Babaco Alarm Systems BBC-LBTX02 Remote controller User Manual

Babaco Alarm Systems Remote controller Users Manual

Users Manual

USER MANUAL Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Feature: Specification: Power: DC 3V CR2032 Battery Frequency: 433.92MHz Control Distance: 30m Operation: The remote has a battery in when you get the products and keep standby mode, when you push the button (refer the figure), the led will turn on and the remote transmitting signal to receiver. The transmitting will stop right now when you release the switch. If the Led is off when you push the button, please change a new battery as below: 1, release the screw on back 2, Open the plastic Cover 3, Take out the old battery, insert new battery 4, Covered and fill the screw 5, normal operation If the product faults, please contact with dealer.

Navigation menu