BandRich 565R66 LTE FDD&TDD; WLAN VoIP Home Router User Manual

BandRich Inc. LTE FDD&TDD; WLAN VoIP Home Router Users Manual

Users Manual

Download: BandRich 565R66 LTE FDD&TDD; WLAN VoIP Home Router User Manual
Mirror Download [FCC.gov]BandRich 565R66 LTE FDD&TDD; WLAN VoIP Home Router User Manual
Document ID2307495
Application IDUBiaEu8BgAfBgUAbOZkGCQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize182.89kB (2286083 bits)
Date Submitted2014-06-26 00:00:00
Date Available2014-12-23 00:00:00
Creation Date2017-10-22 06:04:40
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-22 06:04:40
Document TitleMicrosoft Word - BandLuxe R565 User Manual_20140626
Document CreatorPScript5.dll Version 5.2.2
Document Author: sandy

User Manual
Ba ndLuxe
R5 6 5
LT E WLAN VoI P H om e
Rout e r
Table of Contents
Features .................................................................................................................... 3
Hardware Overview ................................................................................................... 4
Status ..................................................................................................................... 10
Overview .............................................................................................................................11
System Log .......................................................................................................................... 12
Traffic Monitor .................................................................................................................... 13
Mobile Internet ................................................................................................................... 13
System .................................................................................................................... 15
System ................................................................................................................................ 15
General Settings ......................................................................................................................... 15
Language and Style ..................................................................................................................... 16
Administration..................................................................................................................... 17
Backup / Flash Firmware ...................................................................................................... 18
Download backup ....................................................................................................................... 18
Reset to defaults ......................................................................................................................... 19
Restore backup ........................................................................................................................... 19
Reboot................................................................................................................................ 20
Services .................................................................................................................. 21
VoIP................................................................................................................................... 21
Setting ...................................................................................................................................... 21
Dynamic DNS ...................................................................................................................... 22
Network.................................................................................................................. 23
Interfaces ............................................................................................................................ 23
Mobile Internet ................................................................................................................... 23
Network Settings ........................................................................................................................ 24
Auto APN Information ................................................................................................................. 25
APN Profile Settings .................................................................................................................... 25
Reset Modem ............................................................................................................................. 25
Scenario 1: No mobile internet service ......................................................................................... 26
Scenario 2: Mobile internet service pending ................................................................................. 26
Scenario 3: Mobile internet service enabled ................................................................................. 27
Scenario 1: SIM lock absent ......................................................................................................... 29
Scenario 2: SIM lock present ........................................................................................................ 29
Router ................................................................................................................................ 30
Router IP .................................................................................................................................... 30
DHCP Service.............................................................................................................................. 31
Active DHCP Leases ..................................................................................................................... 31
Static Leases ............................................................................................................................... 32
Static Routing ............................................................................................................................. 33
Routing and Redirection Service................................................................................................... 34
VPN Passthrough ........................................................................................................................ 34
WiFi ................................................................................................................................... 35
Advanced Settings ...................................................................................................................... 37
General Setup ............................................................................................................................ 38
Wireless Security ........................................................................................................................ 38
MAC‐Filter ................................................................................................................................. 42
Advanced Settings ...................................................................................................................... 43
WPS Settings .............................................................................................................................. 43
Firewall............................................................................................................................... 45
Single Port Forward .................................................................................................................... 45
Port Trigger ................................................................................................................................ 47
Firewall ...................................................................................................................................... 49
Internet Filter ............................................................................................................................. 49
Web Filters................................................................................................................................. 50
Network Filtering........................................................................................................................ 51
Port Range Forward .................................................................................................................... 53
UPNP .................................................................................................................................. 54
Advanced ................................................................................................................ 55
Diagnostics.......................................................................................................................... 55
Ping ........................................................................................................................................... 55
Traceroute ................................................................................................................................. 55
NS Lookup .................................................................................................................................. 56
SMS ........................................................................................................................ 57
Setting ....................................................................................................................................... 61
Backup....................................................................................................................................... 61
Help ....................................................................................................................... 63
Logout .................................................................................................................... 63
Europe – EU Declaration of Conformity ...................................................................... 74
Federal Communication Commission Interference Statement....................................... 75
Glossary .................................................................................................................. 77
Package Contents
Package Contents
Thank you for your purchase of this LTE WiFi Router. This product is designed to
access the Internet via 4G technology and share the bandwidth through a Wi‐Fi
network. It is easy to configure and operate even for non‐technical users. This manual
contains instructions for installing and configuring the product. Read the manual
carefully before you use the product, so that you can fully exploit the product
functions.
Package Contents
R565 LTE Home Router
Power Adapter
Features
 R565 LTE Home Router
 Wi‐Fi Protected Setup (WPS) Support
 Uplink up to 50 Mbps
 Downlink up to 100Mbps
 Supports Wi‐Fi 802.11 b/g/n
 Supports LAN Ethernet Ports
Package Contents
Hardware Overview
1 SIM Card Slot
Insert SIM/USIM. Push‐push type.
2 Power Switch
Switch on/off the router.
3 Signal Strength
LED/WPS/Reset
button
Short press (1 second): Enable signal strength
indication.
Press for 3 seconds (< 10 seconds): Active WPS.
Long press (>10 seconds): Restore to factory default
settings.
4 LAN PortPower
Receptor
Connect a LAN device as needed.Receptor for the
Power Adapter.
5 RJ11LAN Port
Connect a LAN device as needed.n analog phone.
6 Power Receptor
Receptor for the Power Adapter.
7 Network Status LED
(Blue) 4G LTE
(Green) 3G HSPA+/HSPA/UMTS/EVDO
(Pink/Purple) 2G EDGE/GPRS/GSM
(Red) No signal, SIM error, Service failure (no
IP) ; Flashing when firmware is being updated
8 Power LED
Solid when power is on;
/ Signal Strength
Package Contents
LEDFlashing when firmware is being updated
9 WiFi LED
Solid when WiFi is on; Flashing during WiFi data
transmission / Signal Strength LED
10 WPS LED
Flashing when WPS is in use /Signal Strength LED
11 SMS LED
Flashing when there is unread SMS / Signal Strength
LED
12 Voice LED
Solid when VoIP is ready to make/receive call
Flashing when attaching to the VoIP server
13 Signal Strength Bars After clicking the Signal Strength LED/WPS/Reset
Reading
button once, Signal Strength LEDs show current
signal strength.
Strong signal: five LEDs
Poor signal: zero LEDsShort press on Signal
LED/WPS/Reset button, Signal Strength LEDs show
current signal strength.
Strong signal:
Poor signal:
*To send and receive SMS may incur additional fees.
Contact your carrier for information about service availability and plans.
Installation
Installation
1. Connect the power Adapter to the Router(
) and connect it to an outlet.
2. Insert your SIM card into the slot on the Router, making sure the SIM card
orientation matches the SIM card slot, as shown in the picture.
3. Slide the power switch (
) to ON.
4. One of the following two methods can be chosen to link your PC with the Router.
Installation
A. Wireless Connection (for Windows)
To connect your PC to the Router via WiFi, in Microsoft Windows, go to Control
Panel > Network Connections. Right click on Wireless Network Connection and
choose View Available Wireless Networks. Select default SSID [BR_LTE_xxxx]
and enter default password (WPA key, refer to label on the Router’s backside).
Click Connect. The “xxxx” corresponds with the last 4 digits of MAC address.
Wireless Connection (for Mac)
To click the
networks.
on the upper side of the screen to view available wireless
B. Wired Connection
To connect your PC to the Router via an Ethernet cable, connect one end of the
cable to one of the four LAN ports on the Router, and another end of the cable
to an Ethernet port on your computer.
Installation
5. The router uses a web‐based configuration utility. To access the configuration
utility, open a browser (ex: Mozilla, Firefox, etc.) and enter the IP address
(http://192.168.1.1) for the Router in your browser’s address bar.
Enter the router Username (admin) and Password (admin), and then click
Using Web-based Management
Using Web‐based Management
This chapter will guide you on how to configure your router via the web‐based utility.
Login
1. Launch a web browser (e.g Mozilla Firefox).
2. In the address bar, enter http://192.168.1.1, then press Enter.
3. On the opening screen, enter the username (admin) and password (admin).
4. Click Login.
5. Click one of the menu, submenu, and/or setting tabs to configure the system.
Additionally, the status area displays current wireless network information and
setting‐related messages (e.g. the message Unapplied Change appears whenever
new settings are temporarily stored in the router without being applied, which
will remind you to click the
button).
status area
menu
submenu
setting
Note:
If SIM Card’s PIN verification is needed, select Network > Mobile Internet >
U/SIM PIN Management.
Enter the PIN code into text box of “PIN Code Verification”. Click Verify. Mobile
internet access will be enabled shortly after.
Using Web-based Management
Status
This menu displays various status of the router. The associated submenu items are:
Overview, System Log, VnStat Traffic Monitor, and Mobile Internet.
10
Using Web-based Management
Overview
The Overview submenu renders complete statistics for the router.
System
Displays system information: router model name, router firmware version, modem
11
Using Web-based Management
firmware version, phone number (MDN), ICCID, MIN (MSID), PRL version, IMEI, MEID,
and local time.
Network
Displays current network connection information of IPv4 WAN and/or IPv6 WAN: type
of network assignment (e.g. DHCP), network address, netmask, gateway, DNS
addresses 1 & 2, and time connected since the establishment of the current mobile
internet connection.
DHCP Leases
Display DHCP lease information for each client: hostname, IPv4 address, MAC address,
and lease time remaining.
Local Network
Displays local network information: local MAC address, router IP address, subnet
mask, DHCP server, DHCP server change, start IP address, IP and address range
System Log
The System Log submenu tracks system activities after power on.
12
Using Web-based Management
Traffic Monitor
Statistics
Mobile Internet
The Mobile Internet submenu displays mobile internet statistics.
Signal Quality
Displays signal strength of current mobile internet connection in dBm.
U/SIM Status
Displays current SIM card status:
a) Read SIM Fail – No valid SIM card is inserted
13
Using Web-based Management
b) PIN Disable(Verified) – PIN protection is disabled while the SIM card status is
verified; mobile internet service is available with this status.
c) PIN Enable(No Verified/Retries:#) – PIN protection is enabled while the SIM card
verification is pending (whereas # is the number of allowed PIN verifications
remaining before SIM lock occurs).
d) PIN Enable(Verified) – PIN protection is enabled while the SIM card status is
verified; mobile internet service is available with this status.
Registered Network
a) Network Name – name of your mobile internet service provider
b) Network Technology – mobile internet communication signal type.
Ex: WCDMA (3G) and LTE (4G).
c) Home/Roaming – displays current network roaming status:
Home indicates mobile internet connection to the home location where the SIM card
service is registered. Roaming indicates the extended mobile internet connection
service in a location different from the home location where the SIM card service is
registered. An example of roaming is when you travel abroad.
Internet Connection
Displays information of current internet connection:
Connection Type, Internet IP Address, Gateway, and DNS 1/2.
14
Using Web-based Management
System
This menu is for system information and configurations.
System
System Properties
Click either the “General Settings” or “Language and Style” tab to configure their
respective settings.
General Settings
Local Time – Displays current local time. To synchronize local time with the browser,
click
Hostname – Enter the desired hostname in this check field.
and select the
Time Zone – Sets the time zone associated with this router. Click on
desired region.
15
Using Web-based Management
Language and Style
Language – Sets the desired display language and style of the router. Click
select the desired display language and style.
and
Time Synchronization
Enable NTP client: Click the checkbox to enable/disable. With this option enabled,
two more options will appear– “Provide NTP server” and “NTP server candidates”.
NTP server candidates 1/2: Enter the desired server candidates here.
Remote System Log
Router LAN client IP address: Displays the client IP address of the router LAN.
Server port: Displays port number of the server.
16
Using Web-based Management
Administration
Router Password
Login password of the router can be changed here. Enter the new password in the
‘Password’ field, and enter the same password once again in the ‘Confirmation’ field.
Remote Access
This field specifies whether or not to allow remote access of this router.
. The
After changing password and/or specifying remote access, click
screen will display a confirmation message after successful password change.
17
Using Web-based Management
Backup / Flash Firmware
Backup / Restore
Download backup
Here you can backup all current settings of the router to a TAR archive file on your
. A dialog window will prompt
computer or mobile device. Just click
you to open or save the archive file. Depending on the browser that you are using,
the TAR file may be saved in the system download folder or a location of your choice.
18
Using Web-based Management
Reset to defaults
Here you can restore the router to its original factory settings. Just click
and a dialog message will appear to indicate the factory reset process. After
completion of the reset process, the router will automatically reboot and return to its
initial login prompt.
Restore backup
Here you can restore router settings previously saved as a TAR archive file on your
to find and select the previously
computer or mobile device. Just click
saved TAR archive file, and then click ‘Open’. Confirm that the TAR filename appears
beside the
button and click
completion of backup restoration.
. The system will reboot after
Flash new firmware image
This option allows you to upgrade this router with the updated firmware image. Just
click
to find and select the firmware image file, and then click ‘Open’.
Confirm that the firmware filename appears beside the
. The system will reboot after successful upgrade.
button and click
Flash new module firmware image
This option allows you to upgrade this router with the updated module firmware
image. Just click
to find and select the firmware package file, and then
click ‘Open’. Confirm that the firmware filename appears beside the
. The system will reboot after successful upgrade.
button and click
Flash new ipkg package
This option allows you to upgrade this router with the updated IPKG package. Just
click
to find and select the IPKG package file, and then click ‘Open’.
Confirm that the IPKG package filename appears beside the
click
. The system will reboot after successful upgrade.

button and
Warning: Upgrading firmware may take a few minutes; do not turn
off the power or press the Reset button during upgrade.
19
Using Web-based Management
Reboot
Click ‘Perform reboot’ to restart the router.
20
Using Web-based Management
Services
VoIP
The VoIP submenu allows you to configure and use VoIP (Voice over Internet
Protocol). To use VoIP with your router, connect your landline telephones to the
TEL ports, then configure the Line 1 / Line 2 settings below with configuration
settings obtained from your VoIP service provider. Click Apply after setting up
each VoIP telephone line. Once the settings have been properly configured,
you can make/receive a call using the connected landline telephone.
Line 1 / Line 2
Setting
User Name*:
Enter the user name (registered with the SIP server)
of your VoIP account.
Password*:
Enter the password of your VoIP account.
User Account*:
Enter the user phone number of your VoIP account.
Display Name*:
Enter the name to be displayed on the VoIP network.
*This information needs to be provided by the VoIP service provider.
21
Using Web-based Management
Dynamic DNS
The Services menu hosts configuration options for DDNS (Dynamic Domain Name
Service), which is a system that allows the domain name data held in a name server
to be updated in real time. It allows an Internet domain name to be assigned to a
computer with a varying (dynamic) IP address. Before you can use this feature, you
need to sign up for DDNS with a DDNS provider, www.dyndns.org or www.TZO.com.
Enable: Check or un‐check this box to enable or disable DDNS.
Service: Specifies the DDNS service URL. From the drop‐down list, click
an URL from the list.
Hostname: Enter the hostname for your DDNS account.
Username: Enter the username for your DDNS account.
Password: Enter the password for your DDNS account.
22
and select
Using Web-based Management
Network
Interfaces
The Interfaces submenu allows interface configurations of different networks
connected to this router. The configuration items are the same for each network with
different default settings.
Interface Overview
Here you can see the brief network status summary for LAN (local area network) and
WAN (wide area network).
Mobile Internet
The Mobile Internet submenu is for setup and adjustment of mobile internet
connection and furthermore has four setting tabs: WWAN Setting, U/SIM PIN
23
Using Web-based Management
Management, SIM Management, and Preferred Network.
WWAN Setting
Network Settings
24
Roaming
Connection:
Enables or disables current roaming setting.
APN Update:
Displays the current APN (Access Point Name) version. To
get the latest version of APN, click
APN:
‘Auto’ – Uses automatic APN profile settings for network;
this is the default APN setting.
‘Manual’ – Allows the manual choice of APN Profile Settings
for network.
Using Web-based Management
Profile Selection:
This item appears when APN is set to ‘Manual’.
Auto APN Information
This section displays automatic APN information.
APN Profile Settings
For Advanced Users
This section allows you to establish your own APN profile settings.
To establish a new APN profile, type in a new APN profile name in the text box and
click
Enter the APN, username, and password. Click
Reset Modem
Click Perform reset to reset this router to its factory default settings.
25
Using Web-based Management
UICC/SIM PIN Management
This submenu features configurable items that are dependent on the router’s mobile
internet status, as detailed below.
Scenario 1: No mobile internet service
Without a valid SIM card inserted into the router, the Verify dialog will show the
following SIM card status:
Here the Verify dialog shows SIM status as “Read SIM Fail”, meaning that no valid SIM
card is inserted.
Scenario 2: Mobile internet service pending
If a valid SIM card is inserted into the router requiring PIN code verification, the Verify
dialog will show the following SIM card status:
Here the Verify dialog shows the SIM status as “No Verified/Retries:3”, meaning that a
valid SIM card is inserted with PIN code verification pending. Enter your SIM card
verification code in the text box of “PIN Code verify:”, and then click
. Once
26
Using Web-based Management
the PIN code verification is finished, the router is ready to use the SIM card’s
associated mobile internet access, and the top right status area will be updated
accordingly.
Operator Name:
Displays the name of the internet service provider
WiFi:
Shows the active WiFi SSID of this router
Counter:
Shows number of clients currently connected to the active
SSID
Roaming Status:
Displays current roaming status
(Carrier) Signal:
Displays strength of the indicated signal type (Carrier)
For example:
1. Without mobile internet connection, the display will be
(no carrier, no signal).
2. If WCDMA (3G) mobile internet connection is
established, the display will be
(WCDMA
carrier, excellent signal strength).
Scenario 3: Mobile internet service enabled
If a valid SIM card is inserted into the router with PIN code verified, the configuration
dialog will be ‘Setting’ and/or “Change PIN” to allow further SIM card management
after making changes):
(click
27
Using Web-based Management
Setting
SIM Status:
Shows current SIM card status.
“PIN Enable” means that the SIM card is enabled for mobile
internet access.
“PIN Disable(Verified/Retries:#)” means that the SIM card is
enabled for mobile internet access without requiring PIN
code verification. Note that if PIN protection is re‐enabled,
# is the number of allowed PIN verifications remaining
before SIM lock occurs.
PIN Protection:
and
Enables or disables the PIN protection by clicking
making the appropriate choice from the drop‐down list.
PIN Code
If PIN protection is enabled, you need to enter PIN code in
this text box for making changes in this ‘Setting’ dialog.
Change PIN
This option is configurable only if PIN Protection is enabled.
Here you can change the PIN code for enhanced SIM card security.
Old PIN Code:
Enter the old PIN code.
New PIN code:
Enter the new PIN code.
New PIN code
confirm:
Enter the same new PIN code again for PIN code
confirmation.
Click
28
after making changes in ‘Setting’ and/or “Change PIN”.
Using Web-based Management
SIM Management
Here you can see the current SIM lock status.
Scenario 1: SIM lock absent
“SIM no lock” means that the SIM card is unlocked.
Scenario 2: SIM lock present
If your SIM card is locked for some reason, here you can also enter the SIM unlock
code to unlock it. After entering the SIM unlock code in the text box “SIM Unlock”,
click
Preferred Network
Here you can select the preferred mobile network type by clicking
and making a
choice from the drop‐down list. The default choice is Auto. Other available choice
examples are LTE (4G), WCDMA (3G), and GSM (2G).
29
Using Web-based Management
Router
Router Settings
Router IP
30
Local IP Address:
The default local IP address of this router is 192.168.1.1. If
this address conflicts with another local network device,
you can enter another local IP address here.
Subnet Mask:
Displays current Subnet Mask
Device Name:
The current device name is displayed in gray color. The
device name can be changed by typing in the new device
name in this text box.
MTU:
The current MTU (maximum transmission unit with
default value of 1500 bytes) is displayed in gray color. The
MTU can be changed by typing in the new MTU value in
this text box.
Using Web-based Management
DHCP Service
DHCP Server:
Enables or disables the DHCP Server feature.
Start IP Address:
Specifies the starting number of the last 3 digits of
assigned client IP address. For example, the default value
of 100 means that the first assigned client IP address will
be 192.168.1.100; the next assigned client IP address will
be 192.168.1.101; and so on…
Maximum Number
of Users:
Specifies maximum number of users for this router. The
default setting is 150 users.
Client Lease Time:
Specifies the amount of lease time allocated to clients of
this router, i.e. the expiry time of leased addresses. Use ‘h’
to indicate hours or use ‘m’ to indicate minutes.
IP Address Range:
Displays assignable local IP address range of this router
Primary DNS:
If needed, specify the primary Domain Name System here.
Secondary DNS:
If needed, specify the secondary Domain Name System
here.
Active DHCP Leases
This section displays active DHCP lease information for each client: Hostname, IPv4
address, MAC address, and Lease time remaining.
31
Using Web-based Management
Static Leases
This option allows fixed IP address and symbolic hostname assignments for DHCP
clients.
To add a static lease, first click
Enter the desired hostname. Choose the desired MAC address and IPv4‐Address (click
and select a rule from the drop‐down list; if “‐‐Custom‐‐" is selected, the
drop‐down list will change to a text box to allow you to enter your custom address).
The MAC address is for host identification, whereas the IPv4 address specifies the
fixed address for static lease.
To remove any unwanted static lease, just click the corresponding
Click
32
after making any changes.
button.
Using Web-based Management
Advanced Routing settings
Static Routing
This option allows fixed network routing path assignment (as opposed to the initial
adaptive routing).
To add a static network routing path, click
network routing path, click the corresponding
making any changes.
. To remove any unwanted static
button. Click
after
Interface:
and choose ‘lan’ (local area network) or ‘wan’
Click
(wide area network).
Target:
Enter the target host IP or network address here.
IPv4‐Netmask:
Displays the IPv4‐Netmask address (the default is
255.255.255.255). A custom IPv4‐Netmask can also be
specified here.
33
Using Web-based Management
IPv4‐Gateway:
If needed, a custom IPv4‐Gateway address can be
specified here.
Metric:
Specifies the network path priority number (usually
associated with the network path’s administrative
distance). The lower the metric number, the higher
priority of this static route in the network routing
protocol.
The default value is 0 (highest priority). A different metric
number can also be specified here.
Note:
If contents in the text box is invalid, a
will appear on the right side of
the text box, and the text color changes to red. For example, the
following demonstrates an invalid target Host‐IP or Network address:
Routing and Redirection Service
This option enables or disables Network Address Translation (NAT) service, which is a
standard that allows multiple computers on a private network to share a single IP
address.
VPN Passthrough
A Virtual Private Network (VPN) is a type of secured private network connection, built
upon publicly‐accessible infrastructure such as the Internet. They usually provide
connectivity to various devices behind a gateway or firewall.
IPSec Passthrough:
IP Security (IPSec) provides authentication and
encryption. Since it is mainly a Layer 3 technology, it can
secure all data on the network. To allow IPSec tunnels to
pass through the Router, click ‘Enabled’.
PPTP Passthrough:
Point‐to‐Point Tunneling Protocol (PPTP) allows you to
establish a connection to an enterprise network. To allow
PPTP tunnels to pass through the Router, click Enabled.
Layer 2 Tunneling Protocol (L2TP) is an extension of the
Point‐to‐Point Tunneling Protocol and is also used to
establish virtual private networks. To allow L2TP tunnels
L2TP Passthrough:
34
Using Web-based Management
to pass through the Router, click Enabled.
WiFi
This submenu item is for configuring all Wi‐Fi‐related settings. This router supports
up to two WiFi SSIDs. The default SSID is as follows:
Tab Name
Corresponding SSID
Default Password
“BR_LTE_xxxx”
BR_LTE_xxxx
The last 4 digits of MAC address
(xxxx) converted into 2‐digit
decimal numbers, please see
table below for conversion
method.
Hexadecimal
Digit
Decimal
Number
00
01
02
03
04
05
06
07
Hexadecimal
Digit
Decimal
Number
08
09
10
11
12
13
14
15
SSID and Password Example:
MAC Address
Corresponding SSID
Default Password
0026FA0B314A
BR_LTE_314A
03010410
Each tab has identical sets of configuration categories:
Device Configuration and Interface Configuration.
35
Using Web-based Management
Please click
after making any changes in this submenu.
Device Configuration
General Setup
or
Wireless
network is
enabled*
WiFi connection of the associated SSID is enabled.
Wireless
network is
disabled*
WiFi connection of the associated SSID is disabled.
To disable WiFi connection of this SSID, click
To enable WiFi connection of this SSID, click
* Note: The associated SSID is displayed either in the selected
submenu tab under WiFi or in the WiFi category item Interface
Configuration  General Setup  SSID.
Channel:
Selects the WiFi channel for communication. The available
choices are:
Channel (carrier frequency)
1 (2.412 GHz)
2 (2.417 GHz)
3 (2.422 GHz)
36
Using Web-based Management
4 (2.427 GHz)
5 (2.432 GHz)
6 (2.437 GHz)
7 (2.442 GHz)
8 (2.447 GHz)
9 (2.452 GHz)
10 (2.457 GHz)
11 (2.462 GHz)
auto
‐‐ custom ‐‐
 assigns channel automatically
 manually specifies WiFi channel
Normally one of the channels is already selected, and no change
is needed unless there exists interference problems with other
WiFi or Bluetooth devices (that also use the 2.4GHz frequency
range for communications).
Alternatively, you can select ‘auto’ to let the system select the
channel automatically, or you can select
“‐‐ custom ‐‐” and enter your own channel specification in the
text box.
Advanced Settings
Mode
Specifies the IEEE wireless standard for WiFi
communication. The choices are:
Auto:
(Default choice) The router
automatically chooses the
optimal IEEE wireless standard.
802.11b:
Data speed up to 11 Mbps
802.11g:
Data speed up to 54 Mbps
802.11n:
Data speed up to 300 Mbps
HT mode
Specifies channel width for data communications. The
choices are:
20MHz:
Single 20MHz channel
20MHz / 40MHz
Single or dual 20MHz channels
37
Using Web-based Management
Dual SSID is
disabled/enabled
Click
to activate the second SSID, or click
to deactivate the second SSID.
Interface Configuration
General Setup
SSID
Service Set Identification
To change the SSID, click the text box and enter the new
SSID (up to 32 alphanumeric characters)
Mode
Wireless operating mode of this router.
AP:
Wireless Access Point
Hide SSID
Enable this option to make wireless network of this SSID
unavailable to nearby WiFi clients.
Disable this option to make wireless network of this SSID
available to nearby WiFi clients (default setting).

CAUTION: To enable “Hide SSID”, we strongly advise you to do so via
wired LAN connection, since wireless LAN connection with this SSID will
be lost with this option applied! If both SSIDs are hidden, then the
communications with this router must be done via a LAN port, or this
router must be reset to factory default settings.
Wireless Security
This router supports wireless data encryption, a must for wireless data security. The
Wireless Security Interface Configuration items will change according to the chosen
encryption method.
38
Using Web-based Management
The encryption options are:
1. No Encryption
ata transmitted over wireless networks can be seen by others.
2. WEP Open System
Wired Equivalent Privacy encryption with Open System authentication
Ke
y:
Enter a password for accessing this SSID’s wireless network.
3. WPA‐PSK
“WiFi Protected Access – Pre‐Shared Key” encryption
Cipher:
Specify the desired encryption protocol by clicking
option from the drop‐down list:
and selecting an
auto – (default setting) the system automatically chooses the optimal
encryption protocol
Force CCMP (AES) – Use CCMP (AES) encryption exclusively (stronger
than TKIP)
Force TKIP – Use TKIP encryption exclusively
Force TKIP and CCMP (AES) – Use TKIP and CCMP (AES) encryption
protocols together
Key:
Enter a password for accessing this SSID’s wireless network.
4. WPA2‐PSK
39
Using Web-based Management
“WiFi Protected Access II – Pre‐Shared Key” encryption
Cipher:
Specifies the desired encryption protocol by clicking
option from the drop‐down list:
and selecting an
auto – (Default setting) the system automatically chooses the optimal
encryption protocol
Force CCMP (AES) – Use CCMP (AES) encryption exclusively (stronger
than TKIP)
Force TKIP – Use TKIP encryption exclusively
Force TKIP and CCMP (AES) – Use TKIP and CCMP (AES) encryption
protocols together
Key:
Enter a password for accessing this SSID’s wireless network.
5. WPA‐PSK/WPA2‐PSK Mixed Mode
“WiFi Protected Access I + II – Pre‐Shared Key” encryption
Cipher:
Specifies the desired encryption protocol by clicking
option from the drop‐down list:
and selecting an
auto – (Default setting) the system automatically chooses the optimal
encryption protocol
Force CCMP (AES) – Use CCMP (AES) encryption exclusively (stronger
than TKIP)
Force TKIP – Use TKIP encryption exclusively
Force TKIP and CCMP (AES) – Use TKIP and CCMP (AES) encryption
protocols together
40
Using Web-based Management
Key:
Enter a password for accessing this SSID’s wireless network.
6. WPA‐EAP
“WiFi Protected Access – Extensible Authentication Protocol” encryption
Cipher:
Specifies the desired encryption protocol by clicking
option from the drop‐down list:
and selecting an
auto – (default setting) the system automatically chooses the optimal
encryption protocol
Force CCMP (AES) – Use CCMP (AES) encryption exclusively (stronger
than TKIP)
Force TKIP – Use TKIP encryption exclusively
Force TKIP and CCMP (AES) – Use TKIP and CCMP (AES) encryption
protocols together
Radius‐Authentication‐Server:
server.
Enter the name of the RADIUS authentication
Radius‐Authentication‐Port: Enter the port number of the RADIUS
authentication port (the default port number is 1812).
Radius‐Authentication‐Secret: Enter the desired RADIUS secret password
7. WPA2‐EAP
“WiFi Protected Access II – Extensible Authentication Protocol” encryption
41
Using Web-based Management
Cipher:
Specifies the desired encryption protocol by clicking
an option from the drop‐down list:
and selecting
auto – (default setting) the system automatically chooses the optimal
encryption protocol
Force CCMP (AES) – Use CCMP (AES) encryption exclusively (stronger
than TKIP)
Force TKIP – Use TKIP encryption exclusively
Force TKIP and CCMP (AES) – Use TKIP and CCMP (AES) encryption
protocols together
Radius‐Authentication‐Server:
server.
Enter the name of the RADIUS authentication
Radius‐Authentication‐Port: Enter the port number of the RADIUS
authentication port (the default port number is 1812).
Radius‐Authentication‐Secret:
Enter the desired RADIUS secret password.
MAC‐Filter
MAC‐Address Filter:
This tab item allows you to selectively allow or block clients from network access.
and select an option from the drop‐down list:
Click
1. Disable – The MAC address filter is disabled (default option).
and select a desired MAC address from the drop‐down
2. White list* – Click
list, or select “‐‐ custom ‐‐" and enter a specific client’s MAC address.
and select an undesired MAC address from the drop‐down
3. Black list* – Click
list, or select “‐‐ custom ‐‐" and enter a specific client’s MAC address.
42
to add a new drop‐down list;
To add another MAC address to the list, click
then repeat the MAC address selection/specification.
To remove a MAC address from the list, click .
Using Web-based Management
Advanced Settings
This tab item is for advanced adjustment settings for WiFi connection.
Fragmentation
Threshold
Maximum transmittable data packet frame size without
frame fragmentation; the default value is 2346
RTS/CTS Threshold
Defines Request‐To‐Send (transmitter) and Clear‐To‐Send
(receiver) control packet size; the default value is 2347
WMM Mode
Enables or disables Wi‐Fi Multimedia Mode, which gives
multimedia data contents (voice, video, and audio) higher
priority over wireless networks. The default setting of
WMM Mode is Disabled.
WPS Settings
WiFi Protected Setup Settings
This tab item appears when ‘Encryption’ in “Wireless Security” is set to one of the
following: WPA‐PSK, WPA2‐PSK, or WPA‐PSK/WPA2‐PSK Mixed Mode.
WPS:
Mode:
To enable the WPS button for quick WiFi connection setup, click ‘Enabled’,
and 2 additional items will appear: Mode and Start.
Specifies WPS setup mode
PBC Mode –
Push Button Configuration Mode
43
Using Web-based Management
(Note: To use this setup method, the client
must have a WPS button configured to PBC
Mode.)
PIN Mode –
Personal Identification Number Mode
(Note: To use this setup method, the client
must have a WPS button configured to PIN
Mode.)
After choosing PIN Mode, an additional text
box item “PIN Code” will appear.
PIN Code:
This text box item appears when ‘Mode’ is set to “PIN Mode”.
Enter the 8‐digit alphanumeric PIN in the text box. This PIN must
match the PIN of the router client.
If the PIN entered is invalid, the text color will become red with
on the right.
Whenever the PIN entered becomes valid, the text color will be
on the right.
black without
Start:
After setting up WPS Mode (PBC or PIN), click the router client’s
corresponding hardware/software WPS button (actual router
client hardware/software WPS button behavior will depend on
router client manufacturer’s design).
or press‐and‐hold the router’s physical
Click
SS/WPS/Reset button for just over 3 seconds to start the WPS
process.
44
Using Web-based Management
Firewall
Single Port Forward
Single Port Forward
Port Forwarding allows you to set up public services on your network, such as web
servers, ftp servers, e‐mail servers, and other specialized Internet applications.
To forward a single port:
1. Name: Enter an application name for this port forwarding rule.
and select a protocol from the drop down list – TCP+UDP
2. Protocol: Click
(default), TCP, UDP, or Other…
3. External port: Enter the port number of the external port used by the server
or Internet application. Afterward, this port number will be echoed to the text
box of “Internal port”.
and select an IP address from drop‐down list, or
4. Internal IP address: Click
select “‐‐custom‐‐" and enter IP address in text box.
5. Internal port: This text box will automatically receive port number entered in
the text box of “External port”, or you can enter your own port number in the
same text box.
. The port forwarding rule you have just entered will be added to
6. Click
the Port Forwards list.
45
Using Web-based Management
(a)
(b)
In the status area, the message Unapplied Change may appear next to
“Operator Name” to indicate configuration changes temporarily stored in the
router.
7. More rules can be added to the Port Forwards list by repeating Steps 1‐6.
8. (a)To enable or disable a Port Forwards list rule, click its check box under
‘Enable’.
button.
(b) To remove any Port Forwards rule, click its corresponding
9. To edit a particular Port Forwards rule in detail, click its corresponding
button, and the rule’s associated configuration page (much more flexible and
detailed than express settings in Steps 1‐5) will appear. After making any
. Finally click
to exit this configuration
changes, click
page.
Note:
46
Numerical and text values shown in the illustrative examples are for
demonstration purposes only and are not for actual operation.
Using Web-based Management
Port Trigger
Port Trigger
Port Triggering allows the Router to watch outgoing data for specific port numbers.
The Router remembers the IP address of the computer that sends the matching data,
so that when the requested data returns through the Router, the data is pulled back
to the proper computer by way of IP address and port mapping rules.
To add a new Port Triggering rule:
1. Name: enter an application name for this port triggering rule.
and select a protocol from the drop down list – TCP+UDP
2. Protocol: click
(default), TCP, UDP, or Other…
3. Triggered Range: enter the Start Port and End Port for the triggered port
number range of the Internet application (please check its documentation for
the port number(s) needed).
4. Forwarded Range: enter the Start Port and End Port for the forwarded port
number range of the Internet application (please check its documentation for
the port number(s) needed).
47
Using Web-based Management
5. Click
. The port triggering rule you have just entered will be added to the
Port Triggering list.
(a)
(b)
In the
status area, the message Unapplied Change may appear next to “Operator
Name” to indicate configuration changes stored in the router.
6. More rules can be added to the Port Triggering list by repeating Steps 1‐5.
7. (a) To enable or disable a Port Forwards list rule, click its check box under
‘Enable’.
button.
(b) To remove any Port Triggering rule, click its corresponding
8. To edit a particular Port Triggering rule in detail, click its corresponding
button, and the rule’s associated configuration page (more flexible and detailed
than express settings in Steps 1‐4) will appear. After making any changes, click
. Finally click
to exit this configuration page.
Note:
48
Numerical and text values shown in the illustrative examples are for
demonstration purposes only and are not for actual operation.
Using Web-based Management
Security Filter
Here you can make Firewall, Internet Filter, and Web Filters adjustments for network
security.
Firewall
SPI Firewall
Protection:
Enable or Disable Stateful Packet Inspection (SPI) feature
of the firewall. The default setting is ‘Enable’.
Internet Filter
Filter Anonymous
Internet Requests:
This filter blocks anonymous internet requests from
outside network. The default setting is ‘disabled’.
Filter Multicast:
Multicasting allows for multiple transmissions to specific
recipients at the same time, i.e. the Router allows IP
multicast packets to be forwarded to the appropriate
computers.
To allow multicasting, disable “Filter Multicast” (this is
the default setting).
To block multicasting, enable “Filter Multicast”.
Filter Internet NAT
This filter blocks local resource access via NAT (Network
49
Using Web-based Management
Redirection:
Address Translation) redirection (i.e. external address)
from other local computers. The default setting is
‘enabled’.
Filter IDENT
(Port113):
This feature keeps Port 113 from being scanned by
devices outside of your local network. The default setting
is ‘disabled’.
Web Filters
Using the Web Filters feature, you may enable up to four specific filtering methods.
Proxy:
Use of WAN proxy servers may compromise the Router's
security. Select this option to disable access to any WAN proxy
servers.
Java:
Java is a programming language for websites. Select this
option to disable Java. If you disable Java, you run the risk of
not having access to Internet sites created using this
programming language.
ActiveX:
ActiveX is a programming language for websites. Select this
option to disable ActiveX. If you disable ActiveX, you run the
risk of not having access to Internet sites created using this
programming language.
Cookies:
A cookie is data stored on your PC and used by Internet sites
when you interact with them. Select this option to disable
cookies.
DMZ Host
When a firewall is used, it is sometimes necessary to place some clients (for example
Internet games, video conferencing, or VPN connections) outside of the firewall while
50
Using Web-based Management
leaving the others protected. You can do this using a Demilitarized Zone (DMZ). This
DMZ Host feature allows you to specify the IP address of the computers that are
placed outside the firewall of your network.
In the text box, enter the last 3 digits of the DMZ host address (the prefix is 192.168.1
for this router), and then click
The host IP address will be added to the DMZ Host list, which can be further disabled
or enabled by clicking the ‘Enable’ checkbox. To remove this DMZ Host, click
After setting up the DMZ host, click
Network Filtering
Network Filtering
Network Filtering allows the Router to discard data from certain IP addresses.
To add a new IP filtering rule:
1. Name: Enter an application name for this IP filtering rule.
and select a protocol from the drop down list – TCP+UDP
2. Protocol: Click
(default), TCP, UDP, or Other…
3. Filter Source IP Address: Enter the source IP address to be filtered. The text
on the right for any invalid IP address entered (e.g.
color will turn red with
51
Using Web-based Management
). When the IP address entered becomes valid, the text color
changes back to black without
on the right (e.g.
).
4. Filter Source Port: Enter the source port number to be filtered.
. The IP filtering rule you have just entered will be added to the IP
5. Click
Filtering list.
(a)
(b)
In the status area, the message Unapplied Change may appear next to
“Operator Name” to indicate configuration changes stored in the router.
6. More rules can be added to the IP filtering list by repeating Steps 1‐5.
7. (a) To enable or disable an IP filtering list rule, click its check box under ‘Enable’.
(b) To remove any Port Triggering rule, click its corresponding
button.
8. To edit a particular IP filtering rule in detail, click its corresponding
button, and the rule’s associated configuration page (more flexible and detailed
than express settings in Steps 1‐4) will appear. After making any changes, click
. Finally click
to exit this configuration page.
Note:
52
Numerical and text values shown in the illustrative examples are for
demonstration purposes only and are not for actual operation.
Using Web-based Management
Port Range Forward
Port Range Forward
Port Range Forward allows you to set up public services on your network, such as
web servers, ftp servers, e‐mail servers, and other specialized Internet applications.
To forward a port range:
1. Name: Enter an application name for this port range forwarding rule.
and select a protocol from the drop down list – TCP+UDP
2. Protocol: Click
(default), TCP, UDP, or Other…
3. Port Range Forward: Specify the range of port forwarding by entering the Start
Port number and the End Port number.
4. IP address: Enter the IP address of the PC running the specific application.
. The port range forwarding rule you have just entered will be
5. Click
added to the Port Range Forward list.
(a)
(b)
In the
status area, the message Unapplied Change may appear next to “Operator
Name” to indicate configuration changes temporarily stored in the router.
6. More rules can be added to the Port Range Forward list by repeating Steps 1‐5.
53
Using Web-based Management
7. (a) To enable or disable a Port Forwards list rule, click its check box under
‘Enable’.
(b) To remove any Port Forwards rule, click its corresponding
button.
8. To edit a particular Port Forwards rule in detail, click its corresponding
button, and the rule’s associated configuration page (more flexible and detailed
than express settings in Steps 1‐4) will appear. After making any changes, click
. Finally click
to exit this configuration page.
Note:
Numerical and text values shown in the illustrative examples are for
demonstration purposes only and are not for actual operation.
UPNP
Universal Plug and Play – Allows wired and wireless network devices to discover each
other and establish network services.
UPnP Settings
Here you can ‘Enable’ or ‘Disable’ the UPnP service.
54
Using Web-based Management
Advanced
Diagnostics
This menu contains tools for effective network analysis and troubleshooting.
Network Utilities
Ping
This feature allows you to check the status of a connection.
, enter the IP address or URL that you want to ping,
1. In the text box next to
and then select its corresponding internet protocol by clicking either the IPv4 or
IPv6 radial button.
2. In the text box of “Packet Size”, enter the desired value (default packet size is 56).
3. In the text box of “Number of Pings”, enter the number of times you wish to ping
(default value is 5).
4. Click
below.
to begin the connection status check. ‘Ping’ messages will appear
Traceroute
This feature allows you to check the performance of a connection.
55
Using Web-based Management
1. In the text box next to
trace route, and then click
messages will appear below.
, enter the IP address or URL that you want to
to start the performance text. ‘Traceroute’
NS Lookup
This feature allows you to retrieve name server information.
1. In the text box next to
trace route, and then click
messages will appear below.
56
, enter the IP address or URL that you want to
to get name server information. ‘Nslookup’
Using Web-based Management
SMS
Short Message Service – Allows mobile phones and network devices to exchange
short text messages.
New SMS
Here you can write and send a new SMS message. Enter the recipient’s phone
number in the field Phone number. Enter message texts in the field Contents. To erase
written contents and start over again, click
. To save written contents as a
draft for later use, click
. When you are ready to send the message, click
. A confirmation message will appear if the SMS message is sent successfully.
57
Using Web-based Management
Inbox
Here you can receive and read incoming SMS messages. To get messages from the
server, click
. To remove unwanted messages, select messages to delete and
click
Outbox
Here you can see SMS messages that have been sent out.
To forward a particular SMS message, check only the message of interest without
checking others.
58
Using Web-based Management
Click
An additional configuration item Forward SMS will appear on top of the configuration
item Outbox. If necessary, modify the recipient’s phone number in the field Phone
number or modify message texts in the field Contents. To cancel message forwarding,
. To save written contents as a draft for later use, click
click
When you are ready to forward the message, click
To remove SMS messages from Outbox, check the messages to remove.
Click
Draft
59
Using Web-based Management
Here you can review and send out SMS messages drafts that have been previously
saved.
To send a particular SMS draft message, check only the message of interest without
checking others.
Click
An additional configuration item Edit SMS will appear on top of the configuration
item Draft. If necessary, modify the recipient’s phone number in the field Phone
number or modify message texts in the field Contents. To cancel sending out the SMS
draft message, click
. To save written contents as a draft for later use, click
. When you are ready to send the SMS draft message, click
To remove SMS draft messages from the draft list, check messages to remove.
60
Using Web-based Management
Click
Setting
Here you can configure settings for service center and SMS backup.
Setting
Enter the service center phone number in the field Service Center Address and click
. To clear current phone number and enter a new one, click
Backup
61
Using Web-based Management
To backup SMS messages to your local computer, click
SMS to client.
in the field Backup
Choose Save File, click OK, and follow directions on the screen to save SMS messages
on your local computer as a packed ZIP file.
To recover SMS messages from your local computer, click Browse in the field Recover
SMS from client and select the ZIP file that you have saved previously, and then click
62
Using Web-based Management
Help
Click the appropriate download link to download the latest Quick Start Guide or User
Manual of this product.
Logout
Exits the web configuration interface and re‐directs to login prompt.
Note:
After a period of inactivity, automatic logout will occur. After clicking any
menu item, the login prompt will appear as re‐login is needed to continue
using the web configuration interface.
63
Appendix A: FAQ
Appendix A: FAQ
Q: What should I know and how long does it take when I upgrade the firmware of
router or modem?
A: 1. While upgrading the firmware requires some time to finish. During that, you
MUST NOT turn off the power or interrupt the progress.
2. You may use an Ethernet cable or a wireless connection to upgrade the
firmware. We suggest the use of an Ethernet cable.
3. It may take 2 minutes to upgrade the firmware of the router and 5 minutes to
upgrade the firmware of the modem.
4. When the firmware of the modem is upgrading, the UMTS LED will flash
among Blue‐Green‐Red. You should wait until the LED is in single color (about
4‐5 minutes).
Q: How do I connect to the router?
A: 1. Connect an Ethernet cable between PC/Notebook (NB) and the router.
2. Use WiFi to connect.
Q: What’s the default “User name” and “Password” for the router?
A: User name: admin
Password: admin
Q: How do I enter GUI and setup the configuration for the router?
A: 1. Connect PC/NB to the router.
2. Open Internet Explorer or other Web browser.
3. Input “http://192.168.1.1”.
4. Input User name and Password.
Q: Why can’t I connect to the network via built‐in 3G module?
A: 1. Check the SIM/USIM to see if it is inserted well.
2. Check the UMTS LED on the router to see if it is solid.
3. Check the Status on GUI to see if the SIM/USIM detected well.
4. Check the Status on GUI to see if the APN it is correct.
5. Check the Internet on GUI to see if the Connection is “Keep Alive” or not.
Q: Why can't I link on the GUI?
A: If you have changed your WiFi security, SSID, Local IP address, you
have to repair your network to get a new IP that you can link the GUI.
XP:
If you are a WiFi user, click Network Connections and right click on
64
Appendix A: FAQ
Wireless Network Connection, click Repair.
If you use Local Area Connection to connect the Router, click Network
Connections and right click on Local Area Connection, click Repair.
Vista/7:
1. If you are a WiFi user, please click Network and Sharing Center > Manage
network connections > Wireless Network Connection > Diagnose.
65
Appendix A: FAQ
2. Please click Reset the network adapter “Wireless Network Connection” and
it will began to repair.
3. If you use Local Area Connection to connect the Router, please click Network
and Sharing Center > Manage network connections > Local Area Connection
> Diagnose, follow step 1 and the subsequent messages to repair it.
Q: How do I configure my WiFi settings from GUI?
A: Click the menu tabs Network  Wi‐Fi to access to the Wi‐Fi submenu, and then
click the submenu tab of a particular ESSID.
If you want to configure WiFi Security please click the “Wireless Security” tab
under “Interface Configuration”.
There are seven wireless security encryption options supported by the Router:
WEP Open System, WEP Shared Key, WPA‐PSK, WPA2‐PSK,
WPA‐PSK/WPA2‐PSK Mixed Mode, WPA‐EAP, and WPA2‐EAP.
66
Appendix A: FAQ
Q: How can I have a long‐time link?
A: Click the menu tabs Network  Router  Router Setting. Under “DHCP
Service”, set Client Lease Time to a large value (e.g. 120h = 120 hours = 5 days).
Q: Why can’t I use the router in the office?
A: Your router’s IP address might conflict with the office default settings.
Q: Why is my internet speed is so slow with the router?
A: 1. Click the menu tabs Status  Mobile Internet to check the Rx Signal Strength
in dBm. Weak signals will significantly slow down internet speed.
LEDs ON
Signal
Strength
3G/2G/cdma2000
RSSI reading
4G LTE
RSRP reading
none
0 bars
Weaker than ‐100 dBm
Weaker than ‐115 dBm
#12
1 bar
‐100 dBm to (just below) ‐95 dBm
‐115 dBm to (just below) ‐109 dBm
#12to#13
2 bars
‐95 dBm to (just below) ‐90 dBm
‐109 dBm to (just below)) ‐103 dBm
#12to#14
3 bars
‐90 dBm to (just below) ‐83 dBm
‐103 dBm to (just below) ‐95 dBm
#12to#15
4 bars
‐83 dBm to (just below) ‐76 dBm
‐95 dBm to (just below) ‐87 dBm
#12to#16
5 bars
‐76 dBm or stronger
‐87 dBm or stronger
67
Appendix A: FAQ
2. Click the menu tabs Network  Wi‐Fi to access the Wi‐Fi submenu, and then
click the submenu tab of the currently used ESSID. Then select a different WiFi
Channel under “Device Configuration.”
Q: I have connected the computer with the router via LAN connection. Why can’t I
access the router’s IP address “http://192.168.1.1” ?
A: Your computer’s IP address and DNS server addresses may have been assigned
manually. Please set your computer’s IP address and DNS server addresses to be
obtained automatically. The Windows setup path is:
Control Panel  All Control Panel Items  Network and Sharing Center 
Local Area Connection  Properties  Internet Protocol Version 4 (TCP/IPv4)).
Q: Why can’t I use VPN via Router?
A: You may check your office IP settings, the IP settings must not conflict with each
68
Appendix A: FAQ
other.
Q: How do I configure the settings when I use xDSL to link the router?
A: 1. PPPoE: Go to the GUI Internet > Basic Setting > Ethernet Setting. Change
Connection Type to PPPoE. Enter the Username and Password provided by
your ISP. Remember to connect your xDSL or Modem to the WAN Port on
your Router.
2. Static IP: Go to the GUI Internet > Basic Setting > Ethernet Setting. Change
Connection Type to Static IP. Enter the information in the blank provided by
your ISP. Remember to connect your xDSL or Modem to the WAN Port on
your Router.
Q: Can I prevent others from using my router?
A: Yes, there are some ways to prevent others from using your router.
1. Enable your WiFi client filter.
2. Disabled your SSID Broadcast.
3. Setting your WiFi security.
Q: My PIN code is enabled and where can I input the PIN code to use my Router?
A: Click the menu tabs Network  Mobile Internet  U/SIM PIN Management;
enter your PIN Code and click
Q: Why does my U/SIM status display “PIN Disable”?
A: Check that the SIM card (which is properly activated
your mobile internet service provider) is inserted correctly
your router.
by
in
69
Appendix A: FAQ
Q: Where can I change the password of the router?
A: Click the menu tabs System  Administration . Enter the new password twice
(set and confirm) and click
Q: Can I backup and restore all my settings of the router?
A: Yes. Click the menu tabs System  Backup / Flash Firmware and click
, then follow instructions on the screen to save router settings as a
TAR file at a desired location on your computer or mobile device. Conversely, to
(of “Restore backup”);
restore previously saved router settings, click
follow screen instructions to choose the previously saved TAR file; and then click
Q: How do I use the Reset button on the router?
A: 1. Short press the Reset button to restart the router.
2. Long press the Reset for more than 10 sec to reset the router to factory
default settings.
Q: Where can I reset the router to factory default settings?
A: 1. Long press the Reset button on the router for more than 10 sec.
2. Click the menu tabs System  Backup / Flash Firmware and click
Q: If I remove the SIM when 3G is connected, why can’t I see the SIM status change?
A: You have to restart the router to see the status. It is best to remove the SIM card
when the router is OFF.
70
Appendix B: Specifications
Appendix B: Specifications
Note: Specifications are subject to change without notice.
Physical
WLAN
802.11 b/g/n (2x2 MIMO)
Cellular modem
Embedded, LTE FDD&TDD
Dimensions
(LxWxH, mm)
143.6 x 73.3 x 143
Weight (g)
TBD
Interface
Power On/Off
Switch
Yes
RJ45 Ports
Four LAN ports, each with LED indicator.
Power supply plug Yes
SIM slot
Yes
LED Display
Yes, for Network Status, WPS, WiFi, Signal Strength and Power.
SS/WPS/Reset
button
Short press for signal strength indication
Long press (>3s, <10s) for WPS activation
Long press (>10s) for reset to factory default setting
Connectivity and Data Speed
LTE Data Rate
Downlink: up to 100Mbps, Uplink: up to 50Mbps
LTE Bandwidth
Up to 20 MHz
WLAN
802.11 b/g/n, 2x2 MIMO
Antenna
Cellular
embedded main
antenna
Yes
Cellular
embedded
diversity antenna
Yes, supporting LTE bands
71
Appendix B: Specifications
WiFi antenna
Embedded
Router Features
Routing
Static Routing, Dynamic Routing (RIP)
Security
Multiple VPN pass‐through (IPSec, PPTP, L2TP), Internet Access Policy
(Parental control), Stateless and SPI Firewall
NAT‐NAPT
Single Port Forwarding, Port Range Forwarding, Port Range Triggering,
Port Filtering, DMZ, UPnP, Multicast Pass‐Through
DNS
DNS Agent, DDNS
Other features
IPv4, IPv6, IPv4v6 dual stack, TCP, UDP, ICMP, ARP, DHCP Server/Client,
HTTP/HTTPs, NTP, ALGs (FTP, PPTP, RTSP)
Browser‐based
Administration
GUI
Setup Wizard in GUI.
Browser supported: IE, Firefox, Safari, Chrome
Wireless LAN
802.11b data rate
1/2/5.5/11 Mbps
802.11g data rate
Up to 54
802.11n data rate
Up to 300 Mbps
802.11e QoS
WMM (WiFi Multimedia), No ACK
Security Types
WPA2/WPA/AES/TKIP, WPA/WPA2 PSK mode, None/64/128 bits WEP
Encryption, open system authentication.
Device Unique
Default
Encryption Key
Such unique key is linked to MAC address of the device.
Auto Channel
Select (ACS)
Yes, for channel 1 through 11
Other features
WPS software button, SSID broadcast disable, Guest Network (Dual
SSID), Access control (MAC filter), WLAN on/off software switch.
Mbps
Status Indication
LED Display
72
1x 3‐color Network Status
1x Power (also multiplexed with signal strength)
1x WiFi (also multiplexed with signal strength)
1x WPS (also multiplexed with signal strength)
1x SMS (also multiplexed with signal strength)
Appendix B: Specifications
1x Signal Strength without multiplex
Software Features
Web GUI
Web‐based Setup Wizard in GUI.
Browser supported: IE, Firefox, Safari
Web GUI
Language Support
English
Connection Status
in Web GUI
Network name, Signal strength, Roaming indication, Radio
technology, Connection status, Connection time, Total
downlink/uplink byte
Connection
management
Connection on demand, Connection when available, Auto APN
matching with USIM , APN database update through
browser‐based GUI, PIN management, Preferred radio NW type
selection, Auto/Manual network selection.
System protection
Password protected system reset to factory default, Password
protected administrator and user access authority (provisioning,
configuration, authentication).
Support FW
version upgrade
Yes
Device
Management
TR‐069
Accessories
Power Adapter
Input: 100to240V, 50to60Hz AC;
Output: 9V DC
Environment
Operation
Temperature
0oC to 45oC (32oF to 113oF)
Storage
Temperature
‐20oC to 60oC (‐4oF to 140oF)
Operating
Humidity
10% to 80% Non‐Condensing
Storage Humidity
5% to 90% Non‐Condensing
Certification
RoHS
73
Appendix C: Important Safety Information and Glossary
Appendix C: Important Safety Information
and Glossary
Europe – EU Declaration of Conformity
European Union Notice
Products with CE marking comply with the R&TTE Directive (99/5/EC), the EMC
Directive (2004/108/EC), and the Low Voltage Directive (2006/95/EC) issued by the
Commission of the European Community.
Compliance with these directives implies conformity to the following European
Norms (in parentheses are the equivalent international standards).
EN 60950‐1 (IEC 60950‐1)
Safety of Information Technology Equipment.
EN 300 328
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; data transmission equipment operating in the 2.4 GHz
ISM band and using spread spectrum modulation techniques.
EN 301 489‐24
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 24: Specific conditions for IMT‐2000 CDMA direct spread (UTRA) for mobile and portable (UE)
radio and ancillary equipment.
ETSI EN 301 511
Global system for mobile communications (GSM); Harmonised EN for mobile stations in the GSM
900 and GSM 1800 bands, covering essential requirements of article 3.2 of the R&TTE directive
(1995/5/EC).
ETSI EN 301 489‐1
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 1: Common technical requirements.
ETSI EN 301 489‐7
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
74
Appendix C: Important Safety Information and Glossary
Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular
radio telecommunications systems (GSM and DCS).
ETSI EN 301 489‐17
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for 2.4 GHz wideband transmission systems.
ETSI EN 301 908‐1 & ‐2
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters
and User Equipment (UE) for IMT‐2000 Third Generation cellular networks; Part 1: Harmonised EN
for IMT‐2000, introduction and common requirements, covering essential requirements of article
3.2 of the R&TTE Directive.
EN 50385
Product standard to demonstrate the compliance of radio base stations and fixed terminal stations
for wireless telecommunication systems with the basic restrictions or
the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz
‐ 40 GHz) ‐ General public.
Federal Communication Commission Interference
Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s
authority to operate the equipment.
****************************************************************************************************************************
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
****************************************************************************************************************************
FCC RF Exposure Information
This equipment complies with radio frequency (RF) exposure limits adopted by the Federal Communications
Commission for an uncontrolled environment. This equipment should be installed and operated with minimum
75
Appendix C: Important Safety Information and Glossary
distance 20 cm between the radiator & your body.
****************************************************************************************************************************
76
Appendix C: Important Safety Information and Glossary
Glossary
2G: Second‐generation mobile networking technology. Represents a switchover from analog to
digital; most 2G networks use GSM.
3G: Third‐generation mobile networking technology that enables simultaneous transfer of voice and
non‐voice data; most 3G networks use WCDMA.
3.5G: A more recent standard of mobile networking technology; generally uses HSDPA.
3.75G: A more recent standard of mobile networking technology; generally uses HSUPA.
4G: A more recent standard of mobile networking technology; generally uses LTE.
APN (Access Point Name/Network): Provides GPRS routing information. Consists of:
Network ID: Identifies the external service requested by a GPRS user.
Mobile network operator ID: Specifies routing information.
ARFCN (Absolute Radio Frequency Channel Number): The specific ID numbers for all radio channels
used in cellular mobile communications.
bps (bits per second): How data flow is measured.
CHAP (Challenge Handshake Authentication Protocol): CHAP identifiers are changed frequently
and authentication can be requested by the server at any time.
DNS (Domain Name System): Helps route network traffic by making the addressing process more
user‐friendly.
DHCP (Dynamic Host Configuration Protocol): How devices obtain IP addresses from a server.
DUN (Dial‐Up Network): Windows component that enables online access via a modem.
EDGE (Enhanced Data GSM Environment/Enhanced Data for Global Evolution): Advanced GPRS
that delivers multimedia and other data needing greater bandwidth at up to 237 kbps.
GPRS (General Packet Radio Service): Delivers data in packets at up to 86 kbps.
GSM (Global System for Mobile Communications): The most popular cellular network, mostly
operates in 850‐900 or 1800‐1900 MHz; the primary 2G system.
HSDPA (High Speed Downlink Packet Access): Advanced WCDMA that delivers downlink bandwidth
intensive data at up to 7.2Mbps; typically associated with 3.5G.
HSUPA (High Speed Uplink Packet Access): Advanced WCDMA that delivers uplink bandwidth
intensive data at up to 5.76Mbps; typically associated with 3.75G.
HSPA+ (High Speed Packet Access +): This is also known as HSPA Evolved, is the next step and is
more focused on delivering data services enabling speeds of up to 42Mbps in the downlink
and 11Mbps in the uplink.
IMEI (International Mobile Equipment Identity): A number unique to each GSM/UMTS device that
can be used block network access by a stolen mobile device.
IP (Internet Protocol): Routes packets over a network.
77
Appendix C: Important Safety Information and Glossary
Kbps (Kilobits per second): A data flow measure; 1024 bits/second.
LAN (Local Area Network): A data network with limited range but good bandwidth.
Mbps (Megabits per second): A data flow measure; 1,048,576 bits/second.
LTE (Long Term Evolution): High‐speed mobile communication standard based on the GSM/EDGE
and UMTS/HSPA network technologies. LTE provides downlink peak rates up to 300 Mbit/s
and uplink peak rates up to 75 Mbit/s.
PAP (Password Authentication Protocol): The difference between PAP authentication and a manual
or scripted login, is that PAP is not interactive. The username and password are entered in the
client's dialing software and sent as one data package as soon as the modems have
established a connection, rather than the server sending a login prompt and waiting for a
response.
PPP (Point‐to‐Point Protocol): An internet connection method.
PIN (Personal Identity Number): Four to eight digital numbers SIM card security code; allows access
to the carrier’s network.
Rx: Shorthand for Reception.
SIM (Subscriber Identity Module): A small card that contains key mobile device identification,
subscription and contact information.
Tx: Shorthand for Transmission.
WCDMA (Wideband Code Division Multiple Access): Advanced EDGE that supports 384kbps data
flow. Most 3G networks use this standard, the same as UMTS.
78

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : sandy
Create Date                     : 2014:06:26 10:48:23+08:00
Modify Date                     : 2014:06:26 10:55:59+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : sandy
Title                           : Microsoft Word - BandLuxe R565 User Manual_20140626
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:06:26 10:55:59+08:00
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Document ID                     : uuid:668c0ef9-72af-4af8-abeb-80d6daa6c9c5
Instance ID                     : uuid:da170ad1-e11b-462a-809b-d0d87acf8064
Page Count                      : 80
EXIF Metadata provided by EXIF.tools
FCC ID Filing: UZI-565R66

Navigation menu