Baojia Battery Technology BTX500 Bluetooth Headset User Manual 1
Shenzhen Baojia Battery Technology Co., Ltd. Bluetooth Headset 1
USERS MANUAL
0
7
5
1
2
8
3
4
9
6
//
2345678 9 10 11 12
[CN]
1
M3
Bluetooth Headset
B
l
u
e
t
o
n
o
I
t
h
-
.
L
i
n
e
Micro USB
charging cable
3.5mm stereo cable
pouch
Accessories
Specification
SKU: BTX500
Talk Time: 15 hours
Standby Time: 25 days
Charging Time: 2-3 hours
Wireless Range: 10m(33ft)
Bluetooth: V4.0
Weight: 265g
Size: 200(L)x175(W)x45(T)mm
②Next Song
⑤Multi-Function Button
Bluetooth Pairing
Answer/End Call
Play/Pause Music
① Volume Up
④Previous Song
⑥LED Indicator
③Volume Down
Charging
Turn On
Set the On/Off Switch to On, blue LED
indicator lights up for 2 seconds, with
boot prompt. If the M3 was
connected with your devices before,
the last one can be reconnected when
M3 is in standby.
Turn Off
Set the On/Off Switch to Off,
blue LED indicator lights up for
3 seconds, with turn-off prompt.
Pairing
(It will automatically power off if
there is no connection for 5 minutes.)
Answer Call
Under pairing mode, tap
Multi-Function button to
answer an incoming call,
a prompt tone can be
heard.
End Call
While on a call, tap
Multi-Function button to
end the call, prompt tone
can be heard.
Under pairing mode,
double tap
Multi-Function button to
reject an incoming call,
prompt tone can be
heard.
Reject Call
In pairing mode, double
tap Multi-Function button to
redial the last number you
called.
In pairing mode, simultaneously
tap the Previous Song and
Multi-Function button to initiate
a voice dial.(only available for
Bluetooth enabled cellphones)
Voice Dial
Redial
Play/Pause
Previous/
Next Song
While listening to music, tap
Multi-Function button to
play/pause the music.
Volume Up/
Volume Down
Switch Cellphone & M3
During a call, press & hold Multi-Function button for 2 seconds to switch the
call from M3 to cellphone or from cellphone to M3, a
“beep” tone will be heard.
EQ Switch
While playing music, press & hold Multi-Function button to switch between different
EQ types, a prompt tone will be heard.
Bluetooth Status Indicator
Connected
Disconnected
LED blinks once every 7 seconds
Battery low
LED blinks twice every 7 seconds
LED blinks twice every 2 seconds
Pairing mode LEDs blink
Talking
Music play LEDs blink gradually
LED blinks twice every 3 seconds
Charging LED remains on
Charging complete LED is off
Battery Status Indicator:
1. There will be “Battery Low” voice
prompt when the battery voltage is
between 3.0V and 3.3V, LED blinks
white quickly.
2. When the battery voltage is lower than 3.0V,
it will automatically power off.
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution
The manufacture is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user
authority to operate the equipment.
Limited Warranty
Thank you for your purchase of MIPOW's product. MIPOW warrants that the product is
at the time of its original purchase free of defects in workmanship and material. This
limited warranty for the product shall last for twelve(12) months from the date of original
purchase. This original warranty card and original invoice must be presented at the time
you require warranty service or such warranty will be voided. This limited warranty is valid
only if the product is used for the purpose for which it was designed. It does not apply to
damage or loss caused by negligence; physical abuse; misuse; accident; exposure to
moisture; dampness or extreme thermal; unauthorized modifications; unauthorized
opening or repair; forces of nature; or other actions beyond the reasonable control of
MIPOW. In case of with the warranty does not apply, a repair or replacement charge will
be incurred. The customer shall be responsible for sending the defective product to and
collecting the repaired or replaced product from the service centre.
NB: MIPOW reserves the right to interpret the terms and conditions contained herein;
and the right for any changes without prior notice.
Stereo Bluetooth Headphone M3
Warranty Card
MP3
PhoneTablet
PC and Notebook
on off DC
Wired Connections
USB Input Port
3.5mm Jack
Connector
On/Off Switch
Retractable
3.5mm jack
stereo cable
While in standby mode, pull out the 3.5mm
jack stereo cable to connect with your
device.
While in wired connection, the operation varies in
iOS system and Android system.
Use the included Micro USB
charging cable to connect
the M3 to any USB
powered computer or wall
charger.
When the M3
is in low battery, “Battery
Low” voice prompt can be
heard and the white LED
indicator flashes quickly.
Fully charging M3
takes 2-3 hours.
Under standby mode, press & hold the Next Song
button and tap the Multi-Function button, the LED
indicator will flash green and white alternately, then
open your device’s Bluetooth settings, add or search
for devices when “ M3” appears, select it
andpair your device.
While listening to music,
tap button to play previous song, " < ”
prompt tone will be heard;
tap button to play next song, “ > ”
prompt tone will be heard.
During a call or music play,
tap “+” button to volume up
and “-” button to volume down.
(the highest and lowest volume
will be prompted)
V1.0
//
上一曲/下一曲
任何未經負責合規性檢查方明確批准的變更或修改行為都將取消使用者操作該設
備的權利。
聯邦通信委員會合規性聲明
依照聯邦通信委員會條款第15部分规定，該設備經測試證實符合B類數碼設備標
準。該限制條款對該設備應用於家用裝置中可能造成的危害性干擾提供了合理的
保護措施。該設備會生成、使用並放射出射頻能量，如果不按照說明手冊上的方
法進行安裝和使用，則可能對無線通訊造成危害性的干擾。但不保證在特殊情況
下沒有干擾。若該設備對收音機、電視之收訊造成有害干擾（可開/關設備之電
源確認），建議使用者以下列一種或多種方式改善干擾狀況：
1.重新調整或安置接收天線。
2.增加該設備與接收裝置間的距離。
3.將該設備連接與該接收裝置不同回路的電源插座。
4.諮詢經銷商或向資深廣播電視技術人員尋求説明。
該設備符合聯邦通信委員會條款第15條規定。其操作需依照以下兩個條件：
(1) 該設備不得產生有害干擾。
(2) 該設備必須接收任何其他干擾包括產生非預期操作之干擾。
警告
該生產廠家將不對任何因未經許可而對該設備進行修改所產生的收音機、電視
干擾負責。該修改行為可能導致該使用者操作本設備的權利被取消。
FCC 聲明
0
7
5
1
2
8
3
4
9
6
①加音量
④上一曲
③減音量
⑤藍牙配對，
接聽掛斷電話按鈕，
暫停/播放
⑥LED指示燈
②下一曲
B
l
u
e
t
o
n
o
I
t
h
-
.
L
i
n
e
產品規格 產品配件
Micro USB 充電線
3.5mm音頻線
絨布袋
產品型號： BTX500
通話時間： 15小時
待機時間： 25天
充電時間： 2-3小時
無線傳輸距離：10米(33英尺)
藍牙: 藍牙4.0
重量: 265克
尺寸: 200(L)x175(W)
x45(T)mm
充電
當電壓低電時,
藍牙會語音提示
”BATTERY LOW”,
且白燈快閃,那麼需要重
新充電，在2-3小時完
成充電。
將USB充電線的一端插
入電腦或牆充USB輸出
端接口，另一端插入藍
牙耳機Micro USB充電
端口。
開啟藍牙
撥 動 開 關 撥 至 ON位 置 開 機 ，
藍燈常亮2秒，開機提示音，
如 藍 牙 連 接 過 手 機 ， 開 機 會
自動重連最後一次連接的手機。
關閉藍牙
撥動ON/OFF開關至OFF位置，
藍燈常亮3秒，有關機提示音。
(友情提示：當耳機處於無連接狀態5分鐘後會自動關機)
接聽電話
掛斷電話
已連接手機情況下，
有外部來電時，
短按多功能鍵，
接聽來電，有提示音。
當通話結束，短按多功能
鍵 ，掛斷電話, 有提示音。
拒接來電
已連接手機情況下，
有外部來電時，
雙擊多功能鍵 ，
拒絕來電, 有提示音。
在待機狀態下，
雙擊多功能鍵會撥出
最後撥出過的一組號碼。
連接藍牙手機，
待機條件下，
同時短按多功能鍵
和上一曲鍵就可以
語音撥號。
（需手機藍牙支持）
末號重撥
藍牙配對
暫停/播放
音量調節
在音樂播放狀態下,
短按多功能鍵實現
暫停播放切換。
在通話狀態下長按多功能鍵2秒，將聽到嘟一聲，這時聲音就從耳
機轉到手機上同樣的操作可以將聲音從手機轉回到耳機上。
從耳機到手機的聲音轉換
在音樂播放狀態下，長按多功能鍵，EQ相互切換，同時有提示音。
EQ切換
藍牙指示燈狀態
連接待機狀態 燈每7秒閃2次
未連接待機狀態 燈每2秒閃2次
配對狀態 燈閃爍
音樂播放狀態 燈呼吸亮暗
通話狀態 燈每7秒閃1次
低電狀態 燈每2秒閃3次
充電過程 燈常亮
充電完成 燈滅
電池狀態指示：
1.電 池電壓小於3.3v大於3.0v時低壓報警,
白燈快閃並有語音提示。
2.電 池電壓小於3.0v時自動關機。
藍牙立體身耳機 M3
保養證
有限保養
多謝選購MIPOW產品。MIPOW保證：本產品於購買時並無任何材質或製品上的瑕疵。
本產品的有限保養自購買起十二（12）個月內。當需要保養服務時，顧客必須出示保
養證正本和發票正本，否則保養將被作廢。
保養服務只限於產品在正常使用下有效。此有限保養不適用於因人為疏忽、粗魯的操
作、不正確的使用、意外事故、暴露於濕氣之下、潮濕或過度高溫、未經授權的修正、
未經授權的開啟或修復、不可抗力；或其他MIPOW無法合理控制的行為所造成的損壞
或損失。如損壞未能合乎本保養條例，顧客將被收取維修或更換零件的費用。顧客必
須自行將有瑕疵的產品交到客戶服務中心，並自行取回已修復或更換的本產品。
注：MIPOW擁有任何對本人所述的條件和條件之最終裁決權，及有權隨時對條款和條
件作出更改，而無需另行通知。
語音撥號
2345678 9 10 11 12
藍牙立體聲耳機
1
MP3
PhoneTablet
PC and Notebook
USB充電口
3.5mm耳機插頭
耳機開關鍵
on off DC
有線耳機連接
耳機在關機狀態下,从机身拔出3.5mm
音頻線,线头連接到設備。
機身自帶3.5mm
音頻線
當 使 用 有 線 耳 機 連 接 時 ， 會 根 據 手 機IOS
系統和安卓系統的不同，會有不同的操作！
開機狀態下，首先按多功能鍵不
放，然後短按下一曲按鍵，即進
入配對狀態，此時看到白燈綠燈
交替閃亮，表明藍牙在匹配搜尋
狀態，打開手機藍牙功能，搜索
到" M3",與之配對
即可。
音樂狀態或通話
中短按音量鍵“+”
可調大音量，短按
音量鍵“-”可調小
音量。( 調節音量到
兩極端會有提示音)
在音樂播放狀態下,
短按功能鍵“ ”,即
上一曲,有提示音。
在音樂播放狀態下,
短按功能鍵“ ”,即
下一曲,有提示音。
[CN]
M3