Baby Breeza BRZ00139 Milk Bottle Warmer User Manual BW Instruction Manual 06 17 16

Download:
Mirror Download [FCC.gov]
Document ID	3106261
Application ID	epMB4fngVydbBIz5HNQZYQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	83.63kB (1045413 bits)
Date Submitted	2016-08-22 00:00:00
Date Available	2016-08-22 00:00:00
Creation Date	2016-06-17 10:33:31
Producing Software	Adobe PDF library 9.90
Document Lastmod	2016-06-17 10:33:31
Document Title	BW Instruction Manual_06-17-16
Document Creator	Adobe Illustrator CS5

setting guide
This setting guide should only be used as general reference. After some uses, you will learn what
settings will work best for your bottles. Always test your bottles before feeding your baby.
Quick Warming
Room Temperature (70˚F/21˚C)
Plastic Bottle
Cold Temperature (39˚F/4˚C)
Glass Bottle
Plastic Bottle
Glass Bottle
setting 1
1oz/30ml
setting 1
1oz/30ml
setting 2
2oz/60ml
setting 2
2oz/60ml
setting 3
3oz/90ml
setting 1
setting 3
3oz/90ml
setting 1
setting 4
4oz/120ml
setting 2
setting 4
4oz/120ml
setting 2
setting 5
5oz/150ml
setting 3
setting 5
5oz/150ml
setting 3
setting 6
6oz/180ml
setting 4
setting 6
6oz/180ml
setting 3
setting 7
7oz/210ml
setting 5
setting 7
7oz/210ml
setting 4
setting 8
8oz/240ml
setting 6
setting 8
8oz/240ml
setting 5
setting 9
9oz/270ml
setting 6
setting 9
9oz/270ml
setting 6
Steady Warming
Room Temperature (70˚F/21˚C)
Plastic Bottle
Glass Bottle
Cold Temperature (39˚F/4˚C)
Plastic Bottle
Glass Bottle
setting 1
1oz/30ml
setting 1
setting 2
2oz/60ml
setting 1
3oz/90ml
setting 2
setting 3
3oz/90ml
setting 2
setting 4
4oz/120ml
setting 4
setting 4
4oz/120ml
setting 3
setting 5
5oz/150ml
setting 4
setting 5
5oz/150ml
setting 4
setting 6
6oz/180ml
setting 5
setting 6
6oz/180ml
setting 5
setting 7
7oz/210ml
setting 7
setting 7
7oz/210ml
setting 6
setting 8
8oz/240ml
setting 7
setting 8
8oz/240ml
setting 7
setting 9
9oz/270ml
setting 7
setting 9
9oz/270ml
setting 7
setting 1
1oz/30ml
setting 2
2oz/60ml
setting 3
When using electrical appliances, basic safety precautions should always be followed
including the following:
Get to know your
Baby Brezza Safe+Smart Bottle Warmer
Components
Bottle Tray
Bottle Warmer Cover
Steam Chamber
Base
Steam Chamber Window
Quick Warm Fill Line
Control Panel
Power Cord
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
CAUTION: If E1, E2, E3, or E4 error messages appear on the bottle warmer screen,
please contact customer service before any continued use of the bottle warmer.
TECHNICAL DATA
Supply voltage: 120V ~ 60Hz
Model: BRZ00139
Current: 4.4A
Power - Heater : 500W
Controls + Indicator Icons
LCD Screen Setting Icons:
Bottle Warming
Using the “Steady Warm” Function
Bluetooth LED
LCD - indicates function and time
Power
Room
Cold
Temperature
Temperature
Bottle
Bottle
Quick
Setting
Steady
Setting
Room Temp
Recommended for breast milk, defrosting, heating food or
formula bottles that you want to warm with low heat. Used to
preserve nutrients that may be affected by high heat.
Cold Temp
1. Prepare the bottle tray in the machine as described
in “Setting Up the Warmer” through step 3.
Quick Warm
Warming Settings
oz. Settings
Steady Warm
2. Fill the bottle warmer with water until it matches the height
of the liquid inside the bottle. Use room temperature water
for optimal heating. Using hot or cold water will result in
inaccurate or dangerous bottle temperatures.
3. Close the bottle warmer cover.
4. Press
Preparing the Bottle Warmer
to turn on machine.
Make sure water
level is the same as
liquid in bottle.
5. Identify the starting temperature of your bottle.
Insert plug into wall outlet.
If you are warming a room temperature bottle
(approximately 70F/21C), you will select your bottle
size using the “room temp” button on the control panel.
If you are warming a cold bottle or cold food (bottle/food that
has been refrigerated or is approximately 35F/4C), you will select
your bottle size using the “cold” button on the control panel.
6. Select setting. Press the “room temp” or “cold” buttons repeatedly to choose the appropriate
setting for your bottle. Refer to the “Setting Guide” on the back cover of this booklet to determine
the setting to use. Setting is based on the number of ounces you are heating, and whether
you are using a glass or plastic bottle.
7. Press
to begin heating.
Defrosting Frozen Milk or Food
Place the bottle tray into the warmer. Ensure that
the tabs around the bottle tray rim align with the
slots in the bottle warmer.
To use the defrost setting, press the “cold” temperature setting until you reach the
icon “F” on the LCD screen. Use this function to defrost frozen milk pouches or food jars.
Place your bottle into the tray.
Press
to begin heating.
Follow steady warm, quick warm, or defrost instructions on Pages 4 and 5.
CAUTION: Before warming any bottles in this appliance, always remove any
inner bottle vent systems from the bottle to prevent fluids from leaking if gas forms
during warming.
Bottle Warming
Using the “Quick Warm” Function
Warms bottles rapidly. Recommended for formula or dairy milk.
1. Prepare the bottle tray in the machine
as described in “Setting Up the Warmer”.
2. Fill the bottle warmer with room temperature water
to the “Quick Warm” fill line. Using hot or cold water will
result in inaccurate or dangerous bottle temperatures.
3. Press
to turn on machine.
4. Identify the starting temperature of your bottle.
Lift the lid open and carefully lift the bottle tray from
the orange lip. Place it on a countertop and remove
the bottle.
Gently swish the fluid in the bottle thoroughly so the
temperature becomes uniform throughout the bottle.
After a few uses, you will learn what the best warming times are for your baby.
Always test the formula/breast milk temperature before feeding your baby.
Cleaning the Bottle Warmer
If you are warming a room temperature bottle
(approximately 70F/21C), you will select your bottle
size using the “room temp” button on the control panel.
If you are warming a cold bottle or cold food (bottle/food
that has been refrigerated or are approximately 35F/4C), you will
select your bottle size using the “cold” button on the control panel.
5. Select setting. Press the “room temp” or “cold” buttons repeatedly to choose the appropriate
setting for your bottle. Refer to the “Setting Guide” on the back cover of this booklet to determine
the setting to use. Setting is based on the number of ounces you are heating, and whether
you are using a glass or plastic bottle.
• Unplug the bottle warmer and remove bottle tray from base.
6. Press
• Wipe dry before next use. Note: Do not use scouring pads, abrasives or solvents for cleaning.
to begin heating.
• Carefully pour out any water in base. If necessary, wipe base with damp cloth.
• Do not submerge the appliance into any water or liquid.
When heating is complete, the display will flash 00:00 and there will be 5 audible beeps
that indicate a finished heating cycle.
• Do not disassemble the appliance as there are no serviceable parts inside.
• Bottle tray is dishwasher safe.
De-scaling the Bottle Warmer
It is important to de-scale this appliance every 4 weeks to ensure that it continues to work properly.
Pour all remaining water out of the water chamber. To de-scale, mix 2oz (50ml) of white vinegar with
4oz (100ml) of cold water into the water chamber, and then run one heating cycle on setting 5 until
any scaling has been removed. Please ensure proper ventilation when descaling with vinegar.
CAUTION: If you are warming multiple bottles, allow the bottle warmer to cool
before warming the next bottle.
CAUTION: Any other servicing should be performed by an authorized
service representative.
Smart Bottle Warmer Mobile App
Prepare your bottle and bottle warmer.
The Smart Bottle Warmer can be set up straight from your mobile device.
Download and install the Baby Brezza Smart Bottle Warmer app located in the app store.
Bluetooth
Press
is required on your mobile device to connect to the Baby Brezza Smart Bottle Warmer.
on the Smart Bottle Warmer to turn it on.
or
Place bottle into bottle warmer
Ensure that your mobile device is
at most 20 ft. from the bottle warmer.
In the Baby Brezza App, press
to sync your
phone to your Smart Bottle Warmer. Ensure that
bluetooth connectivity is on in your mobile device.
Add water to bottle warmer based on your setting
or
Setup Interface
Once connected, the setup screen will display on your mobile device.
Scroll through each setting by pressing on the
arrow keys or swiping up or down on each column.
Volume Control
Use the setting guide if you need assistance
choosing the correct warmer setting.
Setting Guide
Setting Scroll
Starting
Temperature
Scroll
Timer
Warming
Speed
Scroll
Start/Cancel
Button
Press the “Start” button on your
mobile device to beginning warming.
Timer will begin counting down. If bottle
warming needs to be stopped for any reason,
simply press the “cancel” button to stop heating.
When a warming cycle is cancelled, the timer will reset to the start time of the last setting used. Adjust the
warming settings accordingly and press “start” to begin a new cycle.
CAUTION: Allow the bottle warmer to cool before starting a new warming cycle.
Troubleshooting
Condition
Machine will
not start.
Cause
Troubleshooting
Remedy
Machine is unplugged.
Ensure that machine is
securely plugged into an
outlet.
Machine is not turned on.
Press
to turn on the
machine. Do not hold
down the button.
Lid will not close.
Bottle Tray is misaligned inside
bottle warmer.
Ensure that bottle tray is
lined up with bottle tray
slots in the bottle warmer.
Machine will not
sync to mobile device.
Bluetooth connectivity in mobile
device is not turned on.
Turn on the Bluetooth
connectivity in your mobile
device before syncing to
the machine.
Mobile device is out of range.
Mobile device needs to
be within 20ft of the bottle
warmer.
Warmed bottle is
too hot.
(Quick warm setting)
Not enough water added to
bottle warmer.
Add water to the marked
Quick Warm fill line.
Setting time is too long or
incorrect setting chosen.
Try a lower setting according
to your preference.
Warmed bottle is
too hot.
(Steady warm setting)
Not enough water added to
bottle warmer.
Add water until it matches
the height of liquid in your
bottle.
Setting time is too long or
incorrect setting chosen.
Try a lower setting according
to your preference.
Too much water added to
bottle warmer.
Reduce water in bottle
warmer to the required
height based on your setting.
(Refer to pg 3-4)
Setting time is too short or
incorrect setting chosen.
Try a higher setting
according to your
preference.
Warmed bottle is
too cold.
(Quick & Steady
warm settings)
If you can not remedy problems with the machine by using the troubleshooting chart above,
please contact Customer Service at: 1-888-396-6552
Condition
Cause
Remedy
“E5” error displays
on machine or
“Error” message
displays on app.
Little or no water has been added
to the machine.
Add cold water to the
machine and let it sit and
cool for 5 min. Empty out cold
water and restart the bottle
warmer. Make sure to add
the appropriate amount
of water needed for warming.
E1, E2, E3, or E4 error
displays on machine.
Internal malfunction in machine.
Please contact customer
service before continuing to
use your machine.
Limited 1-year Warranty
The limited warranty is valid only on products bought through authorized resellers and used in the
United States and Canada. Buying through an unauthorized reseller or using this product outside
of the United States and Canada automatically voids this warranty. This warranty is available to
consumers only. You are a consumer if you own a Baby Brezza Bottle Warmer that was purchased
at retail for personal, family or household use. Except as otherwise required under applicable state
law, this warranty is not available to retailers or other commercial purchasers or owners.
We warrant that your Baby Brezza Bottle Warmer will be free of defects in material or workmanship
under normal home use for one year from the date of original purchase. Customer will be required
to present original proof of purchase in order to obtain the warranty benefits. In the event that
you do not have proof of purchase date, the purchase date for purposes of this warranty
will be the date of manufacture. If your Baby Brezza Bottle Warmer should prove to be defective
within the warranty period, we will repair it or, if we consider it necessary, replace it.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Customer Service and Warranty
If you are experiencing problems with your Baby Brezza Smart Bottle Warmer,
please call our Customer Service department at 1-888-396-6552 before returning
the product so that we can offer you our best service customized to your particular situation.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Format                          : application/pdf
Title                           : BW Instruction Manual_06-17-16
Metadata Date                   : 2016:06:17 10:33:31-04:00
Modify Date                     : 2016:06:17 10:33:31-04:00
Create Date                     : 2016:06:17 10:33:31-04:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 84
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9237 bytes, use -b option to extract)
Instance ID                     : uuid:8e917ed1-abac-954e-a1bf-59a3cb0623aa
Document ID                     : xmp.did:FB7F117407206811822AE8E440EC6664
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F97F117407206811822AE8E440EC6664
Derived From Document ID        : xmp.did:F97F117407206811822AE8E440EC6664
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:0680117407206811822A988F347876CF, xmp.iid:FB7F117407206811822ACCDF0E8AAA9F, xmp.iid:01801174072068118083CAF62E6F3A5F, xmp.iid:01801174072068118083DE332C668775, xmp.iid:F77F117407206811822ADCD7F274DD98, xmp.iid:09801174072068118083FC83D74C7BBA, xmp.iid:F77F117407206811822A842AFE243911, xmp.iid:01801174072068118083F369080D9B16, xmp.iid:078011740720681180839EB1B69770E7, xmp.iid:0180117407206811822AC636641B1CE3, xmp.iid:01801174072068118083CCEC4702C2B0, xmp.iid:FF7F117407206811822AE59E61E5EE5E, xmp.iid:01801174072068118083C2B0434B6036, xmp.iid:B10187C63A2068118083C2B0434B6036, xmp.iid:02801174072068118083C50DECFB617F, xmp.iid:F97F117407206811822AE8E440EC6664, xmp.iid:FB7F117407206811822AE8E440EC6664
History When                    : 2015:12:10 16:47:47-05:00, 2016:01:04 16:17:35-05:00, 2016:01:12 11:35:52-05:00, 2016:02:03 09:53:04-05:00, 2016:02:18 12:28:10-05:00, 2016:03:22 17:18:15-04:00, 2016:03:29 10:54:05-04:00, 2016:04:06 14:28:45-04:00, 2016:04:25 11:56:03-04:00, 2016:05:04 09:49:22-04:00, 2016:05:11 08:55:09-04:00, 2016:05:25 16:20:22-04:00, 2016:06:07 09:28:41-04:00, 2016:06:07 17:00:42-04:00, 2016:06:10 11:29:02-04:00, 2016:06:17 10:12:18-04:00, 2016:06:17 10:33:15-04:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : /Volumes/bb_share/BABY BREZZA/PRODUCT PHOTOS/BOTTLE WARMER/Bottle Warmer Renderings/Edited Images/Bottle Warmer Persp_05-10-16.psd
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 297.000304
Max Page Size H                 : 209.999929
Max Page Size Unit              : Millimeters
Font Name                       : Myriad-Roman, MyriadPro-Regular, VAGRounded-Thin, VAGRounded-Light, VAGRounded-Bold
Font Family                     : Myriad, Myriad Pro, VAG Rounded, VAG Rounded, VAG Rounded
Font Face                       : Roman, Regular, Thin, Light, Bold
Font Type                       : Type 1, Open Type, Type 1, Type 1, Type 1
Font Version                    : 001.001, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, 001.000, 001.000, 001.000
Font Composite                  : False, False, False, False, False
Font File Name                  : MyriaRom; Myriad, MyriadPro-Regular.otf, VAGRouThi; VAGRounded.t1, VAGRouLig; VAGRounded.t1, VAGRouBol; VAGRounded.t1
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.90
Page Count                      : 6
Creator                         : Adobe Illustrator CS5

EXIF Metadata provided by EXIF.tools