BaBaiBa Technology MPSPG96 Aluminium Tube Bluetooth Selfie Stick User Manual

Shenzhen BaBaiBa Technology Co., Ltd. Aluminium Tube Bluetooth Selfie Stick

User manual

Adjustable smartphone mount can support practically any smartphone or phablet. Strong and sturdy enough for any smartphone. Expands up to 3.5” wide. The head can be adjusted to allow for 180° movement and settings. Loosen the lock knob to position your head and tighten it once you have achieved your desired position. Folds inward for compact storage. You can also remove the smartphone holder and mount a GoPro directly to the SelfieStick, or mount a point & shoot camera via the included 1/4”-20 mount. SelfieStick has five “twist and lock” sections. To deploy the sections, grasp the foam grip in one hand and the smartphone holder in the other hand. Rotate the grip counter-clockwise. You will feel each section unlock with each slight rotation. Once all of the sections are unlocked, extend the SelfieStick to your desired length. Then rotate clockwise to lock the sections in place. Bluetooth shutter release with buttons for Apple and Android. You can control the functions on your smartphone or phablet up to 30 feet away from the SelfieStick. The SelfieStick comes with a foam grip on the bottom section so you can comfortably and securely grip your SelfieStick. Owner’s Manual Aluminium Tube Bluetooth Selfie Stick
Specifications: Compatibility: Apple, Android Load capacity: 1 lb. Weight: 6 oz. Maximum length: 34.5 in. Minimum length: 10 in. Leg sections: 5 Leg material: aluminum Maximum working distance: 30 feet Warranty: 1 year Product design and specifications subject to change without notice. How to use: 1. On initial use, charge the SelfieStick for 1 hour by con-necting the included cable between the micro USB input on the bottom of the Selfie Stick, and a USB charging device. 2. Slide the On/Off Switch located on the bottom of the SelfieStick to “On”. The LED will begin to blink. 3. Turn on your smartphone’s Bluetooth function. 4. When your phone has found “Sunpak” pair to that device. Once paired, the LED will turn off and you can go the camera functions on your phone. 5. Attach your phone to the adjustable mount of the SelfieStick. 6. Twist the foam grip section counter-clockwise to unlock the sections. Extend to your desired length and twist clockwise to lock the sections. 7. Press the Shutter Release button on the SelfieStick to take a picture or video. 8. Unscrew and remove the lock screw to mount a GoPro or the Point & Shoot adapter to the SelfieStick.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.

Navigation menu