Beijing Jia An Electronic Technology Co AN2640SA-B BLE module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2831557
Application ID	5cV713NyWt67/wT1iDt9bA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.48kB (180997 bits)
Date Submitted	2015-12-06 00:00:00
Date Available	2015-12-06 00:00:00
Creation Date	2015-12-02 14:01:21
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-12-02 14:01:21
Document Title	Microsoft Word - AN2640SA-B Module Datasheet -V1.0_20151028.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	zhangchunxia

BEIJING JIA AN ELECTRONICS TECHNOLOGY CO.,LTD.
http://www.rf-products.com
AN2640SA-B Module Datasheet V1.0
Oct 28th 2015
AN2640SA-B Module Datasheet V1.0
Description
AN2640SA-B Module is designed based on
CC2640F128 Bluetooth Smart (BLE4.1)
System-on-Chip, fully supports the single
mode Bluetooth Low Energy operation. The
module provides the ability to either put your
entire application into the integrated ARM
Cortex M3 microcontroller, or use the module
in Network Processor mode in conjunction
with the microcontroller of your choice.
Features
1.
2.
3.
Bluetooth4.1, Single mode compliant-Supports master and slave modes
Build in CC2640F128 Bluetooth Smart System-On-Chip
RF Performance
– TX Power：+5dBm
– RX Sensitivity：-87dBm ~ -96dBm
4. Ultra low current consumption
– Transmit current(0dBm)：6.1mA
– Receiving current：5.9mA
5. Size: 15 mm×22 mm×2.0mm
Mechanical Drawing
22mm
2mm
15mm
Page
of
BEIJING JIA AN ELECTRONICS TECHNOLOGY CO.,LTD.
http://www.rf-products.com
AN2640SA-B Module Datasheet V1.0
Oct 28th 2015
Terminal Description
Pad Number
Name
Description
Pin Type
DIO0
GPIO, Sensor Controller
Digital I/O
DIO1
GPIO, Sensor Controller
Digital I/O
DIO2
GPIO, Sensor Controller
Digital I/O
DIO3
GPIO, Sensor Controller
Digital I/O
DIO4
GPIO, Sensor Controller
Digital I/O
DIO5
GPIO, Sensor Controller, High drive
capacity
Digital I/O
DIO6
GPIO, Sensor Controller, High drive
capacity
Digital I/O
DIO7
GPIO, Sensor Controller, High drive
capacity
Digital I/O
GND
Connect to GND
Ground pin
10
VDD
1.8V to 3.8V main chip supply
Power
11
DIO8
GPIO
Digital I/O
12
DIO9
GPIO
Digital I/O
13
DIO10
GPIO
Digital I/O
14
DIO11
GPIO
Digital I/O
15
DIO12
GPIO
Digital I/O
16
DIO13
GPIO
Digital I/O
17
DIO14
GPIO
Digital I/O
18
DIO15
GPIO
Digital I/O
19
JTAG-TMSC
JTAG TMSC, High drive capability
Digital I/O
20
JTAG-TCKC
JTAG TCKC
Digital I/O
Page
of
BEIJING JIA AN ELECTRONICS TECHNOLOGY CO.,LTD.
http://www.rf-products.com
AN2640SA-B Module Datasheet V1.0
Oct 28th 2015
21
DIO16
GPIO,High drive capability, JTAG_TDO
Digital I/O
22
DIO17
GPIO, High drive capability, JTAG_TDI
Digital I/O
23
DIO18
GPIO
Digital I/O
24
DIO19
GPIO
Digital I/O
25
DIO20
GPIO
Digital I/O
26
DIO21
GPIO
Digital I/O
27
DIO22
GPIO
Digital I/O
28
RESET_N
Reset, active-low. No internal pullup
Digital input
29
DIO23
GPIO, Sensor Controller, Analog
Digital/Analog I/O
30
DIO24
GPIO, Sensor Controller, Analog
Digital/Analog I/O
31
DIO25
GPIO, Sensor Controller, Analog
Digital/Analog I/O
32
DIO26
GPIO, Sensor Controller, Analog
Digital/Analog I/O
33
DIO27
GPIO, Sensor Controller, Analog
Digital/Analog I/O
34
DIO28
GPIO, Sensor Controller, Analog
Digital/Analog I/O
35
DIO29
GPIO, Sensor Controller, Analog
Digital/Analog I/O
36
DIO30
GPIO, Sensor Controller, Analog
Digital/Analog I/O
Specifications
Parameter
Min
Max
Unit
Operating Voltage
1.8
3.8
Operating Temperature
-40
85
℃
0.23
mA
Interval 30mS
0.35
mA
Interval 50mS
0.22
mA
Interval 100mS
0.12
mA
Interval 500mS
0.02
mA
µA
TX Power
-21
+5
dBm
RX Sensitivity
-87
-96
dBm
Storage Temperature
-40
150
℃
BLE Advertising
（Interval 100mS）
Current
Consumption
BLE
Connection
Sleep mode
Page
of
BEIJING JIA AN ELECTRONICS TECHNOLOGY CO.,LTD.
http://www.rf-products.com
AN2640SA-B Module Datasheet V1.0
Oct 28th 2015
Recommended PCB Layout for Package
5mm
1.6mm
0.7mm
23mm
1.27mm
0.4mm
1.77mm
11.43mm
15.2mm
16mm
Soldering Recommendations
Page
of
BEIJING JIA AN ELECTRONICS TECHNOLOGY CO.,LTD.
http://www.rf-products.com
AN2640SA-B Module Datasheet V1.0
Oct 28th 2015
The AN2640SA-B module is designed to comply with the FCC statement. FCC ID is VVJ-AN264
0SA-B. The host system using AN2640SA-B, should have label indicated FCC ID VVJ-AN2640S
A-B.
This radio should NOT be installed and operating simultaneously with other radio
FCC STATEMENT
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance co
uld void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital dev
ice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecti
on against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that inte
rference will not occur in a particular installation. If this equipment does cause harmful interferenc
e to radio or television reception, which can be determined by turning the equipment off and on, th
e user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is conn
ected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ
ment. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Page
of

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : zhangchunxia
Create Date                     : 2015:12:02 14:01:21+08:00
Modify Date                     : 2015:12:02 14:01:21+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - AN2640SA-B Module Datasheet -V1.0_20151028.doc
Creator                         : zhangchunxia
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:726c2cf5-a24e-4576-8b00-b7f430b9d528
Instance ID                     : uuid:06b4c565-80bd-4eb6-86ba-74cc53931287
Page Count                      : 5

EXIF Metadata provided by EXIF.tools