BUFFALO 09101746-0 AirStation Compact Flash 802.11b Adapter User Manual Part 2

BUFFALO INC. AirStation Compact Flash 802.11b Adapter Part 2

Contents

Part 2

3Windows Me/98WLI2-CF-S11 User's Manual 69WLI-CF-S11G.book 69 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 70WLI-CF-S11G.book 70 ページ ２００２年２月２７日　水曜日　午後９時１０分
3Windows Me/98WLI2-CF-S11 User's Manual 71WLI-CF-S11G.book 71 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 72WLI-CF-S11G.book 72 ページ ２００２年２月２７日　水曜日　午後９時１０分
3Windows Me/98WLI2-CF-S11 User's Manual 73WLI-CF-S11G.book 73 ページ ２００２年２月２７日　水曜日　午後９時１０分
MEMOWLI2-CF-S11 User's Manual 74WLI-CF-S11G.book 74 ページ ２００２年２月２７日　水曜日　午後９時１０分
■Overview Chapter 4Capter 4Windows2000 SettingsThis chapter describes how to make thesettings for connecting your Windows2000 computer to a wireless LAN.4.1 Making the Wireless LAN Card Available Step 1 Before installing the wireless LAN card ...78pageStep 2 Installing the wireless LAN card ................83pageStep 3 Installing the wireless LAN carddrivers ..........................................................85pageStep 4 Confirming that the installed wirelessLAN card is normally operating ...................88page4.2 Preparing for Connecting to the Network Step 5 Making the network settings ......................91pageStep 6 Installing Client Manager ...........................91page4.3 Connecting to the Network Step 7 -a Communicating via AirStation ..............95pageStep 7 -bCommunicating with wirelessLAN computers ..........................................97pageStep 8 Starting communication .............................99pageWLI-CF-S11G.book 75 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 76Follow the procedure in the illustration below to connect your Windows2000 computer to a wireless LAN.Windows2000 Operation FlowMaking the wireless LAN card availablePreparing for connecting to the networkConnecting to the networkCheck the configuration of the drives on your Windows computer and confirm that its PC card driver operates normally.Install the wireless LAN card in the Windows computer.Make the settings for connecting the Windows computer to the network.Step 1 Step 2Step 7Step 5Make the settings for access to the network.a...AirStationb...Wireless LAN computers-a, b（from page 78）（from page 91）（from page 95）WLI-CF-S11G.book 76 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 77Install the wireless LAN card drivers in the Windows com-puter.Confirm that the in-stalled wireless LAN card operates nor-mally.Communicate with other computers on the network.Install Client Man-ager for communi-cating with other wireless LAN com-puters.Step 3 Step 4Step 8Step 6To make the Air-Station settings, refer to the AirSta-tion manual.WLI-CF-S11G.book 77 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 784.1 Making the Wireless LAN Card AvailableInstall the wireless LAN card to connect your Windows 2000 computer to awireless LAN.Step 1 Before installing the wireless LAN cardChecking the configuration of your drivesFollow the procedure below to check the configuration of the drivers onyour Windows computer in which the wireless LAN card will be installed.1Turn on the computer to boot Windows 2000. Log in with the log-in name having the administrator authority (Administrator, etc.).2Double-click [My Computer] on Desktop.3These displayed drive names will be necessary in thesubsequent procedures. Be sure to take note of these drivenames in the table on the upper right of the next page.Select [View]-[Detail].Check the drive names listed inthe window.WLI-CF-S11G.book 78 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 79Drive names on your computerChecking the PC card driverFollow the procedure below to verify that the PC card driver on thecomputer in which the wireless LAN card will be installed is operatingnormally.1Right-click [My Computer] on Desktop.Click [Properties].2Click [Hardware]-[Device Manager].3Click the "+" mark on the left of [PCMCIA adapters].4The displayed PCMCIA controller name varies with thecomputer model.⇒ Continued on next pageDrive Type Icon Drive Name (e.g.)3.5" FDD （A:）HDD (local disk) （C:）CD-ROM （D:）Confirm that the "x" markis not indicated for theicon under [PCMCIAadapters].WLI-CF-S11G.book 79 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 80If such an error mark as "!" or "x" is not indicated, the PC card driver isoperating normally.If the icon displayed under [PCMCIA adapters] appears withthe ! or x mark, refer to the manual included in the computerand activate the PC card driver.Checking the browser settings (only for using the AirStation)When you use the AirStation, invalidate the dial-up settings and proxysettings under the browser settings.The following procedure uses Internet Explorer 5.0 or later for example.1Select [Start]-[Settings]-[Control Panel].2Double-click [Internet Option].3Double-click the [Connections] tab.4When the provider informationis listed in the [Dial-upsettings] area, click the ○mark on the left side of [Neverdial a connection] below thearea to put a dot mark.Click [LAN setings] in the"Local Area Network(LAN)settings" area.WLI-CF-S11G.book 80 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 815Confirm the items with a checkmark.For memorandum, put a checkmark for the same items below.□ Automatically detect settings□ Use automatic configuration script□ Use a proxy server□ Bypass proxy server for local addresses6Upon completion of confirming the items with the checkmark,remove the checkmark from all the items.Checking the network adapterConfirm the current settings of the network function.1Select [Start]-[Settings]-[Control Panel].2Double-click [System].3Click [Hardware]-[Device Manager].4Click the "+" mark on the left side of [Network adapters], showing thecurrent adapter as listed in the illustration.⇒ Continued on next pageWLI-CF-S11G.book 81 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 825Disable a LAN board or card if any name.If there is no LAN board or card name listed, proceed to Step 6.6If any name beginning with "AOL" is found under [DeviceManager]-[Network adapters], disable it in the same manner asStep 5.7Click [OK] to close the [Device Manager].If you have disabled any driver in Steps 5 and/or 6, restartthe computer.Select "Do not use thisdevice(disable)."Click [OK].WLI-CF-S11G.book 82 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 83Step 2 Installing the wireless LAN cardThe wireless LAN card can be installed/removed in/from the computerwhich is in the ON state.If your computer is equipped with a power managementfunction that automatically cuts power supply to thecomputer when it is left idle for a certain period, turn thefunction off. The wireless LAN card may be disabled if thepower management function starts.Refer to the manual provided with the computer for detailson the power management function.Precautions for installation/removal• Be sure to handle the computer and its peripherals in such away as described in the manual of each unit.• Completely remove any dust from the connectors.• Never touch the connector portion of the wireless LAN card.• Use great care for the connector location of the wireless LANcard when installing the card in the computer.The connector may be damaged if it is forced.• The wireless LAN card can be inserted and removed with thecomputer turned on (Hot Swap feature). However, youshould set the wireless LAN card in a safely removable stateon Windows before removing it. See "When removing thewireless LAN card" on page 84.WLI-CF-S11G.book 83 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 84Installing the wireless LAN card in a notebook computerFollow the instructions in the illustration below when installing thewireless LAN card in a notebook computer.When removing the wireless LAN cardFollow the procedure below to remove the wireless LAN card whenthe Windows 2000 computer is running.• When Client Manager is active, you must not remove the wirelessLAN card. Be sure to terminate Client Manager before removingthe card.1 Click the removal icon in the task tray, and select "StopBUFFALO WLI-CF-S11G Wireless LAN Adapter."※ If you cannot find the icon, see the Windows Help.2 When the message "The 'BUFFALO WLI-CF-S11G Wireless LANAdapter' device can now be safely removed from the system." isdisplayed, click [OK].3 Remove the wireless LAN card from the computer.When inserting the wireless LAN card into the PC card slot on your computer, attach the BUFFALO's PC card adapter WLI-CF-OP available separately.WLI-CF-S11G.book 84 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 85Step 3 Installing the wireless LAN card driversPlease check the configuration of the drives on yourcomputer (page 78) before installing the drivers. In addition,confirm that the PC card driver is normally operating on yourcomputer (page 79).Turn on the computer to boot Windows 2000. Log in with the log-inname having the administrator authority (Administrator, etc.).1The installed wireless LAN card is recognized and the [FoundNew Hardware Wizard] window appears.2Click [Next].When the installed wireless LANcard is recognized as "BUFFALOWLI-CF-S11G," select [Searchfor a suitable driver for mydevice[recommended]].Click [Next].WLI-CF-S11G.book 85 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 8634 Insert the "AirNavigato CD" into the CD-ROM drive.Be sure to use the latest AirNavigato CD of version 3.62 orlater. Note that the AirStation may include an AirNavigatorCD of earlier version than 3.62.Select the "Optional searchlocations" as shown below.Floppy Drive：Not checkedCD-ROM Drive：Not checkedSpecify a locations：CheckedClick [Next].WLI-CF-S11G.book 86 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 87When you insert the "AirNavigato CD" into the CD-ROMdrive, the AirNavigator menu window may automaticallyappear. In this case, click [Exit] to close the window.56⇒ Continued on next pageEnter "D:\CFS11G\WIN2000"to the "Copy manufacturers'files from" field.Click [OK].Confirm that"d:\cfs11g\win2000\nets11.inf" is displayed.Click [Next].WLI-CF-S11G.book 87 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 887The message "there is no guarantee that this software works correctlywith Windows " appears, but the operation has been verified in BUFFALO. Click [Yes] to proceed with the installation procedure.8Click [finish].Now you have completed the wireless LAN card driver installationprocedure. Proceed to the next step to confirm that the installedwireless LAN card is normally operating.Step 4 Confirming that the installed wireless LAN card is normally operatingUpon completion of the installation of the wireless LAN card drivers,confirm that the wireless LAN card is normally installed by using theprocedure below.1Select [Start]-[Settings]-[Control Panel].2Double-click [System].Confirm that "BUFFALO WLI-CF-S11G Wireless LANAdapter" is displayed.Click [Yes].WLI-CF-S11G.book 88 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 8934Confirm that "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is displayedunder [Network adapters] without any error mark ("x" or "!") indicated.When "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is displayed withoutany error mark ("x" or "!"), your wireless LAN card is normally operating.If an error mark ("x" or "!") is indicatedSee "I want to uninstall the wireless LAN card" on page 106 in Chapter 5,and then uninstall and re-install the wireless LAN cad drivers.Click the [Hardware]tab.Click the [Device Manager]button.WLI-CF-S11G.book 89 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI-CF-S11G User's Manual 90To make the AirStation settingsRefer to the AirStation manual to make the AirStation settings.WLI-CF-S11G.book 90 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 914.2 Preparing for Connecting to the NetworkStep 5 Making the network settingsUpon completion of confirming that the installed wireless LAN card isnormally operating, make the settings for connecting to the network. Forhow to make the settings, refer to the Windows 2000 manual or Help file.Step 6 Installing Client Manager"Client Manager" is a tool for communicating with wireless LAN computersdirectly or via AirStation. It is necessary to install Client Manager in allwireless LAN computers.Use the procedure below to install Client Manager.1 Insert the "AirNavigato CD" into the CD-ROM drive.Be sure to use the latest AirNavigato CD of version 3.62 orlater. Note that the AirStation may include an AirNavigatorCD of earlier version than 3.62.When you insert the "AirNavigato CD" into the CD-ROMdrive, the AirNavigator menu window may automaticallyappear. In this case, proceed to Step 4.⇒ Continued on next pageWLI-CF-S11G.book 91 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 922Double-click [My Computer] on Desktop.3Double-click the CD-ROM icon（）.456Select [Install the ClientManager].Click [Next].Click [Next].Click [Next].WLI-CF-S11G.book 92 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 93789Click [No] when you do not wish to add Client Manager to the Startupmenu.⇒ Continued on next pageClick [Next].Select "Client Manager."Click [Next]. Copying thefiles required for theinstallation will start.Reconfirm the component tobe installed. Click [Yes]. Client Managerwill be registered in theStartup menu.WLI-CF-S11G.book 93 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 9410Now you have completed the Client Manager installation process.To uninstall Client Manager1Select [Start]-[Settings]-[Control Panel].2Double-click "Add/Remove Programs."3Select "Client Manager" and click [Add/Remove].4Select "Remove" and click [Next].5When the message "Do you want to completely " appears, click[OK].6When the "InstallShield Wizard Complete" window opens, click[Finish].Click [Finish].WLI-CF-S11G.book 94 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 954.3 Connecting to the NetworkUpon completion of computer settings, you can connect your computer tothe network. There are two methods for connecting the computer to thenetwork as shown below.•Communicating via AirStation -a•Communicating with wireless LAN computers -bStep 7 -a Communicating via AirStationTo make communications using the AirStation, set the ESS-ID using ClientManager.1Select [Start]-[Programs]-[AirStation Utility]-[Client Manager].If the icon below appears in the task tray in the lower right on thescreen, you can double-click that icon to start Client Manager. or 2⇒ Continued on next pageStep 1Step 7Step 1Step 7Select [File]-[Manual].WLI-CF-S11G.book 95 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 9631. Select "11Mbps Communication over AirStation" in the"Network Mode" field.2. Enter the AirStation ESS-ID to the "ESS-ID" field.3. Click [OK].The initial setting of the AirStation ESS-ID shows the last six digits ofthe MAC address of the AirStation plus "GROUP" (upper-case).4Enter an "WEP Key" if encryption with WEP is used in the network. Ifthe AirStation is used in the initial state, no encryption is set. Leave thearea empty in this case.5Click [OK].AirStation retrieval will bestarted.WLI-CF-S11G.book 96 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 976When the access to the AirStation is successful, the AirStationindication turns from gray to black so that the antenna mark（）appears. If the AirStation indication does not change to black, checkthe AirStation ESS-ID and WEP settings, and then repeat from Step2.After the computer has succeeded in connecting to the AirStation, aslower data rate such as "2Mbps" may be displayed in the "Transferspeed" column. In this case, the correct data rate will appear whenthe practical communication starts.Step 7 -b Communicating with wireless LANcomputersWhen communicating with wireless LAN computers, manually set a radiochannel using Client Manager.1Select [Start]-[Programs]-[AirStation Utility]-[Client Manager].If the icon below appears in the task tray in the lower right on thescreen, you can double-click that icon to start Client Manager. or ⇒ Continued on next pageWhen this window appears,the access to the AirStationis successful.WLI-CF-S11G.book 97 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 98234Now you have completed the radio channel configurationprocedure.Select [File]-[Manual].Select the same channel asthe other computers that youwish to communicate with inthe "DS Channel" field.Select "Peer to peercommunication" in the"Network Mode" field.Click [OK].Click [OK].Enter an "WEP Key" ifencryption with WEP is usedin the network. If the initialsettings are used, noencryption is set. Leave thearea empty in this case.WLI-CF-S11G.book 98 ページ ２００２年２月２７日　水曜日　午後９時１０分
4WLI2-CF-S11 User's Manual 99Step 8 Starting communicationUpon completion of the radio channel configuration, you can access acomputer on the network.For how to make the network settings and how to make communications,refer to the Windows 2000 manual or Help file.WLI-CF-S11G.book 99 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 100MEMOWLI-CF-S11G.book 100 ページ ２００２年２月２７日　水曜日　午後９時１０分
■Overview Chapter 5Chapter 5TroubleshootingThis chapter describes problems thatmay occur during operation of thewireless LAN card, possible causes, andsolutions for these problems.5.1 Trouble in the Wireless LAN Card Setting■ Wireless LAN card installation windowdoes not appear. ..........................102page■ The ! mark is attached to the wirelessLAN card icon. .............................104page■ The wireless LAN card cannot be removedfrom the Windows 2000 computer. .... 104page■ Communication is disabled when thewireless LAN card is re-installedafter removal. ...............................104page■ When Client Manager is started, themessage " ★★無線カードが見つかりません★★ " appears. .............105page■ The wireless LAN card driverscannot be installed. ......................105page■ I want to uninstall the wireless LANcard. .............................................106page■ AirStation cannot be found byAirStation Manager(when you areusing AirStation). ..........................112page■ AirStation cannot be found during executionof the Simple InstallationWizard. ... 112page5.2 Trouble in Communication With Wireless LAN Computers ■ The wireless LAN card drivers aresuccessfully configured in the computer,but the AirStation is not detected. ...113page■ Other computers are not listed (during communication withoutthe AirStation). ............................. 114page■ I want to check theIP address/MAC address. ............121page■ II do not know how to assignthe IP address. ............................122pageAirStation Related ProblemsRefer to the manual included in AirStation.WLI-CF-S11G.book 101 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 1025.1 Trouble in the Wireless LAN Card SettingYou have verified with the confirmation procedure shown below that the PCcard driver is operating normally, but the installation window does notappear after the wireless LAN card is installed.• Windows Me/98: "Confirming the PC card driver" on page 36 in Chapter 3• Windows 2000: "Confirming the PC card driver" on page 79 in Chapter 4Possible cause ①： The wireless LAN card is not firmly inserted to thePC card slot on the computer. Alternatively, it isinserted in the reverse direction.Solution ①： After confirming the connector side of the wirelessLAN card, completely insert the card.Possible cause ②： The wireless LAN card drivers are not correctlyinstalled.Solution ②： Uninstall the wireless LAN card drivers, and re-install them according to the instructions.■ Wireless LAN card installation window does not appear.WLI-CF-S11G.book 102 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 103《Re-installing the wireless LAN card drivers》The following describes the procedure for re-installing the wireless LANcard drivers.1Carefully read the section "I want to uninstall the wireless LANcard" on page 106, and uninstall the wireless LAN card drivers.2Remove the installed wireless LAN card from your computer.3Follow the instruction below according to your Windows type, andconfirm that the PC card driver is operating normally.WindowsCE：You do not have to check the PC card driver.WindowsMe/98："Checking the PC card driver" on page 36.Windows2000：See "Checking the PC card driver" on page 79.4Install the wireless LAN card drivers. See the appropriate pageshown below according to you Windows type.WindowsCE：See " Installing the wireless LAN card drivers" onpage 18 in Chapter 2.WindowsMe/98：See " 　Installing the wireless LAN card drivers" onpage 43 in Chapter 3.Windows2000：See " 　Installing the wireless LAN card drivers" onpage 85 in Chapter 4.Step 1Step 2Step 1Step 3Step 1Step 3WLI-CF-S11G.book 103 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 104When the procedure shown below is executed, the ! mark appears next to thewireless LAN card icon.•"Capter 3　Windows Me/98Settings"at " 　4 Confirming that the wireless LAN card is normally operating" on page 50 in Chapter 3•"Capter 4　Windows 2000 Settings"at " 　Confirming that the wireless LAN card is normally operating" on page 88 in Chapter 4Solution： See Solution (2) for the problem "The wireless LANcard installation window does not appear" on page 102.When you try to remove the wireless LAN card from your Windows 2000computer, the message "Couldn't stop‘BUFFALO WLI-CF-S11GWireless LAN Adapter’device due to accessing from a program." appears.Possible cause：Client Manager is active.Solution：Quit Client Manager before removing the wirelessLAN card.Solution：Make the connection settings using Client Manager.■ The ! mark is attached to the wireless LAN card icon.■ The wireless LAN card cannot be removed from the Windows 2000 computer.■ Communication is disabled when the wireless LAN card is re-installed after removal.Step 1Step 4Step 1Step 4WLI-CF-S11G.book 104 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 105Possible cause：You are using an old version of Client Manager.Solution：Uninstall the current Client Manager. Then, installClient Manager from the "AirNavigator CD" ofversion 3.62 or later.For the Client Manager uninstall procedure, see "To uninstall ClientManager" on page 65.Possible cause： You are using an old version of the "AirNavigato CD".Solution：When installing the wireless LAN card drivers, besure to use the "AirNavigato CD" of version 3.62or later. Note that the AirStation may includean AirNavigator CD of earlier version than 3.62.■ When Client Manager is started, the message "missing wireless LAN adapter" appears.■ The wireless LAN card drivers cannot be installed.WLI-CF-S11G.book 105 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 106《WindowsCE》Be sure to remove the wireless LAN card from yourWindows CE device before staring the procedure below.1Select [Start]-[Settings]-[System]-[Add/Remove Programs].21. Tap [BUFFALO WLI-CF-S11G].2. Tap [Delete].3 When the message "Will you remove this device?"appears, tap [Yes].4Reset the Windows CE device.For how to reset the Windows CE device, refer to the manualprovided with your Windows CE device. Never reset your WindowsCE device to the initial setting state as it will delete all data.《WindowsMe/98》Confirm that the wireless LAN card is firmly inserted in yourWindows computer before starting the procedure below.1Select [Start]-[Settings]-[Control Panel].2Double-click the [System] icon in [Control Panel].■ I want to uninstall the wireless LAN card.WLI-CF-S11G.book 106 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 10731. Click the [Device Manager] tab.2. Select "BUFFALO WLI-CF-S11G Wireless LAN Adapter" in[Network Adapters].3. Click [remove].If the driver name is not listed in the [Network Adapters],check the [Other devices] list.If "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is listedin [Other devices], follow the steps below.1. Select "BUFFALO WLI-CF-S11G Wireless LANAdapter."2. Click [Remove].4Click [OK].5Click [No].6Double-click the "Network" icon in "Control Panel."7When "BUFFALO WLI-CF-S11G Wireless LAN Adapter"appears, delete it.8Click [OK].• If the message "Do you want to restart your computer now?"appears, click "No."WLI-CF-S11G.book 107 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 1089Select [Start]-[Programs]-[Accessories]-[Windows Explorer].10 Select [Tools]-[Folder Options], and then click the "View" tab.11 1. Select "Show hidden files and folders."2. Click [OK].12 Open the folders "Windows," "INF," and "OTHER" in that order onthe drive with Windows Me/98 installed.13 1. Select "MELCO INC.NETS11."2. Click [Delete].14 Exit Windows Me/98. Turn off your computer.《Windoes2000》1Select [Start]-[Settings]-[Control Panel].2Double-click [System].3Click [Hardware].4Click [Device Manager].5Double-click [Network Adapters].6Right-click "BUFFALO WLI-CF-S11G Wireless LAN Adapter" andselect [uninstall].7When "Confirm Device Removal" appears, click [OK].WLI-CF-S11G.book 108 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 1098Select [Start]-[Programs]-[Accessories]-[Windows Explorer] tostart Explorer.9Select [Tools]-[Folder Options].10 Double-click [View].11 Select [Show hidden files and folders].12 Click the checkbox for [Hide file extensions for known file types]to remove a check mark.13 Click [OK].14 Double-click the OEM?.INF files ("?" for a number such asOEM1.INF) to open in the \WINNT\INF folder on the drive withWindows 2000 installed. Find the file containing the characterstring "WLI-CF-S11G" from those OEM?.INF files.15 The OEM?.INF file with the character string "WLI-CF-S11G" andthe OEM?.PNF ("?" for the same number) are the wireless LANcard drivers. Delete these files.WLI-CF-S11G.book 109 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 110AirStation Manager does not allow selecting "File"-"Connect"Possible cause：You are using an old version of AirStation Manager.Solution：Uninstall AirStation Manager. Then, installAirStation Manager from the "AirNavigator CD" of version 3.62 or later.No window appears to set the MAC address, group name, encryption key,and roaming function for AirStation.Possible cause：You are using an old version of the SimpleInstallation Wizard.Solution：Start the Simple Installation Wizard using the"AirNavigator CD" of version 3.62 or later.■ AirStation cannot be found by AirStation Manager (when you are using AirStation).■ AirStation cannot be found during execution of the Simple Installation Wizard.WLI-CF-S11G.book 110 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 1114.2 Trouble in Communication With Wireless LAN ComputersPossible cause ①： •The wireless LAN card is not firmly inserted.•The wireless LAN card driver installation hasfailed.Solution ①： See "The wireless LAN card installation window does notappear" on page 102, and refer to the AirStation manual.Possible cause ②： You are using an old version of Client Manager.Solution ②： Uninstall the current Client Manager. Then, installClient Manager from the "AirNavigator CD"provided with the WLI2-CF-S11.When uninstalling the current Client Manager, see the procedure in"To uninstall Client Manager" on page 65 for Windows ME/98 or onpage 94 for Windows 2000.■ The wireless LAN card drivers are successfully configured in the computer, but the AirStation is not detected.WLI-CF-S11G.book 111 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 112You have confirmed on Device Manager that the wireless LAN card isoperating normally, but other computers on the network are not listed.If you are using the AirStation, take measures with theAirStation manual.Possible cause ①： The wireless LAN card is not operating normally.Solution ①： See "The wireless LAN card installation window doesnot appear" on page 102.Possible cause ②： No password was entered during Windows startup.(It is assumed that you clicked [Cancel] in the username/password entry window or pressed the <ESC>key on the keyboard during display of that window.)Solution ②： Be sure to click [OK] in the user name/passwordentry window displayed during Windows Me/98startup.If you forget your password, enter another user name,so that a new user name and a new password will beregistered in your computer.The password field may be empty, but be sure to click[OK].■ Other computers are not listed (during communication without the AirStation).WLI-CF-S11G.book 112 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 113Possible cause ③： The network settings are not correctly made.Solution ③： Check the protocol, workgroup name, and sharingsettings according to your Windows type.WindowsMe/98：See "3.2 Preparing for connecting to the network" on page 52 inChapter 3.Windows2000：Refer to the Windows 2000 manual.Possible cause ④： It takes much time to list connected computers bysearching the network.Solution ④： Use the procedure below to search for thecomputers.《WindowsMe/2000》1Right-click [My Computer] on Desktop.2Select [search].31. Enter the target computer name to the "Computer Name" field.2. Click [Find Now].4Double-click the icon of the found computer to access it.WLI-CF-S11G.book 113 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 114《Windows98》1Select [Start]-[Find]-[Computers].21. Enter the target computer name to the "Name" field.2. Click [Find Now].3Double-click the icon of the found computer to access it.Possible cause ⑤： The signal condition is so poor that other computersare out of effective signal range.Solution ⑤： Reduce the distance or remove obstacles between thewireless LAN computers, and then retry to connect.Possible cause ⑥： The radio channel and WEP encryption key settingsdiffer from those of the computers to be connected.Solution ⑥： Check the radio channel and WEP encryption keysettings of the target computers, and then set thesame values in your computer.Follow the steps below to set the radio channel.1Select [Start]-[Programs]-[AirStation Utility]-[Client Manager].If the icon below appears in the task tray in the lower right on thescreen, you can double-click that icon to start Client Manager.WLI-CF-S11G.book 114 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 115 or 231. Select "Peer to Peer Communication" in the "Network Mode"field.2. In the "DS Channel" field, select the same channel as the othercomputers equipped with a wireless LAN card of anothercompany.3. Click [OK].4Select [File]-[Manual].Enter an "WEP Key" ifencryption with WEP isused in the network. If theinitial settings are used, noencryption is set. Leavethe area empty in this case.Click [OK].WLI-CF-S11G.book 115 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 116When a 128-bit encryption key cannot be entered, re-install ClientManager using the "AirNavigator CD" of version 3.62 or later.Possible Cause ⑦： Client Manager is incorrectly configured. Thecommunication mode is not set to "Peer to PeerCommunication"Solution ⑦： Set the communication mode to "Peer to PeerCommunication" using Client Manager Use thesteps below to set the communication mode.1Select [Start]-[Programs]-[AirStation Utility]-[Client Manager].If the icon below appears in the task tray in the lower right on thescreen, you can double-click that icon to start Client Manager. or 21. Select [File]-[Manual].3Select the same channel as the other computers that you wish to communicate with in the "DS Channel" field.Click [OK].Select "Peer to Peer Communication" in the "Network Mode" field.WLI-CF-S11G.book 116 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 117Solution： If the TCP/IP protocol is installed, you can checkthe IP address/MAC address using the procedurebelow.《WindowsMe/98》1Select [Start]-[Run].2Enter "WINIPCFG."Click [OK].The "IP SET" dialog box appears.31. Select "BUFFALO WLI-CF-S11G."2. The MAC address appears in the "Adapter Address" field.3. The IP address appears in the "IP Address" field.■ I want to check the IP address/MAC address.WLI-CF-S11G.book 117 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 118《Windows2000》1Select [Start]-[Programs]-[Accessories]-[Command Prompt].2When "C:\>" appears on the screen, type "IPCONFIG/ALL."Press the <ENTER> key.3Connection-specific DNS Suffix:Description : BUFFALO WLI-CF-S11G Wireless LAN AdapterPhysical Address : 00-60-1D-1F-36-23DHCP Enabled : YesIP Address : 192.168.0.2Subnet Mask : 255.255.255.0Default Gateway : 192.168.0.1DNS Servers : 192.168.0.1The MAC address appears in the "Physical Address" field. The IP address appears in the "IP Address" field.WLI-CF-S11G.book 118 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 119Solution： Set the IP address using the following for reference.When a DHCP server (*) exists on the network:Select the following option.WindowsCE ："Use server-assigned IP address"WindowsMe/98："Obtain an IP address automatically"Windows2000 ："Obtain an IP address automatically"When the IP address is already assigned in other computers on the networkCheck with the network administrator the IP address to be set inyour computer.When no IP address is assigned in the computers on the networkSet the IP address in the computers and AirStation as shownbelow.<Example>IP Address Net maskAirStation ： 192.168.0.1 （255.255.255.0）Computer A ： 192.168.0.2 （255.255.255.0）Computer B ： 192.168.0.3 （255.255.255.0）Computer C ： 192.168.0.4 （255.255.255.0）　　・Computer X ： 192.168.0.254 （255.255.255.0）■ I do not know how to assign the IP address.WLI-CF-S11G.book 119 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 120※ The DHCP server automatically assigns the IP addressto the computers on the network. (Some models ofAirStation have this function.)When such equipment with the DHCP server functionas the Windows 2000/NT server or dial-up router existson the network, the DHCP server function may beoperating. Refer to the manual included in the Windows2000/NT or dial-up router to check whether the DHCPserver function is active on the Windows 2000/NTserver or dial-up router. Alternately, inquire to themanufacturer.When the network includes only Windows Me/98computers, no DHCP server exists.WLI-CF-S11G.book 120 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 121WLI-CF-S11G.book 121 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 122WLI-CF-S11G.book 122 ページ ２００２年２月２７日　水曜日　午後９時１０分
5WLI2-CF-S11 User's Manual 123WLI-CF-S11G.book 123 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 124MEMOWLI-CF-S11G.book 124 ページ ２００２年２月２７日　水曜日　午後９時１０分
■Overview Chapter 6Chapter 6GlossaryAmong the terminology used in thismanual, this chapter describes the termsrequired for the network configurationor displayed on the Windows screens.6.1 Terms Related to the Network 6.2 Terms in Windows Screens Related to the Network ■ Sharing settings windows in WindowsMe/98 .......................................................... 13 page■ User name and password entry window inWindows Me/98 ........................................... 133page■ Identification information window inWindows Me/98 ........................................... 135pageWLI-CF-S11G.book 125 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 1266.1 Terms Related to the Network■ The following lists and describes the network-related terms in alphabetic order.ClientThe party which receives services in the client-server system is called"client" while the party which provides services is called "server."Information and services in the server can be used from a client computer.DHCP server (Dynamic Host Configuration Protocol server)When configuring a network using TCP/IP, the IP address must be set inequipment including computers involved in the network. When the DHCP server exists on the network, the IP address canautomatically be assigned to the computers and AirStation on the network.When such equipment with the DHCP server function as the Windows 2000server or dial-up router exists on the network, the DHCP server functionmay be operating.Refer to the manual included in the Windows 2000 or dial-up router tocheck whether the DHCP server function is active on the Windows 2000server or dial-up router. Alternately, inquire to the manufacturer. When thenetwork includes only Windows Me/98/95 computers, no DHCP serverexists.ESS-ID (Extended Service Set ID)The ESS-ID is an identification code required to avoid interference duringcommunication between wireless LAN computers and the AirStation. Onlythe wireless LAN computers with the same ESS-ID as the AirStation cancommunicate with the AirStation. (The ESS-ID is not used incommunication between wireless LAN computers.) The initial setting of ESS-ID in the AirStation shows the "last six digits ofthe MAC address" plus "GROUP" (upper-case). The ESS-ID is case-sensitive and can consist of up to 32 alphanumeric characters and symbols.WLI-CF-S11G.book 126 ページ ２００２年２月２７日　水曜日　午後９時１０分
6WLI2-CF-S11 User's Manual 127FirmwareFirmware is software (programs) incorporated in such hardware as a router,modem, and terminal adapter (TA). Due to software integrated intohardware, it is assumed as being intermediate between hardware andsoftware.I/O port address (Input/Output port address)Input and output ports for receiving and sending information are providedbetween CPU and peripheral equipment. The I/O port address is a numberassigned to each equipment to distinguish which input/output ports are usedby which peripheral equipment.IRQ (Interrupt Request)The CPU in a computer carries out processing in accordance with a requestfrom peripheral equipment. However, it is impossible to predict when arequest is issued from which equipment. If the CPU constantly monitors allequipment to receive a request, the monitoring time will be longer than theprocessing time. Thus, when peripheral equipment wants the CPU toexecute a certain routine, a request interrupts the processing currentlyperformed by the CPU. The CPU then specifies the equipment which issuedthe request using the IRQ number, and starts the requested processing.Upon completion of the interrupt request processing, the CPU returns to theinterrupted processing.LAN (Local Area Network)LAN is a network established in a comparatively small area such as in onebuilding or on the premises of a campus. LAN generally uses transmissionspeeds of 10 Mbps to 100 Mbps.WLI-CF-S11G.book 127 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 128MAC address (Media Access Control address)The MAC address is a physical address specific to each piece of networkequipment. The MAC address consists of six bytes including the mostsignificant three bytes for the vendor code and the least significant threebytes for the user code. The vendor code is managed/assigned by the IEEEwhile the user code is controlled by the network equipment manufacturerusing its original number (without duplication). Namely, the MAC addressis a unique physical address. Based on this address, Ethernet sends andreceives packets (frames).Microsoft Network ClientMicrosoft Network Client is software installed on client computers to useWindows Me/98/2000 server services in a LAN. It usually uses "NetBEUI"or "TCP/IP" for the protocol. The TCP/IP protocol is used to connect to theInternet.NetBEUI protocolNetBEUI protocol is a network transport protocol for exchanging data in asmall-scale or mid-scale LAN. NetBEUI is equivalent to the transport and network layer protocols of theOSI protocol model. These are integrated with NetBEUI to implement anefficient communication system in the workgroup LAN environment. Thisis supported in Windows Me/98/95/2000.Peer-to-peer connectionPeer-to-peer connection is communication carried out by computers in anequal relationship with each other via LAN or WAN. Unlike a server-client system, the settings can be made to use resources(drives and folders) in other computers from any computer on the network.WLI-CF-S11G.book 128 ページ ２００２年２月２７日　水曜日　午後９時１０分
6WLI2-CF-S11 User's Manual 129ProtocolProtocol is a procedure or a set of rules used to transmit data betweennetwork terminals. For example, when communicating between two computers, the conditionsrequired for communication can be established in a procedure to assurecorrectly ordered information transmission. Such requirements includewhich first starts sending what kind of message, what kind of messageshould respond to the received message, what format data should be in, whatshould be done in case of an error, and so on.Radio channelIf several types of wireless LAN are used with different ESS-IDs on thesame floor, the transfer speed of the local wireless network may be affectedwhen communication is performed on other wireless LANs. This is becauseradio signals with the same frequency are being used. To avoid thisproblem, a different frequency (radio channel) can be set for each type ofwireless LAN to communicate without mutual interference with otherwireless LANs. * When communicating between wireless LAN computers, the same radiochannel must be used in all the wireless LAN computers involved. Resource (system resource)Resource is a generic name for IRQ and I/O port addresses assigned to thecomputer's peripheral equipment (mouse, keyboard, etc.), PCI bus adapter,wireless LAN card, and such.WLI-CF-S11G.book 129 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 130TCP/IP (Transmission Control Protocol/Internet Protocol)TCP/IP is equivalent to the network layer and transport layer of the OSIreference model, and is defined by the RFC. Therefore, execution of TCP/IP enables different terminals to communicate each other.• Normally, application protocols such as TELNET and FTP are alsoincluded.• TCP/IP is the Internet standard protocolUSB (Universal Serial Bus)USB is a new standard for connecting computers and peripheral equipment.Its features include data transfer capability at a maximum speed of 12 Mbps,compatibility with the Hot Swap feature allowing insertion and removal to/from the USB port with the computer or peripheral equipment turned on, noconflict with other devices due to no IRQ. The USB is supported inWindows Me/98/2000.WECA (Wireless Ethernet Compatibility Alliance)WECA is an organization which promotes the IEEE 802.11b High-Ratestandard for propagation of the unified wireless LAN and ensures the mutualoperation of compliant products. It was established in 1999 by sixcompanies of Lucent Technologies, Intersil, Nokia, 3com, SymbolTechnologies, and Aironet Wireless Communications that played a leadingrole in development of the IEEE 802.11 standard. The organization has been developing activities for wireless LANpropagation on world-wide basis. We have currently participated in theorganization. The latest information about the participating companies andWi-Fi certified products can be obtained from the web site below. http://www.wi-fi.org/certified_products.aspWEP [encryption] (Wired Equivalent Privacy)WLI-CF-S11G.book 130 ページ ２００２年２月２７日　水曜日　午後９時１０分
6WLI2-CF-S11 User's Manual 131Setting an encryption key in the AirStation enables protecting wirelesspackets from being externally analyzed. To communicate with theAirStation with the encryption key set, it is necessary to input an encryptionkey set on Client Manager.Wi-Fi (the standard for Wireless Fidelity)Wi-Fi is a brand name of the wireless LAN standard "IEEE 802.11b High-Rate" specified by WECA for marketing purposes. Wi-Fi is provided onlyto products that pass the WECA mutual operability test. The Wi-Fi productsare assured in mutual operability with each other by WECA.WLI-CF-S11G.book 131 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 132"Wired LAN" and "Wireless LAN"The following terms are used in this manual to distinguish between a10BASE-T/100BASE-TX LAN connected by cables and a LAN using nocables.Wired LAN……LAN connected by cablesWireless LAN…LAN using wireless communicationNote that these are not general terms and are used only fordescriptions in this manual.* A computer with BUFFALO's wireless LAN card is gen-erally referred to as a "wireless LAN computer" in this Wireless LANWired LANAirStationHubPCPCPCWireless LAN computer*Wireless LAN computer*WLI-CF-S11G.book 132 ページ ２００２年２月２７日　水曜日　午後９時１０分
6WLI2-CF-S11 User's Manual 1336.2 Terms in Windows Screens Related to the Network■ Sharing settings windows in Windows Me/98Right-click the icon of the drive to be shared and select "Sharing" from themenu, and the window shown below appears.■ User name and password entry window in Windows Me/98When you restart your computer after completing the driver installation, the"Enter Network Password" dialog box appears.• To use the network, be sure to enter your user name and password. You donot have to do so when not using the network.• The user name and password are set in the process of Windows Me/98setup. When you log in to Windows for the first time, enter the same username and password as those set during Windows Me/98 setup.• More than one user can use the same Windows computer by changing themultiple operating environments. Therefore, you can log in as a new user byentering a new user name and password.• Not shared ............：Select to cancel the drive sharing.•Shared As ............：Select to share the drive.• Share Name ......................: You can change the name of the shared drive.• Access Type......................: You can select from the following threeaccess options.• Read-Only ........................: Sets the shared drive to a read-only drive.• Full ...................................: Allows reading/writing from/to the shareddrive.• Passwords .........................: Allows reading/writing from/to the shareddrive with a password.• Passwords .........................: Password for "Access Type."WLI-CF-S11G.book 133 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 134• Read-Only Passwords...... : Set a password for reading from the shareddrive.• Full Access Passwords .... : Set a password for reading/writing from/to theshared drive.WLI-CF-S11G.book 134 ページ ２００２年２月２７日　水曜日　午後９時１０分
6WLI2-CF-S11 User's Manual 135■ Identification information window in Windows Me/98Double-click the "Network" icon, and then click the "Identification" tab.The following window appears.Computer name : Name for identifying the local computer onthe network. Set a unique name for eachcomputer.Workgroup : Name for grouping the computers on thenetwork. When it is not necessary to groupthe computers, use the same name for all thecomputers on the network.Computer Description : Supplementary explanation of the "Computername." No entry necessary.It is recommended to use alphanumeric characters for the [Computername] and [Workgroup].If the entered character string contains a special charactersuch as a period (.), the computer may be disabled fromconnecting to the network.WLI-CF-S11G.book 135 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 136MEMOWLI-CF-S11G.book 136 ページ ２００２年２月２７日　水曜日　午後９時１０分
■Overview Chapter 7Chapter 7SpecificationsThis chapter describes the specificationsof the wireless LAN card WLI2-CF-S11.7.1 Product SpecificationsWLI-CF-S11G.book 137 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 1387.1 Product SpecificationsWireless LAN interfaceConformingstandardsFCC Part15.247ETS300-328IEEE802.11b (wireless LAN standard protocol)TransmissionmethodDS-SS (IEEE802.11 compliant)Half-duplexMax. distancebetweenterminals11 Mbps transmission100 m outdoors (estimated)2 Mbps transmission200 m outdoors (estimated)1 Mbps transmission250 m outdoors (estimated)* The effective range is adversely affected by theoperating environment.• Within a reinforced concrete building suchas a condo, or a house with a metal frame• Near large metal furnitureHostinterfaceTransmissionmethod CompactFlash compliantWLI-CF-S11G.book 138 ページ ２００２年２月２７日　水曜日　午後９時１０分
7WLI2-CF-S11 User's Manual 139For the latest product information and applicable PC models, refer tothe BUFFALO's catalog, brochure, or Internet homepage (http://www.buffalotech.com).Applicable PCPersonal computers equipped with aCompactFlash slot (type II) or PC card slot (typeII) listed below.•Pocket PC• Handheld PC• IBM AT compatible PC (OADG compliant)Operating System Windows CE3.0 (Handheld PC 2000, Packet PC), Windows ME, Windows 98, Windows 2000Frequency range(central frequency) 2412 to 2462 MHz (total 111 chann els)Data transmission rate 11M 5/5.5M/2M/1M (bps)Security 40-/128-bit WEPOperating voltage 3.3VPower consumption Max. 660mWCurrent consumption Standby: Max. 200mASending: Max. 340mAOperatingenvironmentTemperature0～55 ℃Humidity20 to 80% (no condensation)Weight 18.5gDimensions 43.0mm (W) x 5.0mm (H) x 62.0mm (D)(not including 8mm antenna)WLI-CF-S11G.book 139 ページ ２００２年２月２７日　水曜日　午後９時１０分
WLI2-CF-S11 User's Manual 140MEMOWLI-CF-S11G.book 140 ページ ２００２年２月２７日　水曜日　午後９時１０分
Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one of thefollowing measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, (example - use only shielded interface cableswhen connecting to computer or peripheral devices) any changes or modifications not expresslyapproved by the party responsible for compliance could void the user's authority to operate thisequipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. End-users must follow the specific operating instructions for satisfying RFexposure compliance.This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.
WLI2-CF-S11G User’s Manual 27 May, 2003 First revision BUFFALO TECHNOLOGY.WLI-CF-S11G.book 141 ページ ２００２年２月２７日　水曜日　午後９時１０分
PY00-29xxx-DM10-011-01WLI-CF-S11G.book 142 ページ ２００２年２月２７日　水曜日　午後９時１０分

Navigation menu