Bang and Olufsen a s RC1 BLE Remote Control User Manual T30 online guide 221215 BUE
Bang & Olufsen a/s BLE Remote Control T30 online guide 221215 BUE
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2858687 |
| Application ID | 2acFGHr4k3bOX/NgAdyNjw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 66.39kB (829864 bits) |
| Date Submitted | 2015-12-29 00:00:00 |
| Date Available | 2016-06-15 00:00:00 |
| Creation Date | 2015-12-28 23:35:08 |
| Producing Software | Acrobat Distiller 10.0.0 (Windows) |
| Document Lastmod | 2015-12-28 23:35:08 |
| Document Title | T30_online_guide_221215_BUE.PDF |
| Document Creator | Adobe InDesign CC 2015 (Windows) |
| Document Author: | Kent |
AF BeoRemote One Contents – Click a headline to move to that section Daily use Introduction to BeoRemote One and the guide, 3 Pairing your remote control, 4 Using your BeoRemote One, 6 BeoRemote One in detail, 7 This guide contains additional information about your BeoRemote One and describes features and functions in detail. Among other things you can find information about settings. This guide will be updated on a regular basis to make it reflect, for example, new features and functions introduced with software updates. produc in the Frequently You can find additional information about your product ng-oluf ng-olufsen.com Asked Questions (FAQ) section on www.bang-olufsen.com/ customerservice. Access your favourite content using MyButtons, 9 Customise your remote control, 10 Make settings for the display, 13 AF Maintenance, 14 Advanced use Add more products, 15 How to add a product to the BeoRemote One LIST and how to give it a specific Option. Using BeoRemote One for a ‘Beo4’ Beo4’ product, 18 How to use BeoRemote One for operation peration of ion or music system a Master Link television which is normally y operated with Beo4. Be Beo4 and BeoRemote One conversion, 21 Find out ut which button to use on mote One, if you are used to Beo4. BeoRemote BeoRemote One ne advanced settings, 22 22 ettings for your remote Make advanced settings control. You can, for example, change the display language or resett your BeoRemote One to factory setti settings. BeoLink setup, 24 How to display and listen to sources from another Bang & Olufsen product when your products are connected to the same network. Version 1.0 1601 Introduction to BeoRemote One and the guide The BeoRemote One is a hand-held remote control which gives easy access to remote operation of your Bang & Olufsen television or music system. With BeoRemote One you can operate both Bluetooth and IR based products. The display on BeoRemote One shows you sources or functions, such as TV, RADIO and STAND, or even the lights. Daily operations are carried out by pressing sing a single button on BeoRemote One, orr by pressing a few buttons in a logicall and straightforward sequence. The BeoRemote One remote control incorporates more functions than just the actual buttons. Extra sources are brought up on the BeoRemote One display using the TV and MUSIC buttons and additional functions can be obtained using the LIST button. Symbols used in this guide To turn the television on a motorised stand … LIST LIS Press to bring up SOUND in the BeoRemote One display ay SOUND Select a sound nd mode Example off BeoRem BeoRemote One operation. Remote mote control operation – A dark dark grey button, such as LIS LIST, y must indicates a physical button you press. – A light light grey ey display text, te such as STAND, BeoRe indicates a BeoRemote One display text. Press LIST, TV or MUSIC on Be BeoRemote One to bring it up. The text appea in the BeoRemote One display. appears m be able to show or hide display You may te texts for LIST, TV and MUSIC, and also rename texts. For more information see page 10 and page 11. – The centre button is symbolised by which is used in the operation sequences when you must press the centre button. Pairing your BeoRemote One Pair or unpair a remote control Depending on your setup, different settings are required for interaction to succeed,. However, common to all setups with a Bluetooth product is that you need to pair your remote control with the product to be able to operate it. First-time setup of your remote control Before setting up your remote control, make sure your product is connected to the mains, and if it is already in use, you must also open your Bluetooth product for pairing.* *See the guide for your Bluetooth product for information on how to open the product for pairing. **See the Quickk guide enclosed with your trol or p pr remote control product for information on how to insert batteries. nsert ba **When your Bluetooth product produ is later ***When connected to the m mains and opened open for pairing, pairing takes place. AF You can operate both Bluetooth and IR based products with your BeoRemote One. To operate a Bluetooth product, you must first make sure that your remote control is paired to the product. BeoRemote One then typically synchronises various settings with the paired products and thereby eases recognition and browsing of sources and functions in the display. Pairing is not used for IR based products. Consequently, you should skip the pairing process during firsttime setup. For information about Option programming of IR products, see page 16. When pairing BeoRemote One to a Bluetooth product, the product provides a product name to be used in the remote control display. Settings for sources and different functions are then typically set in he the Bluetooth product, instead of in the remote control. After timeout of a welcome screen in the display, play, set the preferred language nguage ... .. If a Bluetooth uetooth product is opened ened for pairing, ring, pairing takes place.* Otherwise... erwis if you ...select Pairing ou have a Bluetooth etooth product and forg forgot to open pen it for pairing***, or select ect Skip Sk pairing if you u have an IR product ... Your remote control iis now ready for use re ontrol ol to a number nu You can pair your remote control of Bluetooth products, and a Bluetooth ooth ed to a number of product can be paired Bluetooth remote e controls. Put in fresh batteries in your remote control** and place yourself in front of the product duct uct Continued … >> Pairing your BeoRemote One Pair a remote control already in use If you want to pair a BeoRemote One already in use with another Bluetooth product, you must open both your remote control and the product for pairing. To open a product for pairing, see the guide for it. Unpair a remote control It is also possible to unpair your remote control from a Bluetooth product. Press to bring up Settings in the BeoRemote One display LIST See the name of BeoRemote One See the name of BeoRemote One as it is seen on a television you have paired it with. Press to bring up Settings in the BeoRemote One display Settings Press to bring up Settings in the BeoRemote One display LIST Settings LIST Settings Press to bring up Pairing Presss to bring brin up Pairing Pairing Pairing Press to bring up Pairing Press to bring up Remove Press to bring up p Name AF Pairing Remove emove Press to bring up Pair Pair From the list of products found, press to select a product to pair with ... From the list of products paired, press to select a product to unpair .... Press to confirm. firm. The product is no longer ger paired with the remote e control ol ... A message appears when pairing has completed The name of the remote control is shown co Name Using your BeoRemote One The BeoRemote One display shows you sources and functions. Display text in focus If the display text is longer than one line, the nger th text will scroll in from om the rig right in order to display all text when the text is in fo focus. The MyButtons yButtons are short hort cuts to the personalisation ersonalisation function** AF The TV button shows a list of TV sources. The MUSIC button shows a list of music sources* Number button buttons The LIST button shows a list of functions related to the active source Buttons for functions such suc as Programme Information, and for menu operation Guide uide and IInformatio of the e selected source so Control buttons for menu operation and d for operation of non-Bang & Olufsen products roducts through the Peripheral Unitt Controller Centre button for selection Playback ck buttons and replay Button for channel and station step Button for volume adjustment. To mute, press in the middle of the button, press again to bring back the sound Standby button *Depending on your remote control, the NETFLIX source may be either a physical button or a source found when pressing TV. NETFLIX may not be available on all markets. **Depending on your remote control, you may have either three or four MyButtons. BeoRemote One in detail Note that you may be able to show or hide display texts for the TV, MUSIC and LIST buttons, and also rename texts. For more information see page 10 and page 11. Daily and advanced operation with BeoRemote One buttons The buttons on BeoRemote One are conveniently grouped for daily operation. TV … displays available TV sources in the BeoRemote One display for you to switch on. Use or to step in the list and press the centre button to switch on a source. MUSIC … displays available music sources in the BeoRemote One display for you to switch on. Use or to step in the list and press the centre button to switch on a source. MyButtons , , , … a long press stores the current setup, such as source, sound and picture settings. A short press selects it. You can also set up the MyButtons to select a specific source only, see page 9. AF ec *If you have selected LIGHT or CONTROL in the LIST menu, nu, you m must press LIST again to our light and co access your control functions. brin up the Programme Guide on GUIDE … brings yo Ba your Bang & Olufsen television. Number buttons … 0–9 are used whenever you have to enter numbers, for example to select a specific TV channel or radio station. LIST … displays extra functions and products in the BeoRemote One display. Use or to step in the list and press the centre button to select an item.* If you exitt LIST rt time, you and press LIST again within short may need to press LIST one more time to ti nu. display the top of the menu. … allows you to back up through menus oRemote One lists. Long press and the BeoRemote exits menus enus and the BeoRemote One lists. li INFO … brings up programme information our Bang & Olufsen television. for your … brings up the on-screen menus for your Bang & Olufsen television. Continued … >> BeoRemote One in detail AF , , and … arrow buttons left, right, up and down allow you to move in menus and in the BeoRemote One display. Use to return to previous level/item. Use to open a list of options or make a selection. (Centre button) … allows you to select or activate a menu or item. (Coloured buttons) … allow you to select colour specific functions. It will be explained in the guide for your Bang & Olufsen product when and how to use the buttons. … allows you ou to adjust adj the vo volume up and down. To mute, e, press in the middle of the button, press again to bring back the sound. and … search backwards or forwards step by step. The buttons have different functions depending on your Bang & Olufsen television or music system. See the guide for your system for more information. (Play) … start playback of a track, file or recording or start replay. (Pause) … pause playback of a programme or recording. P + /P - … allows you to step through TV channels and radio stations. (Standby) … switch your product to ucts standby. Long press switches all products in your system to standby. Access your favourite content using MyButtons You can personalise your BeoRemote One, using the MyButtons and the TV and MUSIC buttons.* You can save a snapshot of a current viewing and listening experience to be able to restore it quickly with just one touch of a button. For more information, see the guide for your television. Depending on your remote control, you can save up to six snapshots which can be activated by the MyButtons, the TV button and the MUSIC button. Your television must be switched on and a source must be selected. A snapshot includes the settings made for the selected source, for example, stand positions and sound adjustment. To save a snapshot … Press and hold one of the MyButtons, the TV or MUSIC button to save the current viewing or playback experience Buttons and the TV and MUSIC Use the MyButtons access your ffavourite content with buttons to acces ouch of a button. one touch To use a snapshot … ded Press the button dedicated for shot the desired snapshot AF You can also dedicate a source to one of the MyButtons, and use it to switch on the source directly. Save and use a snapshot Note that not all products support the MyButton function. For more information, see the guide for your product. *The TV and MUSIC buttons can be personalised the same way as the MyButtons when you operate a Bluetooth based product and you will still be able to select sources from the lists brought up in the remote control display. napshot is no n longer If the item saved as a snapshot vailable, the snapshot will still be restored, available, follo normal source but th the item played will follow be select source. behaviour for the selected Depending on your television, ion, on, a he menu may appear on the screen for you to select elect specific de in the settings to include snapshot where a If you save a snapshot with a button w snapshot apshot has already lready been saved, the existing snapshott will be replaced by the new snaps snapshot. Use a MyButton for a specific source Yo can select a source You you want to activate each time you press one of the MyButtons. Press to select one of the MyButtons To set up u a MyButton for a specific source ... LIST Pres to bring up Settings in Press tthe BeoRemote One display Press to step in the list of sources** ... Settings Press to bring up Advanced Advanced Press to store the source you want to activate with the MyButton Press to bring up Buttons Buttons **Select MyButton in top of the list if you want to use the button to save a snapshot, instead. This function is not available when you use BeoRemote One for operation of a ‘Beo4’ product. Customise your remote control Show/hide sources or functions For Bluetooth products, settings for sources and functions are typically received from the paired product. For IR products, you can show or hide sources to be listed when pressing the TV button and MUSIC button. You can also show or hide functions for the LIST button related to TV and MUSIC sources. Note that, if all sources are hidden, no sources are available when pressing the TV or MUSIC button. TV HOMEMEDIA You can add one or more items to be sho shown in the BeoRemote One lists. AF The BeoRemote One distinguishes between two main types of sources for the product you operate. The TV button allows you to access TV sources and the MUSIC button allows you to access music sources. If your products are connected in a BeoLink setup, you can also access linked sources (marked with a link symbol ), if available. For more information about linked sources, see pages 24–29. The sources available depend on your product and your setup. The LIST button relates to the source you have selected. To show/hide sources or functions ns for the TV, MUSIC or LIST buttons ... LIST Press to bring up Settings in splay the BeoRemote One display Settings You can press the LIST button to bring up extra functions in the display to help you operate the active source, just as if you were bringing up extra buttons. If you have paired your BeoRemote One to a Bluetooth product, settings for sources and functions are typically received from the paired product for you to enjoy the he advantage of making settings only ly one place. Consequently, the settings ngs are not made in the remote control.l. For or more information, see the guide ide for the paired product. If settings are not received from the paired product uct or if you operate an IR product, you can customise a BeoRemote You te One to suit your product. Yo can show/hide ow/hide and rename sources or functions ns for the th TV, MUSIC and the LIST IST buttons related ated to each main source and change the order der in which sources and extra ext functions appear when you bring them up. up Press to select ect the list you sources want to edit, TV sources, MUSIC USIC sources, LIST for TV or LIST for MUSIC Press to select Show ... Show Press ess to select the source or function to show or hide ... Press to switch between betwe or hide (no selection) show sh Continu with Continue w the next source to show or hide. or function funct unct Or ..... … press to back up through previous menus, or press and hold to exit the menu completely 10 ... >> Customise your remote control Rename sources or functions For Bluetooth products, settings for sources and functions are typically received from the paired product. For IR products, you can rename the sources to be shown when pressing the TV button and MUSIC button. You can also rename functions for the LIST button dedicated to each source, LIST for MUSIC and LIST for TV. … press to step in the predefined list of names Press to select a character, number or symbol**** or a name from the predefined list***** AirP Express AirPort AppleTV name a p instead *If you want to rename product instead, T to bring up Settings. Settin . Select Settings Selec press LIST d and bring up Products. Produc Follow Products Advanced nstructions to rename your pro instructions product. **Whe you rename a source sourc in **When Be BeoRemote One, it may be a good idea to rename the source in the television or music system as well, if possible. ***You can only use latin characters for nam so naming sources or functions. If a character contai special symbols, you can press contain contains ME MENU while the character is highlighted to access a list of special characters to select. ****Use the icons at the end of the spelling line to switch between upper case/lower , to access numbers , symbols case , delete and store . *****You can also enter numbers using the BeoRemote One number buttons 0 to 9. AF To rename a source or function* for the TV, MUSIC and LIST buttons ... Press to bring up Settings in LIST the BeoRemote One display Press to step between characters*** and the icons at the end of the spelling line****. Or, … Settings Press to access the list of sources or functions to rename; TV sources, MUSIC sources, LIST for TV or LIST for MUSIC ... Press to delete**** the last character, number or symbol ve e all or press and hold to remove text Press to find the store icon to store the name Press to bring up Rename Rename ... Press to select the source or function* to rename**, such as WEBMEDIA 11 >> Customise your remote control Move sources or functions Press to move the list behind the selected item Press to place the item in the list Continue with the next source or function to move. Or ... 35 35 ... To move a source or function* for the TV, MUSIC and LIST buttons ... LIST Press to bring up Settings in the BeoRemote One display … press to back up through previous menus, or press and hold to exit the menu completely Settings Press to access the list of sources or functions to move, TV sources, MUSIC sources, LIST for TV or LIST for MUSIC ... Press to bring up Move Move ove Press to select the source* or function to move, such as WEBMEDIA ... 12 TV HOMEMEDIA HOME hind the selected item , and Move the list behind use the centre button on to plac place the item in the list. AF For Bluetooth products, settings for sources and functions are typically received from the paired product. For IR products, you can change the order in which the listed sources appear when pressing the TV button and MUSIC button for the product you operate. You can also move functions for the LIST button dedicated to each source, LIST for MUSIC and LIST for TV. Note, however, that you cannot move the Settings menu, which is always placed at the bottom of the list. * If you want to move a prod product instead, press LIST to bring up Setting LIST Settings. Select Advanced and bring up Produc Products. Follow instructions to move your produ product. Note, however, that the active produc product is always placed in top of the LIST LIST. Make settings for the display BeoRemote One display settings You can change the settings for display time out and for display brightness on your BeoRemote One.* Set the display brightness … Press to bring up Settings in the BeoRemote One display LIST Settings Change the display time out … Press to bring up Settings in the BeoRemote One display 10 seconds LIST Press to bring up Display Settings Press to bring up Display 5 seconds Display 15 seconds Press to bring up Brightness Brightness ness From the factory, y, the display disp time out is 10 seconds. AF Display Press to select Time out Time out Press to step between the settings for display time out Press to step between the ness ess settings for display brightness ... etting Press to store the setting ... Low Press to store the setting Medium *Note that the longer the display is lit and the brighter the display, the more often the batteries need to be changed. High From the factory, the display brightness is Medium. 13 Maintenance Changing the batteries of BeoRemote One When the battery warning appears in the BeoRemote One display, it is time to change the batteries in the remote control. The BeoRemote One requires two batteries. We recommend that you use 1.5 volt (size AAA) batteries only. Replace the batteries as shown in the Quick guide enclosed with your BeoRemote One. AF When the battery warning appears in the lated display you cannot use the display related functions until you have changed the batteries. Cleaning BeoRemote One Note! Never use alcohol or o other solvents to clean n any part of the remote remot control! Wipe the BeoRemote One remote control ol with a soft, lint-free, wet cloth which is wrung firmly. 14 Add more products From the factory, BeoRemote One is set up for use with a television (such as BeoVision) only. In order for BeoRemote One to operate a new IR based product, you must first add the product to the BeoRemote One LIST for you to select it. For Bluetooth products, see page 4. Then you must set up the individual IR products to a specific Option in the Product Option menu for the products to recognise your BeoRemote One, see page 16. BeoVision Active product Mute Stand When you have added a product to th the LIST, you always find the active product in the top when you press LIST. LIST To add or remove a product found via the LIST button ... Press to bring up Settings in the BeoRemote One display Settings Set * For information about how to use and operate a ‘Beo4’ product w opera with BeoRemote One, see pages 18–20. Be pa Press to bring up p Advanced Advanced vanced Blueto products must be ** Note that Bluetooth paired to be vvisible in the list. AF If you want to use BeoRemote One with a new type of Bang & Olufsen product or if you want to use the same BeoRemote One to operate more than one product, the product must be shown in the BeoRemote One LIST for you to select it. Step 1 – Add or remove a product in the LIST The products you operate with BeoRemote One are divided into three types: – Televisions (default BeoVision): 8 different product Options – Music systems (default BeoSound): 8 different product Options – ‘Beo4’ products* (default Beo4 VIDEO, Beo4 AUDIO etc.): 4 different product Options LIST Products Pro Press ess to select Products** Produ Products* Show The Option settings allow your BeoRemote One to operate your IR xample, you products individually. If, for example, me room and have two televisions in the same commands from your BeoRemote One can u must set up each be received by both,, you of the televisionss as an individual product, and set them to the correct Options if they ed. You do not set an Option for fo a are IR based. oth product as it automatically sends send Bluetooth responding information to your the corresponding ntrol, which wh it is paired with. remote control, The settings you make for your acti BeoRemote One are saved for the active w to switch to product. To find out how 7. another product, see page 17. Press ss to select Show Press to select the product tto show or hide, such as BeoVision(2) ... Pres to switch between show Press or hide (no ( selection) Con Continue with the next product to show or hide. Or ... … press to back up through previous menus, or press and hold to exit the menu completely Note! If a Network Link product is intended for operation with Beo4, you must set it up as a ‘Beo4’ product instead. For more information, see pages 18–20. 15 ... Note tth that you can rename an IR product or change the order in which it appears when cha ha you bring it up via the LIST button. This is done in the same way as sources or functions are renamed or moved for the TV, MUSIC and LIST buttons, see page 11 and page 12. >> Add more products Step 2 – Set up your IR product to the correct Option To give your product a specific Option using BeoRemote One … Point your remote control at the IR-receiver of the product you want to Option programme. The distance between the remote control and the IR-receiver must be maximum 0.5 metres. Press to bring up Settings in the BeoRemote One display LIST * Select IR responsive when you want your product to react to commands from your BeoRemote One and IR blind when you do not want your product to react to remote control commands. ** In order to o show th the product Option, such ound, ound d, in the BeoRemote Beo as BeoSound, One display when n you press pre LIST, T you m must add it to the eoRemote One On LIST, T see pag BeoRemote page 15. Settings AF If you use BeoRemote One for a new IR product or for two or more IR products of the same type, for example, two televisions and commands from BeoRemote One can be received by both products, the individual products must be able to recognise your BeoRemote One. Therefore, you must set up your product to one of the different product Options using the Product Option menu. You do not set an Option for a Bluetooth product as it automatically sends the corresponding information to your remote control, which it is paired with. Press to bring up Advanced Depending on your setup, you can select whether or not you want the product to react to commands from your BeoRemote One. Advanced Adv Press to bring up Product oduct Option For information about which Option to use, see the guide for your television or music system. Note! If a Network Link product is intended for operation with Beo4, you must set it up as a ‘Beo4’ product instead. For more information, see pages 18–20. Option on Select lect if you want ant the product to be IR responsive ive or IR blind* blind ... Select ct the active product, such su as BeoVision BeoVi ... Select a product Opt Option** for your such as yo product, suc BeoSound BeoS Product oduct Select and press the ect Send centre cent button to store the selected Option 16 ... Send >> Add more products Switch between products using BeoRemote One Normally, you can activate a source, such as TV, by pressing TV or MUSIC and finding the relevant source on your remote control. However, when you have more products, you must select the product before you can operate its sources. You switch between the products via LIST. LIST ... on BeoVision TV LIST BeoVision(2) BeoVision TV LIST BeoVision Beo Beo4 AUDIO MU MUSIC AF To switch between products … Press to bring up the current product, such as BeoVision, in the BeoRemote One LIST LIST Beo4 AUDIO LIST BeoVision BeoVision(2) TV Select the desired product*, for example, BeoVision(2) for a Network Link television, or Beo4 AUDIO for a ‘Beo4’ music system Press and select a source, such as HomeMedia ... ntrol operation eration when Example of remote control you switch from one e television with th Network Link to another. TV ... *To bring up your IR based product, such as BeoVision(2) in the BeoRemote One display, you must first add it to the BeoRemote mote One On LIST, see page 15. 17 Example of remote cont Ex control operation when you switch between a television with Network Link and a music system with Master Link. Using BeoRemote One for a ‘Beo4’ product Step 1 – Add or remove a ‘Beo4’ product in the LIST When you want to use BeoRemote One to operate a ‘Beo4’ product, you must first add the product to the BeoRemote One LIST. Then you must set up the product to the correct Option, see page 19. Note that you can also rename a product or change the order in which it appears when you bring it up via the LIST button. This is done in the same way as sources or functions are renamed or moved forr the TV, TV MUSIC and LIST buttons, see page ge 11 and an page 12. Beo4 VIDEO Beo4 AV Beo4 AUDIO e four ‘Beo4’ ‘Be Select one of the products, O Beo4 AV, AV V, Beo4 AUDIO, AUDIO or Beo4 VIDEO, Beo4 LINK: Beo VIDEO is used for a ‘Beo4’ ‘Beo television – Beo4 in Option 1 or 5. ‘ – Beo4 AV is used for a ‘Beo4’ television in Option 2 or 6. – Beo4 AUDIO is used for a ‘Beo4’ music system in Option 1, 2, 5 or 6. – Be Beo4 LINK LIN is used for the second ‘Beo4’ –Beo4 pro prod product, when two televisions or music systems are placed in the same room. AF You can use BeoRemote One for operation of a Master Link television or music system, which is normally operated with Beo4. The product must be shown in the BeoRemote One LIST to select it. When a ‘Beo4’ product is selected, the BeoRemote One LIST contains the same functions as you find in the Beo4 LIST. However, you cannot select sources via LIST. To find out how to use BeoRemote One if you normally use Beo4, see page 21. In order to operate your ‘Beo4’ product with BeoRemote One, you must set it to the correct Option, see page 19. When you use BeoRemote One to operate a ‘Beo4’ product, the MyButtons are dedicated to the buttons corresponding to the DTV, DVD, A.MEM and CD buttons on Beo4. You can change this at any time and dedicate the MyButtons to activate anotherr source directly, see page 20. However, when you use BeoRemote One for u cannot use operation of a ‘Beo4’ product, you the MyButtons and the TV and MUSIC buttons to save a snapshott of a current viewing or playback experience. perience. ivate vate a specific source when You can also activate you press the TV and MUSIC C button, when te One is used for operation of a BeoRemote ‘Beo4’ product, produc see page 20. ation about how to switch from a For information ‘Beo4’ productt to another type of product, product see page 17. To add or remove a ‘Beo4’ o4’ product oduct found via the LIST button ... LIST Press to bring up p Settings in the BeoRemote ote One d display Settings Press to bring up p Advanced Advanced Presss to select Products ts Products Press to bring up Show Show Press Pres to select the ‘Beo4’ product to show or hide. Options tions are: Beo4 AUDIO, Beo4 Beo VIDEO, Beo4 AV or Beo4 LINK ... Press to switch between show or hide (no selection) Continue with the next product to show or hide. Or ... … press to back up through previous menus, or press and hold to exit the menu completely 18 ... Note! If a Network Link product is intended for operation with Beo4, you must set it up as a ‘Beo4’ product instead. >> Using BeoRemote One for a ‘Beo4’ product Step 2 – Set up your ‘Beo4’ product to the correct Option To Option programme a ‘Beo4’ product using BeoRemote One … Point your remote control at the IR-receiver of the product you want to Option programme. The distance between the remote control and the IR-receiver must be maximum 0.5 metres. A.OPT. L.OPT. Select one of the three ‘Beo4’ Options, V.OPT., A.OPT. or L.OPT.. LIST ... AF Press to bring up the current product, such as BeoVision, in the BeoRemote One LIST V.OPT. Options … – Option 0: The product is connected to another product in the same room and is operated through the other product. – Option 1: The product is connected to roduct in i the same room and you another product perate th prod can operate the product directly or ough th the other produ through product. Option 2: The main product may or may – Option connected to a product iin another not be connecte room and is operate operated directly with ne. BeoRemote One. hen two television – Option 4: Used when televisions or aced in the t same music systems are placed room and one is either a Net Network Link pro product or a Master Link product set to Option 1 or 2. This ens ensures that the other television or music system behaves as a link product. Th television (or music system) – Option 5: The conne is connected to the main Master Link prod product in another room and to a Master Link music system (or television) in the same room and both television and music system in the room can be operated directly. – Option 6: The product is connected to the main product in another room and can be operated directly. When you use BeoRemote One for a ‘Beo4’ product, the Product Option menu is adapted to match the Option settings available with your Beo4 remote control. Select the product that you want to Option programme, such as Beo4 LINK ... Press to bring up Settings LIST Settings Press to bring up Advanced Advanced Adv Press to bring up Product oduct Option Product ct Option Op Select the appropriate Option: he appro V.OPT., A.OPT. OPT. or L.OPT. Enter the appropriate e number (0, 1, 2, 4, 5 or 6) .... 0–6 19 >> Using BeoRemote One for a ‘Beo4’ product Set up the MyButtons and the TV or MUSIC button for a specific source When you use BeoRemote One to operate a ‘Beo4’ product, the MyButtons are dedicated to the buttons corresponding to the DTV, DVD, A.MEM and CD buttons on Beo4. You can change this at any time and select which source you want to activate each time you press one of the MyButtons. To set up the MyButtons and the TV or MUSIC button for activating a specific source ... LIST Press to bring up Settings in the BeoRemote One display You can also dedicate a source to the TV or MUSIC button and use each button to activate a TV or MUSIC source directly. Press to bring up Advanced Settings Set up p the MyButtons My and the TV and MUSIC uttons to activate acti a source di buttons directly. Advanced AF *When you have selec selected the TV V or MUSIC button, you can choose None if you do not want the TV V or MUSIC IC C button butto to activate activa a specific source. Note that you cannot use the MyButtons and the TV and MUSIC buttons to save a snapshot of a current television viewing or playback experience when you use BeoRemote One for operation of a ‘Beo4’ product. Press to bring up Buttons Buttons Butto Select between the MyButtons, yButtons, the TV or MUSIC button tton ... Press to step p in the list of sources* es* ... Press to store the e source you want to activate with the selected button 20 Beo4 and BeoRemote One conversion If you are used to operate your product with Beo4, below conversion helps you find out which button to use on BeoRemote One when you operate a ‘Beo4’ product. BeoRemote One buttons are marked with blue. The buttons which have exactly the same function on Beo4 and BeoRemote One are light grey. TV AF HOMEMEDIA TV: … use the TV button on BeoRemote One. This also displays a list of TV sources. V.MEM: … press TV to bring up TV sources and find V.MEM in the BeoRemote One display. A.MEM: … press MUSIC to bring up music sources and find A.MEM in the BeoRemote One display. emote O One. LIST: … press LIST on BeoRemote me functions as The LIST contains the same nnot selectt sources Beo4. Note that you cannot V and MUSIC buttons ttons via LIST, use the TV instead. d. TV LIGHT RADIO DTV DVD CD V.MEM TEXT A.MEM LIST MENU pres LIST T and fin find LIGHT T in the LIGHT HT:: … press LIGHT: BeoRemote mote One LIST. RADIO: … use the MUSIC C button on ne. This a also displays a lis BeoRemote One. list of music sources. DTV, DVD, A.ME A.MEM, and d CD: CD: … use the Buttons* on BeoRemote BeoRemo BeoRemot One. DTV: MyButtons* DVD:: , A.MEM: DVD A.MEM M: an and CD: TEXT:: … press LIST TEXT and find TEXT in the BeoRemote One LIST. MENU: … press MEN MENU Beo BeoRemote One. (Home) on Navigation button: … use the arrow buttons , , and on BeoRemote One. Search backwards or forwards: … use on BeoRemote One. and ((Pause) e) on STOP … press (Pause STOP: BeoRemote e One. STOP PLAY and : … use P + /P - on BeoRemote One. PLAY: … use (Play) on BeoRemote One. BACK ((Back) Back on BACK: … press BeoRemote BeoRemo One. Note! The INFO and GUIDE buttons have no function when you operate a ‘Beo4’ product with BeoRemote One. *You can change this at any time and dedicate the MyButtons to activate another source directly, see page 20. 21 BeoRemote One advanced settings You can change the display language of your BeoRemote One at any time. Once a language is chosen, all menus and display messages are shown in this language. To set the language of BeoRemote One ... Press to bring up Settings in LIST the BeoRemote One display Settings Note that to rename sources or functions, you can only use latin characters. Press to bring up Advance Advanced If by accident, you have chosen a language you do not want, you can enter the language menu by pressing LIST, then press the arrow re button up one step and press the centre button. Press the arrow button up one step ce more more. followed by the centre button twice Advanced Press to bring up Language Langua Press to step between lan languages AF If you use your BeoRemote One for operation of lights, curtains or blinds, you can make settings for this in the LIGHT and CONTROL menus when operating an IR product, whereas similar settings are made in the product itself when operating a Bluetooth product. This may require a supported Home Automation System. Contact your Bang & Olufsen retailer for more information. Set the language of your BeoRemote One You have access to make more advanced settings of your BeoRemote One from the Advanced menu. You can, for example, change the display language and you can reset your BeoRemote One to factory settings. You can also set the IR strength if you use BeoRemote One to operate more than one ‘Beo4’ product. Language ... the language Press to select th use y want to u you Reset your BeoRemote BeoRemo One You u can reset your BeoRemot BeoRemote One to factory settings. To reset your BeoRemote BeoRem One ... Press to bring up Settings in the BeoRemot BeoRemote One display LIST Settings All settings will be lost. Please BNMÿQLNQ cancel. Press to bring up Advanced Advanced To confirm the reset press the centre button to cancel. or press Press to bring up Factory reset Factor y reset You will be asked to confirm the reset. Press to confirm the reset or, … … press and hold to exit the menu without resetting 22 Note! When you reset, all settings you have made for your BeoRemote One, including pairings, will be deleted. >> BeoRemote One advanced settings Set the IR strength of BeoRemote One You can set up the IR strength of your BeoRemote One when operating IR products. If, for example, you use BeoRemote One for several ‘Beo4’ products and they are placed in close proximity, you can reduce the IR strength of the remote control. To set the IR strength of BeoRemote One ... LIST Press to bring up Settings in the BeoRemote One display Settings Press to bring up Advanced Advanced Press to bring up IR strength AF IR strength ngth Press to step between the settings for IR strength Press to store the setting etting 23 ... BeoLink setup A TV with Network Link and a music system with Master Link in the same or separate rooms Default product: Product Option: Product name/BeoVision Beo4 AUDIO Access linked sources from Beo4 AUDIO BLC Access ccess sources so from TV AF When you use BeoRemote One for operation of more products and the products are connected to the same network, you can access sound from sources of the other products in the network. The products can be placed in the same or separate rooms. For more information about how to connect and set up your product, see the guide for your television or music system. CD HomeMedia A.MEM A. TV Radio HDMI 1 HOMEMEDIA TV CD A.MEM RADIO V.MEM In this setup, the Network Link TV is either an IR based TV named BeoVision per default or a Bluetooth TV with a TV pr product name an and syste must be set up the Master Link music system as Beo4 eo4 A AUDIO AUDIO.. If yourr Maste Master Link product Be VIDEO Beo is a TV, it must be set up as Beo4 instead. For information about abo how to set up g 15 1 and page 18. your product, see page 24 You have a list of TV and MUSIC sources for each product type: BeoVision or TV product name and Beo4 AUDIO or Beo4 VIDEO. Continued … >> BeoLink setup To show/hide sources in the IR based TV using BeoRemote One ...* > The television is set up as BeoVision from the factory and BeoVision is selected in the BeoRemote One LIST. > Show or hide sources** of the television via the BeoRemote One LIST, see page 10. linked sources, such as > Show or hide CD via the BeoRemote One LIST, see page 10. Example of how to listen to a TV source from the television ...***** LIST Press to bring up the current product, such as BeoVision or ... the TV product name, in the BeoRemote One LIST Select the desired product, for example, Beo4 AUDIO*** Beo4 AUDIO Press TV and select the source you want to ‘borrow’ from the television, such as HOMEMEDIA**** TV AF To show/hide sources in Beo4 AUDIO ... > Select Beo4 AUDIO*** in the BeoRemote One LIST. > Show or hide sources of the music system via the BeoRemote One LIST, see page 10. > Show sources you can ‘borrow’ from the television, such as HOMEMEDIA**** via the BeoRemote One LIST or hide sources, you do not need, see page 10. * You cannot show or hide sources in a Bluetooth product using BeoRemote One. Sources are shown in the remote control display as set in the product. ** Note that available TV sources are shown in the source list menu of your television. *** In this example, p Beo4 AUDIO is already e BeoR BeoRe added to the BeoRemote One LIST and the music system ystem is set s up as a Beo4 AUDIO. rele **** Iff the relevant source, such as HOMEMEDIA, OMEMEDIA,, is OMEMEDIA i not available iin the L T, contact you LIST BeoRemote One LIST, your retailer. ***** With Network Lin Link you can access acce ces of other ot products in the sound from sources network. If you connect nect your television televisio to a u must aalso use a Master Link product, you BeoLink (BLC) to obtain eoLink Converter NL/ML (BLC the benefits of Network Link. be Lin 25 HOMEMEDIA OMEME >> BeoLink setup Two Bluetooth TVs with Network Link (with one BeoRemote One) Access Default product: Product Option: Product name Product name In this setup, both Network Link TVs are given a product name. For information about Bluetooth pairing, see page 4. You have a list off TV and MUSIC sources for each television. on.. In the on tth example, only the TV shown. sources are show linked sources from TV linked sources AF Access You sources using ou cannot show sho or hide sourc BeoRemote One. Sources are sho shown in the product. remote control display as set in the pr from TV HomeMedia HOMEMEDIA TV TV HDMI 1 HDMI 1 Example of how to listen to a linked TV source ...* LIST Press to bring up the current product in the ... BeoRemote One LIST * With Network Link, you can access sound from sources of other products in the network. Select the desired product name ... ect a Press TV and select linked source, rce, such as HDMI 1 TV HDMI DMI 1 26 >> BeoLink setup A Bluetooth TV and an IR based TV with Network Link (with one BeoRemote One) Default product: Product Option: Product name BeoVision Access In this setup, one Network Link TV is given a product name and the other is BeoVision per default. For information about Bluetooth pairing, see page 4. For information about how to set up your o IR based product, see page 15. linked sources from BeoVision You have list of TV and MUSIC sources for ave a lis ach television. television In the example, example only the TV each sources are shown. shown Access linked sources o applies if you replace tthe This scenario also Network Link television the example sion in th exampl with a Network Link music systems. stems. Note No that the music system is set up as BeoSound. BeoS AF from Bluetooth TV HomeMedia HOMEMEDIA TV TV HDMI 1 HDMI 1 To show/hide sources of the IR based TV using BeoRemote One ...* > Select BeoVision ** in the BeoRemote One LIST. th > Show or hide sources*** of both te One LIST, televisions via the BeoRemote see page 10. linked ked sources, s, such as > Show or hide HDMI 1 of both televisions via the ne LIST LIST,, see page p g 10. 110. BeoRemote One Example of how to listen to a linked TV sourc ...**** source LIST curren Press to bring up the current duct, such Vision or product, as BeoVision ... duct name, in the a product BeoRemote oRem One LIST Select the desired produ product, for example, BeoVision or a product name** Press TV and a select a linke linked inke source, such as HDMI 27 ... TV HDMI 1 * You cannot show or hide sources in a Bluetooth product using BeoRemote One. Sources are shown in the remote control display as set in the product. ** In this example, BeoVision is already added to the BeoRemote One LIST and the TV is set up as BeoVision. *** Note that available TV sources are shown in the source list menu of your television. **** With Network Link, you can access sound from sources of other products in the network. Note! If a Network Link product is intended for operation with Beo4, you must set it up as a ‘Beo4’ product instead. For more information, see pages 18–20. >> BeoLink setup Two IR based Network Link TVs in separate rooms Default product: Default product: BeoVision BeoVision Access In this setup, both Network Link TVs are BeoVision per default. If your setup consists of a Network Link TV and a Network Link music system, instead, the music system l BeoSound. would be default linked sources sam list o You have the same of TV and MUSIC ces for b both televisions sources televisions. In the example, nly the TV sources sou shown only are shown. linked sources AF Access HOMEMEDIA HOMEMEDIA TV TV HDMI 1 HDMI 1 To show/hide sources of both TVs using BeoRemote One ... > Both televisions are set up as BeoVision elected from the factory and BeoVision is selected in the BeoRemote One LIST. oth televisions tele > Show or hide sources* of both page p g 10 via the BeoRemote One LIST, see pag 10.. linked ked sources, s, such as > Show or hide HDMI 1 of both televisions via the ne LIST LIST,, see page p g 10. BeoRemote One Example of how to listen to a linked TV sourc ...** source TV linked lin Press TV and select a HDMI DMI 1 rce, such su as source, HDMI 1 * Note that available TV sources are shown in the source list menu of your television. ** With Network Link, you can access sound from sources of other products in the network. Note! If a Network Link product is intended for operation with Beo4, you must set it up as a ‘Beo4’ product instead. For more information, see pages 18–20. 28 >> BeoLink setup Two IR based Network Link TVs in the same room (with one BeoRemote One) Default product: Product Option: BeoVision BeoVision(2) Access In this setup, one Network Link TV is BeoVision per default and the other is set up as BeoVision(2). For information about how to set up your product, see page 15. linked sources from You have the e same llist of TV and MUSIC produc BeoVision and sources for both products BeoVision(2). Vision(2). Vision(2) BeoVision(2) rep This scenario also applies if you replace one of the televisions in the th example with a usic systems. syste Network Link music Note that the music system is set up as BeoSound. Be BeoSound linked sources AF Access from BeoVision RADIO HOMEMEDIA TV NET RADIO SPOTIFY HDMI 1 To show/hide sources of both TVs using BeoRemote One ... > Select BeoVision or BeoVision(2), or the respective product names,* in the BeoRemote One LIST. > Show or hide sources** off both emote te One LIST, L , LIST televisions via the BeoRemote see page 10. linked sources, such as > Show or hide HDMI 1 of both oth televisions via v the e One LIST, LIS , see LIST e page g 10. 10. BeoRemote Example of how to listen to a linked TV sourc ...*** source LIST curren Press to bring up the current duct, such Vision or product, as BeoVision ... duct name, in the a product oRem BeoRemote One LIST Select the desired produ product, for BeoVision(2 or a example, BeoVision(2) product name* a select a Press TV and linke linked inke source, such as HDMI * In this example, BeoVision(2) is already added to the BeoRemote One LIST and the TV is set up as BeoVision(2). ** Note that available TV sources are shown in the source list menu of your television. *** With Network Link, you can access sound from sources of other products in the network. ... TV Note! If a Network Link product is intended for operation with Beo4, you must set it up as a ‘Beo4’ product instead. For more information, see pages 18–20. HDMI 1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Kent Create Date : 2015:12:28 23:35:08-08:00 Modify Date : 2015:12:28 23:35:08-08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:12:28 23:34:27-08:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:a5327de6-0285-4981-a271-a9b03db2d9bb Original Document ID : xmp.did:501781CFC675E211ABCCB79563A567BE Document ID : xmp.id:d7c2aff6-dfbb-2b4d-9e8b-e3dc0ac2263e Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:a3d366e1-1092-224d-9eb8-edaa5e601176 Derived From Document ID : xmp.did:34c0dae4-dafc-7e4d-98f3-810ee10b3947 Derived From Original Document ID: xmp.did:501781CFC675E211ABCCB79563A567BE Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2015:12:22 08:44:22+01:00 Format : application/pdf Title : T30_online_guide_221215_BUE.PDF Creator : Kent Producer : Acrobat Distiller 10.0.0 (Windows) Trapped : False Page Count : 29EXIF Metadata provided by EXIF.tools