Beautiful Enterprise ATS2805BA Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2333179
Application ID	+EihKETMWjKX8maV5i1O/Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.41kB (1792590 bits)
Date Submitted	2014-07-23 00:00:00
Date Available	2014-07-23 00:00:00
Creation Date	2014-07-22 08:30:01
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2014-07-22 08:30:01
Document Title	Microsoft Word - WB-9805B module spec 7.22_BE version
Document Creator	PScript5.dll Version 5.2.2
Document Author:	User

Shenzhen Synchron Electronics Co.,Ltd.
WB‐9805B
Bluetooth module WB‐9805B Instructions
1.Product Overview
WB‐9805B is a high performance Bluetooth audio transmission Module. For receiving the
source from the audio transmitting wireless audio signal transmitted. Such as mobile phones.
Bluetooth adapter ., etc. Also includes an audio decoder chip 16 chip DAC output Can directly
drive headphones. Class 2 power, Use Bluetooth 4.0 standard. Transmission speed up to 3M bit/S.
2.Application
This module is mainly used for short distance transmission of music You can easiy connect
laptops, cell phones, PDA and other Bluetooth devices.
※ Bluetooth speaker ;
※ Bluetooth Stereo Headset;
※ Speakerphone;
※ Support for external radio;
※ Module built 7 COM and 8 SEG display driver.(5X7 LED, 7X8 LCD);
※ Three groups of 6 bit digital to analog conversion;
※ Bluetooth support background operation control other equipment;
※ Modules with U disk interface. SD/TF/MMC card interface. Music format support
MP3,WMA,APE. FLAC,WAV (Requires certification license);
3.Product Specifications:
Bluetooth Specification
Bluetooth V4.0 / V2.1+EDR (without LE)
Can support the Bluetooth communication
Profile
A2DP;AVRCP,HFP,SPP,BAS,BLE
DIS,FMP,HRP,HRS,HTP,HTS,IAS,LLS
≤60mA
Working current(Bluetooth Mode)
Standby Current
Operating Voltage
Operating temperature range
Wireless transmission range
≤0.03mA
Supports two kinds of voltage input DC5V or
BATT(3.4 ‐ 4.2V )
‐10℃ to +45℃
15Meter
Transmission power
CLASS 2 ‐6dB ~+4dB
Sensitivity
‐87 Bm＠ 0.1﹪ BER
Frequency Range
2.402GHz‐2.480GHz
External Interface
GPIO,I2C,Speaker,I2S,Microphone,IR,SD/SD/TF,M
MC,USB
Audio Performance
High acoustic fi easily soon
Audio SNR
85dB @ 500mVrms Output
Distortion
<0.05% @500mVrms output
Module size
15x32x2.5mm
Shenzhen Synchron Electronics Co.,Ltd.
WB‐9805B
Channel No.
79
Date Rate
1 Mbps for Basic Rate using GFSK
2 Mbps for Enhanced Data Rate using π
/4-DQPSK
3 Mbps for Enhanced Data Rate using 8DPSK
GFSK, π/4-DQPSK,8DPSK
Modulation Type
4. The module outline drawing in kind
WB‐9805B
5.Pin Description
WB‐9805B
Shenzhen Synchron Electronics Co.,Ltd.
WB‐9805B
6. Module pin details of the describes:
Pin Name
Pin Description
GND
GND
GPIO‐B14
General input and output ports(ADC port)
GP10‐B15
General input and output ports(ADC port)
RTCVDD
IC intermal power supply.can not takd the load
ON/OFF
Soft switch ,reset pin
GPI0‐B13
General input and output ports
GPI0‐B2
SD CLK
GPI0‐B1
SD CMD
GPI0‐B8
SD DATO
10
LOSCO
32.768KHz crystal oscillator output
11
LOSCI
32.768KHz crystal oscillator input
12
GP10 B9
General input and output ports.FMCLK
13
GP10 ‐A15
General input and output ports,TW112C‐SCL
14
GP10 ‐A16
General input and output ports,TW112C‐SDA
15
GP10 ‐A8
General input and output ports
16
GP10 ‐A6
General input and output ports
17
GP10 ‐A12
General input and output ports
18
GP10 ‐A5
General input and output ports
19
GP10 ‐B7
12S‐LR
20
GP10 ‐B6
12S‐DATA
21
GP10 ‐B5
12S‐BCLK
22
GP10 ‐BO
12S‐MCLK
23
IR
IR
24
GP10‐A10
General input and output ports
25
GP10‐A11
General input and output ports
26
GP10‐A30
General input and output ports
27
GP10‐A29
General input and output ports
28
GP10‐A28
General input and output ports
29
GP10‐A27
General input and output ports
30
GP10‐A26
General input and output ports
31
GND
GND
32
GP10‐A23
General input and output ports
33
GP10‐A24
General input and output ports
34
GP10‐A25
General input and output ports
35
GP10‐B19
General input and output ports,(line inDET)
Pin Number
Shenzhen Synchron Electronics Co.,Ltd.
WB‐9805B
36
USBDM
USB DP
37
USBDP
USB DM
38
AGND
AGND
39
AOUTL
Left channel output
40
AOUTR
Right channel output
41
LINEINR
Right channel line input
42
LINEINL
Letf channel line input
43
MICIN
MIC IN
44
FMINL
FM Left channel input
45
FMINR
FM Ringht channel input
46
AVCC
Internal regulated power supply output pin ‐3.0V
47
LRADC1
ADC port can be connected to key
48
VCC
Internal regulated power supply output pin ‐3.V
49
VBAT
Battery power input.input supply range 3.4V‐4.2V
50
DC5V
DC5V power input,input supply range 4.75‐5.25V
51
GND
GND
7. Module Outline dimensions
WB‐9805B
PCB
Shenzhen Synchron Electronics Co.,Ltd.
WB‐9805B
8.Reference circuit diagram
WB‐9805B
9.Notice for Bluetooth application
A. As for the Bluetooth apply in different environmemt,the influence of wireless signal even
Bluetooth effected by the environment greatly.Wirdless signals will be absorbed by something
like ad trees,metal obstacles.
B. Bluetooth module are placed in the a housing.Because the metal shell greatly effect to the
wireless signal transmission, suggest not installed inmetal shell.
C. PCB board:the antenna of Bluetooth module is the PCB antenna,as for the metal will weaken
the signal,so it is strictly prohibited shop and go line under the antenna module,it is better to
hollow out.
D. WB‐9805B must be added coupling capacitor for directly drive headphones;
E. Used pull switch off the power mode, power‐off must increase the discharge circuits.
F.No SD＆USB function design,please add test points for SD＆USB order to facilitate upgrade the
software used.
Shenzhen Synchron Electronics Co.,Ltd.
WB‐9805B
10. Caution for user
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter module must not be co‐located or operating in conjunction with
any other antenna or transmitter.
This End equipment should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or
co‐location with another transmitter), then the FCC authorization is no longer considered valid
and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator
will be responsible for re‐evaluating the end product (including the transmitter) and obtaining a
separate FCC authorization.
Shenzhen Synchron Electronics Co.,Ltd.
WB‐9805B
End Product Labeling
The final end product must be labeled in a visible area with the following:
“Contains FCC ID:UZZATS2805BA”.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user’s manual of the end product which integrates this
module.
Canada Statement
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Caution Exposure:
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS102 and
users can obtain Canadian information on RF exposure and compliance.
Le dispositif répond à l'exemption des limites d'évaluation de routine dans la section 2.5 de
RSS102 et les utilisateurs peuvent obtenir des renseignements canadiens sur l'exposition aux RF
et le respect.
The final end product must be labelled in a visible area with the following:
The Industry Canada certification label of a module shall be clearly visible at all times when
installed in the host device, otherwise the host device must be labelled to display the Industry
Canada certification number of the module, preceded by the words “Contains transmitter
module”, or the word “Contains”, or similar wording expressing the same meaning, as follows:
Contains transmitter module IC: 7633A‐ATS2805BA
This End equipment should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres
entre le radiateur et votre corps.
The end user manual shall include all required regulatory information/warning as show in this
Shenzhen Synchron Electronics Co.,Ltd.
WB‐9805B
manual.
*The Bluetooth module must be installed in A/V apparatus or ITE.
警告：
本產品符合低功率電波輻射性電機管理辦法：
第十二條
經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停
用，並改善至無干擾時方的繼續使用。
前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科
學及醫療用電波輻射性電機設備之干擾。
Thailand
NTC ID. XXXXXX-XX-XXXX

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : User
Create Date                     : 2014:07:22 08:30:01+08:00
Modify Date                     : 2014:07:22 08:30:01+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - WB-9805B module spec 7.22_BE version
Creator                         : User
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:686d3264-e7d8-499e-89f3-355ebc767f0d
Instance ID                     : uuid:be62281d-ff85-4774-a433-f8e54154581d
Page Count                      : 8

EXIF Metadata provided by EXIF.tools