BandRich 30SK58 LTE M2M & Vehicle Mount Router User Manual BandLuxe FieldPerfect

BandRich Inc. LTE M2M & Vehicle Mount Router BandLuxe FieldPerfect

User Manual

User Manual BandLuxe K530 Series LTE M2M & Vehicle Mount Router
1 Table of Contents Package Contents .......................................................................... 2 Features .................................................................................................................. 2 Hardware Overview ................................................................................................. 3 Connection ...................................................................................... 5 Appendix B: Specifications ........................................................... 6 Federal Communications Commission .................................................................... 8
Package Contents 2 Package Contents Thank you for your purchase of this LTE M2M & Vehicle Mount Router. This product is designed to access the Internet via 4G technology and share the bandwidth through a Wi-Fi network. It is easy to configure and operate even for non-technical users. This manual contains instructions for installing and configuring the product. Read the manual carefully before you use the product, so that you can fully exploit the product functions. Package Contents K530 series LTE M2M & Vehicle Mount Router Power Adaptor AC cord Cable MOUNT_ACCESSORY (M4) Features  LTE Cat3 and 3GPP Rel0 compatible with HSPA+ or EVDO fallacksupport.  High performance module and router platform targeted for m2m and mission critical applications.  IP64 and MIL 810 ruggedized design for extreme environments.  Operation temp: -20~70°C (-4~158°F), 12V or 24V DC, accepting 9~32V voltage swing.  5 SMA antenna ports- 2x LTE/HSPA+/EVDO, 2x WiFi, 1xGPS (support 3.3V DC active antenna).  802.11 b/g/n 2x2 MIMO wireless networking.  6 x LEDs status indication, 2x Ethernet ports, 1x USB port.  IPSec VPN client and VPN pass-through modes.  Composite GPS and Glonass for quicker positioning fix and better accuracy.
Package Contents 3 Hardware Overview 1 5 4G External Antenna Ports Connect 4G External Antennas. 2 4 WiFi External Antenna Ports Connect WiFi External Antennas 3 GPS External Antenna Port This connects a GPS antenna to the device. 6 Reset Switch Restore to factory default settings. 7 Power Port This connects power to the device. 8 SIM Card Slot Embedded SIM as default, also 1 x SIM (SIM/USIM) slot for external plug in for back up. 9 USB Port Connect a Windows PC to it to monitor and configure the device. 10 RJ-45 Ports This RJ-45 connector connects a standard Ethernet cable to the device.
Package Contents 4 11 LED indicators These show the device’s operating status. 11-1 GPS LED (Blue) GPS on 11-2 LAN1 LED (Blue) LAN port 1 transmiting. 11-3 Signal Strength LED (Blue) Good (Green) Normal (Red) Bad 11-4 WiFi LED (Blue) WiFi on 11-5 LAN2 LED (Blue) LAN port 2 transmiting. 11-6 Network Status LED (Blue) LTE connection (Green) 3G connection (Red) Error
Connection 5 Connection 1. Insert your SIM card into the slot on the router, making sure the SIM card orientation matches the SIM card slot, as shown in the picture. 2. Connect the power adaptor to the router and connect it to an outlet. 3. One of the following two methods can be chosen to link your PC with the Router. Wireless Connection(for Windows) To connect your PC to the Router via WiFi, in Microsoft Windows, go to Control Panel > Network Connections. Right click on Wireless Network Connection and choose View Available Wireless Networks. Select default SSID [BR_LTE_xxxx] and enter default password (Last 8 digits of IMEI). Click Connect. The “xxxx” corresponds with the last 4 digits of MAC address. Wired Connection To connect your PC to the Router via an Ethernet cable, connect one end of the cable to one of the four LAN ports on the Router, and another end of the cable to an Ethernet port on your computer. 4. The router uses a web-based configuration utility. To access the configuration utility, open a browser and enter the IP address (http://192.168.1.1) for the Router in your browser’s address bar. Enter the router Username (admin) and Password (admin), and then click .
Appendix B: Specifications 6 Appendix B: Specifications Note: Specifications are subject to change without notice. WLAN 802.11 b/g/n (2x2 MIMO) Cellular Modem Embedded, 3GPP Rel 9, LTE FDD&TDD/eHRPD/EVDO/CDMA Dimension (LxWxH, mm) 160 x 94 x 44 Weight (g) 474 Interface Reset Button Yes RJ45 Ports 2 x RJ-45, 10/100 LAN ports DC Power Jack 12V or 24V, accepting 9~32 V voltage swing SIM Slot Embedded SIM as default, also 1 x SIM slot for external plug in for back up USB Port 1 x USB port, for USB client device plug in only. K530S serve as USB host. Connectivity and Data Speed 4G LTE Band Band 25, Band 26, Band 41 LTE Data Rate FDD Downlink up to 100Mbps, Uplink up to 50Mbps TDD Downlink up to 68Mbps, Uplink up to 17Mbps (in configuration 3) LTE Bandwidth Up to 20 MHz 3G EVDO/CDMA Band BC0, BC1, BC10 WLAN 802.11 b/g/n, 2x2 MIMO Antenna Cellular embedded main antenna No Cellular embedded diversity antenna No Cellular external main antenna port Yes SMA type Cellular external diversity antenna port Yes SMA type WiFi antenna No Embedded WiFi external antenna port 2 x SMA ports GPS antenna port Yes SMA type, supporting 3.3V DC Active Antenna Router Features Routing Static Routing, Dynamic Routing (RIP, BGP, OSPF) Security Multiple VPN pass-through (IPSec, PPTP, L2TP), Stateless and SPI Firewall NAT-NAPT Single Port Forwarding, Port Range Forwarding, Port Range Triggering, Port Filtering, IP Filtering, DMZ, UPnP, Multicast Pass-Through VPN IPSec, SSL DNS DNS Agent, DDNS Other features IPv4 and IPv6, TCP, UDP, ICMP, ARP, DHCP Server/Client, HTTP/HTTPs, NTP, ALGs Wireless LAN 802.11b data rate 1/2/5.5/11 Mbps 802.11g data rate Up to 54 Mbps 802.11n data rate Up to 300 Mbps Security Types WPA/WPA2 AES/TKIP Encription, WPA/WPA2 PSK, WPA/WPA2 Enterprise, None/64/128 bits WEP Encryption, open system authentication. Device Unique Default Encryption Key Such unique key is linked to IMEI address of the device Channel Selection Auto or Manual
Appendix B: Specifications 7 Other features SSID broadcast disable, Dual SSID, Access control (MAC filtering), WLAN on/off software switch. Status Indication 6x LED Display #1 cellular technology (Blue: LTE, Green: EVDO/CDMA, Red: SIM error or service failure) #2 signal strength (tri-color) #3 LAN 1 #4 LAN 2 #5 GPS #6 WiFi Software Features Web GUI Yes, Browser supported: IE, Firefox, Safari, Chrome Web GUI Language Support English Connection Status in Web GUI Network name, Signal strength, Roaming indication, Radio technology, Connection status, Connection time, Connection Statistics. Connection management Connection on demand, Connection when available, Auto APN matching with USIM, APN database update through browser-based GUI, APN profile, PIN management, Preferred radio NW type selection System protection Password protected administrator and user access authority (provisioning, configuration, authentication). GNSS Supports GPS and Glonass composite location data for remote server and local access Support FW version upgrade Yes Device Management TR-069, OMA-DM, Remote GUI Log-in Environment Operation Temperature -20oC to 70oC (-4oF to 158oF) Storage Temperature -40oC to 85oC (-40oF to 1850F) Operating Humidity 10% to 85% Non-Condensing Storage Humidity 5% to 90% Non-Condensing Certitification & Conformance RoHS, IP64, MIL 810-G, FCC, Sprint Certification
Appendix B: Specifications 8 Appendix C: Important Safety Information and Glossary Federal Communications Commission NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operate din a commercial environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

Navigation menu