BT Links BT-20 Bluetooth USB Dongle User Manual BT 20S UserMan 2

Download:
Mirror Download [FCC.gov]
Document ID	579931
Application ID	4V/DYC2HWWNhD7/6edpi8g==
Document Description	Users Manual 2 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	186.59kB (2332426 bits)
Date Submitted	2005-09-09 00:00:00
Date Available	2005-09-09 00:00:00
Creation Date	2005-09-07 06:07:14
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-09-07 15:20:18
Document Title	BT-20S UserMan 2.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	amy.lee

IVT BlueSoleil™ User Manual
Figure 8.11: Select Windows Setup tab
Step 4:
Double-click the Communications item in the Windows Setup
component list to check the properties. (Figure 8.12)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
63
IVT BlueSoleil™ User Manual
Figure 8.12: Double-click Communications item
Step 5:
Check if Direct Cable Connection is selected. If not, select it and
click OK to install a Direct Cable Connection. (Figure 8.13)
Figure 8.13: Check if Direct Cable Connection is selected
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
64
IVT BlueSoleil™ User Manual
8.5
8.5.1
Usage of LAN Access Profile (server side) in
Windows98/Me
Configure a LAP server in Windows 98/ Me
Step 1:
Start the LAP service.
i See “Section 8.2: Access a Local Area Network (LAN)”, Steps 1 to
5.
i If this is the first time the service is started n Windows 98/Me, the
Direct Cable Connection window pops up.
Step 2:
Select Host and click the Next button. (Figure 8.14)
Figure 8.14: Direct Cable Connection window
Step 3:
Select Bluelet NULL Modem (Server) and click Next. (Figure 8.15)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
65
IVT BlueSoleil™ User Manual
Figure 8.15: Select Bluelet NULL Modem (Server)
Step 4:
Click the Finish button. (Figure 8.16)
Figure 8.16: Click Finish button.
Step 5:
Finally, the Direct Cable Connection window pops up. It is now
possible to connect to the LAP server. No password is required.
Figure 8.17: Connection created
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
66
IVT BlueSoleil™ User Manual
Note: The above steps are applicable when configuring the LAP server for the first
time only. The next time the LAP service is started, the Direct Cable Connection
window (Figure 8.17) appears.
8.5.2
Set-up a LAP connection from Windows 2000 to Windows
98/Me
Step 1:
In the Connect BlueSoleil LAP Connection window click
Properties and a window as shown in Figure 8.18 pops up.
Figure 8.18: Connect BlueSoleil LAP Connection window
Step 2:
Select the Security tab in BlueSoleil LAP Connection window.
Select Advanced (custom settings) and click Settings. (Figure
8.19)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
67
IVT BlueSoleil™ User Manual
Figure 8.19: Select Advanced (custom settings)
Figure 8.20: Advanced Security Settings window
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
68
IVT BlueSoleil™ User Manual
Step 3:
Select Allow older MS-CHAP version for Windows 95 servers
and click OK. (Figure 8.21)
Figure 8.21: Select Allow older MS-CHAP version for Windows 95 servers
Step 4:
Select the Yes button. The LAP client in Windows 2000 is now able to
connect to the LAP server in Windows 98/Me. (Figure 8.22)
Note: The IVT Corporation LAP service does not require a password.
Figure 8.22: Click Yes button
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
69
IVT BlueSoleil™ User Manual
Object Push
9.1
Introduction
The Bluetooth Object Push profile (OPP) is an application that offers a way to send
and receive Personal Information Management (PIM) data objects from one
Bluetooth-enabled device to or from the other one.
The objects Object Push supports the following four formats:
i Business cards (*.vcf)
i Calendar entries (*.vcs)
i Notes (*.vnt)
i Messages (*.vmg)
The OPP profile can be used in the following scenarios:
i Connecting a computer to a Bluetooth cellular phone (or PDA), and transferring
objects from the computer to the cellular phone (or PDA).
i Connecting a computer to a Bluetooth cellular phone (or PDA), and transferring
objects from the cellular phone (or PDA) to the computer.
i Connecting two computers and transferring objects between them.
9.2
Transfer Objects from a Computer to a Bluetooth
Cellular Phone
This section outlines the steps involved in transferring OPP objects from a
Computer to a Bluetooth cellular phone.
Computer A:
Bluetooth Cellular Phone:
IVT BlueSoleil™
Ericsson T39
A Bluetooth Device
Step 1:
Insert the Bluetooth Device into the computer.
Step 2:
Start BlueSoleil™ in the computer.
Step 3:
Configure the business card of Computer A.
1. Open the Service Configuration window and select the Object
Push page. In the BlueSoleil™ Main Window, click Tools |
Configuration | My Services (Figure 9.1).
2. Check the boxes, Send Business Card on Request, Accept
Business Card, Accept Calendar Items, Accept Email Messages
and Accept Notes.
3. To set ‘my business card’, click the box Send My Business Card
(*.VCF). This opens the Open File window. Select a VCF file as
your own business card and click the Open button. Click the OK
button on the Service Configuration window. If you do not set a
business card, the program will generate a business card file
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
70
IVT BlueSoleil™ User Manual
automatically using your computer name. (Figure 9.2)
Figure 9.1: Service Configuration
Figure 9.2: Open File
Step 4:
To obtain a VCF card file from MS Outlook.
i Open MS Outlook, and select the Contacts item in Outlook
Shortcuts. (Figure 9.3)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
71
IVT BlueSoleil™ User Manual
Figure 9.3: MS Outlook main window
i If there are no contacts entered, the following message appears
on the main window “There are no items to show in this
view. Double-click here to create a new Contact.”
Double-click and a pop-up window appears. (Figure 9.4)
Figure 9.4: Create a new contact
i Enter your Contact information. Click File | Save as and a Save
As window pops up. Select the name of the file and the directory
where you want to save the file. Select the vCard Files (*.vcf)
item in the Save as type box. Click the Save button. (Figure 9.5)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
72
IVT BlueSoleil™ User Manual
Figure 9.5: Save new Contact
Step 5:
Set the T39 to be discoverable.
i Press the Menu button on the T39 to find the menu list, and then
select the Extras item. Press the Yes key to enter the Extras
menu, and then select the Bluetooth item. Then select the
Discoverable item.
Step 6:
Pair with T39
If the pairing succeeds, you will see the services of the T39 include the
OPP service. (Figure 9.6) If you have never created a shortcut DUN,
the following dialog pops up asking you whether Create a Shortcut
on the windows desktop. If you choose yes, a shortcut icon called
DUN will occur on the desktop, otherwise the icon will not occur. For
details, please refer to the related part of DUN.
Figure 9.6: Find the services
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
73
IVT BlueSoleil™ User Manual
Step 7:
To send or get objects data, right-click the OPP service icon. There are
four options (Figure 9.7) on the pop-up menu:
i Send My Card: Click this menu item, and a business
card from Computer A is sent to the T39.
i Get Card: Click this menu item to receive a business card
from the T39. Open the folder inbox to check if you have
received the card.
(Note: Open the My Documents folder on the computer
and find a new folder called BlueSoleil. Open this folder
to find the subfolders inbox and outbox. Inbox is used
to deposit the objects received from other Bluetooth
devices. Outbox is used to deposit the objects you want
to send to other Bluetooth devices.)
i Send Objects: Click this menu item to send an object in
Computer A to the T39 (there are four types of object:
*.vcf, *.vcs, *.vmg, *.vnt). Select the objects that you
want to send in the window that pops up and click Open.
i Exchange cards: Click this menu item to exchange
business cards between Computer A and the T39.
Figure 9.7: Four types of operation
9.3
Transfer Objects from a Bluetooth Cellular Phone to
a Computer
This section outlines the steps involved in transferring OPP objects from a
Bluetooth cellular phone to a computer.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
74
IVT BlueSoleil™ User Manual
Computer A:
Bluetooth Cellular Phone:
IVT BlueSoleil™
Ericsson T39
A Bluetooth Device
Step 1:
Insert the Bluetooth Device into the computer.
Step 2:
Start BlueSoleil™ in the computer.
Step 3:
i Configure the OPP service attribute of Computer A, and start the
OPP service.I
Step 4:
Step 5:
i Discover and pair Computer A on the T39.
Start the OPP operation.
i Select Menu | Phone book | Business cards on the T39.
i To send “my card” from the T39.
From the Business cards menu, select Send my own
and then select Via Bluetooth. The T39 searches the
surrounding Bluetooth devices. To send the business card
from the T39 to Computer A, select ‘Computer A’ on the
T39 screen.
i To select an object and send it.
From the Business cards menu, select Send contact
and then select Via Bluetooth. The T39 asks you to
select the object that you want to send. Select an object
and send it as specified above.
i To receive a business card.
From the Business cards menu, select Receive and
then select Via Bluetooth. The T39 is now in
discoverable status, and you can send an object to it from
other Bluetooth devices.
i To send all business cards.
From the Business cards menu, select Send all and
then select Via Bluetooth. Select the destination device
Computer A. The T39 then sends all its *.vcf files to
Computer A.
9.4
Transfer Objects between Two Computers
This section outlines the steps involved in transferring OPP objects between two
Computers (Computer A and Computer B).
Computer A:
Computer B:
IVT BlueSoleil™
IVT BlueSoleil™
A Bluetooth Device
A Bluetooth Device
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
75
IVT BlueSoleil™ User Manual
9.5
Step 1:
Insert Bluetooth Devices in both computers.
Step 2:
Start BlueSoleil™ in both computers.
Step 3:
Start the OPP service on Computer B.
Step 4:
Perform an OPP operation. (See “Section 9.3: Transfer Objects from a
Bluetooth Cellular Phone to a Computer”, Step 5)
Configure OPP Service
In the BlueSoleil™ Service Window, right-click the Object Push icon. To configure
‘my OPP service’, select Properties on the pop-up menu.
Figure 9.8: Configure OPP service
Setting Items:
i Auto start this service when my Bluetooth starts
Select this item if you want to automatically start the OPP service every time
BlueSoleil噡 starts.
i My Business Card (*.vcf)
You must select your own business card (*.vcf file) every time you start
BlueSoleil噡. If you forget to do this, BlueSoleil噡 creates a *.vcf file using your
computer name and regards this file as your own business card.
i Send Business Card on Request
Select this item to allow other users to receive your business card.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
76
IVT BlueSoleil™ User Manual
i Receive Business Card
There are four possible items here. Each item represents one type of object.
You may select the object types that you want to accept.
- Accept Business Card to accept business cards (*.vcf)
- Accept Calendar Items to accept calendar items (*.vcs)
- Accept Email Messages to accept email messages (*.vmg)
- Accept Notes to accept notes (*.vnt)
9.6
9.6.1
Using OPP in Microsoft Outlook
The GUI of Outlook Application with bluetooth plug-in
After correct installation of BlueSoleil, lunch the Outlook application. If the GUI
looks like the following, namely there are four buttons added into the toolbar and
File menu, the OPP is integrated into Outlook successfully.
Notice: both the OPP and Synchronization functionalities are available in Microsoft
Office 2000( or higher version) and , BlueSoleil must start first.
Figure 9.9: OPP and Sync integrated with Outlook
9.6.2
The usage of OPP Push-function
Start the Outlook application and select Contacts from the shortcuts to browse the
Contacts folder. Select the item(s) to be pushed then click the Push button from
the toolbar or File menu. If BlueSoleil is running properly, a dialog will appear with
all discovered bluetooth devices listed.
From the devices list, user can select the target device and then click the Push
button.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
77
IVT BlueSoleil™ User Manual
Figure 9.10: Select the target device and click Push button
The operation result will be reported on the dialog.
Figure 9.14:
Push operation completed Successfully
As to other items, for example, note, message and calendar, the steps are the
same with ones above.
9.6.3
The usage of OPP-Pull function
Click the Pull button from toolbar or File menu then the devices list dialog will
appear. Select the target device from the list and click the Pull button to perform
OPP-Pull function.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
78
IVT BlueSoleil™ User Manual
Figure 9.15:
Before Pull only one card named “holk”
Figure 9.16:
The card named “zerg” is pulled in.
If the operation completes successfully the newly pulled card is imported into
Outlook.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
79
IVT BlueSoleil™ User Manual
10
Synchronization
10.1 Introduction
Using Bluetooth Synchronization (SYNC), Bluetooth devices can synchronize
messages, notes, calendars and cards with each other.
The objects Synchronization (SYNC) supports are:
i Business cards (*.vcf)
i Calendar entries (*.vcs)
i Notes (*.vnt)
i Messages (*.vmg)
The SYNC application is typically used in the following scenarios:
i A computer exchanging PIM (Personal Information Management) data with a
cellular phone or PDA.
i Two computers exchanging PIM data with each other.
10.2 Exchange PIM Data with a Cellular Phone
This section outlines the steps involved in connecting a computer to a Bluetooth
cellular phone. The cellular phone works as a server that provides the SYNC
service.
Computer A:
Bluetooth Cellular Phone:
IVT BlueSoleil™
Ericsson T39
A Bluetooth Device
Step 1:
Insert the Bluetooth Device into the computer.
Step 2:
Start BlueSoleil™ in the computer.
Step 3:
Configure the T39.
i Set T39 to be discoverable.
Step 4:
Start synchronization.
i Now use the computer running BlueSoleil™ to start the
synchronization. (See “Section 9.3: Transfer Objects from a
Bluetooth Cellular Phone to a Computer”, Step 5).
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
80
IVT BlueSoleil™ User Manual
10.3 Set up SYNC Connection between Two Computers
This section outlines the steps involved in setting up a SYNC connection between
two computers, Computer A and Computer B. Computer A works as a server that
provides the BlueSoleil噡 SYNC service. Computer B works as a client that uses the
SYNC service provided by Computer A.
Computer A:
Computer B:
IVT BlueSoleil™
IVT BlueSoleil™
A Bluetooth Device
A Bluetooth Device
Step 1:
Insert the Bluetooth Devices into each computer.
Step 2:
Start BlueSoleil™ in each computer.
Step 3:
Start the BlueSoleil噡 SYNC service on Computer A. Before starting
the SYNC Server, it may need to be configured. To configure the
server, follow the steps below:
i In the Main Window click View | Service Window
i In the Service Window, right-click the Information
Synchronization icon. Select Properties on the pop up menu.
i Set the option you require, and then click OK. (Figure 10.1)
Figure 10.1: Service Configuration
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
81
IVT BlueSoleil™ User Manual
Step 4:
i Connect to the SYNC service of Computer A. (Figure 10.2)
Figure 10.2: Connection is established successfully
i The SYNC clients can now start synchronization. Press the green
button to begin synchronization. (Figure 10.3)
Figure 10.3: Press the green button
Advanced Usage:
i Before synchronization select the data type that you want to exchange. Leave
the checkbox unchecked to disable the object type that you do not support.
i During synchronization push the red button if you want to stop the
synchronization.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
82
IVT BlueSoleil™ User Manual
i Open Microsoft Outlook to check the information data that saved in the folder of
Contacts(VCARD), Calendar(VCAL), Notes(VNOTE) and Inbox(VMSG) after
synchronization. (Figure 10.8)
Figure 10.8: Microsoft Outlook
10.4
Synchronization Configuration
In the BlueSoleil™ Service Window, right-click the Information Synchronization
icon. To configure the synchronization service select Properties on the pop-up
menu. (Figure 10.9)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
83
IVT BlueSoleil™ User Manual
Figure 10.9: Service Configuration
Setting Items:
i Auto start this service when my Bluetooth starts
Check this item to start my synchronization service automatically every time
BlueSoleil™ is started.
i Options
This service supports options for vCard, vCalendar, vMessage and vNote data
types. You can select the data type you want to support.
10.5
Using Synchronization in Outlook
After correct installation of BlueSoleil the GUI of Outlook application looks like
figure 9.12.
Notice: This function requires Microsoft Office 2000 or higher version and is
available only when BlueSoleil is running properly.
10.5.1 The usage of synchronization
Click the Synchronization button from the toolbar or File menu, from the devices
list dialog user can select the target device to synchronize with.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
84
IVT BlueSoleil™ User Manual
Figure 10.10:
Select the target device to synchronize with
After selecting the target device, the Sync-dialog appears.
Figure 10.11:
Choose the item type to synchronize
Click the Sync button from the toolbar or File menu to start the synchronization
process, during and after the synchronization process the current status will be
displayed to users.
Figure 10.12:
The status when operation finished
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
85
IVT BlueSoleil™ User Manual
Just like the OPP-Pull function, the synchronization’s result will be visible in Outlook
application. The following two diagrams show the Note folder before and after the
synchronization.
Figure 10.13:
Before Synchronization
Figure 10.14:
After Synchronization
User can set the most often-used device to default device. From the devices list
dialog please choose the right device and then click Set Default button. So when
synchronize next time user can click My Synchronization button to start
synchronization directly avoiding the time-consuming selecting device steps. When
mouse move onto the button the message tip will display current default device
information.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
86
IVT BlueSoleil™ User Manual
11
Hardcopy Cable Replacement
11.1 Introduction
The Bluetooth Hardcopy Cable Replacement profile (HCRP) provides services to
replace the cable between a host and peripheral device with a Bluetooth link. The
most common devices using these services are laptops and desktop computers,
however other devices are not excluded.
The HCRP profile can be used in the following scenario:
i Print a document using a Bluetooth Printer.
11.2 Print a Document Using a Bluetooth Printer
This section outlines how to print a document from Computer A (client) using a
Bluetooth Printer (server)
Computer A:
Bluetooth Printer B:
Notebook/Laptop
Bluetooth Printer
A Bluetooth Device
Windows 2000
IVT BlueSoleil™
Step 1:
Insert the Bluetooth Device into the computer.
Step 2:
Start BlueSoleil™ in the computer.
Step 3:
Turn on the Bluetooth printer to provide the HCRP service for
Computer A.
Step 4:
Connect the two devices.
1. Search for Bluetooth devices on Computer A
2. Search the HCRP services of Printer B.
3. Double-click the HCRP service icon to connect Computer A and the
Bluetooth printer.
Step 5:
Once the connection is established, please check:
i If there is no driver installed for the Bluetooth printer,
then BlueSoleil™ displays a message asking the user to
install a driver for the Bluetooth Printer, see the Windows
system icons in the bottom right hand corner of the
Windows desktop. (Figure 11.1) Install the driver for the
printer on Computer A and set its port to COMx.
i If there is already a driver installed for the Bluetooth
printer, a message appears indicating that the Bluetooth
printer is ready (Figure 11.2). BlueSoleil™ sets the
Bluetooth printer’s port to COMx (e.g. COM3). If there are
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
87
IVT BlueSoleil™ User Manual
several drivers for the Bluetooth printer installed on
Computer A, BlueSoleil™ automatically sets one of them
as the Bluetooth printer.
Figure 11.1: Bluetooth Printer Driver is not installed
Figure 11.2: Bluetooth Printer Driver is ready
Step 6:
Print documents.
i Computer A and Bluetooth Printer B are now connected. On
Computer A, open the document that you want to print. Select
File |Print. Then select the Bluetooth printer and print.
Step 7:
Disconnect the Bluetooth Printer.
i Right-click the HCRP service icon; select Disconnect on the pop
up menu.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
88
IVT BlueSoleil™ User Manual
12
Human Interface Device
12.1 Introduction
A typical Bluetooth Human Interface Devices (HID) is a Bluetooth-enabled mouse,
keyboard or joystick. The HID service allows wireless communication to Bluetooth
HID devices.
The HID profile can be used in the following scenarios:
i Connecting a computer to a Bluetooth Mouse.
i Connecting a computer to a Bluetooth Keyboard.
12.2 Connect a Computer to a Bluetooth Mouse
This section outlines how to connect a computer (Computer A) to a mouse
(Bluetooth Mouse B).
Computer A:
Bluetooth Mouse B:
Desktop
Bluetooth wireless mouse
A Bluetooth Device
Windows 2000
IVT BlueSoleil™
Step 1:
Insert the Bluetooth Device into the computer.
Step 2:
Start BlueSoleil™ in the computer and set the security level to low
using the Tools | Configurations | Security menu.
Step 3:
Power on the Bluetooth mouse. (Bluetooth Mouse B)
Step 4:
Connect to HID service:
1. Search for Bluetooth devices in Computer A until you find
Bluetooth Mouse B.
2. Double-click the Bluetooth Mouse B device icon to find it’s HID
service. If found, the HID service icon turns red. (Figure 12.1)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
89
IVT BlueSoleil™ User Manual
Figure 12.1: Find Bluetooth mouse and its service
Step 5:
6:
Step
Double-click the HID service icon to connect to Mouse B. After the
connection is successfully set-up, a dashed line appears between the
center ball and the Mouse B icon. The HID service icon turns green.
Install drivers for Bluetooth mouse.
i If this is the first time Computer A has connected to a Bluetooth
mouse, wait for a few seconds to allow Windows to install drivers
for a Bluetooth mouse.
i You will see two new devices in Computer A: Bluetooth HID
Mouse in ‘Human Interface Devices’ class and HID-compliant
mouse in ‘Mice and other pointing devices’ class. (Figure 12.2)
Step 7:
Now the Bluetooth mouse is ready to use. You can use it as a legacy
PS/2 or serial mouse.
Step 8:
To disconnect Mouse B.
i Right-click the HID service icon in the Main Window and click
Disconnect. Alternatively right-click Mouse B in the Main Window
and select Disconnect | Human Interface Device.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
90
IVT BlueSoleil™ User Manual
Figure 12.2: New HID mouse device in Device Manager
12.3 Connect a Computer to a Bluetooth Keyboard
This section outlines how to connect a computer (Computer A) to a keyboard
(Bluetooth Keyboard B).
Computer A:
Bluetooth Keyboard B:
Desktop
Bluetooth wireless keyboard
A Bluetooth Device
Windows 2000
IVT BlueSoleil™
Step 1:
Insert the Bluetooth Device into the computer.
Step 2:
Start BlueSoleil™ in the computer and set the security level to low
using the Tools | Configurations | Security menu.
Step 3:
Power on the Bluetooth keyboard. (Bluetooth Keyboard B)
Step 4:
Connect to Keyboard. (Figure 12.3)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
91
IVT BlueSoleil™ User Manual
Figure 12.3: Connect to Bluetooth keyboard
Step 5:
Install drivers for the Bluetooth keyboard.
i If this is the first time Computer A has connected to a Bluetooth
keyboard, wait for a few seconds to allow Windows install drivers
for a Bluetooth keyboard.
i You will see two new devices in Computer A: Bluetooth HID
Keyboard in ‘Human Interface Devices’ class and HID
Keyboard Device in ‘Keyboards’ class. (Figure 12.4)
Figure 12.4: New HID keyboard device in Device Manager
Step 6:
Now the Bluetooth keyboard is ready to use. You can use it as a
legacy PS/2 keyboard
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
92
IVT BlueSoleil™ User Manual
legacy PS/2 keyboard.
Step 7:
To disconnect Keyboard B.
i Right-click the HID service icon in the Main Window and click
Disconnect. Alternatively right-click Keyboard B in the Main
Window and select Disconnect | Human Interface Device.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
93
IVT BlueSoleil™ User Manual
13
FAX
13.1 Introduction
The Bluetooth Fax service allows a Bluetooth-enabled client to send fax messages
wirelessly through a fax modem on another Bluetooth device or a cellular phone.
The other Bluetooth device or the cellular phone is called the fax gateway (server)
as it provides the service to send/receive fax messages.
The FAX profile can be used in the following scenario:
i A Bluetooth computer sends/receives fax messages through a Bluetooth
cellular phone or Bluetooth fax modem.
13.2 Connect to a FAX Gateway from a Computer
This section outlines the steps involved in a computer (client) sending a fax
message through a Bluetooth cellular phone.
Computer A:
Bluetooth Cellular Phone:
Notebook/ Laptop
Ericsson T39 cellular phone
A Bluetooth Device
Windows 2000
IVT BlueSoleil™
Step 1:
Insert the Bluetooth Device in the computer.
Step 2:
Start BlueSoleil™ in the computer.
Step 3:
i Set the Ericsson T39 to be discoverable so that Computer A can
find the T39.
Step 4:
Step 5:
i Add Computer A to the paired device list in the T39.
Connect to the phone FAX service
13.3 Using FAX software on a bluetooth computer
There are many commercial or free fax software could be found. And they all can
work with IVT BlueSoleil. Since these fax software have their own MMI feature, the
usages will not be listed step by step.
Please check the following setting in FAX software before using it:
i The FAX modem must be set to “Bluelet Fax Modem”. This “Bluelet Fax
Modem” device is added to windows modem device list when BlueSoleil is
installed.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
94
IVT BlueSoleil™ User Manual
And please make sure the bluetooth connection has been set up between the
computer and FAX Gateway˄refer to Section 12.2˅.
Figure 13.1 Settings in Fax2000
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
95
IVT BlueSoleil™ User Manual
14
Headset
14.1 Introduction
The Bluetooth Headset Profile defines the procedures implementing audio wireless
transmission on SCO channels. It provides services to replace the cable between an
Audio Gateway and Headset with a Bluetooth link.
Audio Gateway (AG) – This is the device that is the gateway of the audio, both for
input and output. Typical devices acting as Audio Gateways are cellular phones and
personal computer.
Headset (HS) – This is the device acting as the Audio Gateway’s remote audio input
and output mechanism.
Now BlueSoleil acts as Audio Gateway, which can initiate a connection to a headset
and can also provide service for headset to be connected.
The Headset profile in BlueSoleil can be used in the following scenario:
i Play music from computer to Headset wirelessly.
i Record sound from Headset to computer wirelessly.
i Chat with chatting tools using Headset as voice input/output device.
14.2 Create an audio connection between computer and
Headset
This section outlines how to create an audio connection between Computer A and
Headset. Here, the name of the demo headset is EL-235.
Computer A
Headset
Notebook/Laptop
Bluetooth Headset
A Bluetooth Device supporting SCO
Windows 2000 or Windows XP
IVT BlueSoleil™
Step 1:
Insert the Bluetooth Device into computer A.
Step 2:
Start BlueSoleil™ on computer A.
Step 3:
Power on Headset EL-235 to supply headset service and make it
discoverable.
Step 4:
Search for Headset device on Computer A.
i Double-click the My Device icon
Headset EL-235.
until you find the device
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
96
IVT BlueSoleil™ User Manual
Step 5:
Find the headset service of Headset EL-235 .
i Double-click the Headset EL-235 device icon
on Computer A.
i Enter the Bluetooth passkey (Generally,0000), if necessary, to
start authentication.
i Once authentication is complete, the Headset service is found.
Step 6:
Connect to Headset EL-235.
After creating pairing relationship between Headset and dongle, we
can establish the audio connection in several ways:
i Right-click Headset service icon; select Connect on the pop-up
menu. The headset ring to alert the user. After the user answers
the call, the connection will be established. (Figure 14.2) But, if
user does not answer after 20 rings, the connection will be
released.
i Make sure you have started your Headset AG service in Service
Window. You can press answer key on your headset, and then it
will initiate a connection to BlueSoleil.
Figure 14.2: The connection is successfully established
Step 7:
i Play music, record sound or chatting, please refer to Chapter
14.3
Step 8:
After using Headset, you can disconnect the connection as follows.
i If BlueSoleil initiate connection to Headset,
Right-click Headset service icon; select Disconnect on the
pop-up menu.
i Or, press answer key on Headset to release this connection.
i If BlueSoleil is connected by headset,
Press answer key on Headset to release this connection.
i Or, stop Headset AG service in Service Window.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
97
IVT BlueSoleil™ User Manual
14.3 Using Headset Profile in BlueSoleil
14.3.1 Play music from computer to Headset wirelessly
After creating audio connection (for details about how to create an audio
connection, please refer to Chapter 14.2), you can play music files using popular
music player on Computer A. Open music files (e.g. mp3, WMA, rm etc.) with
Winamp or other media player program and play them, the music can be heard on
Headset. (Figure 14.3)
Figure 14.3 Play Music Files on Computer A
14.3.2 Record sound from Headset to computer wirelessly.
After creating audio connection (for details about how to create an audio
connection, please refer to Chapter 14.2), you can record sound on
Computer A. (Figure 14.4)
Figure 14.4: Record Sound on Computer A
14.3.3 Chat with chatting tools using Headset as voice
input/output device.
After creating audio connection (for details about how to create an audio
connection, please refer to Chapter 14.2), you can chat with you friends by
chatting tools such as MSN, NetMeeting and so on.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
98
IVT BlueSoleil™ User Manual
Take NetMeeting as an example.
Open NetMeeting Program, select Tools | Audio Tuning Wizard…, click Next,
the following dialogoccurs, choose as show in this dialog. Click Next until finishing
configuration. (Figure 14.5)
Figure 14.5: Audio Tuning Wizard on Computer A
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
99
IVT BlueSoleil™ User Manual
15
Advanced Audio Distribution
15.1 Introduction
The Bluetooth Advanced Audio Distribution Profile (A2DP) defines the procedures that
realize distribution of audio content of high-quality in mono or stereo on ACL channels.
It provides services to replace the cable between an Audio Source and Sink with a
Bluetooth link.
The A2DP profile can be used in the following scenario:
i Play music between computer and AV Headphone wirelessly.
i Play music between two computers wirelessly.
15.2 Play music between computer and AV Headphone
wirelessly
This section outlines how to play music from Computer A and listen to the music on
AV Headphone B.
Computer A
AV Headphone B
IVT BlueSoleil™
IVT Stereo Headphone
A Bluetooth Device
Windows 2000 or Windows XP
Step 1:
Insert the Bluetooth Device into computer A.
Step 2:
Start BlueSoleil™ on computer A.
Step 3:
Power on IVT Stereo Headphone to supply AV Headphone service.
Step 4:
Search for AV Headphone B on Computer A.
i Double-click the My Device icon
Headphone B.
Step 5:
until you find the device AV
Find the AV Headphone service of AV Headphone B.
i Double-click the AV Headphone B device icon on Computer A.
(Figure 15.1)
i Enter the Bluetooth passkey (if security is set to High on either
side) to start authentication.
i Once authentication is complete, the AV Headphone service is
found.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
100
IVT BlueSoleil™ User Manual
Figure 15.1: Double-click the Computer B device icon
Step 6:
Connect to AV Headphone B.
i Right-click the AV Headphone service icon; select Connect on the
pop-up menu. The connection will be established. (Figure 15.2)
Figure 15.2: The connection is successfully established
Step 7:
All the audio media played on Computer A can be heard on AV
Headphone B.
i Open music files (e.g. mp3, CD, rm etc.) with Windows Media
Player or RealOne Player or other media player and play them,
the music can be heard on AV Headphone B. (Figure 15.3, Figure
15.4)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
101
IVT BlueSoleil™ User Manual
i When playing VCD or DVD on Computer A, the audio part can be
listened on AV Headphone B.
Figure 15.3: Play Music Files on Computer A
Figure 15.4: Play Music Files on Computer A
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
102
IVT BlueSoleil™ User Manual
15.3 Play music between two computers wirelessly
This section outlines how to play music from Computer A (Client) and listen to the
music on Computer B (Server).
Computer A:
Computer B:
Notebook/Laptop
Notebook/Laptop
A Bluetooth Device
A Bluetooth Device
A physical Sound Card
Windows 2000 or Windows XP
Windows 2000 or Windows XP
IVT BlueSoleil™
IVT BlueSoleil™
Step 1:
Insert the Bluetooth Device into each computer.
Step 2:
Start BlueSoleil™ on each computer.
Step 3:
Configure the AV Headphone service
on Computer B.
i In the Service Window, right-click the AV Headphone icon. Select
Properties on the pop-up menu.
i The Service Configuration window pops up. (Figure 15.5)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
103
IVT BlueSoleil™ User Manual
Figure 15.5: Service Configuration Window
i In the Playback device field select the device that you want to
use. (Figure 15.5) Once the playback device is selected, it will be
used until you select another one.
i For the first time the AV Headphone service is started, this step is
mandatory. Otherwise, if you don’t want to change the layback
device, this step can be skipped.
Step 5:
Start AV Headphone Service on Computer B.
i In the Service Window, right-click the AV Headphone icon.
Select Start Service on the pop-up menu.
Step 6:
Configure the Codec priority on Computer A.
i In the main Window, right-click the Bluetooth AV Headphone
icon
15.6)
. Select Configuration on the pop-up menu. (Figure
i The Codec Priority Configuration window pops up.
i The Codec List is a descending priority-ranked list. Select the
Codec and click button Up and Down to adjust its priority. When
connecting with the AV Headphone Server, the upper Codec has
the higher priority to be used.
i If you don’t want to change the priority of the Codec, this step can
be skipped.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
104
IVT BlueSoleil™ User Manual
Figure 15.6: Main Window
Step 7:
Search for Computer B on Computer A.
i Double-click the My Device icon until you find the device
Computer B.
Step 8:
Find the AV Headphone service on Computer B.
i Double-click the Computer B device icon on Computer A. (Figure
15.7)
i Enter the Bluetooth passkey (if security is set to High on either
side) to start authentication.
i Once authentication is complete, the AV Headphone service is
found.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
105
IVT BlueSoleil™ User Manual
Figure 15.7: Double-click the Computer B device icon
Step 9:
Connect to Computer B.
; select Connect
i Right-click the AV Headphone service icon
on the pop-up menu. The connection will be established.
i If SBC Codec is set with higher priority, SBC Codec will be
selected for use.
i If mp3 Codec is set with higher priority and there is no
professional mp3 Codec installed on Computer A or Computer B.
BlueSoleil will select SBC Codec for use.
i If mp3 Codec is set with higher priority and there is professional
mp3 Codec installed on both computers. BlueSoleil will select
mp3 Codec for use.
Step 10:
All the audio media played on Computer A can be heard on
Computer B.
i Open music files (e.g. mp3, CD, rm etc.) with Windows Media
Player or RealOne Player or other media player and play them,
the music can be heard on Computer B. (Figure 15.3, Figure
15.4)
i When playing VCD or DVD on Computer A, the audio part can be
listened on Computer B.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
106
IVT BlueSoleil™ User Manual
16
Basic Imaging
16.1 Introduction
The Bluetooth BIP Profile defines six useful features: Image Push, Image Pull,
Advanced Image Printing, Automatic Archive, Remote Camera and Remote Display.
BlueSoleil™ support Image Push and Remote Camera now.
The BIP profile in BlueSoleil can be used in the following scenario:
i Push an image from a digital still camera.
i Control a digital still camera remotely.
Note: You can also use any device with a camera embedded instead of a digital still
camera.
16.2
Push an image from a digital still camera.
This section outlines how to push an image from a digital still camera B to computer
A.
Computer A
Digital Still Camera B
IVT BlueSoleil™
A Bluetooth Device
Step 1:
Insert the Bluetooth Device into computer A.
Step 2:
Start BlueSoleil™ on computer A.
Step 3:
i Make sure Basic Image service
Step 4:
is started on computer A.
i Power on camera B and Start Bluetooth function on camera B.
Step 5:
i Browse images in camera B and select the one you want to push.
From a context menu, select to send the image via Bluetooth.
Step 6:
i Generally, camera B will display a device list to let you choose to
which device you want to push the image; Select Computer A.
i If Computer A is not in the list, you need to start a new search.
Congratulations! The image has now been pushed to the computer successfully. You
can select where the received images are stored by selecting Properties… in the
context menu popped up on the Basic Image service icon.
Note: In some digital still camera, step 5 and step 6 may interchange each other.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
107
IVT BlueSoleil™ User Manual
Control a digital still camera1 remotely.
16.3
This section outlines how to control a digital still camera B via computer A.
Computer A
Digital Still Camera B
IVT BlueSoleil™
A Bluetooth Device
Step 1:
Insert the Bluetooth Device into computer A.
Step 2:
Start BlueSoleil™ on computer A.
Step 3:
Power on camera B.
Step 4:
Start remote camera function on camera B.
Step 5:
Search for camera B on computer A and connect to its BIP service
Step 6:
The Bluetooth Camera Controller dialog pops up; the image on the
camera’s LCD is displayed in this dialog. (Figure 16.1)
Figure 16.1 Computer A has connected to Camera B
The camera must have remote camera function.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
108
IVT BlueSoleil™ User Manual
Step 7:
Capture pictures:
1. Click “Capture” button on the dialog. BlueSoleil™ triggers the
shutter of the camera to capture the image.
2. A “Save As…” dialog pops up to let you select where to save the
image.
3. BlueSoleil™ gets the image from camera B. A progress bar in the
Bluetooth Camera Controller dialog shows how much the
process is finished. (Figure 16.2)
4. When the image is completely downloaded, it is displayed on the
computer’s screen.
Figure 16.2 BlueSoleil™ is getting the image
Step 8:
If you want to capture more pictures, just repeat step 7.
Step 9:
Click “Close” button on the dialog, BlueSoleil™ disconnects computer
A with camera B.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
109
IVT BlueSoleil™ User Manual
17
Connection Shortcut
17.1 Introduction
Connection shortcut profile is used to save time used in searching for devices and
browsing services. Once a connection has been established, it can be saved as a
shortcut. The shortcut is then used to re-establish the connection, without having
to search for the remote Bluetooth device and required Bluetooth service.
17.2 How to use Connection Shortcut
This section outlines how to save a Bluetooth File Transfer connection as a
connection shortcut.
Computer A:
Computer B:
Notebook, Laptop
Desktop
A Bluetooth Device
A Bluetooth Device
Windows 2000
Windows 2000
IVT BlueSoleil™
IVT BlueSoleil™
Step 1:
Establish a File Transfer connection. (See “Section 7.2 Transfer files
to/from a Computer”, Steps 1 to 7).
Step 2:
Save the Bluetooth File Transfer connection shortcut on Computer B.
i Right-click the Computer A device icon and select Save the
Connection as Shortcut | Bluetooth File Transfer. (Figure
17.1)
Figure 17.1: Save Bluetooth File Transfer as connection shortcut
Step 3:
Close BlueSoleil™ on Computer B by selecting File | Exit in the
BlueSoleil™ Main Window.
Step 4:
Re-start BlueSoleil™ on Computer B.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
110
IVT BlueSoleil™ User Manual
Step 5:
In the BlueSoleil™ Main Window, click Tools | My Shortcuts. The
Bluetooth Shortcuts window pops up. (Figure 17.2)
Figure 17.2: Bluetooth Shortcuts window
Step 6:
Check the Auto Start box and click Connect. (Figure 17.3)
Figure 17.3: Bluetooth Shortcuts
Step 7:
Once the connection is successfully established, click OK in the
Bluetooth Shortcuts window. (Figure 17.4)
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
111
IVT BlueSoleil™ User Manual
Figure 17.4: Click OK on Bluetooth Shortcuts
Step 8:
Start to use the FTP service provided by Computer A.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
112
IVT BlueSoleil™ User Manual
18
Bluetooth Glossary
Bluetooth Authentication
Bluetooth authentication is the procedure to verify
whether another Bluetooth enabled device has the right to access your computer.
During this procedure, a Bluetooth passkey is requested on both sides of the
connection. If the passkeys are the same, the authentication procedure is a
success and the connection can be setup. If the passkeys are different, then
authentication fails and a connection cannot be established.
Bluetooth Authorization
Bluetooth authorization is the procedure to verify
whether you are going to allow (authorize) other Bluetooth enabled devices to use
Bluetooth services on your Bluetooth enabled device. Every Bluetooth service in
your BlueSoleil™ has an authorization setting. The authorization devices list for
each service records the devices that have been authorized for that service. The
user can change the authorization status for each device.
Bluetooth Connection
A Bluetooth connection refers to the Bluetooth link that
can be set up between two Bluetooth devices. Connected Bluetooth devices have a
server/ client relationship. One Bluetooth device provides services and another
Bluetooth device uses these Bluetooth services.
Bluetooth Connection Shortcut
Connection shortcut is used to save time
used in searching for devices and browsing services. Once a connection has been
established, it can be saved as a shortcut. The shortcut is then used to re-establish
the connection, without having to search for the remote Bluetooth device and
required Bluetooth service.
Bluetooth Device
Bluetooth Devices can refer to either of the following:
(1) When referring to the local device configuration, a Bluetooth Device is the local
Bluetooth hardware, e.g. Device, UART device, PCMCIA card or BCSP device.
(2) When referring to the Bluetooth application, the Bluetooth device is the
Bluetooth system as a whole, e.g. a Bluetooth modem, Bluetooth mobiles or a
Bluetooth PDA. A computer together with the BlueSoleil™ and the Bluetooth dongle
would also be addressed as a remote Bluetooth device by other Bluetooth devices.
Bluetooth Device Address
A unique 48-bit address that distinguishes different
Bluetooth transceivers. Every Bluetooth device has a unique address so that other
devices can find it and communicate with it. The address appears in the form of
00:03:20:00:0D:0A.
Bluetooth Device Class
According to the Bluetooth standard, every Bluetooth
device is assigned a device type, which is represented in the Bluetooth device class.
The Bluetooth device class is three bytes in length in the form of 04:01:00. On the
computer side, the class may be Server, Desktop or Laptop. Users will be asked to
select it during first time set-up.
Bluetooth Device Inquiry To use Bluetooth, the user has to first find the
remote device. The searching procedure is called device inquiry. There are two
kinds of inquiry procedure; General Inquiry and Limited Inquiry. General Inquiry
will find all the Bluetooth devices in ‘general discoverable mode’ and ‘limited
discoverable mode’. Limited Inquiry will find only the devices in ‘limited
discoverable mode’.
Bluetooth Dial-up Networking This is the implementation of the Bluetooth
Dial-up Networking profile (DUN). Using DUN, Bluetooth devices can dial-up to the
Internet via a Bluetooth modem or a Bluetooth mobile phone.
Bluetooth FAX This is the implementation of the Bluetooth FAX profile (FAX).
Using FAX, Bluetooth devices can send a FAX via a Bluetooth mobile.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
113
IVT BlueSoleil™ User Manual
Bluetooth File Transfer This is the implementation of the Bluetooth File
Transfer profile (FTP). Bluetooth File Transfer enables the transfer files between
Bluetooth devices.
Bluetooth HCRP
This is the implementation of the Bluetooth Hardcopy Cable
Replacement profile (HCRP). HCRP provides services to replace the cables between
hosts and peripheral devices with a Bluetooth link. HCRP is mainly used for wireless
printing.
Bluetooth Information Synchronization This is the implementation of the
Bluetooth Synchronization profile (SYNC). Using Synchronization, Bluetooth
devices can synchronize messages, notes, calendars and cards with each other.
Bluetooth LAN Access This is the implementation of the Bluetooth LAN Access
profile (LAP). Using LAP, Bluetooth devices can access Local Area Network via LAN
access points.
Bluetooth Object Push This is the implementation of the Bluetooth Object Push
profile (OPP). Using OPP, Bluetooth devices can transfer messages, notes,
calendars and cards with each other.
Bluetooth Passkey In the Bluetooth authentication procedure, a Bluetooth
passkey is requested on both connection sides. The same Bluetooth passkey
should be input on both sides. If the passkeys are the same, the authentication
procedure is successful and connections can be setup. If the passkeys are different,
the connection and authentication will fail.
Bluetooth Peripheral Device This is the implementation of the Bluetooth
Human Interface Device profile (HID). By using HID, Bluetooth peripheral input
devices such as a Bluetooth mouse or keyboard, can remotely interface with the
host computer.
Bluetooth Personal Area Networking This is the implementation of the
Bluetooth Personal Area Networking profile (PAN). Using PAN, Bluetooth devices
can connect to each other to form ad-hoc networks. They can form a TCP/IP
network or connect to a Local Area Network and the Internet.
Bluetooth Printer This is the implementation of the Bluetooth Hard-copy Cable
Replacement profile (HCRP) as a printer. Bluetooth Printer allows Bluetooth devices
to wirelessly print documents to a Bluetooth printer.
Bluetooth Security Bluetooth security is an important part of the Bluetooth
wireless communication technology. Bluetooth security enables illegal access to
your computer to be rejected. There are three levels of security: Low, Medium and
High. In Low level, there is no security check. In Medium level, remote Bluetooth
devices can browse your services. Security is set on every service. The service can
be set to request or not to request for authentication and authorization. If you
request for authentication, the remote device will be asked to enter the same
passkey as the one in your computer. Otherwise, the Bluetooth passkey is not
requested. If authorization is set, the remote device has to be in the authorized
devices list.
Bluetooth Service A Bluetooth device may offer certain functions for other
Bluetooth devices to use. These functions are called Bluetooth services. For
example, a Bluetooth mobile phone can offer four services, which include
synchronization, dial-up networking, file transfer and serial port. In BlueSoleil™,
all services need to be started manually before use..
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
114
IVT BlueSoleil™ User Manual
Bluetooth Service Browse
A remote Bluetooth device can provide one or more
Bluetooth services. To use the services that the remote device provides, the user
has to first find the services. This is called service browse.
Bluetooth Serial Port This is the implementation of the Bluetooth Serial Port
profile (SPP). SPP emulates a serial port over Bluetooth, for the Bluetooth device.
Bonding Bonding is the creation of a relationship between two devices, which
are known to each other prior to the bonding procedure. A user initiates the
bonding procedure and enters a passkey to create a bond between two devices.
This differs from the authentication procedure where the user is requested to enter
a passkey during the establishment of the link.
Connectable
Bluetooth devices can be connectable or non-connectable. When
the device is connectable, other devices can connect to it.
DHCP The Dynamic Host Configuration Protocol (DHCP) is an Internet protocol
for automating the configuration of computers that use TCP/IP.
Bluetooth Dongle A Bluetooth device which can be added onto a computer or
notebook to make it Bluetooth enabled, A Bluetooth dongle is typically a USB
device.
General Discoverable
Bluetooth devices have three modes: General
discoverable, Limited discoverable and Non-discoverable mode. A Bluetooth device
will respond to a General Inquiry if it is in general discoverable or limited
discoverable mode.
HID
A Human Interface device such as a keyboard or mouse.
ICS (Internet Connection Sharing) For more detailed information about ICS,
please refer to the Microsoft Windows help topic: Internet Connection Sharing.
Limited Discoverable Bluetooth devices have three modes: General
discoverable, Limited discoverable and Non-discoverable mode. In Limited
discoverable mode, a Bluetooth device will only respond to a Limited Inquiry.
LAN A LAN is a Local Area Network.
LAN Access Point
One of entities defined in the LA profiles, the LAN Access
Point acts like a router between a Bluetooth piconet and an external network.
NAT Network Address Translation (NAT) is used to re-map IP numbers from one
range to another range of network addresses.
Non-Connectable
A Bluetooth devices can be connectable or non-connectable.
When it is non-connectable, other devices cannot connect to it. This is used in
BlueSoleil™ only when the user does not want another device to connect to their
computer.
Non-discoverable
Bluetooth devices have three modes: General discoverable,
Limited discoverable and Non-discoverable mode. In Non-discoverable mode, a
Bluetooth device will not respond to any inquiry, so another Bluetooth device will
not be able to find it.
Non-pairable
A Bluetooth device can be pairable or non-pairable. When it is
non-pairable, it will not accept a bonding request from other devices.
Pairable
A Bluetooth device can be pairable or non-pairable. When it is pairable,
it will accept a bonding request from other devices. After the bonding process is
finished successfully, two devices are paired. They now form a trusted relationship.
There is no need to exchange Bluetooth Passkeys the next time they connect.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
115
IVT BlueSoleil™ User Manual
Piconet
A collection of devices connected via Bluetooth wireless technology in
an ad hoc fashion. A piconet starts with two connected devices, such as a portable
PC and an Access Point, and may expand to eight connected devices. All Bluetooth
devices are peer units and have identical implementations. However, when
establishing a piconet, one unit will act as a master and the other(s) as slave(s) for
the duration of the piconet connection. All devices have the same physical channel
utilizing the same Frequency-hopping sequence, defined by the master device
clock and the Bluetooth Device Address.
PIM
Personal Information Management.
Radio Signal Strength Bluetooth operates on the 2.4G ISM band. The radio
signal is stronger when the remote device is closer or the remote device has a
higher radio output. The radio signal is weak when the remote device is distant or
the remote device has a weak radio output. The strength of the remote device's
radio signal affects the quality of the communication of the two Bluetooth devices.
When the radio signal is weak, the Bluetooth data transfer speed is slow. However,
if the two devices are too close and the radio signal is too strong, the Bluetooth
data transfer speed is also slow because the "sound" is too loud to "hear". The radio
signal strength is always referred to as RSSI in Bluetooth.
Remote Bluetooth Device
My Bluetooth device sees all other Bluetooth
enabled devices as remote Bluetooth devices. For example, a Bluetooth modem,
Bluetooth mobiles or a Bluetooth PDA .
Start Bluetooth Service
Start the selected Bluetooth service. Only after the
service is started, can other devices browse the service and connect to it.
Stop Bluetooth Service
Stop the selected Bluetooth service. After the service
is stopped, other devices cannot browse the service or connect to it. The existing
connection will be disconnected.
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
116
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause
undesired operation.
15.105 Federal Communications Commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications (including the antennas) made to this device that are not
expressly approved by the manufacturer may void the user's authority to operate the
equipment.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled environment. This device and its antenna must not
be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:09:07 06:07:14Z
Modify Date                     : 2005:09:07 15:20:18+08:00
Page Count                      : 55
Creation Date                   : 2005:09:07 06:07:14Z
Mod Date                        : 2005:09:07 15:20:18+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : amy.lee
Metadata Date                   : 2005:09:07 15:20:18+08:00
Creator                         : amy.lee
Title                           : BT-20S UserMan 2.pdf

EXIF Metadata provided by EXIF.tools