Bang and Olufsen a s RC1 BLE Remote Control User Manual T30 online guide 221215 BUE

Bang & Olufsen a/s BLE Remote Control T30 online guide 221215 BUE

Users Manual

BeoRemote One
DRAFT
2
Daily use
Introduction to BeoRemoteOne
and the guide, 3
Pairing your remote control, 4
Using your BeoRemoteOne,6
BeoRemoteOne in detail, 7
Access your favourite content using
MyButtons, 9
Customise your remote control, 10
Make settings for the display, 13
Maintenance, 14
Advanced use
Add more products, 15
How to add a product to the
BeoRemoteOne LIST and how to give it a
specific Option.
Using BeoRemoteOne for a ‘Beo4’
product, 18
How to use BeoRemoteOne for operation of
a Master Link television or music system
which is normally operated with Beo4.
Beo4 and BeoRemoteOne conversion, 21
Find out which button to use on
BeoRemoteOne, if you are used to Beo4.
BeoRemoteOne advanced settings, 22
Make advanced settings for your remote
control. You can, for example, change the
display language or reset your
BeoRemoteOne to factory settings.
BeoLink setup, 24
How to display and listen to sources from
another Bang& Olufsen product when your
products are connected to the same
network.
Contents – Click a headline to move to that section
This guide contains additional information about your BeoRemoteOne and
describes features and functions in detail. Among other things you can
find information about settings.
This guide will be updated on a regular basis to make it reflect, for example,
new features and functions introduced with software updates.
You can find additional information about your product in the Frequently
Asked Questions (FAQ) section on www.bang-olufsen.com/
customerservice.
Version 1.0 1601
DRAFT
a a
Beo4’ Beo4’
One for operation of peration of
ion or music system or music system
y operated with Beo4.y operated with Be
BeoRemoteOne conversion, BeoRemoteOne conversion,
ut which button to use on ut which
moteOne, if you are used to Beo4.moteOne, if you are used to Beo4.
ne advanced settings, 2ne advanced settings, 2
2 2
ettings for your remote ettings for your remote
example, change texample, change t
t your t your
setti
setti
T
product produc
ng-olufsen.comng-oluf
g
3
Introduction to BeoRemoteOne and the guide
The BeoRemoteOne is a hand-held remote
control which gives easy access to remote
operation of your Bang& Olufsen television
or music system.
With BeoRemote One you can operate both
Bluetooth and IR based products.
The display on BeoRemoteOne shows you
sources or functions, such as TV, RADIO
and STAND, or even the lights.
The BeoRemoteOne remote control
incorporates more functions than just the
actual buttons. Extra sources are brought
up on the BeoRemoteOne display using the
TV and MUSIC buttons and additional
functions can be obtained using the LIST
button.
To turn the television on a motorised
stand…
Press to bring up SOUND in
the BeoRemoteOne display
Select a sound mode
Symbols used in this guide
Remote control operation 
– A dark grey button, such as LIST,
indicates a physical button you must
press.
– A light grey display text, such as STAND,
indicates a BeoRemoteOne display text.
Press LIST, TV or MUSIC on
BeoRemoteOne to bring it up. The text
appears in the BeoRemoteOne display.
You may be able to show or hide display
texts for LIST, TV and MUSIC, and also
rename texts. For more information see
page 10 and page 11.
– The centre button is symbolised by
which is used in the operation sequences
when you must press the centre button.
LIST
SOUND
Daily operations are carried out by pressing a
single button on BeoRemoteOne, or by
pressing a few buttons in a logical and
straightforward sequence.
Example of BeoRemoteOne operation.
d d
ay
nd mode nd mode
DR
RA
Remote control operation mote control operation
–
A dd
ark grey button, such as ark grey button, such
LIS
indicates a physical button yindicates a physical button
press. press.
––
A lA
ight grey display teey display te
indicates a BeoRe
Press
LIST
,
TV
BeoRemoteBe
appearsappea
You mYou m
te
DR
R
LIS
R
R
R
SOUND
DR
DR
DR
DR
DR
sing a sing a
rby rby
l and l and
f BeoRemoteOne operation. f BeoRem
4
Pairing your BeoRemoteOne
You can operate both Bluetooth
and IR based products with your
BeoRemoteOne. To operate a
Bluetooth product, you must first
make sure that your remote control
is paired to the product.
BeoRemoteOne then typically
synchronises various settings with
the paired products and thereby
eases recognition and browsing of
sources and functions in the display.
Pairing is not used for IR based
products. Consequently, you should
skip the pairing process during first-
time setup. For information about
Option programming of IR
products, see page 16.
When pairing BeoRemoteOne to a
Bluetoothproduct, the product provides a
product name to be used in the remote
control display. Settings for sources and
dierent functions are then typically set in
the Bluetooth product, instead of in the
remote control.
You can pair your remote control to a number
of Bluetooth products, and a Bluetooth
product can be paired to a number of
Bluetooth remote controls.
Pair or unpair a remote control
Depending on your setup, dierent settings
are required for interaction to succeed,.
However, common to all setups with a
Bluetooth product is that you need to pair
your remote control with the product to be
able to operate it.
First-time setup of your remote control
Before setting up your remote control, make
sure your product is connected to the mains,
and if it is already in use, you must also open
your Bluetooth product for pairing.*
Put in fresh batteries in your
remote control** and place
yourself in front of the product
After timeout of a welcome
screen in the display, set the
preferred language
If a Bluetooth product is
opened for pairing, pairing
takes place.* Otherwise...
...select Pairing if you have a
Bluetooth product and forgot
to open it for pairing***, or
select Skip pairing if you have
an IR product
Your remote control is now
ready for use
*See the guide for your Bluetooth product
for information on how to open the product
for pairing.
**See the Quick guide enclosed with your
remote control or product for information on
how to insert batteries.
***When your Bluetooth product is later
connected to the mains and opened for
pairing, pairing takes place.
...
...
Continued…
DRAFT
in in
he he
ontrol to a number ol to a nu
and a Bluetooth ooth
ed to a number of
e controls. e controls.
n
ductuct
welcome
play, set the
nguage nguage
uetooth product is product is
ened for pairing, pairing ring, p
takes place.* Otherwise... erwis
...select ...select
PairingP
if you have a ou have
Bluetooth product and forgot etooth product and forg
to open it for pairing***, or pen it for pairing***, or
select ect
Skip pairingSk
if you have u have
an IR product an IR product
Your remote control i
ready for use re
k gk g
trol or prtrol or p
nsert batteries.nsert ba
**When your Bluetooth produ**When your
connected to the mains and open
connected to the m
pairing, pairing takes place. pairing, pairing takes
AF
A
AF
AF
AF
..
AF
A
A
A
5
>> Pairing your BeoRemoteOne
Pair a remote control already in use
If you want to pair a BeoRemoteOne
already in use with another Bluetooth
product, you must open both your remote
control and the product for pairing. To open
a product for pairing, see the guide for it.
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Pairing
Press to bring up Pair
From the list of products
found, press to select a
product to pair with
A message appears when
pairing has completed
Unpair a remote control
It is also possible to unpair your remote
control from a Bluetooth product.
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Pairing
Press to bring up Remove
From the list of products
paired, press to select a
product to unpair
Press to confirm. The product
is no longer paired with the
remote control
See the name of BeoRemoteOne
See the name of BeoRemoteOne as it is
seen on a television you have paired it with.
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Pairing
Press to bring up Name
The name of the remote
control is shown
LIST
Settings
Pairing
Pair
...
LIST
Settings
Pairing
Remove
...
...
LIST
Settings
Pairing
Name
DRAFT
a
firm. The product firm. The
ger paired with the paired with the
e control ol
s to bring up s to brin
Pairing
Press to bring up p
NameName
The name of the remote The n
control is shown co
F
AF
AF
F
emove
F
F
F
F
.
AF
AF
AF
AF
AF
T
T
T
T
6
Using your BeoRemoteOne
The BeoRemoteOne display shows you sources
and functions.
The TV button shows a list of TV sources.
The MUSIC button shows a list of music sources*
The MyButtons are short cuts to the
personalisation function**
Number buttons
Control buttons for menu operation and for
operation of non-Bang& Olufsen products
through the Peripheral Unit Controller
Playback buttons and replay
Button for channel and station step Button for volume adjustment. To mute, press
in the middle of the button, press again to
bring back the sound
Standby button
Display text in focus
If the display text is longer than one line, the
text will scroll in from the right in order to
display all text when the text is in focus.
Centre button for selection
The LIST button shows a list of functions
related to the active source
Buttons for functions such as Programme
Guide and Information, and for menu operation
of the selected source
*Depending on your remote control, the
NETFLIX source may be either a physical
button or a source found when pressing TV.
NETFLIX may not be available on all markets.
**Depending on your remote control, you
may have either three or four MyButtons.
DRAFT
RAF
AF
RA
AF
RAF
RAF
R
F
F
A
A
AF
AF
A
A
A
A
AF
AF
A
A
A
A
AF
AF
R
R
R
A
A
RA
RA
RA
RA
RA
RA
AF
RAF
A
RA
RA
RA
RA
RA
RA
RA
RAF
RA
RA
A
A
A
A
RA
RA
RA
RA
RA
RA
A
RA
RA
RA
A
A
A
A
A
AF
AF
AF
AF
AF
AF
F
R
R
AF
A
MyButtonsyButton
are short cuts to the hort cuts
s
ersonalisation function**ersonalisation function**
Number buttonsbutton
d for
roducts
t Controllert Controller
Playback buttons and replayck buttons and replay
Button for channel and station step Button for channel and station step
RA
RA
RA
T
DR
R
R
T
FT
F
F
F
A
A
A
nger thnger th
om the right inom the rig
when the text is in fowhen the
A
A
A
A
A
RA
A
RA
RA
A
A
C
Buttons for functions sucButtons
Guide and Informatiouide and I
of the selected soe selected
AF
AF
AF
AF
7
BeoRemoteOne in detail
Daily and advanced operation with
BeoRemoteOne buttons
The buttons on BeoRemoteOne are
conveniently grouped for daily operation.
TV … displays available TV sources in the
BeoRemoteOne display for you to switch
on. Use or to step in the list and press
the centre button to switch on a source.
MUSIC … displays available music sources in
the BeoRemoteOne display for you to
switch on. Use or to step in the list and
press the centre button to switch on a
source.
MyButtons, , , … a long press stores
the current setup, such as source, sound
and picture settings. A short press selects
it. You can also set up the MyButtons to
select a specific source only, see page 9.
Number buttons … 0–9 are used whenever
you have to enter numbers, for example to
select a specific TV channel or radio
station.
LIST … displays extra functions and products
in the BeoRemoteOne display. Use or
to step in the list and press the centre
button to select an item.* If you exit LIST
and press LIST again within short time, you
may need to press LIST one more time to
display the top of the menu.
… allows you to back up through menus
and the BeoRemoteOne lists. Long press
exits menus and the BeoRemoteOne lists.
INFO … brings up programme information
for your Bang& Olufsen television.
GUIDE … brings up the Programme Guide on
your Bang& Olufsen television.
… brings up the on-screen menus for
your Bang& Olufsen television.
Note that you may be able to show or hide
display texts for the TV, MUSIC and LIST
buttons, and also rename texts. For more
information see page 10 and page 11.
*If you have selected LIGHT or CONTROL in
the LIST menu, you must press LIST again to
access your light and control functions.
Continued…
DRA
t t
LISTLIST
rt time, you rt time,
more time to more ti
nu.
to back up through menus to back up through menus
oRemoteOne lists. Long press oRemoteOne lists. Long
enus and the BeoRemoteOne lists. enus and the BeoRemoteOne li
… brings up programme information … brings up programme information
our Bang& Olufsen television. our Bang
RAF
RAF
AF
RA
AF
RAF
RAF
A
A
A
A
AF
AF
RA
A
RA
A
AF
AF
RA
RA
RA
RA
A
A
RA
RA
RA
RA
A
A
RA
RA
RA
RA
A
RA
A
A
A
A
A
RA
RA
A
A
A
AF
A
A
AF
RA
RA
RA
RA
RAFT
GUIDE
… brin
your Bayo
F
RA
RA
RA
RA
RA
RA
RA
A
RAF
AF
AF
AF
AF
AF
A
A
A
A
AF
AF
DR
R
R
R
R
R
R
R
DR
R
R
R
R
R
T
ecec
nu, you mnu, you
our light and coour light
8
, , and … arrow buttons left, right, up
and down allow you to move in menus and
in the BeoRemoteOne display. Use to
return to previous level/item. Use to
open a list of options or make a selection.
(Centre button) … allows you to select or
activate a menu or item.
  (Coloured buttons)… allow you to
select colour specific functions. It will be
explained in the guide for your Bang&
Olufsen product when and how to use the
buttons.
and … search backwards or forwards
step by step. The buttons have dierent
functions depending on your Bang&
Olufsen television or music system. See
the guide for your system for more
information.
(Play) … start playback of a track, file or
recording or start replay.
(Pause) … pause playback of a programme
or recording.
P+/P- … allows you to step through TV
channels and radio stations.
(Standby) … switch your product to
standby. Long press switches all products
in your system to standby.
/ … allows you to adjust the volume
up and down. To mute, press in the middle
of the button, press again to bring back
the sound.
>> BeoRemoteOne in detail
DRAFT
ucts ucts
FT
/
FT
… allows you to adjust the vo
ou to adj
up and down. To mute, press in
e, press
of the button, press again toof the button, press again to
the sound. the
AF
AF
AF
AF
AF
AF
AF
A
AF
A
A
AF
A
A
F
AF
AF
A
A
F
F
AF
AF
AF
AF
9
Access your favourite content using MyButtons
You can personalise your
BeoRemoteOne, using the
MyButtons and the TV and MUSIC
buttons.* You can save a snapshot
of a current viewing and listening
experience to be able to restore it
quickly with just one touch of a
button. For more information, see
the guide for your television.
You can also dedicate a source to
one of the MyButtons, and use it to
switch on the source directly.
Note that not all products support the
MyButton function. For more information,
see the guide for your product.
*The TV and MUSIC buttons can be
personalised the same way as the MyButtons
when you operate a Bluetooth based
product and you will still be able to select
sources from the lists brought up in the
remote control display.
Save and use a snapshot
Depending on your remote control, you can
save up to six snapshots which can be
activated by the MyButtons, the TV button
and the MUSIC button. Your television must
be switched on and a source must be
selected. A snapshot includes the settings
made for the selected source, for example,
stand positions and sound adjustment.
To save a snapshot …
Press and hold one of the
MyButtons, the TV or MUSIC
button to save the current
viewing or playback experience
Depending on your television, a
menu may appear on the
screen for you to select specific
settings to include in the
snapshot
If you save a snapshot with a button where a
snapshot has already been saved, the
existing snapshot will be replaced by the new
snapshot.
Use a MyButton for a specific source
You can select a source you want to activate
each time you press one of the MyButtons.
To set up a MyButton for a specific source...
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Advanced
Press to bring up Buttons
Press to select one of the
MyButtons
Press to step in the list of
sources**
Press to store the source you
want to activate with the
MyButton
To use a snapshot …
Press the button dedicated for
the desired snapshot
If the item saved as a snapshot is no longer
available, the snapshot will still be restored,
but the item played will follow normal source
behaviour for the selected source.
...
LIST
Settings
Advanced
Buttons
**Select MyButton in top of the list if you
want to use the button to save a snapshot,
instead. This function is not available when
you use BeoRemoteOne for operation of a
‘Beo4’ product.
Use the MyButtons and the TV and MUSIC
buttons to access your favourite content with
one touch of a button.
DRAFT
ion, a on, a
he
elect specific
de in the
save a snapshot with a button where a snapshot with a button w
apshot has already been saved, the lready been saved, the
existing snapshot will be replaced by the new t will be replaced by the new
snapshot. snaps
R
Use a MyButton forUse a MyButton for
You can select a sYo
each time youeach
To set uset u
Pres
t
To use a snapshotTo use a snapshot
…
Press the button dedicated for Press the button ded
the desired snapshot shot
If the item saved as a snapshot is n
napshot is
available, the snapshot will stillvailable, the snapshot will still
but the item played will follobut th
behaviour for the selectbe
F
F
F
AF
T
T
T
T
T
ButtonsButtons
to access your fto acces
ouch of a button.ouch of
10
Customise your remote control
Show/hide sources or functions
The BeoRemoteOne distinguishes
between two main types of sources
for the product you operate. The TV
button allows you to access TV
sources and the MUSIC button
allows you to access music sources.
If your products are connected in a
BeoLink setup, you can also access
linked sources (marked with a link
symbol ), if available. For more
information about linked sources,
see pages 24–29.
The sources available depend on your
product and your setup. The LIST button
relates to the source you have selected.
You can press the LIST button to bring up
extra functions in the display to help you
operate the active source, just as if you
were bringing up extra buttons.
If you have paired your BeoRemoteOne to
a Bluetooth product, settings for sources
and functions are typically received from
the paired product for you to enjoy the
advantage of making settings only one
place. Consequently, the settings are not
made in the remote control. For more
information, see the guide for the paired
product. If settings are not received from
the paired product or if you operate an IR
product, you can customise a
BeoRemoteOne to suit your product. You
can show/hide and rename sources or
functions for the TV, MUSIC and the LIST
buttons related to each main source and
change the order in which sources and extra
functions appear when you bring them up.
For Bluetooth products, settings for sources
and functions are typically received from
the paired product. For IR products, you
can show or hide sources to be listed when
pressing the TV button and MUSIC button.
You can also show or hide functions for the
LIST button related to TV and MUSIC
sources.
Note that, if all sources are hidden, no
sources are available when pressing the TV
or MUSIC button.
To show/hide sources or functions for the TV,
MUSIC or LIST buttons...
Press to bring up Settings in
the BeoRemoteOne display
Press to select the list you
want to edit, TV sources,
MUSIC sources, LIST for TV or
LIST for MUSIC
Press to select Show
Press to select the source or
function to show or hide
Press to switch between
show or hide (no selection)
Continue with the next source
or function to show or hide.
Or...
…press to back up through
previous menus, or press and
hold to exit the menu
completely
LIST
Settings
...
Show
...
...
TV
HOMEMEDIA
You can addone or more items to be shown
in the BeoRemoteOne lists.
DRAFT
m m
he he
ly one ly one
ngs are not ngs are
l. For more or more
ide for the paired paired
are not received from not received from
uct or if you operate an IR uct or if you operate an IR
can customise a can customise a
teOne to suit your product. You teOne to suit your product. Yo
ow/hide and rename sources or ow/hide and rename sources or
ns for the ns for th
TV
,
MUSIC
and the
LISTIST
ated to each main source and ated to each main source and
der in which sources and extra der in which sources and ext
when you bring them upwhen you bring them u
V
ns for the ns for the
TV
,
V
in n
splay
select the list you ect the list you
to edit,
TV sourcesTV sources
,
USIC sources
,
LIST for TV LIST
or
LIST for MUSIC
Press to select Press to
Showw
Press to select the source or ess to select the source or
function to show or hidefunction to show or hide
Press to switch betwe
showsh
R
or
hide (no
Continue wContinu
or functunct
Or..
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
AF
AF
A
F
AF
AF
AF
Settings
AF
AF
AF
AF
AF
A
T
T
T
You can addone or more items to be sho
or more
in the BeoRemoteOne lists.One lists.
11
>> Customise your remote control
Rename sources or functions
For Bluetooth products, settings for sources
and functions are typically received from
the paired product. For IR products, you
can rename the sources to be shown when
pressing the TV button and MUSIC button.
You can also rename functions for the LIST
button dedicated to each source, LIST for
MUSIC and LIST for TV.
To rename a source or function* for the TV,
MUSIC and LIST buttons...
Press to bring up Settings in
the BeoRemoteOne display
Press to access the list of
sources or functions to
rename; TV sources, MUSIC
sources, LIST for TV or LIST
for MUSIC
Press to bring up Rename
Press to select the source or
function* to rename**, such as
WEBMEDIA
Press to step between
characters*** and the icons at
the end of the spelling line****.
Or,…
…press to step in the
predefined list of names
Press to select a character,
number or symbol**** or a
name from the predefined
list*****
Press to delete**** the last
character, number or symbol
or press and hold to remove all
text
Press to find the store icon 
to store the name
*If you want to rename a product instead,
press LIST to bring up Settings. Select
Advanced and bring up Products. Follow
instructions to rename your product.
**When you rename a source in
BeoRemoteOne, it may be a good idea to
rename the source in the television or music
system as well, if possible.
***You can only use latin characters for
naming sources or functions. If a character
contains special symbols, you can press
MENU while the character is highlighted to
access a list of special characters to select.
****Use the icons at the end of the spelling
line to switch between upper case/lower
case , to access numbers , symbols
, delete and store .
*****You can also enter numbers using the
BeoRemoteOne number buttons 0 to 9.
LIST
Settings
...
Rename
...
AirPort Express
AppleTV
DRAFT
ve all e all
store icon 
AF
namename
*If you want to rename a product instead
name a p
press
LIST
to bring up up
T
SettingsSettin
. Selec
Advanced
and bring up
d
Products
Produc
instructions to rename your pronstructions to rename your pro
**When you rename a sourc**Whe
BeoRemoteOne, it mayBe
rename the source in
system as well, if
***You can only
naming sonam
containcontai
MEE
R
R
R
R
R
R
AF
F
F
AF
AF
AF
AF
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
AirP
12
>> Customise your remote control
Move sources or functions
For Bluetooth products, settings for sources
and functions are typically received from
the paired product. For IR products, you
can change the order in which the listed
sources appear when pressing the TV
button and MUSIC button for the product
you operate. You can also move functions
for the LIST button dedicated to each
source, LIST for MUSIC and LIST for TV.
Note, however, that you cannot move the
Settings menu, which is always placed at
the bottom of the list.
To move a source or function* for the TV,
MUSIC and LIST buttons...
Press to bring up Settings in
the BeoRemoteOne display
Press to access the list of
sources or functions to move,
TV sources, MUSIC sources,
LIST for TV or LIST for MUSIC
Press to bring up Move
Press to select the source* or
function to move, such as
WEBMEDIA
Press to move the list behind
the selected item
Press to place the item in the
list
Continue with the next source
or function to move. Or...
…press to back up through
previous menus, or press and
hold to exit the menu
completely
Move the list behind the selected item , and
use the centre button to place the item in the
list.
* If you want to move a product instead, press
LIST to bring up Settings. Select Advanced
and bring up Products. Follow instructions to
move your product. Note, however, that the
active product is always placed in top of the
LIST.
LIST
Settings
...
Move
...
TV
...
35
HOMEMEDIA
DRAFT
or
as
Move the list behind the selected item
hind the
T
use the
centre
button to place the item
on to plac
list.
* If you want to move a prod* If you
LISTLIS
to bring up
T
Setting
and bring up
Produc
move your produ
active produc
LISTLIS
T
R
DR
R
ove
R
R
R
R
...
DR
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
F
F
T
35
HOME
13
Make settings for the display
You can change the settings for display time
out and for display brightness on your
BeoRemoteOne.*
Change the display time out …
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Display
Press to select Time out
Press to step between the
settings for display time out
Press to store the setting
*Note that the longer the display is lit and the
brighter the display, the more often the
batteries need to be changed.
Set the display brightness…
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Display
Press to bring up Brightness
Press to step between the
settings for display brightness
Press to store the setting
BeoRemoteOne display settings
LIST
Settings
Display
Time out
...
LIST
Settings
Display
Brightness
...
From the factory, the display time out is 10
seconds.
10 seconds
5 seconds
15 seconds
Medium
Low
High
From the factory, the display brightness is
Medium.
DRAFT
nessess
etting
F
F
ness
F
F
F
F
AF
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
AFT
F
From the factory, the display time out is
y, the disp
seconds
.
T
T
10
14
Maintenance
Wipe the BeoRemoteOne remote control
with a soft, lint-free, wet cloth which is
wrung firmly.
Note! Never use alcohol or other solvents to
clean any part of the remote control!
Cleaning BeoRemoteOne
Changing the batteries of BeoRemoteOne
When the battery warning appears in the
BeoRemoteOne display, it is time to change
the batteries in the remote control.
The BeoRemoteOne requires two batteries.
We recommend that you use 1.5 volt (size
AAA) batteries only.
Replace the batteries as shown in the Quick
guide enclosed with your BeoRemoteOne.
When the battery warning appears in the
display you cannot use the display related
functions until you have changed the
batteries.
DRAFT
ol ol
isis
Note! Never use alcohol or other solvents Note! Never use alcohol or o
clean any part of the remote control!n any part of the remot
AF
e e
lated lated
the the
15
Add more products
From the factory, BeoRemoteOne
is set up for use with a television
(such as BeoVision) only.
If you want to use BeoRemoteOne
with a new type of Bang& Olufsen
product or if you want to use the
same BeoRemoteOne to operate
more than one product, the product
must be shown in the
BeoRemoteOne LIST for you to
select it.
The products you operate with
BeoRemoteOne are divided into three
types:
– Televisions
(default BeoVision):
8 dierent product Options
– Music systems
(default BeoSound):
8 dierent product Options
– ‘Beo4’ products* (default Beo4VIDEO,
Beo4 AUDIO etc.):
4 dierent product Options
The Option settings allow your
BeoRemoteOne to operate your IR
products individually. If, for example, you
have two televisions in the same room and
commands from your BeoRemoteOne can
be received by both, you must set up each
of the televisions as an individual product,
and set them to the correct Options if they
are IR based. You do not set an Option for a
Bluetooth product as it automatically sends
the corresponding information to your
remote control, which it is paired with.
The settings you make for your
BeoRemoteOne are saved for the active
product. To find out how to switch to
another product, see page 17.
Note! If a Network Link product is intended
for operation with Beo4, you must set it up as
a ‘Beo4’ product instead. For more
information, see pages 18–20.
Step 1 – Add or remove a product in the LIST
In order for BeoRemoteOne to operate a
new IR based product, you must first add
the product to the BeoRemoteOne LIST for
you to select it. For Bluetooth products, see
page 4.
Then you must set up the individual IR
products to a specific Option in the Product
Option menu for the products to recognise
your BeoRemoteOne, see page 16.
To add or remove a product
found via the LIST button...
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Advanced
Press to select Products**
Press to select Show
Press to select the product to
show or hide, such as
BeoVision(2)
Press to switch between show
or hide (no selection)
Continue with the next
product to show or hide. Or...
…press to back up through
previous menus, or press and
hold to exit the menu
completely
When you have added a product to the LIST,
you always find the active product in the top
when you press LIST.
* For information about how to use and
operate a ‘Beo4’ product with
BeoRemoteOne, see pages 18–20.
** Note that Bluetooth products must be
paired to be visible in the list.
Note that you can rename an IR product or
change the order in which it appears when
you bring it up via the LIST button. This is
done in the same way as sources or functions
are renamed or moved for the TV, MUSIC and
LIST buttons, see page 11 and page 12.
LIST
Settings
Advanced
Products
Show
...
...
Active product
Mute
BeoVision
Stand
DRAFT
IR IR
xample, you xample,
same room and me room
BeoRemoteOne can One can
, you must set up each u must set up each
s as an individual product, s as an individual product,
to the correct Options if they to the correct Options if
ed. You do not set an Option for a ed. You do not set an Option fo
oth product as it automatically sends oth product as it automatically send
responding information to your responding information to your
ntrol, which it is paired with. ntrol, wh
make for your make for
saved for the actisaved for the acti
w to switch w to switch
77
..
p
Advanced
ess to select
Products*Produ
*
Press to select ss to s
Show
Press to select the product tPress to select the product t
show or hide, show or hide,
such as such as
BeoVision(2)
Press to switchPres
DR
oror
hide (hide
Con
When you have added a product to th
When you have added
you always find the active product in the
the active
when you press
LISTT
T
*
For information about how to For information about how to
operate a ‘Beo4’ product wopera
BeoRemoteOne, Be
see pa
**
Note that Blueto
paired to be vp
Note thNote t
chaha
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
F
AF
AF
A
F
LIST
F
F
F
Set
F
AF
AF
AF
vanced
AF
Pro
AF
T
T
Stand
16
>> Add more products
Step 2 – Set up your IR product to the correct Option
If you use BeoRemoteOne for a new IR
product or for two or more IR products of
the same type, for example, two televisions
and commands from BeoRemoteOne can
be received by both products, the individual
products must be able to recognise your
BeoRemoteOne. Therefore, you must set
up your product to one of the dierent
product Options using the Product Option
menu. You do not set an Option for a
Bluetooth product as it automatically sends
the corresponding information to your
remote control, which it is paired with.
Depending on your setup, you can select
whether or not you want the product to
react to commands from your
BeoRemoteOne.
For information about which Option to use,
see the guide for your television or music
system.
Note! If a Network Link product is intended
for operation with Beo4, you must set it up
as a ‘Beo4’ product instead. For more
information, see pages 18–20.
To give your product a specific Option using
BeoRemoteOne…
Point your remote control at the IR-receiver
of the product you want to Option
programme. The distance between the
remote control and the IR-receiver must be
maximum 0.5 metres.
Press to bring up Settings in
the BeoRemote One display
Press to bring up Advanced
Press to bring up Product
Option
Select if you want the product
to be IR responsive or IR
blind*
Select the active product, such
as BeoVision
Select a product Option** for
your product, such as
BeoSound
Select Send and press the
centre button to store the
selected Option
LIST
Settings
Advanced
Product
Option
...
...
...
Send
* Select IR responsive when you want your
product to react to commands from your
BeoRemoteOne and IR blind when you do
not want your product to react to remote
control commands.
** In order to show the product Option, such
as BeoSound, in the BeoRemoteOne display
when you press LIST, you must add it to the
BeoRemoteOne LIST, see page 15.
DRAFT
oduct
lect if you want the product ant the product
to be
IR responsiveive
or or
IR
blindblind
*
Select the active product, such ct the active product, su
as
BeoVisionBeoVi
Select a product Opt
your product, sucyo
BeoSoundBeoS
Select ect
SS
cent
F
F
AF
AF
A
F
F
F
Adv
F
AF
AF
AF
oduct
on
AF
AF
A
A
A
A
T
A
nn
o show tho show
oundound
, in the Beo, in
dd
d
n you press n you pre
LIST
, you m
T
eoRemoteOne eoRemoteOn
LIST
,
T
see pag
17
>> Add more products
Switch between products using BeoRemoteOne
Normally, you can activate a source, such as
TV, by pressing TV or MUSIC and finding the
relevant source on your remote control.
However, when you have more products,
you must select the product before you can
operate its sources. You switch between the
products via LIST.
To switch between products …
Press to bring up the current
product, such as BeoVision, in
the BeoRemoteOne LIST
Select the desired product*,
for example, BeoVision(2) for
a Network Link television, or
Beo4 AUDIO for a ‘Beo4’
music system
Press and select a source, such
as HomeMedia
*To bring up your IR based product, such as
BeoVision(2) in the BeoRemoteOne display,
you must first add it to the BeoRemoteOne
LIST, see page 15.
LIST
...
...
TV
...
LIST
BeoVision(2)
BeoVision
TV
LIST
BeoVision
BeoVision(2)
TV
LIST
Beo4 AUDIO
BeoVision
TV
LIST
BeoVision
Beo4 AUDIO
MUSIC
Example of remote control operation when
you switch between a television with Network
Link and a music system with Master Link.
Example of remote control operation when
you switch from one television with Network
Link to another.
DRAFT
as as
display, display,
moteOne moteOn
F
F
F
F
F
F
F
F
F
F
FT
T
T
FT
FT
FT
FT
T
T
on
V
T
T
FT
T
Beo
MU
FT
FT
Example of remote contEx
you switch between
Link and a music
ntrol operation when eration w
e television with Network th Network
18
Using BeoRemoteOne for a ‘Beo4’ product
You can use BeoRemoteOne for
operation of a Master Link television
or music system, which is normally
operated with Beo4. The product
must be shown in the
BeoRemoteOne LIST to select it.
When a ‘Beo4’ product is selected,
the BeoRemote One LIST contains
the same functions as you find in
the Beo4LIST. However, you cannot
select sources via LIST. To find out
how to use BeoRemoteOne if you
normally use Beo4, see page 21.
In order to operate your ‘Beo4’ product
with BeoRemoteOne, you must set it to the
correct Option, see page 19.
When you use BeoRemoteOne to operate a
‘Beo4’ product, the MyButtons are
dedicated to the buttons corresponding to
the DTV, DVD, A.MEM and CD buttons on
Beo4. You can change this at any time and
dedicate the MyButtons to activate another
source directly, see page 20. However,
when you use BeoRemoteOne for
operation of a
‘Beo4’ product, you cannot use
the MyButtons
and the TV and MUSIC
buttons to save a snapshot of a current
viewing or playback experience.
You can also activate a specific source when
you press the TV and MUSIC button, when
BeoRemoteOne is used for operation of a
‘Beo4’ product, see page 20.
For information about how to switch from a
‘Beo4’ product to another type of product,
see page 17.
Step 1 – Add or remove a ‘Beo4’ product in the LIST
When you want to use BeoRemoteOne to
operate a ‘Beo4’ product, you must first
add the product to the BeoRemoteOne
LIST.
Then you must set up the product to the
correct Option, see page 19.
Note that you can also rename a product or
change the order in which it appears when
you bring it up via the LIST button. This is
done in the same way as sources or
functions are renamed or moved for the TV,
MUSIC and LIST buttons, see page 11 and
page 12.
To add or remove a ‘Beo4’ product found via
the LIST button...
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Advanced
Press to select Products
Press to bring up Show
Press to select the ‘Beo4’
product to show or hide.
Options are: Beo4AUDIO,
Beo4VIDEO, Beo4AV or
Beo4LINK
Press to switch between show
or hide (no selection)
Continue with the next
product to show or hide. Or...
…press to back up through
previous menus, or press and
hold to exit the menu
completely
Select one of the four ‘Beo4’ products,
Beo4VIDEO, Beo4AV, Beo4AUDIO, or
Beo4LINK:
– Beo4VIDEO is used for a ‘Beo4’ television
in Option 1 or 5.
– Beo4 AV is used for a ‘Beo4’ television in
Option 2 or 6.
– Beo4AUDIO is used for a ‘Beo4’ music
system in Option 1, 2, 5 or 6.
–Beo4LINK is used for the second ‘Beo4’
product, when two televisions or music
systems are placed in the same room.
Note! If a Network Link product is intended
for operation with Beo4, you must set it up
as a ‘Beo4’ product instead.
LIST
Settings
Advanced
Products
Show
...
...
Beo4 AV
Beo4 VIDEO
Beo4 AUDIO
D
r
u cannot use u cannot
MUSICMUSIC
t of a current a current
perience.
ivate a specific source when vate a specific source when
TVTV
and and
MUSICC
button, when button, w
teOne is used for operation of a teOne is used for operation of
product, produc
see page 20
.
ation about how to switch from a ation about how to switch from a
t to another type of product, t to another type of product
F
r the r the
TVTV
,
ge 11ge 11
g
and an
o4’ product found via oduct found via
p
Settings
in
oteOne displayoteOne d
Press to bring up p
AdvancedAdvanced
Press to select s to s
Productsts
Press to bring up Press to bring up
ShowShow
Press to selectPres
product toproduct
Optionstions
Beo
B
Select one of the four ‘Beo4’ products,
e four ‘Be
Beo4
VIDEO
,
O
Beo4
AVAV
,,
VV
V
Beo4Beo4
AUDIO
Beo4
LINK
:
K
–
Beo4VIDEO Beo
is used for a ‘Beo‘Beo
in Option 1 or 5. in O
– –
Beo4 AVB
is used for a ‘
Option 2 or 6.
–
Beo4AUDIO
is
system in O
––
Beo4LINBe
prodpro
ss
AF
A
A
AF
LIST
AF
AF
AF
AF
A
A
A
A
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
B
19
>> Using BeoRemoteOne for a ‘Beo4’ product
When you use BeoRemoteOne for a ‘Beo4’
product, the Product Option menu is
adapted to match the Option settings
available with your Beo4 remote control.
To Option programme a ‘Beo4’ product
using BeoRemoteOne …
Point your remote control at the IR-receiver
of the product you want to Option
programme. The distance between the
remote control and the IR-receiver must be
maximum 0.5 metres.
Press to bring up the current
product, such as BeoVision, in
the BeoRemoteOne LIST
Select the product that you
want to Option programme,
such as Beo4 LINK
Press to bring up Settings
Press to bring up Advanced
Press to bring up Product
Option
Select the appropriate Option:
V.OPT., A.OPT. or L.OPT.
Enter the appropriate number
(0, 1, 2, 4, 5 or 6)
Step 2 – Set up your ‘Beo4’ product to the correct Option
LIST
...
...
LIST
Settings
Advanced
Product
Option
...
0 – 6
A.OPT.
V.OPT.
L.OPT.
Select one of the three ‘Beo4’ Options,
V.OPT., A.OPT. or L.OPT..
Options…
– Option0: The product is connected to
another product in the same room and is
operated through the other product.
– Option1: The product is connected to
another product in the same room and you
can operate the product directly or
through the other product.
– Option2: The main product may or may
not be connected to a product in another
room and is operated directly with
BeoRemote One.
– Option4: Used when two televisions or
music systems are placed in the same
room and one is either a Network Link
product or a Master Link product set to
Option 1 or 2. This ensures that the other
television or music system behaves as a
link product.
– Option5: The television (or music system)
is connected to the main Master Link
product in another room and to a Master
Link music system (or television) in the
same room and both television and music
system in the room can be operated
directly.
– Option6: The product is connected to the
main product in another room and can be
operated directly.
DRAFT
oduct
he appropriate Option: he appro
OPT.OPT.
or or
L.OPT. L
e number e number
R
R
DR
DR
D
R
R
R
Adv
R
DR
DR
DR
ct
Op
DR
D
D
D
.
D
D
0 –
pp
roduct iroduct
perate the prodperate th
ough the other produough th
OO
ption2: The main product ption2: The
not be connected to a product i
not be connecte
room and is operated directly with
room and is operate
BeoRemote One. ne.
–
O
ption4: Used when two television
hen two t
music systems are placed in the
aced in t
room and one is either a Netroom and one is either a Net
product or a Master Link pro
Option 1 or 2. This ens
television or music
link product.
–
O
ption5: Th
is conneis
prodprod
LL
20
>> Using BeoRemoteOne for a ‘Beo4’ product
When you use BeoRemoteOne to operate a
‘Beo4’ product, the MyButtons are
dedicated to the buttons corresponding to
the DTV, DVD, A.MEM and CD buttons on
Beo4. You can change this at any time and
select which source you want to activate
each time you press one of the MyButtons.
You can also dedicate a source to the TV or
MUSIC button and use each button to
activate a TV or MUSIC source directly.
Note that you cannot use the MyButtons and
the TV and MUSIC buttons to save a snapshot
of a current television viewing or playback
experience when you use BeoRemoteOne
for operation of a ‘Beo4’ product.
To set up the MyButtons and the TV or
MUSIC button for activating a specific
source...
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Advanced
Press to bring up Buttons
Select between the MyButtons,
the TV or MUSIC button
Press to step in the list of
sources*
Press to store the source you
want to activate with the
selected button
Set up the MyButtons and the TV or MUSIC button for a specific source
LIST
Settings
Advanced
Buttons
...
...
Set up the MyButtons and the TV and MUSIC
buttons to activate a source directly.
*When you have selected the TV or MUSIC
button, you can choose None if you do not
want the TV or MUSIC button to activate a
specific source.
DRAFT
yButtons, s
tton
step in the list of p in the list of
es*
Press to store the source you e source you
want to activate with the want to activate with the
selected buttonselected
F
AF
AF
F
F
F
Butto
F
AF
AF
AF
...
AF
AF
AF
AF
A
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
p the p the
MyButtonsMy
and
uttons to activate a source diuttons to acti
*When you have selected the *When you have selec
TV
or
V
M
button, you can choose choose
NoneN
if you do n
want the
TV
or
V
MUSICIC
button to activa
butto
CC
specific source.
21
Beo4 and BeoRemoteOne conversion
If you are used to operate your product with Beo4, below conversion helps you find out which button to use on
BeoRemoteOne when you operate a ‘Beo4’ product. BeoRemoteOne buttons are marked with blue. The buttons
which have exactly the same function on Beo4 and BeoRemoteOne are light grey.
TV LIGHT RADIO
DTV DVD CD
V.MEM TEXT A.MEM
789
456
LIST 0MENU
123
STOP PLAY
BACK
TV: …use the TV button on BeoRemoteOne.
This also displays a list of TV sources.
V.MEM: …press TV to bring up TV sources
and find V.MEM in the BeoRemoteOne
display.
A.MEM:…press MUSIC to bring up music
sources and find A.MEM in the
BeoRemoteOne display.
LIGHT: …press LIST and find LIGHT in the
BeoRemoteOne LIST.
RADIO: …use the MUSIC button on
BeoRemoteOne. This also displays a list of
music sources.
DTV, DVD, A.MEM, and CD: …use the
MyButtons* on BeoRemoteOne. DTV: ,
DVD: , A.MEM: and CD:
TEXT: …press LIST and find TEXT in the
BeoRemoteOne LIST.
LIST: …press LIST on BeoRemoteOne.
The LIST contains the same functions as
Beo4. Note that you cannot select sources
via LIST, use the TV and MUSIC buttons
instead.
Navigation button: …use the arrow buttons
, , and on BeoRemoteOne.
Search backwards or forwards: …use and
on BeoRemoteOne.
and : …use P+/P- on BeoRemoteOne.
STOP: …press (Pause) on
BeoRemoteOne.
BACK: …press (Back) on
BeoRemoteOne.
PLAY: …use (Play)on BeoRemoteOne.
Note! The INFO and GUIDE buttons have no
function when you operate a ‘Beo4’ product
with BeoRemoteOne.
TV
HOMEMEDIA
MENU: …press (Home) on
BeoRemoteOne.
*You can change this at any time and
dedicate the MyButtons to activate another
source directly, see page 20.
DRAFT
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
DRA
DRA
R
R
DR
DR
DR
DR
DR
R
R
R
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A.MEM
A
A
A
A
A
A
A
A
A
A
A
A
A
A
RA
RA
RA
RA
RA
9
RA
RA
RA
RA
RA
RA
RA
RA
R
R
RA
RA
RA
RA
4
RA
RA
RA
RA
RA
RA
RA
RA
R
R
R
R
R
R
R
RA
RA
RA
RA
RA
RA
RA
RA
RA
RA
R
R
RA
RA
RA
RA
RA
RA
RA
RA
RA
D
D
D
D
D
D
D
D
DR
DR
DR
DR
DR
DR
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
DR
R
R
RA
RA
RA
RA
RA
RA
RA
RA
RA
RA
RA
RA
RA
T
T
LIGHTHT
::
……
press pres
LISTT
and find and fin
TT
LIGHT
in the
T
BeoRemoteOne LIST.moteOne LIST.
RADIO
:
…
use theuse the
MUSICM
button on
C
BeoRemoteOne. This also displays a lisne. This a
music sources.m
DTV, DVD, A.MEM, DTV, DVD, A.ME
and
CDCD
d
::
MyButtons* on BeoRemotButtons* on BeoRemo
DVDDVD
: :
,
A.MEMM
: :
an an
TEXTT
:
…
press
L
BeoRemoteB
emoteOne. emoteO
me functions as functions
nnot select sources t sources
TV
and
V
MUSIC
buttons ttons
instead.d.
STOPSTOP
:
…press
D
(
Pause
(
))
e
on on
BeoRemoteOne.eOne.
…press …press
((
BackBack
((
(
BeoRemoBeoRemo
MENUMEN
BeoBeo
22
You can change the display language of
your BeoRemoteOne at any time. Once a
language is chosen, all menus and display
messages are shown in this language.
Note that to rename sources or functions,
you can only use latin characters.
If by accident, you have chosen a language
you do not want, you can enter the language
menu by pressing LIST, then press the arrow
button up one step and press the centre
button. Press the arrow button up one step
followed by the centre button twice more.
Set the language of your BeoRemoteOne You have access to make more
advanced settings of your
BeoRemoteOne from the
Advanced menu. You can, for
example, change the display
language and you can reset your
BeoRemoteOne to factory settings.
You can also set the IR strength if
you use BeoRemoteOne to operate
more than one ‘Beo4’ product.
If you use your BeoRemoteOne for
operation of lights, curtains or blinds, you
can make settings for this in the LIGHT and
CONTROL menus when operating an IR
product, whereas similar settings are made
in the product itself when operating a
Bluetooth product. This may require a
supported Home Automation System.
Contact your Bang& Olufsen retailer for
more information.
BeoRemoteOne advanced settings
You can reset your BeoRemoteOne to
factory settings.
To reset your BeoRemoteOne...
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Advanced
Press to bring up Factory reset
You will be asked to confirm
the reset. Press to confirm the
reset or,…
…press and hold to exit the
menu without resetting
Reset your BeoRemoteOne
To set the language of BeoRemoteOne...
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Advanced
Press to bring up Language
Press to step between
languages
Press to select the language
you want to use
LIST
Settings
Advanced
Language
...
LIST
Settings
Advanced
Factory
reset
To confirm the reset press the centre button
or press to cancel.
Note! When you reset, all settings you have
made for your BeoRemoteOne, including
pairings, will be deleted.
All settings will
be lost. Please
BNMÿQLNQ
cancel.
DRAFT
w
rere
one step one step
ce more. ce more
You can reset your BeoRemoteu can reset your BeoRemot
factory settings. factory settings.
To reset your BeoRem
Press to bring upP
the BeoRemotthe B
P
RA
Reset your BeoRemoteOne Reset your BeoRemo
to bring up to bring
Advance
Press to bring up
Language Langua
Press to step between Press
languages lan
Press to select th
you want to uy
T
T
T
T
23
>> BeoRemoteOne advanced settings
You can set up the IR strength of your
BeoRemoteOne when operating IR
products. If, for example, you use
BeoRemoteOne for several ‘Beo4’ products
and they are placed in close proximity, you
can reduce the IR strength of the remote
control.
To set the IR strength of BeoRemoteOne...
Press to bring up Settings in
the BeoRemoteOne display
Press to bring up Advanced
Press to bring up IR strength
Press to step between the
settings for IR strength
Press to store the setting
Set the IR strength of BeoRemoteOne
LIST
Settings
Advanced
IR strength
...
DRAFT
etting
F
F
ngth
F
F
F
F
AF
24
A TV with Network Link and a music system with Master Link in the
same or separate rooms
BeoLink setup
In this setup, the Network Link TV is either an
IR based TV named BeoVision per default or
a Bluetooth TV with a TV product name and
the Master Link music system must be set up
as Beo4 AUDIO. If your Master Link product
is a TV, it must be set up as Beo4 VIDEO
instead. For information about how to set up
your product, see page 15 and page 18.
You have a list of TV and MUSIC sources for
each product type: BeoVision or TV product
name and Beo4 AUDIO or Beo4 VIDEO.
When you use BeoRemoteOne for
operation of more products and the
products are connected to the
same network, you can access
sound from sources of the other
products in the network. The
products can be placed in the same
or separate rooms. For more
information about how to connect
and set up your product, see the
guide for your television or music
system.
BLC
TV
HomeMedia
HDMI 1
TV
HOMEMEDIA
V.MEM
RADIO
Access linked sources
from Beo4 AUDIO
Access sources from TV
Default product:
Product name/BeoVision
Product Option:
Beo4 AUDIO
A.MEM
Radio
CD
A.MEM
CD
Continued…
DRAFT
AFT
AF
AF
In this setup, the Network Link TV is either an Network Link TV is either an
IR based TV namedIR based TV named
BeoVisionBeoVision
per default or
a Bluetooth TV with a TV product name ana Bluetooth TV with a TV pr
the Master Link music system must beMaster Link music syste
as
Beo4 AUDIOeo4 A
. If your Master Linkr Maste
is a TV, it must be set up as a TV, it must be set up as
BeoBe
instead. For information aboinstead. For information abo
your product, your product,
see page 1see page 1
g
T
T
T
T
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
AF
AF
A
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
A
AF
A
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AF
AFT
F
AFT
AF
AF
A
AF
F
AF
AF
AF
AF
AF
F
F
FT
T
FT
T
FT
FT
F
F
F
F
F
F
FT
T
FT
T
F
F
F
F
F
FT
FT
AFT
AF
FT
T
FT
T
FT
FT
F
FT
T
FT
T
T
T
T
T
T
T
T
T
T
T
T
T
T
A
AF
F
F
FT
T
T
T
T
T
T
A
A
A
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
FT
H
H
F
Access sources from TV
ccess so
T
T
T
T
F
F
F
F
F
F
F
F
F
F
F
F
F
A.
A
A
AF
Radio
F
F
F
F
F
F
F
CD
C
T
T
T
T
T
25
Example of how to listen to a TV source from
the television...*****
Press to bring up the current
product, such as BeoVision or
the TV product name, in the
BeoRemoteOne LIST
Select the desired product, for
example, Beo4 AUDIO***
Press TV and select the source
you want to ‘borrow’ from the
television, such as
HOMEMEDIA****
To show/hide sources in the IR based TV
using BeoRemoteOne...*
> The television is set up as BeoVision from
the factory and BeoVision is selected in
the BeoRemoteOne LIST.
> Show or hide sources** of the television
via the BeoRemoteOne LIST, see page 10.
> Show or hide linked sources, such as
CD via the BeoRemoteOne LIST, see
page 10.
To show/hide sources in Beo4 AUDIO...
> Select Beo4AUDIO*** in the
BeoRemoteOne LIST.
> Show or hide sources of the music
system via the BeoRemoteOne LIST, see
page 10.
> Show sources you can ‘borrow’ from the
television, such as HOMEMEDIA**** via the
BeoRemoteOne LIST or hide sources, you
do not need, see page 10.
>> BeoLink setup
LIST
...
Beo4
AUDIO
TV
HOMEMEDIA
*You cannot show or hide sources in a
Bluetooth product using BeoRemoteOne.
Sources are shown in the remote control
display as set in the product.
**Note that available TV sources are shown
in the source list menu of your television.
***In this example, Beo4 AUDIO is already
added to the BeoRemoteOne LIST and the
music system is set up as Beo4 AUDIO.
****If the relevant source, such as
HOMEMEDIA, is not available in the
BeoRemoteOne LIST, contact your retailer.
*****With Network Link you can access
sound from sources of other products in the
network. If you connect your television to a
Master Link product, you must also use a
BeoLink Converter NL/ML (BLC) to obtain
the benefits of Network Link.
DRAFT
F
F
F
F
F
OMEME
pp
e BeoRee BeoR
ystem is set up aystem is s
f the relevant source, sf the rele
OMEMEDIAOMEMEDIA
, is not available i, i
BeoRemoteOne BeoRemoteOne
LISTL
, contact you
T
*****With Network Link you can acce
*****With Network Lin
sound from sources of other products in
ces of ot
network. If you connect your televisio
nect your
Master Link product, you must also
u must a
BeoLink Converter NL/ML (BLCeoLink Converter NL/ML (BLC
the benefits of Network Linthe be
26
Two Bluetooth TVs with Network Link (with one BeoRemoteOne)
Example of how to listen to a linked TV
source...*
Press to bring up the current
product in the
BeoRemoteOne LIST
Select the desired product
name
Press TV and select a
linked source, such as
HDMI 1
>> BeoLink setup
Product name Product name
LIST
...
...
TV
HDMI 1
In this setup, both Network Link TVs are
given a product name. For information about
Bluetooth pairing, see page 4.
You have a list of TV and MUSIC sources for
each television. In the example, only the TV
sources are shown.
You cannot show or hide sources using
BeoRemoteOne. Sources are shown in the
remote control display as set in the product.
*With Network Link, you can access sound
from sources of other products in the
network.
TV
HomeMedia
HDMI 1
Access linked sources from TV
Access linked sources
from TV
Default product: Product Option:
TV
HOMEMEDIA
HDMI 1
DRAFT
AF
ect a ect a
rce, such as rce, such
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
R
DR
D
R
R
R
...
R
DR
DR
DR
DR
DR
TV
DR
DR
DR
D
T
DMI 1
ff
onon
. .
In thIn t
are shown. are show
ou cannot show or hide sourcou cannot sho
BeoRemoteOne. Sources are sho
BeoRemoteOne.
remote control display as set in the pr
remote control display
*With Network Link, you can access sound Link, you can access sound
from sources of other products in the from sources of other products
network.network.
A
27
A Bluetooth TV and an IR based TV with Network Link (with one BeoRemoteOne)
To show/hide sources of the IR based TV
using BeoRemoteOne...*
> Select BeoVision ** in the BeoRemoteOne
LIST.
> Show or hide sources*** of both
televisions via the BeoRemoteOne LIST,
see page 10.
> Show or hide linked sources, such as
HDMI1 of both televisions via the
BeoRemoteOne LIST, see page 10.
Example of how to listen to a linked TV
source...****
Press to bring up the current
product, such as BeoVision or
a product name, in the
BeoRemoteOne LIST
Select the desired product, for
example, BeoVision or a
product name**
Press TV and select a
linked source, such as
HDMI 1
>> BeoLink setup
Product name BeoVision
LIST
...
...
TV
HDMI 1
In this setup, one Network Link TV is given a
product name and the other is BeoVision per
default. For information about Bluetooth
pairing, see page 4. For information about
how to set up your IR based product, see
page 15.
You have a list of TV and MUSIC sources for
each television. In the example, only the TV
sources are shown.
This scenario also applies if you replace the
Network Link television in the example with a
Network Link music systems. Note that the
music system is set up as BeoSound.
*You cannot show or hide sources in a
Bluetooth product using BeoRemoteOne.
Sources are shown in the remote control
display as set in the product.
**In this example, BeoVision is already
added to the BeoRemoteOne LIST and the
TV is set up as BeoVision.
***Note that available TV sources are shown
in the source list menu of your television.
****With Network Link, you can access sound
from sources of other products in the
network.
Note! If a Network Link product is intended
for operation with Beo4, you must set it up as
a ‘Beo4’ product instead. For more
information, see pages 18–20.
TV
HomeMedia
HDMI 1
Access linked sources from
BeoVision
Access linked sources
from Bluetooth TV
Default product: Product Option:
TV
HOMEMEDIA
HDMI 1
DRAFT
AF
DR
One One
th th
teOne teOne
LIST
,
ked sources, such as s, such as
televisions via the
ne ne
LISTLIST
, ,
see page 10see page 1
pg
.
Example of how to listen to a linked TV to listen to a linked TV
source...**** sourc
Press to bring up the current Press to bring up the curren
product, such as duct, s
BeoVisionVision
or
a product name, in the duct
BeoRemoteOne oRem
LIST
Select the desired produSelect the desired produ
example,
BeoVision
product name** p
Press Press
TVTV
a
DR
linkeinke
D
H
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
oo
ave a list of ave a lis
TV
and
M
ach televisionach television
.
In the example
sources are shown. sources are shown
This scenario also applies if you replace t
o applies
Network Link television in the exampl
sion in th
Network Link music systems. Note
stems. No
music system is set up as music
BeoSBeoS
A
28
Two IR based Network Link TVs in separate rooms
To show/hide sources of both TVs using
BeoRemoteOne...
> Both televisions are set up as BeoVision
from the factory and BeoVision is selected
in the BeoRemoteOne LIST.
> Show or hide sources* of both televisions
via the BeoRemoteOne LIST, see page 10.
> Show or hide linked sources, such as
HDMI1 of both televisions via the
BeoRemoteOne LIST, see page 10.
Example of how to listen to a linked TV
source...**
Press TV and select a linked
source, such as HDMI 1
>> BeoLink setup
BeoVision BeoVision
TV
HDMI 1
Access linked sources
Access linked sources
In this setup, both Network Link TVs are
BeoVision per default. If your setup consists
of a Network Link TV and a Network Link
music system, instead, the music system
would be default BeoSound.
You have the same list of TV and MUSIC
sources for both televisions. In the example,
only the TV sources are shown.
Default product:
TV
HOMEMEDIA
HDMI 1
Default product:
TV
HOMEMEDIA
HDMI 1
*Note that available TV sources are shown in
the source list menu of your television.
**With Network Link, you can access sound
from sources of other products in the
network.
Note! If a Network Link product is intended
for operation with Beo4, you must set it up as
a ‘Beo4’ product instead. For more
information, see pages 18–20.
DRAFT
AF
R
DR
nn
elected elected
oth televisions oth tele
LIST
,
see page 10see pag
pg
.
ked sources, such as s, such as
televisions via the
ne ne
LISTLIST
, ,
see page 10.see page 1
pg
Example of how to listen to a linked TV to listen to a linked TV
source...** sourc
Press Press
TVTV
and select a a
RA
linked lin
source, such as rce, su
RA
HDMI 1DMI 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
T
ll
the same list othe sam
ces for both televisionsces for b
nly the TV sources are shownnly the TV sou
A
29
Two IR based Network Link TVs in the same room (with one BeoRemoteOne)
>> BeoLink setup
To show/hide sources of both TVs using
BeoRemoteOne...
> Select BeoVision or BeoVision(2), or the
respective product names,* in the
BeoRemoteOne LIST.
> Show or hide sources** of both
televisions via the BeoRemoteOne LIST,
see page 10.
> Show or hide linked sources, such as
HDMI1 of both televisions via the
BeoRemoteOne LIST, see page 10.
Example of how to listen to a linked TV
source...***
Press to bring up the current
product, such as BeoVision or
a product name, in the
BeoRemoteOne LIST
Select the desired product, for
example, BeoVision(2) or a
product name*
Press TV and select a
linked source, such as
HDMI 1
BeoVision BeoVision(2)
LIST
...
...
TV
HDMI 1
In this setup, one Network Link TV is
BeoVision per default and the other is set up
as BeoVision(2). For information about how
to set up your product, see page 15.
You have the same list of TV and MUSIC
sources for both products BeoVision and
BeoVision(2).
This scenario also applies if you replace one
of the televisions in the example with a
Network Link music systems. Note that the
music system is set up as BeoSound.
*In this example, BeoVision(2) is already
added to the BeoRemoteOne LIST and the
TV is set up as BeoVision(2).
**Note that available TV sources are shown
in the source list menu of your television.
***With Network Link, you can access sound
from sources of other products in the
network.
Note! If a Network Link product is intended
for operation with Beo4, you must set it up as
a ‘Beo4’ product instead. For more
information, see pages 18–20.
TV
HOMEMEDIA
HDMI 1
Access linked sources from
BeoVision(2)
Access linked sources
from BeoVision
Default product: Product Option:
NET RADIO
SPOTIFY
RADIO
DRAFT
AF
DR
the the
f both f both
emoteOne teOne
LISTL
,
D
linked sources, such as such as
both televisions via the oth televisions v
eOne eOne
LISTLIS
,
see page 10e page 10
g
..
Example of how to listen to a linked TV to listen to a linked TV
source...*** sourc
Press to bring up the current Press to bring up the curren
product, such as duct, s
BeoVisionVision
or
a product name, in the duct
BeoRemoteOne oRem
LIST
Select the desired produSelect the desired produ
example,
BeoVision(2
product name* p
Press Press
TVTV
a
DR
linkeinke
D
H
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
T
A
A
A
A
A
A
A
A
A
A
A
A
A
e same le same
for both producfor both
Vision(2)Vision(2)
.
This scenario also applies if you rep
This scenario also a
of the televisions in the example with
of the televisions in th
Network Link music systems. Note that
usic syste
music system is set up as up as
BeoSound
Be
A
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
A
ny changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
this equipment.

Navigation menu