Balluff BFIDU02 RFID Reader User Manual BF IDU02 Manual v 04

Balluff GmbH RFID Reader BF IDU02 Manual v 04

User Manual

BF-IDU02 RFID-Reader Company Addresses Europe, Germany, Headquarter Balluff GmbH Schurwaldstraße 9 D-73765 Neuhausen, Germany Argentina Balluff Argentina S.R.L. Echeverría 1050, 1st UF 2 1604 Buenos Aires - Florida Oeste Australia Balluff Pty Ltd. 18 Malvern Street Bayswater, 3153 Victoria Brasil Balluff Controles Elétricos Ltda. Rua Francisco Foga, 25 ,Distrito Industrial CEP 13280.000 – Vinhedo – SP Canada Balluff Canada Inc. 2840 Argentia Road, Unit 2 Mississauga, Ontario L5N 8G4 China Balluff (Shanghai) Trading Co. Ltd. No.800 Chengshan Rd, 8F, Building A, Yunding International Commercial Plaza 200125, Pudong, Shanghai Japan Balluff Co., Ltd. Aqua Hakusan Bldg. 9F 1-13-7 Hakusan, Bunkyo-ku, Tokyo 113-0001 Mexico Balluff de México S.A. de C.V. Anillo Vial II Fray Junipero Serra No. 4416; Colonia La Vista Residencial CP 76232 Delegación Epigmenio González, Querétaro USA Balluff Inc. 8125 Holton Drive, Florence Kentucky 41042-0937
BF-IDU02 RFID-Reader Operating Guide Purpose of the Device The BF-IDU02 device is intended to read and write "EPC Global Class 1 Gen2" compliant data carriers (so called tags) via country dependent UHF radio frequencies. Check that you have the right device variant This UHF system consists of a radio frequency unit and an integrated antenna according to specifications and may only be operated within the specified countries subject to all applicable national legal regulations and standards. Check that the type label contains the correct type approval symbol for your country. ► When using the UHF system in the European Community, the provisions in ETSI standard 302 208 apply. ► When using the UHF system in the USA, the directives of the FCC, Part 15 B and 15 C, apply. ► When using the UHF system in Canada, the directives of the IC, RSS-210 apply. ► When using the UHF system in Mexico, the directives of the SCT, NOM-121-SCT1-2009 apply. ► When using the UHF system in Argentina, the directives of Resolución SC 729/80 and SC 784/87 apply. ► When using the UHF system in Brazil, the directives of the ANATEL, 506/2008 and 442/2006 apply. ► When using the UHF system in China, the directives of the RFID National Standard and GB 9254 apply. ► When using the UHF system in Japan, the directives of "Radio Law" and ARIB T106 apply. ► When using the UHF system in Australia, the directives of the Radiocommunications Class License 2000 (Item 32A) apply.
BF-IDU02 RFID-Reader Connecting the Device The device has to be connected to one of the head connectors "H1" .. "H4" of a Balluff BIS V control unit via standard 4-wire cable with M12 industry connectors. The control unit delivers power supply and controls the device over this connection. Make an additional ground connection to the Functional Ground terminal (Symbol ) either directly or using an RC combination to ground. The control unit itself needs to be connected to a power supply and the customer's PLC unit. See the BIS V manual for details. Mounting Before operating, the device has to be fixed mounted with at least 2 screws of M4 or M5 size in mounting holes at back side (see image). The BF-IDU02 device may be mounted in any direction, the operating direction of the integrated antenna is towards the front containing the "BIS VU Identification Systems" label. Optional mounting plates are available for installing the device. The antennas of the identification system BIS U transmit ultra-high frequency electromagnetic waves. People should not remain within close range of the UHF antenna for long periods (several hours). When selecting the installation position for the BF-IDU02 device, make sure that the minimum distance between the UHF antenna and the workplace is 25 cm. BF-IDU02 BIS V-6xxx
BF-IDU02 RFID-Reader Setup and Operation The BF-IDU02 device will operate when the BIS V control unit receives read or write commands from the connected PLC. See the manual of BIS V control units for how to send commands to the control unit. The transmission power may be set up with Service Software e.g. "Balluff UHF Manager" up to the specified maximum to control the read and write range of the device. Status Indicators The device will show its status using the 4 LEDs at the corners of the housing. In normal operation state the meaning of these lights are as follows: ► Green light "Power" indicates that the device is connected to the control unit and ready to operate. ► Red light "Status" (permanent) indicates that the device's temperature is outside limits, probably because the ambient temperature is too high or the device is defective. ► Red light "Status" (flashing) indicates that the devices settings are not initialized correctly. Please contact Service. ► Blue light "RF active" indicates that the device has turned radio frequency transmission on and tries to scan for tags or write or read data over the air. ► Orange light "Tag present" indicates that at least one UHF EPC Global tag could be found by the device. The light will stay on for at least 3 seconds after a successful scan. Electrical Data Operating voltage Vs 19.2…28.8 V DC Current draw (at 24 V DC) ≤ 200 mA ETSI-Version: Operating Frequency 865.0 .. 868.0 MHz Maximum Transmit Power 25 dBm (320 mW) ERP FCC/IC-Version (also Argentina, Mexico): Operating Frequency 902 .. 928 MHz Maximum Transmit Power 27 dBm (0,5 W) EIRP Brazil Version: Operating Frequency 915 .. 928 MHz Maximum Transmit Power 27 dBm (0,5 W) EIRP China Version: Operating Frequency 920.5 .. 924.5 MHz Maximum Transmit Power 25 dBm (320 mW) ERP Japan Version: Operating Frequency 916.7 .. 920.5 MHz Maximum Transmit Power 27 dBm (0,5 W) EIRP Australia Version: Operating Frequency 920 .. 926 MHz Maximum Transmit Power 27 dBm (0,5 W) EIRP Maximum Read Range 1000 mm Antenna Beam Opening Angle 90° (horizontal/vertical ) Antenna Polarization Circular LH Mechanical Data Housing material Metal / ABS / PC
FEDERALCOMMUNICATIONSCOMMISSIONINTERFERENCESTATEMENTThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:‐Reorientorrelocatethereceivingantenna.‐Increasetheseparationbetweentheequipmentandreceiver.‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp. CAUTION:Anychangesormodificationsnotexpresslyapprovedbythegranteeofthisdevicecouldvoidtheuser'sauthoritytooperatetheequipment.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.RFexposurewarning  Thisequipmentmustbeinstalledandoperatedinaccordancewithprovidedinstructionsandtheantenna(s)usedforthistransmittermustbeinstalledtoprovideaseparationdistanceofatleast20cmfromallpersonsandmustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.End‐usersandinstallersmustbeprovidewithantennainstallationinstructionsandtransmitteroperatingconditionsforsatisfyingRFexposurecompliance.
Canada,IndustryCanada(IC)NoticesThisdevicecomplieswithCanadalicence‐exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.Canada,avisd'IndustryCanada(IC)LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:(1)l'appareilnedoitpasproduiredebrouillage,et(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrelefonctionnement.RadioFrequency(RF)ExposureInformationTheradiatedoutputpoweroftheWirelessDeviceisbelowtheIndustryCanada(IC)radiofrequencyexposurelimits.TheWirelessDeviceshouldbeusedinsuchamannersuchthatthepotentialforhumancontactduringnormaloperationisminimized.ThisdevicehasalsobeenevaluatedandshowncompliantwiththeICRFExposurelimitsundermobileexposureconditions.(antennasaregreaterthan20cmfromaperson'sbody).Informationsconcernantl'expositionauxfréquencesradio(RF)Lapuissancedesortieémiseparl’appareildesansfilestinférieureàlalimited'expositionauxfréquencesradiod'IndustryCanada(IC).Utilisezl’appareildesansfildefaçonàminimiserlescontactshumainslorsdufonctionnementnormal.Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition à des appareils mobiles (antennes sont supérieures à 20 cm à partir du corps d'une personne).

Navigation menu