figure 6.3: The serial port number is shown
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.48Note: You can initiate three connections between the two computers through three serial ports. And at the same time, you can also be connected with three remote devices if you provide three SPP services. 6.3 Use SPP to Print a Document This section outlines the steps involved in connecting a computer to a Bluetooth Printer Adapter using SPP. Computer A: Bluetooth Printer Adapter B: Notebook/Laptop Printer A Bluetooth Device Bluetooth Printer Adapter Windows 2000 IVT BlueSoleil™ Step 1: Insert the Bluetooth Device into the computer. Step 2: Start BlueSoleil™ in the computer. Step 3: Connect Computer A to the Bluetooth Printer Adapter B using SPP. 1. Go to Computer A; double click the My Device icon’ until you find the device Bluetooth Printer Adapter B. 2. Double-click the Bluetooth Printer Adapter B device to find it’s SPP service.3. Double-click the SPP service icon to start connecting SPP. Step 4: Change the printer settings to use the connected Bluetooth serial port.Step 5: i Print a document. 6.4 Use a cellphone to control a computer This section outlines the steps involved in connecting a computer to a Bluetooth Cellphone using SPP. Computer A: Bluetooth Cellphone B: Notebook/Laptop Ericsson T39 or T68 A Bluetooth Device Windows 2000 IVT BlueSoleil™
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.49Step 1: Insert the Bluetooth Device into the computer. Step 2: Start BlueSoleil™ in the computer. Step 3: Connect Computer A to the Bluetooth Cellphone B using SPP. 1. Go to Computer A; double click the My Device icon’ until you find the device Bluetooth Cellphone B. 2. Double-click the Bluetooth Cellphone B device to pair with it. If pairing is finished successfully, then find it’s SPP service. 3. Double-click the SPP service icon to start connecting SPP. 4. The connected serial port number is shown on the right bottom status bar on Computer A. (Figure 6.4) Figure 6.4: The serial port number is shown Step 4: Select Start|Program|IVT Corporation|Control PC to open Mobile HID program. (Figure 6.5) Figure 6.5: Mobile HID Program Dialog Step 7: From the Serial Port list in the “Remote Control” window, select the serial port number that has been established connection. Then click Open button to enable Cellphone B controlling computer A. The Open button becomes to Close button automatically. (Figure 6.6) Figure 6.6: Click button to start controlling computer Step 8: A new menu will be added into the accessories menu in Cellphone B. Enter menus by the path: accessories -> Mobile HID -> Control PC -> Controlling. When Controlling window is shown, you can control Computer A by all keys in Cellphone B.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.50Step 9: If you want to disable Cellphone B controlling computer A,click Close button. The Close button becomes to Open button automatically. Or press down the No key in Cellphone B to exit Controlling window. The function of cellphone key map: Keys in cellphone Function definition Up,Down,Left,Right direction key mouse move (no UP,Down in T39) Key Yes Mouse left button Press down direction key (T68) Mouse right button Key c (T39) Mouse right button Volume Up Page Up Volume Down Page Down Key 1 Home Key 2 Arrow Up Key 3 End Key 4 Arrow Left Key 5 Arrow Down Key 6 Arrow Right Key 7 Start menu Key 8 Key Enter Key 9 Key F5 Key 0 Show desktop Key * Key Ctrl Key # Key Alt 6.5 SPP Configuration 6.5.1 My SPP Service In the BlueSoleil™ Service Window, right-click the Serial Port 1 or Serial Port 2 icon. On the pop-up menu, select Properties to configure the Serial Port1 and Serial Port 2.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.51Figure 6.9: SPP Service Configuration. Setting Items: i Auto start this service when my Bluetooth startsCheck this option to automatically start my Bluetooth SPP service #(1,2) every time BlueSoleil™ is started. (Figure 6.9)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.527 Bluetooth File Transfer 7.1 Introduction The File Transfer profile (FTP) supports the file transfer usage model, which offers the ability to transfer files from one Bluetooth device to the other. The FTP profile can be used in the following scenarios: i A computer can transfer files to/from another computer. 7.2 Transfer files to/from a Computer This section outlines the steps in transferring files between Computer A and Computer B. Computer A (Server) Computer B (Client) IVT BlueSoleil™ IVT BlueSoleil™ A Bluetooth Device A Bluetooth Device Note: BlueSoleil™ can inter-operate with other Bluetooth devices which support FTP profile. Step 1: Insert the Bluetooth Devices into each computer. Step 2: Start BlueSoleil™ in each computer. Step 3: Make sure File Transfer service is started on Computer A. Refer to Section 7.3 for service configurations. Step 4: Search for Computer A on Computer B, and connect to its FTP service (Figure 7.1). The remote folder is displayed in a Windows Explorer style window (Figure 7.2).
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.53Figure 7.1: The connection is successfully established Figure 7.2: The remote folder is displayed Step 5: Copy files and directories. i From Computer B to Computer A – upload Select files\ directories on Computer B and drag files into the Remote Shared Folder. (Figure 7.3) i From Computer A to Computer B – download Select files\ directories from the Remote Shared Folder and drag files into the desktop or a folder on Computer B. (Figure 7.4)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.54Figure 7.3: Upload files to Computer A Figure 7.4: Download files from Computer A
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.557.3 FTP Configuration In the BlueSoleil™ Service Window, right-click the File Transfer icon. On the pop-up menu, select Properties to configure the ‘my FTP service’ (Figure 7.5). Figure 7.5: Configure FTP service Setting Items: i Auto starts this service when my Bluetooth startsCheck this box to automatically start the File Transfer service every time BlueSoleil™ is started. i Root DirectoryThis sets the root directory that you want to share with other computers using Bluetooth. i Access PermissionsThis sets the access permission remote computers have to the shared root directory.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.568 LAN Access 8.1 Introduction The Bluetooth LAN Access Profile (LAP) allows Bluetooth-enabled devices to access the services of a LAN using Point-to-Point Protocol. In this usage model, multiple data terminals use a LAN access point as a wireless connection to a Local Area Network (LAN). Once connected, data terminals operate as if they are connected to the LAN via dial-up networking and can access all the services provided by the LAN. The LAN application can be used in the following scenarios: i A computer (or PDA) accesses a Local Area Network via a LAP Server. i A computer (or PDA) accesses a Local Area Network via a LAN access point. Note: Before using the LAN Access Profile in Windows98/Me, ensure that a Dial-up Adapter and Windows’s component direct cable are already installed on the computer. (See “Section 8.4: Settings for LAN Access Profile (client side) in Windows98/Me”). Moreover, every operating system should have an installation of NetBEUI protocol; otherwise, it cannot use computer name to visit other computer. 8.2 Access a Local Area Network (LAN) This section outlines the steps involved in connecting to a Local Area Network using the LAP application. Computer A: Computer B: Notebook/ Laptop Desktop A Bluetooth Device A Bluetooth Device Windows 2000 Windows 2000 IVT BlueSoleil™ IVT BlueSoleil™ Step 1: Insert Bluetooth Devices into both computers. Step 2: Start BlueSoleil™ in both computers. Step 3: i Start the LAP service on Computer A. Step 4: Make incoming connection on Computer A i Right-click on My Network Places; select Properties. (Figure 8.1)i On the Network and Dial-up Connections panel, right-click the Incoming Connection icon, and then select Properties on the pop up menu. (Figure 8.2)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.57Figure 8.1: Right-click My Network Places Figure 8.2: Select Properties on the pop up menu i Click Networking on the Incoming Connections Propertiespop-up window. (Figure 8.3) i Choose Internet Protocol (TCP/IP) and click Properties.(Figure 8.4)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.58Figure 8.3: Incoming Connections Properties Figure 8.4: Choose Internet Protocol (TCP/IP) i Select Specify TCP/IP addresses, and input the two IP addresses. The subnet mask of the two IP addresses should be the same as the subnet of the LAN Computer A belongs to. (Figure 8.5)
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.59Figure 8.5: Input the IP addresses Step 5: Connect to Computer A.1. Search for Computer A on Computer B. 2. Find the LAP service of Computer A. 3. Right-click the LAP service icon; select Connect on the pop-up menu. (Figure 8.6) Figure 8.6: Select Connect i The Connect BlueSoleil™ LAP Connection window pops up. Input a username and password. (Figure 8.7) i The connection is then established.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.60Figure 8.7: Input Username and Password Step 6: Computer B can now access the LAN via Computer A. 8.3 Access a LAN via a LAN Access Point This section outlines the steps involved in accessing a LAN through a LAN access point.LAN Access Point A: Computer B Bluetooth access point Notebook/Laptop A Bluetooth Device Windows 2000 IVT BlueSoleil™ Step 1: Connect LAN access point to the Local Area Network. i Set the LAN access point’s name to anything you want. Here it is named LAN Access Point A. i Set LAN Access Point A’s IP address to be in the same range as the other computers in the LAN. Step 2: Insert the Bluetooth Device into the computer. Step 3: Start BlueSoleil™ in the computer. Step 4: Connect to the LAN Access Point A.1. Find the LAP service of LAN Access Point A 2. Double-click on the LAN Access Point A device icon on
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.61Computer B. 3. Right-click the LAP service icon; select Connect on the pop-up menu.i The Connect BlueSoleil™ LAP Connection window pops up. Input username and password. (Figure 8.8) i The connection is now established. (Figure 8.9) Figure 8.8: Input username and password Figure 8.9: Successful connection to the LAN Access Point Step 5: Access other computers in the LAN. i Now Computer B can access the LAN via LAN Access Point A. 8.4 Settings for LAN Access Profile (client side) in Windows98/MeBefore using the LAN Access Profile in Windows98/Me, ensure that a Dial-up Adapter and Windows’s component direct cable connection are installed on the client computer.
IVT BlueSoleil™ User Manual Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com All specifications are preliminary and subject to change without notice.62See “Section 5.3.1: Check if a Dial-up Adapter is installed”, to check if a Dial up Adapter is installed in your computer. 8.4.1 Check if a Windows Component Direct Cable Connection is installedStep 1: Select Control Panel from the Start | Settings menu, Step 2: Double-click the Add/Remove Programs icon. (Figure 8.10) Figure 8.10: Double-click the Add/Remove Programs icon Step 3: Select the Windows Setup tab in the Add/Remove ProgramsProperties window. (Figure 8.11)

Navigation menu