Baby Breeza BRZ00139 Milk Bottle Warmer User Manual BW Instruction Manual 06 17 16
Baby Breeza Enterprises LLC Milk Bottle Warmer BW Instruction Manual 06 17 16
User Manual
setting guide
Quick Warming
2oz/60ml
3oz/90ml
4oz/120ml
5oz/150ml
6oz/180ml
7oz/210ml
8oz/240ml
9oz/270ml
Room Temperature (70˚F/21˚C)
Glass BottlePlastic Bottle
Cold Temperature (39˚F/4˚C)
1oz/30ml
2oz/60ml
3oz/90ml
4oz/120ml
5oz/150ml
6oz/180ml
7oz/210ml
8oz/240ml
9oz/270ml
1oz/30ml
2oz/60ml
3oz/90ml
4oz/120ml
5oz/150ml
6oz/180ml
7oz/210ml
8oz/240ml
9oz/270ml
1oz/30ml
2oz/60ml
3oz/90ml
4oz/120ml
5oz/150ml
6oz/180ml
7oz/210ml
8oz/240ml
9oz/270ml
1oz/30ml
setting 1
setting 2
setting 3
setting 4
setting 5
setting 6
setting 6
setting 2
setting 3
setting 4
setting 5
setting 6
setting 7
setting 8
setting 9
setting 1
Glass BottlePlastic Bottle
Glass BottlePlastic Bottle Glass BottlePlastic Bottle
setting 1
setting 2
setting 3
setting 3
setting 4
setting 5
setting 6
setting 2
setting 3
setting 4
setting 5
setting 6
setting 7
setting 8
setting 9
setting 1
This setting guide should only be used as general reference. After some uses, you will learn what
settings will work best for your bottles. Always test your bottles before feeding your baby.
Steady Warming
Room Temperature (70˚F/21˚C) Cold Temperature (39˚F/4˚C)
setting 2
setting 1
setting 4
setting 4
setting 5
setting 7
setting 7
setting 7
setting 2
setting 3
setting 4
setting 5
setting 6
setting 7
setting 8
setting 9
setting 1
setting 2
setting 1
setting 3
setting 4
setting 5
setting 6
setting 7
setting 7
setting 2
setting 3
setting 4
setting 5
setting 6
setting 7
setting 8
setting 9
setting 1
1
CAUTION: If E1, E2, E3, or E4 error messages appear on the bottle warmer screen,
please contact customer service before any continued use of the bottle warmer.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
When using electrical appliances, basic safety precautions should always be followed
including the following:
TECHNICAL DATA
Supply voltage: 120V ~ 60Hz Power - Heater : 500W
Model: BRZ00139 Current: 4.4A
2
Get to know your
Baby Brezza Safe+Smart Bottle Warmer
Bottle Tray
Components
Base
Bottle Warmer Cover
Steam Chamber Window
Control Panel
Quick Warm Fill Line
Power Cord
Steam Chamber
Controls + Indicator Icons
Bluetooth LED LCD - indicates function and time
Power
Room
Temperature
Bottle
oz. Settings
Warming Settings
Cold
Temperature
Bottle
Quick
Setting
Steady
Setting
Room Temp
Cold Temp
Quick Warm
Steady Warm
LCD Screen Setting Icons:
Place the bottle tray into the warmer. Ensure that
the tabs around the bottle tray rim align with the
slots in the bottle warmer.
Follow steady warm, quick warm, or defrost instructions on Pages 4 and 5.
Preparing the Bottle Warmer
Insert plug into wall outlet.
Place your bottle into the tray.
CAUTION: Before warming any bottles in this appliance, always remove any
inner bottle vent systems from the bottle to prevent fluids from leaking if gas forms
during warming.
3
Bottle Warming
6. Select setting. Press the “room temp” or “cold” buttons repeatedly to choose the appropriate
setting for your bottle. Refer to the “Setting Guide” on the back cover of this booklet to determine
the setting to use. Setting is based on the number of ounces you are heating, and whether
you are using a glass or plastic bottle.
7. Press to begin heating.
Press to begin heating.
To use the defrost setting, press the “cold” temperature setting until you reach the
icon “F” on the LCD screen. Use this function to defrost frozen milk pouches or food jars.
Defrosting Frozen Milk or Food
If you are warming a cold bottle or cold food (bottle/food that
has been refrigerated or is approximately 35F/4C), you will select
your bottle size using the “cold” button on the control panel.
5. Identify the starting temperature of your bottle.
If you are warming a room temperature bottle
(approximately 70F/21C), you will select your bottle
size using the “room temp” button on the control panel.
4. Press to turn on machine.
1. Prepare the bottle tray in the machine as described
in “Setting Up the Warmer” through step 3.
2. Fill the bottle warmer with water until it matches the height
of the liquid inside the bottle. Use room temperature water
for optimal heating. Using hot or cold water will result in
inaccurate or dangerous bottle temperatures.
3. Close the bottle warmer cover.
Recommended for breast milk, defrosting, heating food or
formula bottles that you want to warm with low heat. Used to
preserve nutrients that may be affected by high heat.
Using the “Steady Warm” Function
4
Make sure water
level is the same as
liquid in bottle.
CAUTION: If you are warming multiple bottles, allow the bottle warmer to cool
before warming the next bottle.
CAUTION: Any other servicing should be performed by an authorized
service representative.
When heating is complete, the display will flash 00:00 and there will be 5 audible beeps
that indicate a finished heating cycle.
Using the “Quick Warm” Function
Warms bottles rapidly. Recommended for formula or dairy milk.
5. Select setting. Press the “room temp” or “cold” buttons repeatedly to choose the appropriate
setting for your bottle. Refer to the “Setting Guide” on the back cover of this booklet to determine
the setting to use. Setting is based on the number of ounces you are heating, and whether
you are using a glass or plastic bottle.
6. Press to begin heating.
If you are warming a cold bottle or cold food (bottle/food
that has been refrigerated or are approximately 35F/4C), you will
select your bottle size using the “cold” button on the control panel.
4. Identify the starting temperature of your bottle.
If you are warming a room temperature bottle
(approximately 70F/21C), you will select your bottle
size using the “room temp” button on the control panel.
3. Press to turn on machine.
1. Prepare the bottle tray in the machine
as described in “Setting Up the Warmer”.
2. Fill the bottle warmer with room temperature water
to the “Quick Warm” fill line. Using hot or cold water will
result in inaccurate or dangerous bottle temperatures.
5
Bottle Warming
• Unplug the bottle warmer and remove bottle tray from base.
• Carefully pour out any water in base. If necessary, wipe base with damp cloth.
• Do not submerge the appliance into any water or liquid.
• Do not disassemble the appliance as there are no serviceable parts inside.
• Bottle tray is dishwasher safe.
• Wipe dry before next use. Note: Do not use scouring pads, abrasives or solvents for cleaning.
It is important to de-scale this appliance every 4 weeks to ensure that it continues to work properly.
Pour all remaining water out of the water chamber. To de-scale, mix 2oz (50ml) of white vinegar with
4oz (100ml) of cold water into the water chamber, and then run one heating cycle on setting 5 until
any scaling has been removed. Please ensure proper ventilation when descaling with vinegar.
After a few uses, you will learn what the best warming times are for your baby.
Always test the formula/breast milk temperature before feeding your baby.
Lift the lid open and carefully lift the bottle tray from
the orange lip. Place it on a countertop and remove
the bottle.
Gently swish the fluid in the bottle thoroughly so the
temperature becomes uniform throughout the bottle.
6
Cleaning the Bottle Warmer
De-scaling the Bottle Warmer
Smart Bottle Warmer Mobile App
The Smart Bottle Warmer can be set up straight from your mobile device.
Download and install the Baby Brezza Smart Bottle Warmer app located in the app store.
Bluetooth is required on your mobile device to connect to the Baby Brezza Smart Bottle Warmer.
Press on the Smart Bottle Warmer to turn it on.
Ensure that your mobile device is
at most 20 ft. from the bottle warmer.
7
Once connected, the setup screen will display on your mobile device.
Setup Interface
Setting Scroll
Starting
Temperature
Scroll
Timer
Volume Control
Setting Guide
Warming
Speed
Scroll
Start/Cancel
Button
In the Baby Brezza App, press to sync your
phone to your Smart Bottle Warmer. Ensure that
bluetooth connectivity is on in your mobile device.
Press the “Start” button on your
mobile device to beginning warming.
Scroll through each setting by pressing on the
arrow keys or swiping up or down on each column.
or
Use the setting guide if you need assistance
choosing the correct warmer setting.
Timer will begin counting down. If bottle
warming needs to be stopped for any reason,
simply press the “cancel” button to stop heating.
When a warming cycle is cancelled, the timer will reset to the start time of the last setting used. Adjust the
warming settings accordingly and press “start” to begin a new cycle.
8
Prepare your bottle and bottle warmer.
Place bottle into bottle warmer Add water to bottle warmer based on your setting
or
CAUTION: Allow the bottle warmer to cool before starting a new warming cycle.
9
Troubleshooting
Press to turn on the
machine. Do not hold
down the button.
Condition Cause Remedy
Machine will
not start.
Machine is unplugged. Ensure that machine is
securely plugged into an
outlet.
Ensure that bottle tray is
lined up with bottle tray
slots in the bottle warmer.
Turn on the Bluetooth
connectivity in your mobile
device before syncing to
the machine.
Mobile device needs to
be within 20ft of the bottle
warmer.
Add water to the marked
Quick Warm fill line.
Add water until it matches
the height of liquid in your
bottle.
Try a lower setting according
to your preference.
Try a lower setting according
to your preference.
Reduce water in bottle
warmer to the required
height based on your setting.
(Refer to pg 3-4)
Try a higher setting
according to your
preference.
Machine is not turned on.
Lid will not close.
Warmed bottle is
too hot.
(Quick warm setting)
Bottle Tray is misaligned inside
bottle warmer.
Not enough water added to
bottle warmer.
Machine will not
sync to mobile device.
Bluetooth connectivity in mobile
device is not turned on.
Mobile device is out of range.
Warmed bottle is
too hot.
(Steady warm setting)
Not enough water added to
bottle warmer.
Setting time is too long or
incorrect setting chosen.
Warmed bottle is
too cold.
(Quick & Steady
warm settings)
Too much water added to
bottle warmer.
Setting time is too short or
incorrect setting chosen.
Setting time is too long or
incorrect setting chosen.
If you can not remedy problems with the machine by using the troubleshooting chart above,
please contact Customer Service at: 1-888-396-6552 Customer Service and Warranty
If you are experiencing problems with your Baby Brezza Smart Bottle Warmer,
please call our Customer Service department at 1-888-396-6552 before returning
the product so that we can offer you our best service customized to your particular situation.
Limited 1-year Warranty
The limited warranty is valid only on products bought through authorized resellers and used in the
United States and Canada. Buying through an unauthorized reseller or using this product outside
of the United States and Canada automatically voids this warranty. This warranty is available to
consumers only. You are a consumer if you own a Baby Brezza Bottle Warmer that was purchased
at retail for personal, family or household use. Except as otherwise required under applicable state
law, this warranty is not available to retailers or other commercial purchasers or owners.
We warrant that your Baby Brezza Bottle Warmer will be free of defects in material or workmanship
under normal home use for one year from the date of original purchase. Customer will be required
to present original proof of purchase in order to obtain the warranty benefits. In the event that
you do not have proof of purchase date, the purchase date for purposes of this warranty
will be the date of manufacture. If your Baby Brezza Bottle Warmer should prove to be defective
within the warranty period, we will repair it or, if we consider it necessary, replace it.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
10
Troubleshooting
“E5” error displays
on machine or
“Error” message
displays on app.
Little or no water has been added
to the machine.
Add cold water to the
machine and let it sit and
cool for 5 min. Empty out cold
water and restart the bottle
warmer. Make sure to add
the appropriate amount
of water needed for warming.
E1, E2, E3, or E4 error
displays on machine.
Internal malfunction in machine. Please contact customer
service before continuing to
use your machine.
Condition Cause Remedy
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.