BUFFALO 000000027 MiniStation User Manual HD PZNU3

BUFFALO INC. MiniStation HD PZNU3

(Short-Term Confidential) User Manual

HD-PZNU3User Manualwww.buffalotech.com35020740-012015.2
1ContentsLEDs and Connections ....................................................2Specifications ..................................................................3Software Installation ......................................................3Recommended Usage ....................................................4Warning.............................................................................................4Dismounting the Unit ......................................................................5Troubleshooting ...............................................................................6I can see the MiniStation in Computer (PC) but I cannot access it .........6I cannot see the MiniStation ..................................................................... 6My backup program cannot save files to the MiniStation ...................... 6Regulatory Compliance Information ............................7Company Information .....................................................................7FCC Statement ..................................................................................7IC statement (IC déclaration) ...........................................................8
2LEDs and Connections1 Power/Access LEDPower On : whiteAccessing : blinking whiteWhen HD-PZNU3 Is In an Encryption ModeLocked : Orange2 USB Cable3 USB Connector
3SpecificationsCheck Buffalo's website (www.buffalotech.com) for information about the latest products or compatible models.Interface USB 3.0Connector USB 3.0 Micro-BTransfer speed 5 Gbps Maximum (USB 3.0) *External dimensions 90 x 141 x 21 mm; 3.5" x 55.5" x 0.8" (excluding protruding parts)Power 5 V ± 5%Compatible OSWindows 8.1 (64-bit or 32-bit)Windows RT 8.1 **Windows 8 (64-bit or 32-bit)Windows RT **Windows 7 (64-bit or 32-bit)Windows Vista (64-bit or 32-bit)OS X 10.10, 10.9, 10.8 ***Connect the MiniStation to a USB 3.0 port for best transfer speeds. The MiniStation will function when connected to a USB 2.0 or USB 1.1 port, but data transfers will be slower.**Only basic external hard drive functionality is supported with these operating systems; Mode Changer can work with them, but other utilities from our website may not.Software InstallationThe optional software, and the manuals for them are available from the download page below.Note: The optional software is not available for Windows RT 8.1, Windows RT, and Mac.http://d.buffalo.jp/hd-pznu3/
4Recommended UsageWarningTo avoid damage to data, never do any of the following while data is being accessed:- unplug the cables- turn off your computer- put your computer into standby, hibernate, or sleep modeNever configure this unit as a destination for virtual memory.The maximum size of a file on a FAT32 drive is 4 GB. To work with larger files, reformat the drive with NTFS or Mac OS extended.Some computers may not recognize this device at boot. If this happens, unplug the cable, then plug it again after a few seconds.This unit supports hot-plugging.You can plug or unplug the USB cable while the unit and your PC are on. However, never unplug the cable while the data is being accessed. If you unplug the unit while the data is being accessed, your data may be damaged or lost.Never put anything on top of the MiniStation. It may cause the unit to malfunction.If the unit is connected to a USB 2.0 or 1.1 plug, Windows will display a message that a high-speed USB device is connected to a non high-speed USB hub. Move the unit to a USB 3.0 port for best performance, or click [X] to continue.You may hear some noise while the unit is working, especially while it's booting or being accessed. This is normal.Do not boot your operating system from this unit.The first time you connect this unit, it may take about 20 seconds before the power/access LED turns on.If you use this unit with multiple partitions, format each partition before use.If your Windows computer will not boot while this unit is connected, then connect the unit to your computer after rebooting Windows. Also, refer to your computer's manual to change the BIOS setting to boot from an internal hard drive if you want to turn your computer on or off while this unit is connected.
5Some computers may display a delayed write when they return from an energy-saving state. If this happens, unplug the unit before putting your computer into the energy-saving mode.This drive may become hot during use.This unit is designed to release heat through its case. The surface of the case may become quite hot in normal use. Even when the unit is off, the case may still be warm from standby current.If the power/access LED does not turn off when you turn off your computer, unplug the USB cable from the drive.Some computers do not support power saving mode.Before using this unit with a Mac, reformat it with Mac OS extended using the disk utility in Mac OS.Dismounting the UnitUnplugging the unit incorrectly can corrupt data. Please be careful! If your computer is turned off, then it is always safe to unplug the unit. If your computer is turned on, please follow the procedure below to unplug the unit.For Windows1 Click the icon or in the system tray.2 When the menu opens, click the device name.3 A message that indicates you can safely remove the unit will appear. For Mac1 Drag this unit's icon to the trash to dismount the drive. Or, click the dismount icon in the sidebar of the Finder to dismount the drive.2 It's now safe to unplug the unit from your Mac.
6TroubleshootingI can see the MiniStation in Computer (PC) but I cannot access itThe drive may require formatting. Try using DiskFormatter2. Diskformatter2 and the manual are available from http://d.buffalo.jp/hd-pznu3/.I cannot see the MiniStationVerify that the power LED is on. If it is not, check the cable! The MiniStation should be connected to your computer by a USB cable. Check that both ends are correctly plugged in.Verify that the hard drive inside the MiniStation is spinning. This can be verified by placing your hand on the side of the case and feeling for a slight vibration.Also, after the MiniStation has been powered on for 15 minutes or more it will begin to get warm. If neither of the proceeding tests verified that the hard drive is spinning, then please contact technical support for further assistance.My backup program cannot save files to the MiniStationReformat your MiniStation with NTFS or Mac OS Extended. FAT32 is limited to 4 GB file sizes.
7Regulatory Compliance InformationThe information below is only for US and Canada region.Only use the cables and accessories that are included in the package. Don't use other accessories or cables unless specifically instructed to in the documentation.Company InformationBuffalo Americas, Inc.11100 Metric Boulevard suite 750 Austin Texas 78758+1-512-349-1500FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
8IC statement (IC déclaration)This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu