Baltech 1055800101A03C Inductive Tag Reader User Manual ACCESS45 5 232 LEGP LB Operation Manual

Baltech AG Inductive Tag Reader ACCESS45 5 232 LEGP LB Operation Manual

User Manual

User Manual0558A02C-001 – DC AnalyserREVISION 1.0, 2007-11-07OperationThe DCAnalyser is used for analysis of LTO data cartridges. It contains on the one hand a RFID read-/write-device (short: reader) which is compatible to read LTR labels embedded in LTO data cartridges and one the other hand an integrated bar code scanner to read bar code labels applied on LTO data cartridges. All functions of the DC Analyser can be controlled over a USB interface which allows data exchange with a host computer. This includes:–functions to control the RFID reader: e.g. switch on / off RF field, read / write to a LTR label.–functions for bar code scanner: enable / disable scanner, read labels.–functions for controlling the two LED's on the front of the housing. –system functions: e.g. status of deviceTo ensure full operation it is important that a external wall adapter is used (USB self powered).To process a cartridge it is important that it is applied as shown on the front foil of the device,the antenna of the reader is located as shown on the picture (green rectangle):
Hint: the reader generates a magnetic field with the frequency of 13.56MHz which is influenced by any electrically conductive material in close proximity to the antenna. A minimum of 10 cm is required to ensure that there will be no significant degradation of the performance in terms of read range and reliability. SpecificationsDimensions:–Length: 252 mm–Width: 112 mm–Height: 80 mmHost interface: USB via virtual COM-Port , 115200 baud, 8N1Power supply: 5VDC, +-5%Current consumption: Idle (typ.): 70mABarcode scanner on (typ.): 135mARF field on (typ.): 160mAmax: 500mA Operating temperature range: +5..+45° CStorage temperature range: -20°C..+70°CThermal shock: 30°C/min maximum dT/dtRelative humidity: 5% .. 95% (not condensing)Weight: 310gAccessories:–USB Cable–AC/DC Adapter Input: 100-240V ACOutput: 5V DC / 1.0ACaution: only the original wall adapter should be used to ensure full operation. RF Characteristics:–Operating frequency: 13.56 Mhz–Data transmission modulation reader to card: AM–Data transmission modulation card to reader: AM/load modulationGeneral regulatory requirementsFCC:Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Class 1 Laser:
–Product complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.50, dated July 26, 2001.–EN60825-1:1994+ A1:2002 +A2:2001–IEC60825-1:1993+ A1:1997 +A2:2001–Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.CLASS 1 LASER PRODUCTLASER KLASSE 1APPAREIL A LASER DE CLASSE 1

Navigation menu