Baojia Battery Technology BTX500 Bluetooth Headset User Manual 1

Shenzhen Baojia Battery Technology Co., Ltd. Bluetooth Headset 1

USERS MANUAL

0751283496//2345678 9 10 11 12[CN]1                   M3Bluetooth  HeadsetBluetono Ith -.LineMicro USB charging cable3.5mm stereo cable pouchAccessoriesSpecificationSKU: BTX500                      Talk Time: 15 hoursStandby Time: 25 daysCharging Time: 2-3 hoursWireless Range: 10m(33ft)Bluetooth: V4.0Weight: 265gSize: 200(L)x175(W)x45(T)mm②Next Song⑤Multi-Function ButtonBluetooth PairingAnswer/End CallPlay/Pause Music① Volume Up ④Previous Song⑥LED Indicator③Volume Down  Charging  Turn OnSet the On/Off Switch to On, blue LED indicator lights up for 2 seconds, with boot prompt. If the                        M3 was connected with your devices before,the last one can be reconnected when                      M3 is in standby.     Turn Off Set the On/Off Switch to Off, blue LED indicator lights up for 3 seconds, with turn-off prompt. Pairing(It will automatically power off if there is no connection for 5 minutes.)Answer CallUnder pairing mode, tap Multi-Function button to answer an incoming call, a prompt tone can be heard.  End CallWhile on a call, tap Multi-Function button to end the call, prompt tone can be heard. Under pairing mode, double tap Multi-Function button to reject an incoming call, prompt tone can be heard. Reject Call In pairing mode, double tap Multi-Function button to redial the last number you called.In pairing mode, simultaneously tap the Previous Song and Multi-Function button to initiate a voice dial.(only available for Bluetooth enabled cellphones) Voice Dial Redial  Play/Pause Previous/  Next SongWhile listening to music, tap Multi-Function button to play/pause the music.  Volume Up/Volume DownSwitch Cellphone &                 M3 During a call, press & hold Multi-Function button for 2 seconds to switch the  call from                     M3 to cellphone or from cellphone to                     M3, a “beep” tone will be heard. EQ Switch While playing music, press & hold Multi-Function button to switch between different EQ types, a prompt tone will be heard.  Bluetooth Status Indicator Connected          Disconnected                  LED blinks once every 7 seconds Battery lowLED blinks twice every 7 secondsLED blinks twice every 2 secondsPairing mode LEDs blink Talking Music play LEDs blink gradually LED blinks twice every 3 secondsCharging LED remains onCharging complete LED is offBattery Status Indicator:1. There will be “Battery Low” voice prompt when the battery voltage is between 3.0V and 3.3V, LED blinks white quickly. 2. When the battery voltage is lower than 3.0V, it will automatically power off.  FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-  Reorient or relocate the receiving antenna.-  Increase the separation between the equipment and receiver.-  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-  Consult the dealer or an experienced radio / TV technician for help.This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and(2) This device must accept any interference received, including interference that may cause undesired operation.CautionThe manufacture is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.Limited WarrantyThank you for your purchase of MIPOW's product. MIPOW warrants that the product isat the time of its original purchase free of defects in workmanship and material. Thislimited warranty for the product shall last for twelve(12) months from the date of originalpurchase. This original warranty card and original invoice must be presented at the timeyou require warranty service or such warranty will be voided. This limited warranty is valid only if the product is used for the purpose for which it was designed. It does not apply to damage or loss caused by negligence; physical abuse; misuse; accident; exposure to moisture; dampness or extreme thermal; unauthorized modifications; unauthorized opening or repair; forces of nature; or other actions beyond the reasonable control of MIPOW. In case of with the warranty does not apply, a repair or replacement charge will be incurred. The customer shall be responsible for sending the defective product to and collecting the repaired or replaced product from the service centre.NB: MIPOW reserves the right to interpret the terms and conditions contained herein;and the right for any changes without prior notice.Stereo Bluetooth Headphone                   M3Warranty CardMP3PhoneTablet PC and Notebookon off DCWired Connections USB Input Port3.5mm Jack ConnectorOn/Off SwitchRetractable 3.5mm jackstereo cableWhile in standby mode, pull out the 3.5mm jack stereo cable to connect with your device. While in wired connection, the operation varies in iOS system and Android system. Use the included Micro USB charging cable to connect the                     M3 to any USB powered computer or wall charger. When the                     M3 is in low battery,  “Battery Low” voice prompt can be heard and the white LED indicator flashes quickly. Fully charging                    M3 takes 2-3 hours.     Under standby mode, press & hold the Next Song button and tap the Multi-Function button, the LED indicator will flash green and white alternately, then open your device’s Bluetooth settings, add or search for devices when “                     M3” appears, select it andpair your device. While listening to music, tap  button to play previous song, " < ”prompt tone will be heard; tap  button to play next song,  “ > ”prompt tone will be heard.During a call or music play, tap “+” button to volume up and “-” button to volume down.(the highest and lowest volume will be prompted)   V1.0
//上一曲/下一曲任何未經負責合規性檢查方明確批准的變更或修改行為都將取消使用者操作該設備的權利。聯邦通信委員會合規性聲明依照聯邦通信委員會條款第15部分规定,該設備經測試證實符合B類數碼設備標準。該限制條款對該設備應用於家用裝置中可能造成的危害性干擾提供了合理的保護措施。該設備會生成、使用並放射出射頻能量,如果不按照說明手冊上的方法進行安裝和使用,則可能對無線通訊造成危害性的干擾。但不保證在特殊情況下沒有干擾。若該設備對收音機、電視之收訊造成有害干擾(可開/關設備之電源確認),建議使用者以下列一種或多種方式改善干擾狀況:1.重新調整或安置接收天線。2.增加該設備與接收裝置間的距離。3.將該設備連接與該接收裝置不同回路的電源插座。4.諮詢經銷商或向資深廣播電視技術人員尋求説明。該設備符合聯邦通信委員會條款第15條規定。其操作需依照以下兩個條件:(1) 該設備不得產生有害干擾。(2) 該設備必須接收任何其他干擾包括產生非預期操作之干擾。警告該生產廠家將不對任何因未經許可而對該設備進行修改所產生的收音機、電視干擾負責。該修改行為可能導致該使用者操作本設備的權利被取消。FCC 聲明0751283496①加音量④上一曲③減音量⑤藍牙配對,    接聽掛斷電話按鈕,    暫停/播放⑥LED指示燈②下一曲Bluetono Ith -.Line產品規格 產品配件Micro USB 充電線3.5mm音頻線絨布袋產品型號:       BTX500                          通話時間:       15小時待機時間:       25天充電時間:       2-3小時無線傳輸距離:10米(33英尺)藍牙:                 藍牙4.0重量:                 265克尺寸:                 200(L)x175(W)                         x45(T)mm充電當電壓低電時,藍牙會語音提示”BATTERY LOW”,且白燈快閃,那麼需要重新充電,在2-3小時完成充電。將USB充電線的一端插入電腦或牆充USB輸出端接口,另一端插入藍牙耳機Micro USB充電端口。 開啟藍牙撥 動 開 關 撥 至 ON位 置 開 機 ,藍燈常亮2秒,開機提示音,如 藍 牙 連 接 過 手 機 , 開 機 會自動重連最後一次連接的手機。 關閉藍牙 撥動ON/OFF開關至OFF位置,藍燈常亮3秒,有關機提示音。(友情提示:當耳機處於無連接狀態5分鐘後會自動關機) 接聽電話 掛斷電話已連接手機情況下,有外部來電時,短按多功能鍵,接聽來電,有提示音。當通話結束,短按多功能鍵 ,掛斷電話, 有提示音。拒接來電已連接手機情況下,有外部來電時,雙擊多功能鍵 ,拒絕來電, 有提示音。在待機狀態下,雙擊多功能鍵會撥出最後撥出過的一組號碼。連接藍牙手機,待機條件下,同時短按多功能鍵和上一曲鍵就可以語音撥號。(需手機藍牙支持)末號重撥藍牙配對暫停/播放音量調節在音樂播放狀態下,短按多功能鍵實現暫停播放切換。在通話狀態下長按多功能鍵2秒,將聽到嘟一聲,這時聲音就從耳機轉到手機上同樣的操作可以將聲音從手機轉回到耳機上。從耳機到手機的聲音轉換 在音樂播放狀態下,長按多功能鍵,EQ相互切換,同時有提示音。EQ切換藍牙指示燈狀態連接待機狀態        燈每7秒閃2次未連接待機狀態        燈每2秒閃2次配對狀態            燈閃爍音樂播放狀態            燈呼吸亮暗通話狀態        燈每7秒閃1次低電狀態        燈每2秒閃3次充電過程        燈常亮充電完成        燈滅 電池狀態指示:1.電 池電壓小於3.3v大於3.0v時低壓報警,   白燈快閃並有語音提示。2.電 池電壓小於3.0v時自動關機。藍牙立體身耳機                    M3保養證有限保養多謝選購MIPOW產品。MIPOW保證:本產品於購買時並無任何材質或製品上的瑕疵。本產品的有限保養自購買起十二(12)個月內。當需要保養服務時,顧客必須出示保養證正本和發票正本,否則保養將被作廢。保養服務只限於產品在正常使用下有效。此有限保養不適用於因人為疏忽、粗魯的操作、不正確的使用、意外事故、暴露於濕氣之下、潮濕或過度高溫、未經授權的修正、未經授權的開啟或修復、不可抗力;或其他MIPOW無法合理控制的行為所造成的損壞或損失。如損壞未能合乎本保養條例,顧客將被收取維修或更換零件的費用。顧客必須自行將有瑕疵的產品交到客戶服務中心,並自行取回已修復或更換的本產品。注:MIPOW擁有任何對本人所述的條件和條件之最終裁決權,及有權隨時對條款和條件作出更改,而無需另行通知。語音撥號2345678 9 10 11 12藍牙立體聲耳機1MP3PhoneTablet PC and NotebookUSB充電口3.5mm耳機插頭耳機開關鍵on off DC有線耳機連接耳機在關機狀態下,从机身拔出3.5mm 音頻線,线头連接到設備。機身自帶3.5mm音頻線當 使 用 有 線 耳 機 連 接 時 , 會 根 據 手 機IOS系統和安卓系統的不同,會有不同的操作!開機狀態下,首先按多功能鍵不放,然後短按下一曲按鍵,即進入配對狀態,此時看到白燈綠燈交替閃亮,表明藍牙在匹配搜尋狀態,打開手機藍牙功能,搜索到"                       M3",與之配對即可。音樂狀態或通話中短按音量鍵“+”可調大音量,短按音量鍵“-”可調小音量。( 調節音量到兩極端會有提示音)在音樂播放狀態下,短按功能鍵“  ”,即 上一曲,有提示音。在音樂播放狀態下,短按功能鍵“  ”,即  下一曲,有提示音。[CN]                   M3

Navigation menu