Baltech 1055800101A03C Inductive Tag Reader User Manual ACCESS45 5 232 LEGP LB Operation Manual

Download:
Mirror Download [FCC.gov]
Document ID	876849
Application ID	pb/FfNLUmpIfG/rcTl6T+g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.93kB (561641 bits)
Date Submitted	2007-12-07 00:00:00
Date Available	2007-12-07 00:00:00
Creation Date	2007-11-08 14:28:55
Producing Software	OpenOffice.org 2.0
Document Lastmod	0000-00-00 00:00:00
Document Title	ACCESS45-5-232-LEGP-LB Operation Manual
Document Creator	Writer
Document Author:	juergen roesch

User Manual
0558A02C-001 – DC Analyser
REVISION 1.0, 2007-11-07
Operation
The DCAnalyser is used for analysis of LTO data cartridges. It contains on the one hand a
RFID read-/write-device (short: reader) which is compatible to read LTR labels embedded in
LTO data cartridges and one the other hand an integrated bar code scanner to read bar code
labels applied on LTO data cartridges. All functions of the DC Analyser can be controlled
over a USB interface which allows data exchange with a host computer. This includes:
–
functions to control the RFID reader: e.g. switch on / off RF field, read / write to a LTR
label.
–
functions for bar code scanner: enable / disable scanner, read labels.
–
functions for controlling the two LED's on the front of the housing.
–
system functions: e.g. status of device
To ensure full operation it is important that a external wall adapter is used (USB self
powered).
To process a cartridge it is important that it is applied as shown on the front foil of the device,
the antenna of the reader is located as shown on the picture (green rectangle):
Hint: the reader generates a magnetic field with the frequency of 13.56MHz which is
influenced by any electrically conductive material in close proximity to the antenna. A
minimum of 10 cm is required to ensure that there will be no significant degradation of the
performance in terms of read range and reliability.
Specifications
Dimensions:
–
Length:
–
Width:
–
Height:
252 mm
112 mm
80 mm
Host interface:
USB via virtual COM-Port , 115200 baud, 8N1
Power supply:
5VDC, +-5%
Current consumption:
Idle (typ.):
Barcode scanner on (typ.):
RF field on (typ.):
max:
Operating temperature range:
+5..+45° C
Storage temperature range:
-20°C..+70°C
Thermal shock:
30°C/min maximum dT/dt
Relative humidity:
5% .. 95% (not condensing)
Weight:
310g
70mA
135mA
160mA
500mA
Accessories:
–
USB Cable
–
AC/DC Adapter
Input:
100-240V AC
Output:
5V DC / 1.0A
Caution: only the original wall adapter should be used to ensure full operation.
RF Characteristics:
–
Operating frequency:
–
Data transmission modulation reader to card:
–
Data transmission modulation card to reader:
13.56 Mhz
AM
AM/load modulation
General regulatory requirements
FCC:
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Class 1 Laser:
–
–
–
–
Product complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No.50, dated July 26, 2001.
EN60825-1:1994+ A1:2002 +A2:2001
IEC60825-1:1993+ A1:1997 +A2:2001
Class 1 Laser devices are not considered to be hazardous when used for their intended
purpose. The following statement is required to comply with US and international
regulations:
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
Title                           : ACCESS45-5-232-LEGP-LB Operation Manual
Author                          : juergen roesch
Creator                         : Writer
Producer                        : OpenOffice.org 2.0
Create Date                     : 2007:11:08 14:28:55+01:00

EXIF Metadata provided by EXIF.tools