Beijing Jia An Electronic Technology Co ZB2530UPA-A Zigbee Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3412378
Application ID	M8LPPltXnTAdYCsdBBk6aQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.98kB (112191 bits)
Date Submitted	2017-06-02 00:00:00
Date Available	2017-06-02 00:00:00
Creation Date	2017-10-23 14:30:15
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-23 14:30:15
Document Title	Microsoft Word - ZB2530UPA-A User Manual -20170524.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	BJ108

ZB2530UPA-A Module Datasheet
V1.0
May 24 2017
—————————————————————————————————————————————
ZB2530UPA-A Module Datasheet V1.0
Introduction
The CC2530 is a system-on-chip (SoC) solution for
IEEE 802.15.4, Zigbee, and RF4CE applications.
The CC2530 combines the excellent performance of
a leading RF transceiver with an industry-standard
enhanced 8051 MCU, in-system programmable
Flash memory, 8-KB RAM, and many other powerful
features.
balun for a seamless interface with the CC2530.
This allows for a simple design of high performance
wireless applications.
This chip enables industrial grade applications by
offering state-of-the-art selectivity and co-existence,
excellent link budget, and low-voltage operation.
The CC2591 is a range extender for 2.4GHz RF
transceivers, transmitters, and SoC products from
Texas Instruments. The CC2591 increases the RF
link budget by providing a Power Amplifier (PA) for
higher output power and a Low Noise Amplifiler
(LNA) for improved receiver sensitivity. The CC2591
contains RF switches, RF matching, and an on-chip
Characteristics
Recommended Operating Conditions
Parameter
Min
Max
Unit
Operating Frequency
2405
2480
MHz
Operating Supply Voltage
2.0
3.6
Operating Temperature
-40
125
℃
Radio Characteristics
Parameter
Current Consumption
RX Sensitivity HGM
RX Sensitivity LGM
Specifications
TX：166mA
RX：24~27mA
-98.8dBm
-90.4dBm
Page - 1 -of 6
ZB2530UPA-A Module Datasheet
V1.0
May 24 2017
—————————————————————————————————————————————
Functional Block Diagram
CC2591
Control Logic for connecting the CC2591 to a CC2530 Device
There are three digital control pins(PA_EN, LNA_EN and HGM) on the CC2591 that control the state of the
chip. The bellowing table shows the control logic when connecting the CC2591 to a CC2530 device.
PA_EN
LAN_EN
HGM
Terminal Description
Pad
Number
Name
Pin Type
Description
P2_2
Digital I/O
Port 2.2
P2_1
Digital I/O
Port 2.1
P2_0
Digital I/O
Port 2.0
P1_7
Digital I/O
Port 1.7
P1_6
Digital I/O
Port 1.6
P1_5
Digital I/O
Port 1.5
P1_4
Digital I/O
Port 1.4
Page - 2 -of 6
Mode of Operation
Power Down
RX Low Gain Mode
RX High Gain Mode
TX
ZB2530UPA-A Module Datasheet
V1.0
May 24 2017
—————————————————————————————————————————————
P1_3
Digital I/O
Port 1.3
P1_2
Digital I/O
Port 1.2
10
P1_1
Digital I/O
Port 1.1, 20mA drive capability
11
P1_0
Digital I/O
Port 1.0, 20mA drive capability
12
P0_7
Digital I/O
Port 0.7
13
GND
Ground Pin
Connect to GND
14
GND
Ground Pin
Connect to GND
15
P0_6
Digital I/O
Port 0.6
16
P0_5
Digital I/O
Port 0.5
17
P0_4
Digital I/O
Port 0.4
18
P0_3
Digital I/O
Port 0.3
19
P0_2
Digital I/O
Port 0.2
20
P0_1
Digital I/O
Port 0.1
21
P0_0
Digital I/O
Port 0.0
22
RESET_N
Digital Input
Reset, active-low
23
VDD
Power
2V to 3.6V main chip supply
24
VDD
Power
2V to 3.6V main chip supply
Mechanical Drawing
Unit：mm
3.0
1.0
31..5
Tolerance：±0.2mm
15.0
IMPORTANT NOTE:
This module has been granted as Single modular approval.
Page - 3 -of 6
ZB2530UPA-A Module Datasheet
V1.0
May 24 2017
—————————————————————————————————————————————
The manufacturer is responsible to follow the instruction hereafter for the FCC compliance
requirement of the end product. Under such configuration, the FCC radiation exposure limits
set forth for an population/uncontrolled environment can be satisfied. The device with a Monopole
antenna gain with maximum gain 3.5dBi.
This device may only operate using an antenna of a type and maximum (or lesser) gain
approved by Beijing Jia An Electronics Thechnology Co,.Ltd, Antenna types difference or
having a gain greater than the maximum gain indicated for that type are strictly prohibited for
use with this transmitter.
Warning:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
Page - 4 -of 6
ZB2530UPA-A Module Datasheet
V1.0
May 24 2017
—————————————————————————————————————————————
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with minimum distance 20cm between the
radiator& your body.
Page - 5 -of 6
ZB2530UPA-A Module Datasheet
V1.0
May 24 2017
—————————————————————————————————————————————
This radio transmitter (identify the device by certification number) has been approved by FCC
to operate with the antenna types with the maximum permissible gain indicated.
The final end product must be labeled in a visible area with the following: Contains Transmitter
Module FCC ID:VVJ-ZB2530UPA-A
Page - 6 -of 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:118091e7-985b-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:03 22:25:29Z
Create Date                     : 2017:07:03 22:25:29Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:118091e7-985b-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools