| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 729122 |
| Application ID | SNPapE1OJfWnYQ4p86zjCQ== |
| Document Description | Part 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 32.46kB (405799 bits) |
| Date Submitted | 2006-11-16 00:00:00 |
| Date Available | 2006-11-16 00:00:00 |
| Creation Date | 2006-11-16 13:57:07 |
| Producing Software | Adobe Acrobat 6.0 Paper Capture |
| Document Lastmod | 2006-11-16 13:57:19 |
| Document Title | Part 2 |
| Document Creator | Network ScanGear Ver.2.01 |
BARRETT 2050 HF SSB TRANSCEIVER
Recelvlng a “Pagecall" “SMS”
When a Pagecall is received an audible alarm is sounded, the mute (squelch) is
opened and me display shows the following:-
EaM Recs-ivy!
Pagecall Received
1234
-—-Pagecall lnfnrmeliul‘l‘
(RLL 115 R5 SEEN as
POSSIBLE
The audible alarm will sound for lhirty seconds and men time am. To cancel the
alarm belore the time oul pedad and to acknowledge lhe call. pless P'I'I' or any
key.
When the audlble alarm fimes oulme call received “Envelope" icon is displayed in
the bonom righl hand side 0! lhe display,
For delalls al weviously received Pagecalls enter “Call Hlstory" by holding the
key down lor two seconds or male.
=—== 51 e! 237
BARRETT 20 HF SSB TRANSCEIVER
Remote station operational status - “Stateall”
“Slatcalr auows the operatienal status parameters of any Barrett tmnsceiver fitted
with selmll to be accessed. This status is sent lrom the remete transceiver as a
selcall with the status information embedded within the selcall structure Information
retrieved for remote diagnosis of transceiver performance includes:-
Selcall ID
Saltware version
Option level fitted and transceiver model
Receive slate battery voltage
Last transrn't state battery voltage
Signal strength Indication oi received status request selcall.
Forward power output level
VSWR cl antenna
Requesting another stations status
select the channel you want to send the Status request can on.
(“Beacon call” can be used to select the best channel)
listen for traffic on that channel. it no trame is heard then continue,
Then press the key
select “Status Request” with the scroll keys
Send Cali——
StatusReQuest
then press the @ key
Status Request——_..
ID: SEEK
Ftddre.s Bwk Emrtu
Press (an tn canhnue
enter the identification or the station you want to request the
operational status from (see “Entering station lD’s and using
the address and telephone books“)
mammhsée
52 ol 237
Ekanner Dela Hz!!!)
402." 100003“,
Slalus Newest
fl m434
The slams request is being lransmified
Channel. “0“! IN“!
fit” 100mm",
" 7 u ngtnra
“f 7 Response
Your station is walling for (he stan’on you called to send back its
“Status data" (whlch sounds Iike ihe remote stallion sending a
Sslcau to you filter which me «allowing will be displayed, use Ihe
a h keys in move through me pages:-
-—--< Status: swag-3 I >—
Barrett 2050
Se" can Version 1130
last Called m (23455
ress Clear to Em!
Du “doll 13.3
TBVa!
—« Shaman Page 3 >
aner |ESW
VS‘fi‘R; 1.0 40
Enlenna: Base Station
N! Temp. 44':
or _ the following error messages:-
(hannal: Ni"! 12:00
h, 1 00009 kill
0/ No Response
There was no response from lhe stallon you requested lhe status
from. repeal we process or change me channel and repeat the
process
53 0! 237
ARRET 0 HF SSB TRANSCEIVER
Person to personts) secure call
This facility allows a secure voice oonnecfion to be made between two or more
statlons.
Note'.- In the protemed menu “Audio Setting" section, scrambler must be enabled in
the "Scambler secflun" and in the "Scrambler eode“ section a 4 digit number
enwred, For security purposes thIs code must be the same as the code set in the
station you wish to call.
select the channel you want to 59! up me secure link on. ("Beacon
call" can be used to select the best channel)
Ilslen for traffic on that channei, it no traffic [5 heard then continue.
press the key
select “Secure Selcall" wilh the scroll keys
Send Cali
Secure Call
Seizure (an
in; me
Rddress Mk Emnl‘i
Pi es; (all to Eontinu?
enter the station ID of the station you wish to call (see "Entering
station ID's and using the address and telephone books")
Note.- to make a secure call to multlple stations use a group call
ID encompas ‘ng the required smfinns,
press the key
Walt for he seleclive call to be sent.
listen ior revertive tone from the called station that indicates the
call was successful.
ll no revenive tone Is heard or it was dlflicult to hear try another
channel and repeat the process until a good channel is found.
Revertive tones will not be heard it using a group all code to call
multi'pIe stations.
540f 237 as
50 HF SSE TRANSCEiVER
Tuning the receiver
The 2050 transceiver can be used as a tunable receiver. The rece'wer can be
tuned from 500 KHz to 30 MHz. in steps mnging from 1 Hz up to 10 MHz.
Pressthe key (0 enierihe tuning receiver mode:-
(hannei; mu rerun
A.
n“ 3100000“;
' » neceivar Tune
‘ mungmiiknz
To tune the receiver move the cursor over (he digll represenfing
the frequency increment required in the receiver frequency
display you wish
to tune using eilher the
We
[be
press the [E] key to relum lo the previous operaung channel.
keys, Ihen use.
to tune up in irequency
to tune down in frequency
g 55 of 237
ARRETT 50 HF SSB TRANS EIVER
Scanning with the tunable receiver
The receiver can scan any range 01 irequencies from 500 KHz to 30 MHz with a
frequency step down to 10 Hz.
Setting up scan frequencies
To set up the frequency scan parameters. enter the tuning receiver mode, then:-
Press the
displayed:—
key for two seconds until the lollowing is
——Lmtet Limll—
mm kHz
Tgpe lower frequent?
zl Enter a new frequency, using the numeric keys, to sei the lower
' scan limit boundary - example heiclw shows ihe lower limit set in
12 Msz»
Lower Hall
120lJlll—— kHz
nge lowev ivequencu
then press the '3 key
Enwr a new irequellcy, using the numeric keys. to set the upper
scan Iimil boundary - example below shows the upper limit setm
14 MHZ:-
Upper Linii
14Bflll.!—— kHz
Type higher frequencu
then press the C key
56 of 237
0 HP 558 TRANSCEIVER
Using the Scroll keys select step Increment required In Hz (Steps
available 100Hz (0.1kHz). 25on (ozsmmooouz (1kHz),
2500Hz (2.5kHz) (example shown ZSOOHZ)
then press the@ key
Scrnll step Rate
Using the Scroll keys select step speed in milliseconds. (steps
avallable 100mst 250ms, scams, 1000ms (example shown
250ms)
then press the 's l._
BARRETT 50 HF SSB TRANSCENER
Identification
and
T cvrT‘JPe. 2050
S 13345673
up nS' l,2,3.4,5,6,7,’5
We [195720 Retu. n
Software Versl n- 100
DSP Version: 1 All)
(we kiem'nn— 1.00
Pr (tear to Return
—( [daritificalt'nr- Page 3 5—
selxalllini; nit
Seltalllflz 322?
iix niqi (23-156
Presstlesrton mm
Hakleru an. 13.9
Battery 7x. 133
P1! Temyeratw‘e: 27“
Press Clear ls “alum
keys to scroll back and forth through
Displays he transceiver model number, transceiver serial number, options fined.
software version, DSP version. core version, the transoeiver‘s selcall ID's, the
battery voltage in receive, the battery wattage during the last transmit cycle and the
PA (empemture.
59 01237
0 HF SSB TRANSCEIVER
Display Options
Batkllghk Level
—s anthem——
——fi.5Pla-_J DPUOnS—
fiatkligntLavel C
High
Allows lhe backlighl level on the LcD display to be adjusted in one of three viewing
levels-High, Medium 01 Low.
Dispifig Options
Use me Scroll keys lo select lhe level requlred (example
Medium):-
_...Ba-:l:llghl Level—
Medium
when me level required Is displayed press lhe a key
——Ba(klighf Level——
Medium
Selected
6007237 g
BARRETT 205
NSCE WER
Backligm Timeout
w—Siandayd new“-
Dismal; Options
—-—~Di5nlal_4 Uptmn;
A i\
Baz‘xhgm Timeuut iv,
Shurl Timeout
AIIOWS me backlighl dmeout fime in be set so (he hackliqm stays on for a short |Ime
(ram me last key press, fur a long lime irom the Iasi key press or so that (he
backligm is permanently on or on.
Nohb Having the backlight off reduces me iransoeiver's power consumption.
Use |he scroll keys to select me required semng (example
“Always on"):-
—-—Batklahk Timeuu‘r
“Mags [in
(m 7
When (he sehing requ'n'ed is displayed press me key
——-fiaikiighi Timeout——
alwaus Uri
Seieclefl
g 61 of 237
ARRETT 0 HF SSB TRANSCEIVER
62 01 237
Call History
Whenever a Selcall, Telcall. All cell, Group caIL Sub group call, Pagewll. Smwall
GPS or Emergency call is received or transmilted Ils details are held in a first In
in: out call history bufler.
Received calls max have not been viewed before are held in a section called “New
Calls”. received calls (hal have been vlewed are held for future viewing in the
“Inbox” all transmilted calls are stored in the “Outbox'. Each history bull/er can store
up to 30 eniries.
New Call
This sedion Iisls all types 0! selcalls that have been received but not yet viewed:-
-—-§tandaid I‘finu— ———Eal| historg
A A
Cailllisiorg “3“ Cal" v
V‘ 3 Received
New Ealls
m; 1,234 nemmfllc
mpe Seltall
Receivcd' la (a) m Jan
Enter for more delailt
Inbox
This secfion llsis all types oi Selcalls ma! have been received and viewed and
stored (or future reierencez-
“Standard Menu
Call Histm'g
v 27 Recorded
_1nh°x_.___
ll): 1234 lletnrdzm$
TUPE. Selcall
Receivea lam lsl Jan
Enter for mare detail:
BA ETT 0 HP 588 TRANSCElVER
Outbax
This secfion lists all types ol Selcalls lhat have been lransmifled;
——-5iandard Menu—— can Mister-J—
Al
lo -
(Rubin V
z4 Recorded
tall
—numc-x
m: 1234 necommc
vae, Sekall
Tramsmmed: mm m Jan
mm for more distails
Navigauon when in me “New calls". "Inbox" and “Ombox' is always lhe same as
shown in the “New Calls“ example below:-
n—‘E-landavdfienm— —_-—[allllislor¢_A-—'
A A
Call Historu Maw Calls v
V 3 theived
Elther Use the Scroll keys lo selecl lhe required record:-
_Nw (alls
In; 1224 Hazard
Type eliall
mun-ed: 12 an 151m-
Enter lav more details
-—--—--New Calls
m; 1mm Record:@3
T‘JPE' PZQQKall
Received 46 23th flpr
Enter for more da il|i
Or enter a record number using the numeric keys and press
lhe vkey
G3 ol 237
BARRETT 2 0 HF SSB TRANSCEIVER
64 of 237
__..__Huw hug”-
|n (334 necnrd 2I
F‘JPE. Selcafl
Received. 1200 |Sl Jan
Enta my more details
_.__ , Cans——
"3.0001 hearthmz’;
Tgpe. Pagers”
Received- 1310 28th aw
Euler my more details
In all cases, when a record has been selected, press the : key fol mole
delalls of the call:-
UH—
Nsme [40591 BfiSE
Channel- UDUZ
Frequency: 20000 kn:
If the received'selcall ID is ncfi listed in (he transceiver Selcall ID book, associating
It with a name, the following will be dlsplayed:-
mix-x“—
uame Linkmwn
Ehamnal. 0002
frequentu 2000.0 Hi:
If the channel the incoming salt-all was recelved on has been deleted since the
selcall was received the following is displayed:-
Inbnx
Name [405m BRSE
Channel 0002
Frequenc's: nknown
Address books
Selcall ID Book — add a new entry
——-5landard Nenu— .._——Rddress Books—
FA
"V
I] d dr e s 5 Banks Selcali ID ifinmk
V an Enlrie;
——-Selcan ID Baak
mm Entry
then press he 'a key
—-——Selcal\ In Back——
Name I
Selcall in:
Inp Nam
In
press E key if Uppercase required
-Selial\ W Book
Name: \I
Seicall II!
Upper use node
Nam rm oak Entry
In
enter name (0 be associated wlm Selcail ID
SeiEaHIU Beak —
flame “SEEM EH
Selcal
Uppercase I‘lode
Input Name or m Bank Entry
thenpress lg key:-
65 of 237
——-—59I-:a|| '.IJ 500k-
Name ntxsta WEE
ielcall II] E
mput Selene m
enter selcall ID number, (our or six digits
———Ss-|ca1| m Book
Nam nostflw Bust
Selc : 4559?
input Selcall In
then press me '= key
——Sel(ail ID boak———
New
mm;
0 HF SSB TRANSC
Selcall ID Book — edit an entry
-—-—-Sland£vrd mum—q.—
address Beaks
‘v’
A .
Search Entries
e—Icsll m Book—
Mamezms
Selcaflll). norm
Pres? Enke. tn edit selcan u!
“J
Use the Scroll keys to select enlry and
small In Book
Name» nusm BREE
Sexcafl m: I ------
Imam Sena" IE!
input new Selcall ID four or six digils
T—— elcaiHG Bonk——
Nam DR! 5955
Selcail II: 5471"
Inpm Seiun m
thenprsssthe '= key
all ID Book——
gf
Entry
Updated
50 HF SSE TRANS
an Eniries
E‘VER
address Buck;————~
Sena“ II) Bank A
press key (0 edit
67 01 237
ARRETT 50 HF SSB TRANSCERVER
Selcall ID Book — erase an entry
address Book:
Selcall ID Rook e
er
211 Entries
__,___.
Seltal ID Book
——Standard New——
HddIT'ESS Books
“I
Search Entries
Selcall In book—-
N “new
Selcsllm: 3547
Presszmertne ts
use the Scroll keys to select the emry you want to erase.
press NE key for more than two seconds
——Erasu Enlrw—
Fire you sure uouwan' to erase
005m BREE
m ¢
use the Sore“ keys select “Yes“
-——-Era;é Entry——
Hrs gnu me you want {a erase
DUbBI BnSE
Yes:
pressthe l: key
68 o! 237
RRETT 050 HF SSE TRANSCEIVER
——~Selcafl IB Book——
[n‘tru
{rased
Phone book -add a new entry
-———Slandard "enu— Rddr ess Banks——
A )\
Madras Banks ”Mine Bunk V
V “5 Entries
Name I
Mr
Inntk Name cl Phone 600k Enlrg
r n.
press the 5 key i' uppercase required
Phane flog ——_..
Uppevcase nude
xnpu> Name or Phnne Ear-b Enlw
enter the name «0 be associabd with telephone number
Name MI
Pb:
Input Name orphans: 600k Ean'J
men press the 3 key
69 of 237
ARRETT 0 HF SSB TRANSCEIVER
Phane fio<
inpuf Telephone Number
enter the telephone number using me numeric keys (up m 15
diglts)
mock:
Name am
pm» 0051395555555; ------
Input Talspnane number
then press me '= key
70 01237 a
ARRETT 20 HF SSB TRANSCEIV
Phone back - edit an entry
_.5randar4 iienu—a -—address flunk——
Fnlme Bank V
‘Y’ 05 Entries
address Blanks
-—-the Book—M
Search Eniries
——Phane Baal:—
pressfrltel lo sdlt Tylrlu
Either use the Scroll keys to scroll though the phone book to find
the entry you want to edit
———Phan9 Bot-k
Namevm‘v‘
thm51894341m‘3
Press Enter it: edit Yelnullxber
Or enter the first lener or the name you are looking for using the
Alpha keys. lor example. Iuoking lurllle name Patrick:-
Key in 'p' using alpha keys. then use me Scroll keys lo find
the name:-
lsr to
F‘rsss Telnumer
men press the l: key
71 of 237
ARRETT 20 SSE TRANSCEIVER
now 10 ediuhe telephone number press the C key
9mm) Telephans Number
enter the new tebphone number using the numeric keys (up to 1G
digits):-
~ Phone Stok—
uzme Paarkk
vh: aflstsoflssmfil ------
Inpu ‘el hone
then press the :; key
Entrg J
Updated E
- FhoneBz-vk
Name» ‘. fl:
Ph: D06139555‘3876
Press Enter tn ed’ Telnumb
Phone back - eraslng an entry
—-Standard mnu— ———address books—w
A A
address Banks Phone Hunk V
V 05 Entries
72 D' 237 m
BARRETT
Mime. ‘alllt C
M was. $9976
Search Entries
P -n-3 Bock——
Press Enter to sdll Telnumfier
50 HF 558 T ANSCEIVER
Phone fiank—-—_
select the emvy you want la erase using me Scroll Keys.
press lbs 31] key for more than lwo seconds
Erase Enlr
Patrkk
Ho 3
use lhe Scroll keys select “Yes"
vase nil";
Palrkk
Yssc
then press me 'a key
Eniru
Erased
Flre you SU‘E uau wantm erase
are wu sure emu want to erase
nmne Hack—
73 01237
———— BARRETT 2050 HF 533 T NSCElVER
IR Enable
Enable lR
Press the 'F key to enable the IR facility:-
|lz Enabie...—_
|nfra REG
Enabled
The IR facility will remain enabled ready in link to an IR equipped
PC- or laptop mat is loadeu with the Barrett 2000 senes
programming system for a period of 5 mlnulss. After this time.
unless an IR link has been eslablished. the IR is again disabled.
See the ‘Programmlng section" cl this manual for more details.
74 o! 237 a
0 HF SSB TRANSCEIVER
Audio Scrambler
——-Skandard "em——
audio Stramhler
When using the inlemally filled audio scrambler acceswy PCB that provides
backwards campaflbllity lo the 900 series audio inversion sclamblel (BCA20031) or
me Transcrypl scrambler (BCA20054), the scramble code is set using his cpllun.
All stations using Ihe stumblers require the same swambler code to be entered:-
hm
Scrambler [Lune 'V
(min 1
Ths code can be selected between 1 and 16:-
mess 1he l: key
—-——5crambler [ode——
Code 15
Selected
Nole:- if uslng the lmernally fitted rolllng code audio scrambler accessory
PCB (BCA20054) the code Is set on Ihe unit before lnslallatlon uslng an
exlamal programmer.
a 75 of 237
—— BARRETT 0 HF SSB TRANSCEIVER
76 al 237
2040 Antenna Select (available when 2050
deployed in 2040 manpack adaptor)
“Elan-lard Menu ——204«‘J antenna Selen—
2043 antenna A
2040 nfilBi'll'la Selecl V
‘e’
This section allows (he selection of lhe antenna Iype 10 be used with he 2040
manpackr When an un-(uned antenna such as (he whip or a long-wire Is lo be used
"WhiplLang-wire" ls selected. This enables the aulomafic antenna tunen If 8 50
Ohm broadband antenna or a luned dipole is 10 be used select “50 Ohm'fi The
automaliA: lune! is disabled and the HMO socket on the 2040 is used.
Use an Scroll keys to select the selling required (example “Whip
-—-~-EU-10 Fara bnna
uhipilong Wire
press the : key
2040 Rnlenna-———
uhlpitung
Wire d
Seleclefl
BARRETT 20 0 HF SSE TRANSCElVER
Protected Menu
Refer page 57 lor details on how to access me prolemed menu.
General
Microphone UplDawn Keys
-——-——Drole3rleral
Channel labels C
V' llz (unmet.-
General
——.(hann4.=1|.ab '5——_
Sean h Entries
_.__
Either use lhe scroll keys Io small through to the label you want to
edit:-
-——-Ehannel Lame—“f
Label: _¢
"old Clear to Delete
Press Enter to east Label
Or search for label you want to edit by entering the firs1|eller ol
the label and uslng the scroll keys to select it:»
v—Ellannel Labels——
Halli Elsa: xn Delete
Press Eh ledilLabel
to edit the label press the
F_‘
-—(hanhel Labels
lahel: Pllv atel
' ullle‘A Channel Label
ARRETT
HF SSB
NS EIVER
edit the entry when editlng is complete press me a key
Delete a label
Enler edit made as shown a
press 1h B key until the display be
Use me scroll keys to select “Yes“ you
then press the '=Ke .
——-Ehanm;4 Labels
hove and select the label you
—-(hannel Labels
Entry 5
Updated
sesame
Hold tlear Io llsl
Press Enter to e
Bel
Er ase Emru
fire Wu Sure uvu want to erase
Privsxe
(m use by 0 channels]
Yes:
(nannel Labels——
Entrg
Erased
want 10 delete:-
Iaw appears:-
.A _ _mrg-
Rre you “we lmu want to erase
Privati-
lm um by D mannels]
No:
want to delete the entry:-
81 of 237
0 HF SSB TRANSCEIVER
Add an Entry
-—---Prolwefl—— General-
A Channel Labels C
General
V 02 Entries
-———Lharvn>:‘l Labels
Md Entru
pressthe 3 key
Channel Labels——
label. i
Input New “r am H Lane-I
type in a new label using the Alpha keys:-.
channel Labels
Label. UHHCR Geneva!
|hen press the
New
[mm [_1
82 01237
BAR F 588 TRANSCEIVER
Sewing me Clock
Fm__ -.._- m_
A ‘ A
GEnerai Sattlock v‘
V L
press the @key
._m—
gum
Usecksgn-asemm
Use the Scroll keys and as shown on (he sateen to set the current
|ime fa example 13:15 (1:15 PM):-
Sni Ellr.
m2
Use Ckegs to sel time
Use t 7 k -,-s to move cursa:
When fime is selprsssthe a key.
Set Clock
Time d
Set
l======= 33 of 237
ARRETT 2050 HF SSB TRA SCE‘V
Sening ma one
Drake-fled
knew——
t ,
Jennate v
mum in
pressthe I; key
Set Date——
{L1 Jan 2mm
Usecksgs m set date
Use 0 kegs to move (urzav
‘ ' Use the Scroll keys and as shown on the screen to set the current
date for example 04 June 2004:-
Set Date——
04 Jun @_
Use¢kws to set a ate
at) key“ amuse tuvsor
< ems: >
When date is entered press the key
54 0f237 =======
AR ET 0 HF SSB TRANSCE‘
B4I.T.E4 Test
—Pra.
ededb—
A.
timer-ll
This section runs the lransoeiver‘s Built in Test Equipment (B.I.T.E_) tests. The
nansoeivsr checks vital transceiver Iunclions and reports the resulls as shown
below:-
press the 'a key
BITE Test
Testing ch ,, Passed
Te Volumetonlwl Passed
nfifr‘ssL. . Pass
Tesnng Namnates -
(henpresslhe a keytoconlinuez-
Emera|____
B.I.T.E. TBS! V
Passed
< m. 7
press the key to repeat the last or press me key
to finish.
Nouz- The Audio and Signal strengm mutes must not be selected when running the
BAI.T,E. test or it may lail.
“g 55 01 237
86 of 237
SB TRANSCEIVER
Option installation
General—-
, . A
Bptlon Installatmn V
940 Ominns Enabled
Options are Installed in the Barrett 2050 transceiver by entering a PIN number
supplied by the manulacturer. This PIN number ls related to the electronic serial
number at the transceiver A dliierent PIN number Is provnded dependan on the
option or combination oi optlons required to be fitted. Most options are titted in the
factory beiore dispatch.
pressthe :; key
install UPIim———-—--
Enter fintiun Keg
Enter the option PIN number supplied by the menutacturer using
the numeric keypad by the manutacturer then press the
key
For example if the PIN number supplied Is for all eight options,
after entering the PIN number the lollowing ls displayed:-
—-—-—Tranfzewer Fin-—
Option Pin flccep ted
Option new; unlocked:
123.4551}
Ii an incorrect PIN number is entered the lollowing is displayed:-
—-T. anfii‘ivét‘ Fin-—
Pin Denied
B RRETT 0 HF SSB TRANSCElVE
pring PIN number entry
--—-Prol.:-r,red..-._ General
“Gaping Pin 3
*§¥f¥%fi
Uslng me numeric keypad enter an a dlgll hopping security code.
flowing Pin
Enter flapping Pm
! _______
menprsssme '= key
-—Frequerw lit-Prim; Pin—
Pin
[lemme-i
Note:- Re'er to the “Frequency Hopping" sealion of this manual
Vor details 01 FIN entry and Frequency Hopplng In general
=—====—= 87 (ll 237
BARRETT 2050 HF SSB ANSCEIVER
Secure Call Code
Elena al
in steam——
Eeneral
‘(
SECUYBEGH tilde
was
When uslng the person to person voice scrambler both stations require the same
scrambter code to be entered:-
Securetall Ends
Enter Securecaifl Cutie
“_,_
“ Uslng the numeric key pad enter a tour diglt number:-
u. i-Calr (ode—-
Emer Securecall Code
1234!
then press the 2; key
Securetail cane——
Code 4
Programmed
58 of 237 g
—————— BARRETT 4 HF SSB TRANSCEIVER
Upload Pack
-——-—-Dy elected
[In-fled Pack i,
General
See seaion "Cloning (programmung) from anomer iransoeiver’
g 39 Of 237
BARRETT 2050 HF SSE TRANSCEIVER
Scan tables
Addlng channels to a scan table
Protected Scan sties———-—-
A A
Scan Tamm Scan Table 1 V‘
‘V Emle
———Scan Table |
fluid Enlrg
Use lhe Scroll keys lo select the channel you wish to add:-
Scan Table i
Channel mm Entry: m
fre'luell 100m: kn:
label.Pu
Select thannelw Scan
when the channel required is dispieyed press the 3 key
_——i
-——>can Table 1-—
New
Enlru
90 01 237
BARRETT 2050 HF SSB ANSCElV
Editing channels In 3 Scan table
Elkher
Or
——-Prnte(ied—
5:
fix
an Tables
‘V 02 Entries
table l—
Search Entries
“V
Scan
n Table 1——
ChanneJBtlBB Emrg It
I'l'aquencgv 300m kn:
label, Public
Enlel’ln Edit Sun TableEnlrL-l
..__.—5: in Tables
Scan Table 1 3
Use the Scroll keys lo select the channel you wish to edit:-
Selecl lhe
nTak-le 1
Channel cuss Entrgfific
frewencg: 5mm) tnz
Label. Public
Enter to Edit Scan Tab- Entrg
number (example channel 1 ):
Scan Table
Channelflfitfi Elm-g. l
frequency: 5050.0 m:
label Mall:
Enter to [tilt scan Table Entrg
then presslhe a key
channel you wlsn to edit by enlering the channel
91 of 237
BARR T 2050 H 558 TRANSCEIV
nhble l
(namelmms Entry 01
Freq-mite: 2000.0 kn;
label Puhllc
Enter tn Erfit Scan Table F ntrg
Then press the lg keyw edit the meme! number
Use me Scroll keys to select the new channel for the sun hble
slot:-
-—-—Scan Table l
Channel-Q Enzrgv m
Frequent 300m kHz
label-Mb
Select thanneltu Scan
< an! 9
press the / key to enter the new selfing:-
in Table
Entru
Edited
Erasing onlrles ln a scan table
Select Me scan lable and channel slot you want in remove using
me steps above:-
___/3can Table 1——
cnanwelmns tnzrgms
frequent! 3000.0 kHz
LabeHlubHc
Enter lo Edit Scan Table Entry
when the entry you wish to erase is selected press the [B key
until the following is displayed:-
Erase [mg-—
We use sure I30m want to eras!
enirg M [Channel OMB]?
No:
92 cl! 237
AR ETT
UHF
‘SB TRANSC VER
Use the Scroll keys to select “Yes" when you are sure you want
to erase the entry:-
Eraso Er.tru—-——
Hr? GEE 5m? you want If} eras»?
enlm 01 (Channel 0003]?
Yesc
then presslhe '= key
—-—-Scan Table |_..._
Enlru
Erased
Note:- All channels are displayed In numerical order Within the scan Mlle with
respect to the entry number. there are a maxlmum at 30 enmes in each table.
=~== 93 0! 237
BARRETT 0 HF SSB TRANSCEIVER
changing Scan table labels
-——-Pmle(ted~———
Stan Tsnles
Scan labie1 3
Scan Tables
02 Enlries
-~——-—Scan Tat-I:-
Change Label
pk;
press me '= key
—New C- 1-- Table Label—-
Scan Tattle 15
Use Ihe key (0 clear the old label:-
—New item Table Label—
Uppercase made
using me alpha/numeric keypad enter the new label:-
--—N@w Scan Table Label—
KND Neiwnrkl
lhenpresslhe lg key
94 of 237
ARRETT HF SSB TRANSCEIVER
-—-—--4w:| N-z-hmt k-—
Elm-g
updated :_
gs 95 of 237
ARRETT 20 0 HF SSE TRANSCEIVER
Scan settings
Scan Rate
Pror-z-tled—— ——-——-5can5@thn9$--
Scan Settings
‘1
Scan Rate
awms
\r
_.__5
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : No
Page Count : 50
XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6
About : uuid:725cbb1a-e9d9-486c-9cfc-1ff0831a8470
Producer : Adobe Acrobat 6.0 Paper Capture
Create Date : 2006:11:16 13:57:07-05:00
Creator Tool : Network ScanGear Ver.2.01
Modify Date : 2006:11:16 13:57:19-05:00
Metadata Date : 2006:11:16 13:57:19-05:00
Document ID : uuid:276c080d-b397-4d46-913c-7fb38f0beb2b
Format : application/pdf
Creator : Network ScanGear Ver.2.01
EXIF Metadata provided by EXIF.tools