Beautiful Enterprise SFQ14H Sound Rise Classic User Manual SFQ 14 THU QSG 20170615

Beautiful Enterprise Co., Ltd. Sound Rise Classic SFQ 14 THU QSG 20170615

Contents

Users Manual-1

Quick Start GuideSound Rise ClassicThe Sound Rise Classic Bluetooth Alarm Clock Speaker has high quality sound and many features for your enjoyment.Just follow the simple steps below to check it out.1. Press Bluetooth Pair Button to enter pairing mode to pair your device first. (The blue indicator will be fast flashing.)2. On your device, select “Sound Rise Classic” to connect.3. Most devices will not require password, if request the default is “1234”.4. Either use the Play Control buttons on the unit or your device to control playback and volume.Notes: To pair another device, press and hold Bluetooth Pair Button for 3 seconds. (The blue indicator will be fast flashing again to pair new device.)1. Press POWER button to power on the unit. (The white indicator will be on.)2. Press SOURCE button to select AUX-IN. (The green indicator will be on.)3. Connect your device to the AUX IN Cable on the back.4. Control playback on your device.5. Press Volume button on the unit or your device to adjust the playback volume. Title: QSGSize:(150x150mm)Printing:Black(double side printing)Material: 70g W/F paperDate:06-13-2017Bluetooth Playback1. Rotate ALARM SET knob on the side in the direction of arrow till your desired alarm wake-up time is shown. 2. Slide ALARM switch to ON position to turn the alarm on. 3. Slide WAKE TO switch to your desired wake up mode (BT/AUX/BEEP). If wake to BT (Bluetooth), please make sure to pair your device first and set the playback volume loud on your device for waking up . If wake to AUX, please make sure your device is playing and set the playback volume loud on your device for waking up.4. Press POWER to switch off the unit and goodnight.(Do not adjust the volume level on your device and the unit after setting.) Setting the Alarm1. Press SNOOZE / LIGHT button while alarm is sounding. The alarm sound is temporarily paused and starts again after 10 minutes later.You can repeat up to 12 times. 2. Slide and keep the ALARM switch to OFF position to shut off the alarm before leaving the room.Turning off the AlarmNotes: Slide the ALARM switch back to ON before your bedtime at night.Press the UQ3 button to switch on the sound enhancement for great enjoyment of your music. AUX-IN PlaybackCharging Your Mobile DeviceSimply connect your device to the USB ports on the top for charging.Notes: The maximum charging output is 5V/2.1A.Using UQ3 Sound EnhancementNotes: Do not set the volume too low on your device for alarm wakeup purpose.Sound Rise Classic2 33AUX IN CableALARM SET12SOURCE VolumePOWER4WAKE TO3ALARM2ONUQ3USB Charging5BluetoothPair Button14Play ControlPOWER121SNOOZE / LIGHTALARMOFF
Using and Setting the AlarmNotes: 1 Instruction ManualSound Rise ClassicUsing Snooze and Shutting off the Alarm4Wake to BT: (3 simple steps to set up your mobile device as the alarm music source) Wake to AUX: (3 simple steps to set up your mobile device as the alarm music source)READY: Once done, simply press POWER button to turn off the clock radio and goodnight. (Do not adjust the volume level on your device and the unit after setting.) PAIR and SELECT SONG: Press the PAIR button to pair your device. Then, select your favorite wake-up song to play.ⅠSET ALARM VOLUME: Press volume “+/-” button to the desired volume level to wake up. You may also need to adjust the volume level on your device for higher volume.ⅡREADY: Once done, simply press POWER button to turn off the unit and goodnight. (Do not adjust the volume level on your device and the unit after setting.) ⅢⅡⅢSET ALARM VOLUME: Press volume “+/-” button on the clock radio to the desirable volume to wake up. You may also need to adjust the volume on your device for higher volume.1Turn the alarm setting knob in the direction of arrow on the side of the unit to adjust the alarm pointers to your desired wake-up alarm time.2Slide the WAKE TO switch to select alarm sound among BT/AUX/BEEP modes.3Slide the ALARM switch on top of the unit to ON position to turn the alarm on.ⅠPLUG-IN and SELECT SONG: Press the POWER button to turn on the unit and press SOURCE button to select AUX. Plug the AUX-IN Cable on the back into your mobile device and select your favorite wake-up song to play. Notes: When alarm is sounding or snooze is in operation, all the control buttons on the unit will be temporarily disabled till alarm switch is slided to OFF to avoid interruption of alarm operation.When waking up to Bluetooth or AUX, Sound Rise Classic will “play” the current song on your connected/plugged in device. If no audio signal is detected when the alarm goes off, Sound Rise Classic will wake you with its built-in chime after a while.If you prefer to get some more sleep after the alarm goes off, simply press SNOOZE / LIGHT button while the alarm is sounding.The alarm sound will go off . The alarm will sound again after 10 minutes. (The snooze function will repeat 12 (Max.) times.) 11Title: Instruction ManualSize:(150x150mm)Printing:Black(double side printing)Material: 70g W/F paperDate:06-15-2017WAKE TO32–/+PAIRPOWERSNOOZE / LIGHT2 If you want to shut the alarm off completely, simply slide the ALARM switch to OFF position to turn off the alarm before leaving the room. SNOOZE / LIGHTNotes: Slide the ALARM switch back to ON before your bedtime at night. ALARMONALARMOFFDo not set the volume too low on your device for alarm wakeup purpose.
Instruction ManualSound Rise Classic12Listening with AUX-INCharging your Mobile DevicesUsing the BacklightAUX IN CableSimply, press the SNNOZE / LIGHT button to momentarily turn the backlight on for 5 seconds to see the time.Using UQ3 Sound EnhancementPress the UQ3 button to turn on/off the UQ3 effect for great enjoyment of your music. The power indicator will flash once when UQ3 is turned on and flash twice when UQ3 is switched off.Bluetooth Pairing12•• Listening with BluetoothIf the unit has been paired before, the blue indicator will flash slowly a few times then pairing your devices automatically.Simply press the PAIR button directly, the unit will turn on automatically and start pairing mode. The blue indicator will flash rapidly.Playing Music via Bluetooth1After pairing, either use the Play Control buttons on the Sound Rise Classic or your device to control playback. 2You can change the volume by either using the Volume buttons on the Sound Rise Classic or adjusting the volume on your paired device. For max volume, turn both volumes to maximum. Connect any device with a standard (3.5mm) headphone jack using the AUX-IN Cable attached on the back of the Sound Rise Classic. Turn on the unit and then press the SOURCE button until the green indicator stays on to enter the AUX IN mode. You can charge most USB chargeable devices directly from the Sound Rise Classic. Simply connect your device to either USB ports on the top of Sound Rise Classic to begin charging. Notes: The maximum charging output is 5V/ 2.1A. We need to pair your mobile device with the unit before using the Bluetooth. On your device, open your Bluetooth setting menu to detect available devices. Once Sound Rise Classic is detected, select it from the list of available devices to connect. On most devices, no password is needed to pair, however, if a password is requested, the default password is “ 1234”. Notes:To pair another new device, simply press and hold the PAIR button for 3 seconds to disconnect currently paired device. The Bluetooth indicator will flash rapidly again and select “Sound Rise Classic” on your new device. 2Play Control VolumePAIRSNOOZE / LIGHTPower Indicator UQ3USB ChargingSound Rise Classic
Title:Installation InstructionsSize:(150x150mm)Printing:Black(double side printing)Material: 100g W/F paperDate:06-15-2017 1 Insert the DC plug of the supplied power adaptor into the DC IN jack on the back of the unit. System Hardware SetupThe Hotel version of Sound Rise Classic includes a bracket to ensure the DC power jack cannot be removed. 1Sound Rise ClassicInstallation Instructions for Hotel StaffFor additional security, it also includes a lanyard to allow tethering of the Sound Rise Classic to furniture if required. See instructions below for fitting. 342 AB65Unscrew and open the battery door and then insert the battery into the battery compartment, tighten the screw on battery door.screwPlace the bracket onto the DC plug. Insert the tabs of the bracket into the slots of the system ( ), and push the bracket up to lock it in place ( ). Align the screw hole on the bracket and the unit, and tighten the screw to fix the bracket to the unit. Fix the end of the lanyard to a secure and firm place using the supplied screw. (Or other screw if applicable for fixing on different places.)Leave the quick start guide in the guest room with the Sound Rise Classic. 12V12V12VBA12V12V
2Sound Rise ClassicInstallation Instructions for Hotel StaffBattery ReplacementThere is a backup battery for keeping the clock time for power outage. When the level of backup battery is low, the power indicator will flash. It is the time to replace the battery.Caution: To avoid battery leakge, please make sure to replace battery when the battery is low.Setting the TimeFor the first time setup , please set the time of the clock.Rotate the TIME SET knob in the direction of arrow on the back of the unit to adjust the pointers to the desired time by using a Philips screw driver.TIME SETSystem Reset Notes: Turn on the unit, then press and hold SNOOZE / LIGHT and PLAY button simultaneously for 5 seconds to reset the unit to the default settings for a new hotel guest, and the unit will be powered off ( Once reset, both of the indicators will flash once and then switch off. )After reseting the unit , the Bluetooth connection and the previous user settings (volume setting) will also be reset to the default setting. SNOOZE / LIGHTPLAY/PAUSE

Navigation menu