Banner Engineering RM1809 FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER User Manual SureCross DX80 Wireless I O Network Product Manual
Banner Engineering Corporation FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER SureCross DX80 Wireless I O Network Product Manual
Contents
- 1. USERS GUIDE
- 2. AGENCY CERTIFICATIONS
- 3. USERS MANUAL
AGENCY CERTIFICATIONS
DX80 Wireless Network Agency Certifications Instruction Manual FCC Certification - 900 MHz, 1 Watt Radio FCC Certification The DX80 Module complies with Part 15 of the FCC rules and regulations. FCC ID: UE3RM1809 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Notices IMPORTANT: The DX80 Modules have been certified by the FCC for use with other products without any further certification (as per FCC section 2.1091). Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. IMPORTANT: The DX80 Modules have been certified for fixed base station and mobile applications. If modules will be used for portable applications, the device must undergo SAR testing. IMPORTANT: If integrated into another product, the FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door, or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains FCC ID: UE3RM1809. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna, • Increase the separation between the equipment and receiving module, • Connect the equipment into an outlet on a circuit different from that to which the receiving module is connected, and/or • Consult the dealer or an experienced radio/TV technician for help. Antenna Warning WARNING: This device has been tested with Reverse Polarity SMA connectors with the antennas listed in Table 1 Appendix A. When integrated into OEM products, fixed antennas require installation preventing end-users from replacing them with nonapproved antennas. Antennas not listed in the tables must be tested to comply with FCC Section 15.203 (unique antenna connectors) and Section 15.247 (emissions). FCC-Approved Antennas WARNING: This equipment is approved only for mobile and base station transmitting devices. Antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. DX80 Module may be used only with Approved Antennas that have been tested with this module. Part Number Antenna Type Maximum Gain Maximum Power Setting — Integral antenna Unity gain +30 dBm BWA-9O1-x Omni, 1/4 wave dipole ≤2 dBi +30 dBm BWA-9O2-C Omni, 1/2 wave dipole, Swivel ≤2 dBi +30 dBm BWA-9O6-A Omni Wideband, Fiberglass Radome ≤8.2 dBi +27.8 dBm BWA-9O5-B Omni Base Whip ≤7.2 dBi +28.8 dBm BWA-9Y10-A Yagi ≤10 dBi +26 dBm Table 1. Type certified Antenna 36 P/N ###### Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1.1-111 Instance ID : uuid:ca514d06-ed76-4f46-a1f9-d27e320c0d48 Document ID : adobe:docid:indd:a310a303-72a4-11dc-9051-a27376210e1f Rendition Class : proof:pdf Derived From Instance ID : 8b6781fe-66ce-11dc-8dc7-a111bb2b6c7c Derived From Document ID : adobe:docid:indd:e4c91bc6-e9e7-11db-a4f0-904dd468fabd Create Date : 2007:10:04 13:33:01-05:00 Modify Date : 2007:10:04 13:33:01-05:00 Metadata Date : 2007:10:04 13:33:01-05:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10636 bytes, use -b option to extract) Format : application/pdf Title : SureCross DX80 Wireless I/O Network Product Manual Creator : Banner Engineering Corp. Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 1 Author : Banner Engineering Corp.EXIF Metadata provided by EXIF.tools