BUFFALO 000000019 LPV4-U2-300S User Manual LPV4 U2 300S

BUFFALO INC. LPV4-U2-300S LPV4 U2 300S

Users Manual

Print ServerLPV4-U2-300SUser Manualwww.buffalotech.com35020190-01
2ContentsChapter 1 - Configuration .................................................5Introduction .........................................................................................5Accessing Settings ...............................................................................6Access by IP Address .......................................................................................6Access from Network-USB Navigator ............................................................7Status ....................................................................................................9Device Status ...................................................................................................9System Status ................................................................................................10Wireless Status ..............................................................................................10Network ..............................................................................................11General Settings ...........................................................................................11TCP/IP .............................................................................................................12Wireless LAN Settings (Easy Setup) .............................................................13Wireless LAN Settings (Advanced Settings) ................................................14Wireless LAN Settings (WPS Settings) .........................................................15Security ...............................................................................................16Password Options .........................................................................................16Maintenance .......................................................................................17Restart ...........................................................................................................17Initialize .........................................................................................................17Firmware Update ..........................................................................................18Default Configuration Settings .........................................................19
3Chapter 2 - Network-USB Navigator ..............................20Introduction .......................................................................................20Install Network-USB Navigator .........................................................20For Windows Users ........................................................................................20For Mac Users ................................................................................................24Confirm Settings ...........................................................................................27Connect and Disconnect ....................................................................29How to Connect to Printer ............................................................................29How to Disconnect Printer ...........................................................................30Send Disconnect Request ..................................................................31Main Window ......................................................................................33Buttons ..........................................................................................................33Status .............................................................................................................34Options ...............................................................................................34How to Open Options ...................................................................................34Description ....................................................................................................35Notes ...................................................................................................37Chapter 3 - Settings .........................................................38Print Data from Your Mobile ..............................................................38Check Ink Level ...................................................................................38Use Scanning Function ......................................................................39Change Print Server’s IP Address ......................................................39Switch from Wired to Wireless Connection ......................................40Select Wireless Access Point from List .........................................................40
4Connect by WPS Pushbutton Method .........................................................42Connect by WPS PIN .....................................................................................43Switch from Wireless to Wired Connection ......................................44Initializing the Print Server ...............................................................45Press WPS Button ..........................................................................................45Configure in Settings ....................................................................................45Chapter 4 - Troubleshooting ...........................................46Cannot Print........................................................................................46Cannot Access Print Server from PC .................................................47Print Server Is Not Displayed on LPV4 Port Setup Wizard ..............48Print Server Is Not Displayed on Network-USB Navigator ..............50Cannot Find Access Point from Settings ..........................................51Cannot Connect Wirelessly Using WPS .............................................52Forgot IP Address ...............................................................................53How to Reconfigure the Printer Port ................................................55For Windows Users ........................................................................................55For Mac Users ................................................................................................58Cannot Configure Printer Port with LPV4 Port Setup Wizard .........61Appendix A - Supplemental Information ......................62Technical Specifications ....................................................................62FCC and IC Notice ...............................................................................63
5Chapter 1 - ConfigurationIntroductionConfiguration of the print server is done from Settings, the web-based configuration GUI.Note: Supported browsers include Internet Explorer 8 and later, Firefox 20 and later, and Safari 5 and later.
6Accessing SettingsAccess by IP AddressIf you know the IP address of the print server on your network, just type it in to the URL field of your browser and press the enter key to open Settings. If you don’t know the print servers IP address, refer to “Access from Network USB Navigator” below.1 Open a web browser.2 Enter the print server’s IP address in the address field and press the enter key.3 When the security window appears, enter “admin” for the username and “password” for the password, then click OK.
7Access from Network-USB NavigatorIf Network-USB Navigator has been installed on your PC, you use it to open Settings.Note: Refer to chapter 2 to install Network-USB Navigator.1 Open Network-USB Navigator.• For Windows 8, select Network-USB Navigator from the “Start” screen.• For Windows 7, Windows Vista, or Windows XP, navigate to Start - All Programs - BUFFALO - Network-USB - Network-USB Navigator.• For Mac OS, click the Network-USB Navigator icon in the dock.2 Select your printer and click (properties).Note: If multiple USB devices are displayed, select the “LPV4-U2-300S”.
83 Click Device Server Properties.4 Settings will open. When the security window appears, enter “admin” for the username and “password” for the password, then click OK.
9StatusDevice StatusView information for the device connected to the print server.Status - DevicePrinter Name Displays the name of the printer connected to the print server.Queue Name Displays the queue name for LPR printing.
10System StatusView system information for the print server.Status - SystemIP Address Displays the assigned IP address.Subnet Mask Displays the subnet mask.Default Gateway Displays the default gateway address.DHCP Server Displays the obtained DHCP server’s IP address.WINS Server Displays the WINS server’s IP address.Wireless StatusView wireless LAN interface information for the print server.Status - WirelessDisplays the signal strength.Current SSID Displays the current SSID.Current Channel Displays the current channel.Transfer Rate Displays the wireless transmission rate.
11NetworkGeneral SettingsConfigure the hostname and the connection method here.Network - GeneralHostnameEnter a name for the print server. This will be displayed in Network-USB Navigator and other software. This name should be unique within your network.The hostname may contain up to 15 alphanumeric characters and hyphens (-). A hyphen cannot be used for the first character.After changing the hostname, the printer port must be reconfigured. Refer to Chapter 4 for more details.Connection MethodSelect a connection method.AutoDetects the connection method automatically. If a LAN cable is attached to the print server, it uses a wired connection. Otherwise, the connection is wireless.WirelessThe print server works as a wireless device.WiredThe print server works as a wired device.
12TCP/IPConfigure print server’s network settings here.Network - TCP/IPNote: Only assign the print server a valid IP address, otherwise Settings cannot be accessed. If you cannot open Settings, initialize the print server, which restores all settings to their factory default values.DHCP If you’re using DHCP on your network, enable it here. If you don’t use DHCP, you’ll need to configure the print server’s IP address manually.IP Address If DHCP is not available on your network, you may configure the print server’s IP address manually here.Subnet Mask If DHCP is not available on your network, you may configure the print server’s subnet mask manually here.Default GatewayIf DHCP is not available on your network, you may configure the print server’s default gateway address here. If 0.0.0.0 is entered here, no default gateway is used.WINS Server You may enter a WINS server address here (optional). If DHCP is in use, the WINS server assigned by DHCP will override this setting.
13Wireless LAN Settings (Easy Setup)Configure wireless connection settings here.Network - Wireless LAN - Easy SetupWireless Network List Detected wireless devices are listed. Click Refresh List to search again.Up to 32 devices are displayed in order of strength of the signal.Encryption Key Enter the encryption key of the selected wireless device.Apply Click this button to apply settings and reboot the print server.
14Wireless LAN Settings (Advanced Settings)Configure advanced wireless settings here.Network - Wireless LAN - Advanced SettingsSSIDEnter the SSID of the access point that you want to connect to.SSIDs may contain up to 32 alphanumeric characters, hyphens (-), and underscores (_).Network AuthenticationSelect the same authentication method that your wireless router or access point uses.Open (No Authentication)Choose this if your network uses no authentication or WEP.WPAWPA uses PSK authentication, TKIP or AES encryption, and a pre-shared key.WPA2WPA2 uses PSK, AES encryption, and a pre-shared key. WEP SettingsWEP Select whether to enable or disable WEP encryption.Key Index Select the number of the WEP key you want to use (1 - 4). This WEP key should be same as the one your access point is configured with.
15WEP Key 1WEP Key 2WEP Key 3WEP Key 4Up to 4 WEP keys can be configured. Alphanumeric or hexadecimal WEP keys of either 64-bit or 128-bit lengths are supported.WPA/WPA2 SettingsEncryption MethodSelect the encryption method for WPA authentication (TKIP or AES). This setting should match that of the access point.Note: Usually, AES is safer than TKIP. Always use AES for your wireless network if it is supported by your devices.Pre-shared KeyEnter the pre-shared key. This is needed when TKIP or AES is used for encryption. Use the same key that your access point and other wireless devices are using. Use 8 - 63 alphanumeric or hexadecimal characters. Wireless LAN Settings (WPS Settings)Configure WPS here.Network - Wireless LAN - WPS SettingsPINDisplays PIN for WPS connection. Click Generate PIN to generate new PIN.To connect to the access point, click Execute WPS and enter the PIN to the access point within 2 minutes.
16SecurityPassword OptionsConfigure print server’s password here.Security - PasswordNew PasswordThe administrator password may contain up to 8 alphanumeric characters and underscores (_).This password is used for logging into Settings.Confirm Enter the password again for confirmation.
17MaintenanceRestartRestart the print server.Maintenance - RestartRestart Click Yes to restart the print server. All current connections to the print server will be disconnected.InitializeInitialize the print server.Maintenance - InitializeInitialize Click Yes to restore all settings to their factory default values.
18Firmware UpdateUpdate the print server’s firmware.Maintenance - Firmware UpdateNote: Do not turn the power off until update is finished! When the power LED stops blinking and glows steadily, it is safe to turn off the power.Firmware File Click Browse and choose the firmware file. Click Update to start updating.
19Default Configuration SettingsFeature Parameter Default SettingGeneral SettingsUsername adminPassword passwordHostnameLPV4-U2-XXXXXX(Where “XXXXXX” is the last 6 digits of the print server’s MAC address)Connection Method AutoTCP/IP SettingsDHCP EnabledIP Address 0.0.0.0Subnet Mask 0.0.0.0Default Gateway 0.0.0.0WINS Server 0.0.0.0Wireless LAN SettingsSSID NoneNetwork Authentication OpenWEP OffKey Index 1WEP Key NonePIN An 8-digit random value
20Chapter 2 - Network-USB NavigatorIntroductionNetwork-USB Navigator lets you connect a multifunctional printer and use functions such as scanning, ink levels, etc. You can also directly access Settings from the application.Note: While a printer is accessed through Network-USB Navigator, it cannot be used by anyone else. Disconnect the printer after using the application.Install Network-USB NavigatorFor Windows UsersFollow the procedure below to install the application.1 Access “d.buffalo.jp/lpv4-u2-300s/” and download LPV4-U2-300S Utility.2 Run the utility.
213 Click Network-USB Navigator.4 If “User Account Control” is displayed, click Yes or Continue.5 Read the user license agreement and click Yes to agree.
226 Click Next.7 Click Start.8 If “Would you like to install this device software?” is displayed, check Always trust software from “BUFFALO INC.”. and click Install.
239 Click Yes.10 Select Manual Connection and click Next.11 Click Finish.You have installed Network-USB Navigator. Next, go to “Confirm Settings”.
24For Mac UsersFollow the procedure below to install the application.Note: The examples in this chapter show OS X 10.8. Your operating system might be slightly different.1 Access “d.buffalo.jp/lpv4-u2-300s/” and download the LPV4-U2-300S utility.2 Run the utility and click Network-USB Navigator.3 Click Continue.4 Read the software license agreement and click Continue.
255 Click Agree to accept the software license agreement.6 Click Install.7 Enter your name and password, then click Install Software.8 Click Continue Installation.
269 Click Restart.10 After rebooting, select Manual Connection and click OK.You have installed Network-USB Navigator. Next, go to “Confirm Settings”.
27Confirm SettingsUse the following procedure to make sure that Network-USB Navigator is configured correctly.Note: The examples here show Windows screens, but the procedure for Mac OS is the same.1 Open Network-USB Navigator.• For Windows 8, select Network-USB Navigator from the Start screen.• For Windows 7, Windows Vista and Windows XP, navigate to Start - All Programs - BUFFALO - Network-USB - Net-work-USB Navigator.• For Mac OS, click the Network-USB Navigator icon in the dock.2 Select your printer and click (properties).Note: If multiple USB devices are displayed, select the LPV4-U2-300S.
283 Click Connect tab, confirm that Enable auto connect is not checked, and click Apply.Note: If Enable auto connect is checked, uncheck it.4 Click OK and close the application.You have finished confirming settings.
29Connect and DisconnectConnect to or disconnect your printer with Network-USB Navigator.How to Connect to Printer1 Open Network-USB Navigator.• For Windows 8, select Network-USB Navigator from the Start screen.• For Windows 7, Windows Vista and Windows XP, navigate to Start - All Programs - BUFFALO - Network-USB - Net-work-USB Navigator.• For Mac OS, click the Network-USB Navigator icon in the dock.2 Select your printer and click (connect).Note: • If multiple USB devices are displayed, select the LPV4-U2-300S.• If the printer driver installer is displayed, install the driver referring to the manual from your printer.
303 Confirm that You are connected is displayed.How to Disconnect Printer1 Open Network-USB Navigator.• For Windows 8, select Network-USB Navigator from the Start screen.• For Windows 7, Windows Vista and Windows XP, navigate to Start - All Programs - BUFFALO - Network-USB - Net-work-USB Navigator.• For Mac OS, click the Network-USB Navigator icon in the dock.2 Select your printer and click (disconnect).Note: If multiple USB devices are displayed, select the LPV4-U2-300S.
313 Confirm that Available is displayed.Send Disconnect RequestYou can send a disconnection request to the user who is using the printer.1 Open Network-USB Navigator.• For Windows 8, select Network-USB Navigator from the Start screen.• For Windows 7, Windows Vista and Windows XP, navigate to Start - All Programs - BUFFALO - Network-USB - Net-work-USB Navigator.• For Mac OS, click the Network-USB Navigator icon in the dock.2 Select your printer and click (disconnect request).Note: If multiple USB devices are displayed, select the LPV4-U2-300S.
323 The disconnect request is sent to the user who is using the printer.4 The window below appears on the desktop of the user who received the request. When the user clicks Yes, the printer will then be available for your use.
33Main WindowButtonsRefreshes the screen.Changes the view of the list.Opens options.Opens help menu.Displays the properties of the selected device.Sends disconnect request to the user who is using the selected device.Connects to the selected device.Disconnects the selected device.
34StatusAvailable You can use the printer.You are connected You are connected to the printer.In use Another user is connected to the printer or the printer is printing.OptionsHow to Open Options1 Open Network-USB Navigator.• For Windows 8, select Network-USB Navigator from the Start screen.• For Windows 7, Windows Vista and Windows XP, navigate to Start - All Programs - BUFFALO - Network-USB - Net-work-USB Navigator.• For Mac OS, click the Network-USB Navigator icon in the dock.2 Click (options).3 Options is displayed.
35DescriptionGeneralLaunch Network-USB Navigator at Windows startup Check to launch Network-USB Navigator at Windows startup.Don’t show Network-USB Navigator main window on program launchCheck to launch Network-USB Navigator minimized.Show a balloon notification when an error occursCheck to show a help balloon when Network-USB experiences a power surge or a USB device is not correctly disconnected.Show a confirmation message when disconnecting USB devicesCheck to show a disconnect confirmation prompt before disconnecting a USB device. A disconnect prompt is not shown when an application or the automatic printing feature initiates the disconnect.Automatically connect newly discovered USB devices. Check to automatically connect USB devices detected for the first time.
36Search for Device ServersEnable broadcast addressesYou do not need to enable for normal use.If your PC is connected to multiple networks, enter the broadcast address of the network which the print server is connected to.DisplayList Display Set the display order and which items to show and hide in the USB device list. Checked items will be shown. Use Up or Down to change the selection order.
37Notes• Do not connect a USB hub to the print server. It may not work correctly.• Devices are not automatically reconnected when resuming from standby or hibernation. Use Network-USB Navigator to reconnect them.• Operation or configuration via Telnet is not supported.• Do not disconnect or eject USB devices while they are being accessed.• If your USB device doesn’t automatically connect after detection, connect the device manually.• If your USB device requires an AC adapter, be sure to connect it.• For the latest information and updates, go to our website.
38Chapter 3 - SettingsYou can configure various settings of the print server.Print Data from Your MobileYou can use the ePrint app, available for iOS and Android, to print pictures or contact files directly from your mobile device. Refer to the following links for more information on ePrint.Overview and procedure:http://www.e-workshop-dev.com/PC_EN/eprint_e.htmlSupport for ePrint:http://www.e-workshop-dev.com/PC_EN/inquiry_title_e.htmlePrint for iPad, iPhone, and iPod touch:https://itunes.apple.com/en/app/eprint-free/id304220730?mt=8ePrint for Android:https://play.google.com/store/apps/details?id=jp.co.microtech.android.eprint_free&hl=enCheck Ink LevelFollow the procedure below to check your printer’s ink level.1 Open Network-USB Navigator and connect to your printer.2 Use your printer’s included utilities to check the ink level. You may disconnect the printer afterwards.
39Use Scanning FunctionFollow the procedure below to use the printer’s scanning function. The printer’s driver may be required. For more information, refer to your printer’s manual.1 Open Network-USB Navigator and connect to your printer.2 Use the printer’s scanning function. You may disconnect the printer afterwards.Change Print Server’s IP AddressFollow the procedure below to change the print server’s IP address.1 Open print server Settings and log in.2 Navigate to Network - TCP/IP.3 Disable DHCP and manually configure the IP address, subnet mask, and default gateway; click Apply when finished.
40Refer to the example below (if network is on 192.168.11.0).DHCP - DisabledIP address - 192.168.11.222Subnet mask - 255.255.255.0Default gateway - 192.168.11.1WINS server - 0.0.0.0Note: Only assign the print server a valid IP address, otherwise Settings cannot be accessed. If you cannot open Settings, initialize the print server, which restores all settings to factory default.4 When “Restart the print server to save the settings. Restart now?” is displayed, click OK.Switch from Wired to Wireless ConnectionFollow the procedure below to switch wired connection to wireless connection.There are 2 ways to do it: selecting from the wireless network list, or PIN method.Notes:• Wired connection and wireless connection cannot be used at the same time.• WPA2-PSK (TKIP) is not supported.Select Wireless Access Point from ListBefore starting, the print server’s connection method should be set to ‘Auto’. The access point should also have SSID broadcast enabled and is not using WPA2-PSK (TKIP) encryption. Refer to Chapter 4 for more information.1 Open print server Settings and log in.2 Navigate to Network - Wireless LAN.
413 Select an access point; enter the encryption key and click Apply.4 The settings are saved and the print server is rebooted.5 Disconnect the Ethernet cable from the print server.6 Disconnect the AC adapter, wait for about 10 seconds, then reconnect the AC adapter.7 After about 30 seconds, check the LEDs on the side of the print server.Note: If the wireless LED is blinking, the connection could not be established. Check the access point’s encryption key and try again.
42Connect by WPS Pushbutton MethodBefore starting, the print server’s connection method should be set to ‘Auto’.1 Disconnect the Ethernet cable from the print server.2 Disconnect the AC adapter, wait for about 10 seconds, then reconnect the AC adapter.3 Wait for about 30 seconds. Then, press and hold the WPS button for about 5 seconds.4 Press access point’s AOSS or WPS button to start WPS.Note: If you are using Buffalo router, press and hold the AOSS button for at least two seconds to start WPS. This may be different for other routers.5 Check the LEDs on the side of the print server.Note: If the wireless LED is blinking, the connection could not be established. Try again from step 3.
43Connect by WPS PINBefore starting, check that the connection method is auto.1 Before starting, the print server’s connection method should be set to ‘Auto’. The target access point should have its WPS screen open.2 Navigate to Network - Wireless LAN - WPS Settings.3 Note the displayed PIN, then click Execute WPS.4 Within 2 minutes, register the PIN with the target access point.5 Confirm that “WPS Success” is displayed. If the following window is not displayed, the connection could not be established. Try again.6 Disconnect the Ethernet cable from the print server.7 Disconnect the AC adapter, wait for about 10 seconds, then reconnect the AC adapter.
448 Wait for about 30 seconds, then check the LEDs on the side of the print server.Switch from Wireless to Wired ConnectionFollow the procedure below to switch wireless connection to wired connection. The print server cannot use both wired and wireless connection at the same time.Before starting, check that the connection method is ‘Auto’.1 Disconnect the AC adapter from the print server.2 Connect the print server to the router or hub with an Ethernet cable.3 Connect the AC adapter to the print server.4 Wait for about 30 seconds, then check the LEDs on the side of the print server.
45Initializing the Print ServerYou can initialize the print server by holding down the WPS button, or from within Settings.Press WPS Button1 Disconnect the AC adapter from the print server.2 Reconnect the AC adapter to the print server while holding down the WPS button.Hold down the WPS button until the power LED blinks green.Configure in Settings1 Open print server Settings and log in.2 Navigate to Maintenance - Initialize.3 Click Yes.4 When “Restore all settings to their factory default settings?” is displayed, click Yes.
46Chapter 4 - TroubleshootingCannot PrintCase 1: Printer is not ready.Confirm that the printer’s power is on, and there is enough ink and paper.Case 2: Print server is not connected correctly.Check the LEDs on the side of the print server. If it is connected correctly, the LEDs will be lit as shown below.For wired connection:For wireless connection:Note: If the LAN LED is not lit while an Ethernet cable is connected, check the router and its connection.
47Case 3: Connected to the printer using Network-USB Navigator.If the printer is connected to Network-USB Navigator, you cannot print. Disconnect the printer from Network-USB Navigator. Also, confirm that automatic connection is disabled.Case 4: Hostname has been changed.If you changed the print server’s hostname, you have to reconfigure the printer port. Refer to the “How to Reconfigure Printer Port” section.Cannot Access Print Server from PCCase 1: Print server is not connected correctly.Check the LEDs on the side of the print server. If it is connected correctly, LED is as the following.For wired connection:For wireless connection:Note: If the LAN LED is not lit while an Ethernet cable is connected, check the router and its connection.
48Case 2: The IP address is invalid.If print server was assigned an invalid IP address, Settings cannot be accessed. If you cannot open Settings, initialize the print server, which restores all settings to their factory default values.Print Server Is Not Displayed on LPV4 Port Setup WizardCase 1: The IP address is invalid.If you set the print server’s IP address improperly (such as broadcast address), you cannot access Settings. If you cannot access Settings, initialize the print server. Note that initialization will restore all settings of the print server to the factory default.Case 2: Print server is not connected correctly.Check the LEDs on the side of the print server. If it is connected correctly, LED is as the following.For wired connection:For wireless connection:Note: If the LAN LED is not lit while an Ethernet cable is connected, check the router and its connection.
49Case 3: Using a PC with multiple network interfaces.Open LPV4 Port Setup Wizard and navigate to Search for Print Server... - Configure.... Add the broadcast addresses of the network that the print server is connected to.
50Print Server Is Not Displayed on Network-USB NavigatorCase 1: The IP address is invalid.If print server was assigned an invalid IP address, Settings cannot be accessed. If you cannot open Settings, initialize the print server, which restores all settings to factory default.Case 2: Print server is not connected correctly.Check the LEDs on the side of the print server. If it is connected correctly, LED is as the following.For wired connection:For wireless connection:Note: If the LAN LED is not lit while an Ethernet cable is connected, check the router and its connection.
51Case 3: Using a PC with multiple network interfaces.Open Network-USB Navigator and options menu. Click Search for Device Servers tab and check Enable broadcast addresses, then add broadcast addresses of the network that the print server is connected to.Cannot Find Access Point from SettingsCase 1: The access point is turned off.Confirm that the access point is turned on.Case 2: The access point has SSID broadcasting disabled.You will never find the access point if it disables broadcasting SSID. Navigate to Network - Wireless LAN - Advanced Settings and configure manually.Case 3: The access point sets the authentication method as WPA2-PSK (TKIP).WPA2-PSK (TKIP) is not supported.
52Cannot Connect Wirelessly Using WPSCase 1: The access point is using WEP encryption.If the encryption method is set to WEP, you cannot use WPS to connect to the access point. Navigate to Network - Wireless LAN - Advanced Settings and configure manually.Case 2: The access point has SSID broadcasting disabled.You will never find the access point if it disables broadcasting SSID. Navigate to Network - Wireless LAN - Advanced Settings and configure manually.Case 3: The access point is using WPA2-PSK (TKIP) authentication.WPA2-PSK (TKIP) is not supported.
53Forgot IP AddressYou can check the print server’s IP address by using Network-USB Navigator.1 Open Network-USB Navigator.• For Windows 8, select Network-USB Navigator from the Start screen.• For Windows 7, Windows Vista and Windows XP, navigate to Start - All Programs - BUFFALO - Network-USB - Net-work-USB Navigator.• For Mac OS, click the Network-USB Navigator icon in the dock.2 Select your printer and click (properties).Note: If multiple USB devices are displayed, select the LPV4-U2-300S.
543 The print server’s IP address is displayed in “IP Address”.
55How to Reconfigure the Printer PortFollow the procedure below to reconfigure the printer port. The procedure is different between Windows and Mac OS.For Windows Users1 Open the LPV4 Port Setup Wizard.For Windows 8, Select LPV4 Port Setup Wizard in “Start” screen.For Windows 7, Windows Vista, or Windows XP, Navigate to Start - All Programs - BUFFALO - LPV4 Print - LPV4 Port Setup Wizard.2 Click Next.3 Select Print with LPR (Line Printer Remote) and click Next.Note: Some printers may not support raw mode.
564 Click Search for Print Server....5 Select the print server and click OK.Note: If multiple print servers are displayed, confirm the MAC address or device name.6 Click Next.
577 Click Next.Note: If “The printer port xxxxxxxxxxxxxxxxx already exists.” is displayed, cancel the configuration and refer to the “Cannot Configure Printer Port with LPV4 Port Setup Wizard” section.8 Click Register.9 Select the printer connected to the print server, then click Next.
5810 Click Register.Now the printer is ready to be used.For Mac Users1 Navigate to System Preferences in Apple menu.2 Click Print & Fax.3 Click + and select Add Printer or Scanner....Note: If the screen from step 4 appears when you click + , follow step 4.
594 Select the print server (its suffix is “-prm1”), then select Select Printer Software... from “Use”.Note: If your print server is not listed, confirm that it is connected correctly and try again. If you find multiple print servers, check your print server’s MAC address.5 Select your printer and click OK.
606 Click Add.7 Confirm that your printer is displayed.Now the printer is ready to be used.
61Cannot Configure Printer Port with LPV4 Port Setup WizardIf the same port name is already registered, “The printer port xxxxxxxxxxxxxxxxx already exists.” may be displayed when registering the printer port.In this case, follow the procedure below to delete unnecessary printer port settings.1 Navigate to Control Panel - Devices and Printers, then open properties of your printer.2 Click Ports tab.3 Select an unnecessary port and click Delete Port.Note: The port which is currently used is displayed as “LPV4 Print LPR Port” in “Description” and checked. You can delete ports that are not checked.
62Appendix A - Supplemental InformationTechnical SpecificationsWireless LAN InterfaceStandard Compliance IEEE 802.11n / IEEE 802.11g / IEEE 802.11bTransmission Method Direct sequence spread spectrum (DSSS), OFDM, MIMOFrequency Range Available frequencies depend on the country of purchase.Transmission RateIEEE 802.11n: up to 300 MbpsIEEE 802.11g: up to 54 MbpsIEEE 802.11b: up to 11 MbpsAccess Mode Infrastructure ModeSecurity WPA2-PSK (AES), WPA-PSK (TKIP/AES), 64-bit or 128-bit WEPWired LAN InterfaceStandard Compliance IEEE 802.3u (100BASE-TX) / IEEE 802.3 (10BASE-T)Transmission Rate 10 Mbps or 100 MbpsTransmission Encoding 100BASE-TX 4B5B/MLT-3, 10BASE-T Manchester CodingAccess Method CSMA/CDSpeed and Flow Control 10 Mbps or 100 Mbps, Auto Sensing, Auto MDIXOther SpecificationsPrinter Interface 1 USB 2.0/1.1 portPower Supply External AC 100-240 V Universal, 50/60 HzPower Consumption About 2.3 W (Max)Dimensions 72 x 127 x 25 mm (2.83 x 5 x 0.98 in.)Weight 100 g (3.53 oz.)Operating Environment 0 - 40° C (32 - 104° F), 10 - 85% (non-condensing)Compatible OSTCP/IP (TCP#9100, LPR)Windows 8 (64-bit/32-bit), Windows 7 (64-bit/32-bit, SP1 or later), Windows Vista (64-bit/32-bit, SP2 or later), Windows XP (32-bit, SP3 or later), Mac OS (10.5, 10.6, 10.7, 10.8, Intel CPU only) BonjourMac OS (10.5, 10.6, 10.7, 10.8, Intel CPU only) Compatible PrintersUSB 2.0 or 1.1 PrintersOnly 1 printer can connect to the print server at a time. Interactive communication-only printers, WPS (Windows Printing System) printers, or GDI printers are not supported.
63FCC and IC NoticeFCC Part 15.19This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Part.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.FCC Part.15.21You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
64FCC RF Exposure WarningThis device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.RSS102 2.6 Radiation Exposure Statement Déclaration d’exposition aux radiationsThis equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Navigation menu