Bayerische Motoren Werke 766S Automotive Remote User Manual ba

Download:
Mirror Download [FCC.gov]
Document ID	225396
Application ID	GyNzFXo397T3wL6rusrtNQ==
Document Description	Manual Part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.48kB (181004 bits)
Date Submitted	2002-02-07 00:00:00
Date Available	2002-02-07 00:00:00
Creation Date	2002-02-05 13:52:02
Producing Software	Acrobat Distiller 3.01 für Power Macintosh
Document Lastmod	2002-02-06 19:00:21
Document Title	ba.book
Document Creator	FrameMaker 5.5.6
Document Author:	ChB

2 Ignition on:
All vehicle systems are ready for operation
Insert the remote control unit all the way
into the ignition lock. This also activates the
radio mode.
When the remote control unit is in the
ignition lock you can start the engine
without first switching on the ignition.<
Switching ignition on and off
0 Ignition off:
The indicator lamps in the Info Display go
out. Only the automatic transmission's
range display remains visible for a brief
period
Removing the remote control unit
from the ignition lock
Press the remote control unit in briefly; it is
ejected and now protrudes slightly from the
lock. This procedure will also switch off the
ignition if it is on.
Switch off the engine before removing
the remote control unit from the ignition lock.
The transmission automatically shifts to
position P – Interlock.<
Do not depress the brake pedal until
you are ready to start the engine. If
you press the start/stop button while the
brake pedal is depressed the engine will
start immediately .<
If the remote control is still in the ignition
lock when the driver's door is opened, a
gong will sound and a message will appear
in the Info Display.
Controls
Driving tips
The radio mode is automatically
deactivated:
> After approx. 30 minutes, when a door is
closed and the system does not register
the presence of any individuals in the
vehicle
> Immediately, when the vehicle is locked
from the outside.<
Navigation
outside temperature appear in the Info
Display
Entertainment
Ignition lock
Communications
Driving
At a glance
ba.book Seite 59 Dienstag, 29. Januar 2002 4:03 16
Continue to press the start /stop button to
switch the radio mode on and off or switch
the ignition on and off.
59
Online Edition for Part No. 01400156660 – © 01/02 BMW AG
Reference
Mobility
1 Radio mode
In this mode several systems, such as the
Control Center, parked-car ventilation,
etc., are available for use. The time and
Driving
ba.book Seite 60 Dienstag, 29. Januar 2002 4:03 16
Starting the engine
stationary. Instead, begin to drive immediately at a moderate engine speed.
Under the following conditions you should
press the accelerator pedal halfway down
when starting:
> If the engine fails to start on the first
attempt, for instance, if it is very hot or cold
> During a cold start at high altitudes, from
approx. 3281 ft/1000 m, at very low
temperatures, from approx. + 5 7/–15 6.
Do not allow the engine to run in
enclosed spaces. The exhaust gases
contain carbon monoxide, an odorless and
colorless, but highly toxic gas. Breathing
the exhaust gases poses an extreme health
risk, and can lead to unconsciousness and
death.
Never leave the vehicle parked with the
engine running, as it would then pose a
potential safety hazard.<
1. Insert the remote control unit all the way
into the ignition lock
2. Depress the brake pedal
3. Maintain pressure on the brake pedal
and briefly press the start /stop button.
You can release the brake pedal as soon as
the engine starts.
Your BMW is equipped with the
convenience starting feature. After
depressing the brake pedal, all you need to
do is briefly press the start /stop button.
The system responds by automatically
engaging the starter and allowing it to run
until the engine starts, after which it then
disengages automatically.
The automatic starting mode will not
operate or will be canceled if the battery
voltage is low. It is then possible to start the
engine using electrical power from an
outside source, refer to page 193.
The engine starts immediately in response
to pressure on the button at speeds of
roughly 3 mph/5 km/h and above. It is not
necessary to depress the brake pedal.<
Do not allow the engine to warm up by
leaving it running while the vehicle remains
Refrain from starting the vehicle
repeatedly at brief intervals, and
avoid an excessive number of starting
attempts if the vehicle fails to start;
repeated activation of the starter over an
extended period would allow unburned or
only partially combusted fuel to enter the
catalytic converter, where it can cause
overheating and damage to the unit.<
Switching off the engine
With the vehicle stationary, briefly press the
start/stop button. This also activates the
radio mode.
Should exceptional circumstances
render it necessary for you to switch
off the engine while the vehicle is moving,
press the start/stop button for approx.
1 second.
If you maintain pressure on the start /stop
button for longer than two seconds while
switching off the ignition, the remote
control unit will be ejected.<
Always remove the remote control
unit from the ignition lock before
leaving the vehicle.<
Parking brake
The concept
Your BMW is equipped with an electromechanical parking brake.
The parking brake is primarily intended to
prevent the vehicle from rolling while
parked.
60
Online Edition for Part No. 01400156660 – © 01/02 BMW AG
Manual engagement
Press the button briefly, the
word PARK appears briefly in
the Info Display. The indicator
lamp
appears in red in
the Info Display when the
parking brake is engaged, refer to page 14.
The indicator lamp
goes out
soon after you have switched off the
ignition.<
If exceptional circumstances should
make it necessary to engage the
parking brake while the vehicle is in motion,
maintain pressure on the button.
The indicator lamp appears in red in the
Info Display. A gong sounds at the same
time.
The brake lamps come on.
The vehicle continues to brake automatically for as long as you maintain pressure
on the button.<
When you brake the vehicle to a
virtual stop, i.e., down to a speed of
approx. 2 mph/3 km/h or below, the
parking brake remains engaged.
The indicator lamp
in the Info Display
appears in red. Press the button briefly to
disengage the parking brake manually.<
Controls
Driving tips
Because this function is activated using the
brake system's hydraulic circuits, the
response of the brake pedal may change
slightly. Engagement may also be accompanied by activation noise – this is normal.
When leaving the vehicle, always
release the remote control unit from
the detent in the ignition lock; this precaution prevents children from disengaging the
parking brake, etc.
The parking brake can still be engaged at
any time when the remote control unit is
released from the detent. It is only possible
to disengage the parking brake with the
ignition on.<
Navigation
Brake pedal feel
Provided that the remote control unit
is engaged in the ignition lock, you
can also release the parking brake after the
engine has been switched off. This function
is intended for use in automatic car
washes, etc.<
Entertainment
An electrohydraulic mechanism then
engages the parking brake to prevent the
rear wheels from turning whenever you
switch off the engine.
When the engine is running, parking brake
engagement is controlled by the brake
system's hydraulic circuits, which act on
the disc brakes at the front and rear
wheels.
Communications
> Automatically, through activation of the
Automatic Hold mode, refer to next
column.
With the ignition on, briefly
press the button: the indicator
lamp in the Info Display goes
out.
Automatic Hold
You can activate this feature after starting
the engine; it then remains operational until
the next time the engine is switched off.
This feature provides supplementary
support during vehicle operation by automatically engaging and releasing the
parking brake during stops at traffic lights,
61
Online Edition for Part No. 01400156660 – © 01/02 BMW AG
Mobility
> Manually, by briefly pressing the button
Manual release
Reference
You have two separate options for
engaging the parking brake:
At a glance
ba.book Seite 61 Dienstag, 29. Januar 2002 4:03 16
Driving
ba.book Seite 62 Dienstag, 29. Januar 2002 4:03 16
in stop-and-go traffic, etc. As the vehicle
then no longer tends to creep when the
transmission is engaged, it is no longer
necessary to hold the vehicle by
depressing the brake pedal.
It prevents the vehicle from rolling backward during uphill starts.
The parking brake also engages automatically when you switch off the engine after
stopping the vehicle.
You can activate and deactivate the
Automatic Hold feature by selecting the
"Settings" menu in the Control Center.
A description of the Control Center is
provided on page 19.
Automatic Hold activation/
deactivation
You can also deactivate Automatic Hold by pressing the
button while the vehicle is
stationary. The vehicle remains
stationary, the indicator lamp
changes from green to red. Press the
button again to release the parking brake.
Driving with Automatic Hold
The parking brake engages automatically
when the vehicle comes to a stop. The indicator lamp
in the Info Display
appears in green.
To start off again, simply depress the
accelerator pedal. The parking brake
disengages automatically, and the indicator lamp
goes out.
Do not drive through an automatic car
wash with the Automatic Hold on and
the engine running. The system would
engage the parking brake while the vehicle
is stationary.<
Parking with Automatic Hold
The parking brake engages automatically
when you stop the vehicle and switch off
the engine. The indicator lamp
changes from green to red.
1. Select "Settings"
2.
Confirm your selection
3. Select "AUTO P." Press the controller to
activate/deactivate the desired function.
> Automatic Hold is activated.
The green AUTO P status message in the
Info Display shows you that the system is
ready for operation
> Automatic Hold is deactivated.
The green AUTO P status message disappears from the Info Display panel.
You can program the programmable
function button on the steering wheel
to control the Automatic Hold function,
refer to page 51.
This will allow you to activate and deactivate the Automatic Hold function quickly
and without distraction from traffic and
road conditions.<
Provided that the remote control unit
is engaged in the ignition lock, you
can also release the parking brake manually after switching off the engine, refer to
page 61. This option is useful in automatic
car washes, etc.
Automatic Hold is deactivated.<
When leaving the vehicle, always
release the remote control unit from
the detent in the ignition lock; this precaution prevents children from disengaging the
parking brake, etc. <
For your safety
Automatic Hold is automatically deactivated when
> the engine is switched off
> the system detects that the driver's seat
is not occupied while the engine is running
62
Online Edition for Part No. 01400156660 – © 01/02 BMW AG

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:02:06 19:00:21+01:00
Create Date                     : 2002:02:05 13:52:02Z
Title                           : ba.book
Author                          : ChB
Creator                         : FrameMaker 5.5.6
Producer                        : Acrobat Distiller 3.01 für Power Macintosh
Page Count                      : 4
Has XFA                         : No

EXIF Metadata provided by EXIF.tools