Beijing Kangshuo Information Technology H02 Lenovo H02 Sports Bluetooth Headset User Manual
Beijing Kangshuo Information Technology Co.,Ltd Lenovo H02 Sports Bluetooth Headset Users Manual
Users Manual
Lenovo Sport Bluetooth Headset H02 User Guide Safety Instructions 1.Using headset at high volume for long time may cause per manent hearing loss. 2.It is recommended to adjust headset volume to a lower level before connection, and gradually increase the volume until it fits. 3.Do not use headset when driving, cycling, operating machines, or doing work that requires attention to external sound. 4.Thunderstorms can cause failure of headset, and increase risk of electric shock , so do not use headset during thunderstorms. 5.The headset is not suitable for high temperature or moisture environment to operate , such as in bathroom. 6.Do not use any corrosive or abrasive cleaners to clean the headset. 7.Do not disassemble or modify the headset for any reason, which may cause the headset to malfunction or burn. 8.Put the headset and packaging where is not accessible to children. Basic Accessories USB charging cable Headset body Earpieces Product Overview 1.Charging ports 2.Multi-function key 3.Microphone for call 4.Battery 5.LED indication light Status Indication Instruction LED Status Voice Reminder Turn on Blue light on for 1 second Power on Turn off Red light on for 1 second then off Power off Unconnected Blue light flashes twice slowly every 5 seconds Paring Red and blue light flash alternately Calling Blue light flashes once every 3 seconds Battery low Red light flashes Paring Battery low Charging The new headset has enough power to support you to complete pairing and dial a small number of calls. When the headset is connected to iOS device, headset's power volume will display at upper right corner of device screen. image sampler W hen the bat ter y is low, there are voice reminder s: "bat ter y low". Indicator light in red during power charging, in blue when battery is fully charged. Note: If do not charge the headset for long time, the battery life will be shortened. Recommend to charge the headset at least once a month. Power Bank usb adapter You can charge the headset via these devices personal computer power bank Pairing & Connecting Pairing a mobile phone Note: After pairing, do not need to re-pairing after restart the phone, Bluetooth headset will automatically connect to the phone connected last time. 1.In the first time to pair Bluetooth headset with phone, keep headset on of f status(refer to instruction of turning on/off headset), and turn on Bluetooth on phone to prepare. 2.Press and hold multi-function key on headset for about 7 seconds until indicator lightflashing alternately in red and blue, and hear a "Paring" voice reminder, then the headset in pairing mode. 3.Open the phone Bluetooth, search nearby Bluetooth devices. 4.When phone finds "Lenovo H02" in device list, click "Lenovo H02", and hear voice reminder "Connected" in headset, then the Bluetooth headset and phone have been paired successfully. 5.If Bluetooth version on phone is older than v2.1, then need to enter password "0000". Note: If fail to pair in 3 minutes, then repeat above steps to pair again. Pairing with the second phone 1.Follow the pair instruction to pair Bluetooth headset with the first phone. 2.Turn off the headset while turning off Bluetooth on the second phone as well. 3.Follow the pair instruction to connect the second phone. 4.After the second phone is connected, then activate the connection of Bluetooth headset on the first phone. Use Turn on Press and hold the multi-function key for 3 seconds, till blue light flashes for 1 second, and hear "power on" voice reminder from headset, then headphones is on. Turn Off Press and hold the multi-function key for 3 seconds, till red light flashes for 1 second, and hear "power off" voice reminder from headset, then headset is off. Charging When the headset is in charging by connecting to power source via USB cable, the headset's indicator light will be on in red, and be on in blue when battery is fully charged. Answer calls----When connecting to one mobile phone: Press the multi-function key once shortly to answer call Answer calls----When connecting to two mobile phones: 1.If there is call on the second phone during the first phone is already in call, press the multi-function key once to answer the second phone, and end call on the first phone. 2.If there is call on the second phone during the first phone is already in call, press the multi-function key twice quickly to answer the second phone, and suspend but maintain call on the first phone. 3.Press function keys twice quickly to switch call between two phones. End the call While talking, press the multifunction key once to end the call. Voice Please confirm whether mobile phones support voice function, if support, then follow below steps to use voice function: 1.Press and hold the volume keys "+" or "-" for 3 seconds to activate voice function on phone. 2.Press and hold the volume keys again for 3 seconds to exit voice function on phone. Latest Number Redial Press multi-function key twice quickly. This feature requires music player software to support Music on /off When playing music, press the multi-function key to pause, and then press the multi-function key to play again. Next song While playing music, press and hold the volume "+" key for 2 seconds to switch to next song. Previous song While playing music, press and hold the volume "-" key for 2 seconds to switch to previous song. Volume adjustment Click the "+" key to increase volume and click the "-" key to reduce volume. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The dev ice can be used in portable exposure condition without restriction FCC ID: 2ALYI-H02
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Create Date : 2017:08:24 23:53:56+09:00 Creator : Adobe Illustrator CC 2014 (Windows) Modify Date : 2017:08:29 13:49:24+08:00 XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : H02说明书(简繁英) Metadata Date : 2017:08:29 13:49:24+08:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 256 Thumbnail Height : 136 Thumbnail Format : JPEG Thumbnail Image : (Binary data 17382 bytes, use -b option to extract) Instance ID : uuid:0fafa738-de73-4759-a9f4-4619069e6238 Document ID : xmp.did:ad830529-dfe7-2a44-ba68-b6740be86a39 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:12116c82-c5eb-42c8-825b-25f2cae4b398 Derived From Document ID : xmp.did:26c56ffd-24c5-e345-a5b9-396240cba441 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:26c56ffd-24c5-e345-a5b9-396240cba441, xmp.iid:ad830529-dfe7-2a44-ba68-b6740be86a39 History When : 2017:08:24 10:20:02+08:00, 2017:08:24 23:53:53+08:00 History Software Agent : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 71.998362 Max Page Size H : 75.998979 Max Page Size Unit : Millimeters Font Name : TimesNewRomanPSMT, AdobeSongStd-Light Font Family : Times New Roman, Adobe 宋体 Std Font Face : Regular, L Font Type : Open Type, Open Type Font Version : Version 5.20, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False Font File Name : times.ttf, AdobeSongStd-Light.otf Plate Names : Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Producer : Adobe PDF library 11.00 Page Count : 11 For : ȪˮȪ, Bounding Box : -83 -968 966 315 Container Version : 11 Creator Version : 16EXIF Metadata provided by EXIF.tools