BainUltra EUPHONIAHS Euphonia Headset User Manual statements

BainUltra inc. Euphonia Headset statements

Contents

user manual statements

      St-Nicolas, March 11 th 2008   Ms Joanna Olszanowska Nemko Canada Inc. 303 River Road Ottawa, Ontario K1V 1H2     Object :  Declaration letter   Ms Olszanowska,   We are temporally using a separate regulatory notice to inform customers about (1) the two parts warning statement, (2) the modification statement and (3) the Class B statement.  See below for the exact wording of all statements.  We assure you that every user’s manual will have this document attached and every packages will include a manual.  As soon as possible, all three statements will be printed directly into the manual.  This procedure become necessary because the Euphonia ™ headset is too small to be able to affix a readable label with the two parts warning statement.  Best regards,     Daniel Gagnon, eng. Certification Coordinator BainUltra inc. (418) 831-3371 (236)
      Statements attached to the user’s manual    (1) the two parts warning statement,    Regulatory Notice for FCC:  This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation    (2) the modification statement   Changes or modifications not expressly approved by BainUltra inc. could void the user's authority to operate the equipment.    (3) the Class B statement   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu