Behringer Ultragraph Pro Fbq1502 Brochure FBQ6200/FBQ3102/FBQ1502
Behringer FBQ1502 Brochure FBQ6200_FBQ3102_FBQ1502_WebBrochure Behringer - FBQ1502 - Brochure
Behringer FBQ1502 Brochure fbq6200_fbq3102_fbq1502_webbrochure Behringer - FBQ1502 - Brochure
Behringer FBQ6200 Brochure FBQ6200_FBQ3102_FBQ1502_WebBrochure Behringer - FBQ6200 - Brochure
Behringer FBQ6200 Brochure fbq6200_fbq3102_fbq1502_webbrochure Behringer - FBQ6200 - Brochure
Behringer FBQ1502 Brochure fbq6200_fbq3102_fbq1502_webbrochure Behringer - FBQ1502 - Brochure
2015-06-29
: Behringer Behringer-Ultragraph-Pro-Fbq1502-Brochure-752019 behringer-ultragraph-pro-fbq1502-brochure-752019 behringer pdf
Open the PDF directly: View PDF 
.
Page Count: 6
Audiophile Multi-Band Stereo
Graphic Equalizers with FBQ
Feedback Detection System
ULTRAGRAPH PRO FBQ6200 —
Audiophile 31-Band Stereo Graphic
Equalizer with FBQ Feedback
Detection System
Audiophile 31-band stereo
graphic equalizer for live and
studio applications
Dedicated Limiters with gain
reduction meters for each channel
protect your sound system from
overload and distortion
Pink noise generator provides test
signals to adapt your sound system
to any room acoustics
Relay-controlled hard bypass with an
auto-bypass function during power
failure (failsafe relay)
ULTRAGRAPH PRO FBQ3102 —
Audiophile 31-Band Stereo Graphic
Equalizer with FBQ Feedback
Detection System
Professional 31-band stereo
graphic equalizer for live and
studio applications
Relay-controlled hard bypass with an
auto-bypass function during power
failure (failsafe relay)
ULTRAGRAPH PRO FBQ3102 —
Audiophile 31-Band Stereo Graphic
Equalizer with FBQ Feedback
Detection System
Professional 15-band stereo
graphic equalizer for live and
studio applications
Professional audio engineers have
known for decades that a good EQ makes
all the dierence in how a performance is
perceived. Although multi-band graphic
equalizers have been around for a long
time, they have changed very little…
until now! BEHRINGER ULTRAGRAPH PRO
Series equalizers take a giant leap forward
technologically, providing robust feature
sets and our proprietary FBQ Feedback
Detection System—at a price that makes
them a must-have for anyone who records
or operates a live sound system.
How Does Equalization Work?
Imagine the audio frequency range as
a very wide highway with lots of “lanes”.
Each of these lanes represents a specic
frequency band.
• The lanes on the left side contain
the really low frequency content,
mainly bass, bass vocals, and the kick
and tom drums
• The middle lanes make up the
fundamental zone of most musical
instruments and the male and
female vocals
• The right-hand lanes have all the
high-frequency stu, such as snare
drums, cymbals, higher pitched
percussion instruments and the
content that adds sizzle to the mix
BEHRINGER FBQ-PRO EQs allow you
to control the ow of audio trac in each
of these lanes. The more lanes (bands)
you have, the more control you have over
the nal sound. When properly applied,
EQ makes it possible to hear all of these
frequency ranges equally, thus the
term equalization.
ULTRAGRAPH PRO
FBQ6200/FBQ3102/FBQ1502
Equalizers
Page 2 of 6
Common features
Revolutionary FBQ Feedback
Detection system instantly reveals
critical frequencies and can also be
used as audio analyzer
Mono subwoofer output with
dedicated level control and
adjustable crossover frequency
Additional sweepable high and
low-cut lters for each channel
remove unwanted frequencies
e.g. oor rumble, hiss etc.
(low-cut switch only FBQ1502)
Highly accurate 8-segment LED
input/output metering and input
gain controls for easy level setting
Ultra-low noise audio operational
ampliers for highest signal integrity
Servo-balanced inputs and outputs
with ¼" TRS and gold-plated
XLR connectors
Shielded toroidal power transformer
for ultra-low noise performance
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
Special Tools for Low Frequencies
The low-frequency sound range
requires special attention. That’s why the
FBQ-PRO Series features a Low Cut lter,
in addition to the frequency faders, to
help remove unwanted low frequencies
such as oor rumble, room resonance,
electrical hum, etc. This lter is preset
on the FBQ1502 to remove all content
below 25 Hz, which can really eat into
your power amp’s headroom. On the
FBQ3120 and FBQ6200 models we
take it a step further, including variable
High- and Low-Cut lters per channel
with a sweepable frequency dial for even
more control.
Crossover Not Required
Speaking of special low-frequency
tools, all three FBQ-PRO models feature
a dedicated subwoofer output with an
adjustable (30 – 200 Hz) cut-o frequency.
Balanced XLR Outs are provided so you
can connect to power amps, or directly
to your active subwoofers, without any
additional hardware—just another
example of how BEHRINGER saves
you money.
FBQ Feedback Detection System
The FBQ Feedback Detection System
is one of the most outstanding features
of our graphic equalizers. This ingenious
circuitry helps you recognize and
eliminate feedback frequencies
immediately. When feedback is sensed
in a specic frequency range, the LED
on the associated fader lights, so you
know at a glance which fader to lower
to eliminate the feedback. BEHRINGER’S
proprietary FBQ Feedback Detection
System makes it easy for even the novice
operator to defeat live sound’s natural
enemy—feedback!
Stereo or Double-Duty?
There are two reasons to buy a stereo
EQ—to run your Front Of House (FOH)
system in stereo, or to use one side for
mono FOH while the other side EQs your
monitors, which is usually where feedback
problems start.
FBQ6200’s Added Features
The agship of the series, the FBQ6200
has all the features mentioned above,
plus switchable Limiters per channel
with separate Threshold controls,
long-throw 45 mm frequency faders
for added precision, and a built-in
Pink Noise generator that enables the
FBQ6200 to pull double-duty as an audio
spectrum analyzer.
Superb Audio, Sound Value
FBQ-PRO Series graphic EQs bring out
the best in your sound system, and your
performance, whether you use them in
the studio or at your next live gig. We dare
you to compare the FBQ1502, FBQ3102
or FBQ6200 against the competition.
Once you do, you’ll choose BEHRINGER
again and again for both audio quality
and value. Test Drive one today at your
authorized BEHRINGER dealer.
ULTRAGRAPH PRO
FBQ6200 / FBQ3102
FBQ1502
Page 3 of 6
Audio In/Out switch
engages or bypasses
entire EQ function
FBQ6200 Front Panel
FBQ3102 Front Panel
FBQ6200 / FBQ3102 Rear Panel
Audio In/Out switch
engages or bypasses
entire EQ function
Subwoofer switch
activates/deactivates
subwoofer output
Low Cut control adjusts
lower cut-o frequency
between 10 and 40 Hz
I/O Meter In/Out switch
displays either input or
output signal level
Limiter meter
displays amount
of gain reduction
Input Level
control
Input/Output Level Meter
displays signal level
Limiter switch activates/
deactivates built-in limiter
(per channel)
Threshold control
sets amount of
gain reduction
Pink Noise switch
activates/deactivates
built-in signal generator
Pink Noise Meter
displays generator
signal level
Noise Level control
sets level of
generator signal
FBQ switch activates/
deactivates built-in Feedback
Detection System
High Cut control adjusts
upper cut-o frequency
between 2.5 and 30 kHz
Range switch toggles
maximum EQ fader range
between ±12 and ±6 dB
31 sliding EQ faders for
boost/cut of individual
frequency bands with LEDs
Sub Out Meter displays
signal level at output
connector on rear panel
Subwoofer
Level control
Input/Output Level Meter
displays signal level
I/O Meter In/Out switch
displays either input or
output signal level
Input Level control
Low Cut control adjusts
lower cut-o frequency
between 10 and 40 Hz
FBQ switch activates/
deactivates built-in Feedback
Detection System
Range switch toggles
maximum EQ fader range
between ±12 and ±6 dB
31 sliding EQ faders per
channel for boost/cut of
individual frequency bands
with LEDs
High Cut control adjusts
upper cut-o frequency
between 2.5 and 30 kHz
Balanced XLR &
balanced/unbalanced
¼" TRS Inputs
Standard IEC
Power socketPower switch
Sub Out XLR sends LF
content to subwoofers
X-Over Frequency control
selects desired subwoofer
frequency cut-o
Balanced XLR &
balanced/unbalanced
¼" TRS Outputs
ULTRAGRAPH PRO
FBQ6200 / FBQ3102
FBQ1502
Page 4 of 6
FBQ1502 Front Panel
FBQ1502 Rear Panel
Output Level
Meter displays
signal level
Range switch toggles
maximum EQ fader
range between
±12 and ±6 dB
15 sliding EQ faders per
channel for boost/cut
of individual frequency
bands with LEDs Power switch
FBQ switch
activates/deactivates
built-in Feedback
Detection System
Audio In/Out switch
engages or bypasses
entire EQ function
Input Level control
Standard IEC
Power socket
Balanced XLR
& balanced/
unbalanced
¼" TRS Outputs
Balanced XLR
& balanced/
unbalanced
¼" TRS Inputs
Sub Out XLR
sends LF content
to subwoofers
X-Over Frequency
control selects
desired subwoofer
frequency cut-o
Low Cut switch
activates high-pass
lter removing
content below 25 Hz
Stereo PA with Two Monitor Mixes
XENYX X2442USB B1800D-PRO Active Subwoofers B815NEO Active Loudspeakers
F1320D Active
Floor Monitors
CH 1/2 OUT
CH 1/2 OUT
Main OUT
R/L
AUX 1/2
OUT
ULTRAGRAPH PRO FBQ1502
ULTRAGRAPH PRO FBQ3102
ULTRAGRAPH PRO
FBQ6200 / FBQ3102
FBQ1502
Page 5 of 6
Specications
FBQ6200
Audio Inputs
Inputs RF-ltered, servo-balanced XLR and
¼" TRS connectors
Impedance 40 kW balanced and unbalanced
Maximum input level +21 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1 kHz
Audio Outputs
Outputs servo-balanced XLR and
¼" TRS connectors
Subwoofer Out balanced XLR connector,
level variable o to 0 dB
Crossover frequency variable, 30 - 200 Hz
System Specications
Frequency response 10 Hz to 30 kHz, ±3 dB
S/N ratio 22 Hz to 22 kHz >94 dB @ +4 dBu
Distortion (THD) typ. 0.006% @ +4 dBu, 1 kHz, Gain 1
Crosstalk typ. -65 dB @ 1kHz
Roll-O Filter Section
Type 12 dB/oct., Butterworth
Input variable (-15 dB to +15 dB)
Low Cut variable (10 Hz to 400 Hz)
High Cut variable (2.5 kHz to 30 kHz)
Graphic Equalizer
Type analog 31-band equalizer
Frequency range 20 Hz to 20 kHz in 31 1/3-octave bands
(ISO frequencies)
Bandwidth 1/3 octave
Control range ±6 dB or ±12 dB (switchable)
Limiter Section
Attack/Release 20 msec / 90 msec
Threshold variable, -6 dB to +22 dB (o)
LED meter Gain reduction 20/10/3/1 dB
Noise Generator
Type Pink noise, level variable, o to 0 dBu,
LED level meter -24/-12/-6/0 dB
Function Switches
FBQ activates the FBQ Feedback
Detection System
Audio In/Out switch to bypass the
equalizer functions
I/O Meter In/Out switches the meter display
from input to output
Range shift of the maximum cut/boost range
for all 31/15 bands
Low Cut —
Limiter activates the limiter
Pink Noise activates the noise generator
Subwoofer activates the subwoofer output
Indicators
Input/output level 8-segment LED display:
-24/-18/-12/-6/0/+6/+12 dB/CLIP
Subwoofer 4-segment LED display:
-18/-12/0/+12 dB
Power Supply
Mains Voltage
USA / Canada 120 V~, 60 Hz
Europe / U.K. / Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
general export model 120/230 V~, 50 - 60 Hz
Power consumption 22 W
Fuse 100 - 120 V~: T 630 mA H / 200 - 240
V~: T 315 mA H
Mains connection standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D) approx. 5.90 x 5.23 x 18.97"
approx. 150 x 133 x 482.0 mm
Weight approx. 6.70 lbs
approx. 3.04 kg
FBQ6200
Audio Inputs
Inputs RF-ltered, servo-balanced XLR and
¼" TRS connectors
Impedance 40 kW balanced and
unbalanced
Maximum input level +21 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1 kHz
Audio Outputs
Outputs servo-balanced XLR and
¼" TRS connectors
Subwoofer Out balanced XLR connector
Crossover frequency variable, 30 - 200 Hz
System Specications
Frequency response 10 Hz to 30 kHz, ±3 dB
S/N ratio 22 Hz to 22 kHz >94 dB @ +4 dBu
Distortion (THD) typ. 0.006% @ +4 dBu, 1 kHz, Gain 1
Crosstalk typ. -65 dB @ 1kHz
Roll-O Filter Section
Type 12 dB/oct., Butterworth
Input variable (-15 dB to +15 dB)
Low Cut variable (10 Hz to 400 Hz)
High Cut variable (2.5 kHz to 30 kHz)
Graphic Equalizer
Type analog 31-band equalizer
Frequency range 20 Hz to 20 kHz in 31 1/3-octave bands
(ISO frequencies)
Bandwidth 1/3 octave
Control range ±6 dB or ±12 dB (switchable)
Limiter Section
Attack/Release —
Threshold —
LED meter —
Noise Generator
Type —
LED level meter —
Function Switches
FBQ activates the FBQ Feedback
Detection System
Audio In/Out switch to bypass the
equalizer functions
I/O Meter In/Out switches the meter display
from input to output
Range shift of the maximum cut/boost range
for all 31/15 bands
Low Cut —
Limiter —
Pink Noise —
Subwoofer —
Indicators
Input/output level 12-segment LED display: -30/-24/-18/-
12/-6/-3/0/+3/+6/+9/+12 dB/CLIP
Subwoofer —
Power Supply
Mains Voltage
USA / Canada 120 V~, 60 Hz
Europe / U.K. / Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 H
general export model 120/230 V~, 50 - 60 Hz
Power consumption 22 W
Fuse 100 - 120 V~: T 630 mA H / 200 - 240
V~: T 315 mA H
Mains connection standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D) approx. 5.90 x 3.50 x 18.99"
approx. 150 x 89 x 482.6 mm
Weight approx. 5.82 lbs
approx. 2.64 kg
ULTRAGRAPH PRO
FBQ6200 / FBQ3102
FBQ1502
Page 6 of 6
For service, support or more information contact the BEHRINGER location nearest you:
Europe
MUSIC Group Services UK
Tel: +44 156 273 2290
Email: CARE@music-group.com
USA/Canada
MUSIC Group Services NV Inc.
Tel: +1 702 800 8290
Email: CARE@music-group.com
Japan
MUSIC Group Services JP K.K.
Tel.: +81 3 6231 0454
Email: CARE@music-group.com
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only.
Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands. 985-10000-00498
FBQ1502
Audio Inputs
Inputs RF-ltered, servo-balanced XLR and
¼" TRS connectors
Impedance 40 kW balanced and unbalanced
Maximum input level +21 dBu balanced and unbalanced
CMRR typ. 40 dB, >55 dB @ 1 kHz
Audio Outputs
Outputs servo-balanced XLR and
¼" TRS connectors
Subwoofer Out balanced XLR connector
Crossover frequency variable, 30 - 200 Hz
System Specications
Frequency response 10 Hz to 30 kHz, ±3 dB
S/N ratio 22 Hz to 22 kHz >94 dB @ +4 dBu
Distortion (THD) typ. 0.006% @ +4 dBu, 1 kHz, Gain 1
Crosstalk typ. -65 dB @ 1kHz
Roll-O Filter Section
Type 12 dB/oct., Butterworth
Input variable (-15 dB to +15 dB)
Low Cut switchable, Cuto @ 25 Hz
High Cut —
Graphic Equalizer
Type analog 15-band equalizer
Frequency range 20 Hz to 16 kHz in 15 bands
(ISO frequencies)
Bandwidth 2/3 octave
Control range ±6 dB or ±12 dB (switchable)
Limiter Section
Attack/Release —
Threshold —
LED meter —
Noise Generator
Type —
LED level meter —
Function Switches
FBQ activates the FBQ Feedback
Detection System
Audio In/Out switch to bypass the
equalizer functions
I/O Meter In/Out —
Range shift of the maximum cut/boost range
for all 31/15 bands
Low Cut activates the high pass lter
Limiter —
Pink Noise —
Subwoofer —
Indicators
Input/output level 4-segment LED display:
-20/0/+6 dB/CLIP (output only)
Subwoofer —
Power Supply
Mains Voltage
USA / Canada 120 V~, 60 Hz
Europe / U.K. / Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
general export model 120/230 V~, 50 - 60 Hz
Power consumption 22 W
Fuse 100 - 120 V~: T 630 mA H / 200 - 240
V~: T 315 mA H
Mains connection standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D) approx. 8.46 x 1.75 x 18.99"
approx. 215 x 44.5 x 482.6 mm
Weight approx. 5.15 lbs
approx. 2.34 kg
Please note these specifications are preliminary and conceptual in nature, and as such are subject
to change as product development progresses. This information is supplied for market research
purposes only and is not to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.
ULTRAGRAPH PRO
FBQ6200 / FBQ3102
FBQ1502
