Babaco Alarm Systems BBC-LBTX02 Remote controller User Manual

Users Manual

USER MANUAL

Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Feature:

Specification:

Power: DC 3V CR2032 Battery

Frequency: 433.92MHz

Control Distance: 30m

Operation:

The remote has a battery in when you get the

products and keep standby mode, when you push

the button (refer the figure), the led will turn on and

the remote transmitting signal to receiver. The

transmitting will stop right now when you release the

switch.

If the Led is off when you push the button, please

change a new battery as below:

1, release the screw on back

2, Open the plastic Cover

3, Take out the old battery, insert new battery

4, Covered and fill the screw

5, normal operation

If the product faults, please contact with dealer.