Barrot Technology I482E Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3191689
Application ID	cp90fP7g1nLg6krfrr6fMQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.65kB (570591 bits)
Date Submitted	2016-11-09 00:00:00
Date Available	2016-11-09 00:00:00
Creation Date	2016-11-07 12:05:13
Producing Software	Adobe Acrobat Pro 10.1.16
Document Lastmod	2016-11-09 09:54:35
Document Title	User Manual
Document Author:	Fiver

1. Software
a)
b)
c)
d)
e)
Install USB<‐> SPI driver: CP210x_VCP_Win2K_XP_S2K3.exe
Install BlueLet on PC BlueLet 7.0.376.0.zip
Install Android iBridge Apk: iBridge_SDK_Demo_check
Use serial port tool to send/receive data via COM port: Commix.exe
Install iPhone iBridge Apk: ios iBridge_App
2. Set up i482e
f)
When installing USB<‐> SPI driver, click next to complete the installation. After the driver is
installed, please restart PC to enable it.
g) Connecting i482e with PC via a USB cable.
h) i482e device name: BlueSoleil E
i) i482e baud rate: 115200
2.1
Check COM port
Check virtual com port number in device manager, See Figure 1 below. In this example, the
created virtual com port is COM6.
i482e i482e‐s User Manual
Figure 1 Virtual COM port
2.2
Open Commix tool
Please set the serial port tool configuration which is highlighted with red rectangle in Figure
2 below.
Figure 2 Commix Configuration
2/9
i482e i482e‐s User Manual
Press open COM port button in Commix, and then press the reset button in i482e
development board. The location of this reset button is illustrated in Figure 3 below.
Figure 3 i482e Development Board’s Init & Reset Button
Figure 4 Bluetooth Initialization Completes
After Commix tool reports the indication which is illustrated in Figure 4 above, i482e could
work afterwards. Reset button is also the Init button. It needs to press this button to initialize
Bluetooth before using i482e development board.
3/9
i482e i482e‐s User Manual
3. SPP Data Transfer
3.1
Testing SPP with PC
If i482e is tested with PC, it needs to install software 1.1, 1.2 and 1.4 which is summarized in
the chapter 1.
a) When installing BlueLet on PC, click next to complete the installation. It needs to re‐start
PC after the installation. At the same time, dongle needs to be plugged in PC during the
installation.
b) Open BlueLet, search Bluetooth devices, and then establish SPP with i482e. During
connecting, a message will be shown to indicate with which COM port is connecting,
and the used COM port could also be inquired by viewing My device property in
BlueLet.
Figure 5 BlueSoleil
Setting
4/9
i482e i482e‐s User Manual
Figure 6 Connecting SPP
c)
Open Commix tool, and set configuration as shown in Figure 7.
Figure 7 Commix configuration
d)
Open COM port, and press Send button to send data. The received data is directly
displayed in Commix.
5/9
i482e i482e‐s User Manual
Figure 8 Send/Receive Data
3.2
Testing SPP with Android
If i482e is tested with Android phones, it needs to install software 1.3.
After successfully setting up i482e, run iBridge to search devices, and then establish SPP
connection in order to send/receive data.
6/9
i482e i482e‐s User Manual
Figure 9 i482e Receives Data
Figure 10 Android Sends data
4. GATT Data Transfer
4.1
Testing GATT with iPhone
If i482e is tested with iPhone, it needs to install software 1.5.
When testing i482e, it must make sure there is no any active connection between i482e and
other remote device.
7/9
i482e i482e‐s User Manual
Run iPhone App, press Search to search devices, and then press Connect to establish GATT
connection. After GATT connection is established, it could send/receive data to/from iPhone. See
Figure 11 below.
Figure 11 i482e sends data
Figure 12 iPhone receives data
Note：
8/9
i482e i482e‐s User Manual
If iPhone App cannot find i482e, or fails to establish the connection with i482e, or fails to
transfer data between i482e and iPhone, please follow the procedures below to check the test
environment.
1. make sure the hardware platform is correct and complete.
2. make sure driver and software are installed correctly.
3. make sure driver and software awork properly.
4. Re‐start mobile phone or reset i482e.
5. If the device BlueSoleil E exists in iPhone’s Bluetooth manager device list, ignore this
device firstly, and then establish GATT connection between i482e and iPhone. This is a
security strategy. Users upper layer needs to save pairing records, so it uses this method to
solve this issue.
9/9
FCC
FCC NOTICE
The device complies with Part 15 of the FCC Rules. The device meets the requirements for
modular transmitter approval as detailed in FCC public notice DA00-1407.Transmitter Operation
is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interference that may cause
undesired operation.
CAUTION
The FCC requires the user to be notified that any changes or modifications made to this device
that are not expressly approved by Cypress Semiconductor may void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
it may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
a. Reorient or relocate the receiving antenna.
b. Increase the separation between the equipment and the receiver.
c. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
d. Consult the dealer or an experienced radio/TV technician for help.
LABELING REQUIREMENTS.
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are
met. This includes a clearly visible label on the outside of the OEM enclosure specifying the
appropriate identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID,
in any case the end product must be labeled exterior with.
To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior
of the end product.“Contains Transmitter module FCC ID S78-I482E”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Fiver
Create Date                     : 2016:11:07 12:05:13+08:00
ICN App Name                    : Infix ä¸fiä¸ı盋
ICN App Platform                : Windows
ICN App Version                 : 6.38
Modify Date                     : 2016:11:09 09:54:35
Title                           : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2016:11:07 12:05:13+08:00
Creator Tool                    : Adobe Acrobat Pro 10.1.16
Format                          : application/pdf
Creator                         : Fiver
Document ID                     : uuid:4b358b28-b53e-4850-a7c8-32a23a1f73c9
Instance ID                     : uuid:b255ea78-867e-44e7-8a37-7daf57f3fc18
Producer                        : Adobe Acrobat Pro 10.1.16
Page Count                      : 10

EXIF Metadata provided by EXIF.tools