Beijing TPCast Technologies TXOC1 PC Transmitter User Manual Manual Operation

Download:
Mirror Download [FCC.gov]
Document ID	3631196
Application ID	WFIUTfljjSFgkpVoz3CtRw==
Document Description	Manual Operation
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.93kB (824161 bits)
Date Submitted	2017-11-07 00:00:00
Date Available	2017-11-08 00:00:00
Creation Date	2017-10-18 17:10:43
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-10-18 17:45:00
Document Title	Manual Operation
Document Creator	Adobe InDesign CC 2017 (Macintosh)

CE-02H-UG-EN-001
User Guide on installation of
TPCAST Wireless Adaptor for
Oculus
CONTENTS
Installation of Software Client
What's in the box?
Instructions of main components
Connection instructions
Operation instructions
Instructions on setup of PC transmitter
Safety and note
Frequently asked questions
TPCAST Wireless Adaptor for Oculus and portable power bank
will get warm in the normal usage, if the partial temperature
reached 120 F, please stop using, in order to avoid burning people or
other hazards.
Because there is no cable effect, you should pay attention to
the safety of game area during using TPCAST Wireless Adaptor for
Oculus, to ensure that will not touch to the surrounding objects, or
take the experience under the care of others.
Please read the user guide prior to operating of the product. Update the
soft copy of user guide on a regular basis to improve the accuracy and
completeness. Please visit the website of www.tpcastvr.com to get the up-todate version.
TPCAST customer service: 18884662479
1. CLIENT SOFTWARE INSTALLATION
1. Download the software client
Visit the website of TPCAST which is www.tpcastvr.com and log in, browse the page of
TPCAST wireless adaptor for Oculus, click to download the connection assistant for Oculus.
The current version of client is compatible with Windows 7, Windows 8 or later version,
Windows 10.
w w w. t p c a s t v r. c o m / s u p p o r t - o c u l u s
Click here to download TPCAST wireless adapter
installation software version
2. Install the connection assistant software
1) Double click the icon to run the downloaded .exe file for installation. If already installed
any other versions of the client, please uninstall and restart the PC according to the prompt.
TPCAST Oculus Setup.exe
2) Following the system instructions, select the installation path and finish the client
installation. A shortcut icon of the connection assistant will be generated on the desktop.
2. WHAT'S IN THE BOX
5
A1
A2
B1
B2
14
①
②
③
④
⑤
⑥
⑦
10
HMD receiver
PC transmitter
Power box
Portable Power bank of 20100mAh
Dedicated cable for long distance connection
HDMI cable
Instructions and warranty card
1. HMD receiver
12
13
15
3. COMPONENTS DESCRIPTION
11
⑧ Nylon bag
⑨ Router
⑩ Router power supply
11 Network cable
12 Belt
13 PC transmitter Rod
14 PC transmitter Chassis
15 PC transmitter power supply
3
①
②
③
④
⑤
HMD strap and cable port
HDMI short connection port
Indicator for video signal connection
USB port
Video link pairing button
2. PC transmitter
①
②
③
④
⑤
2 3
HDMI connection port
DCIN power port
Video link pairing button
Port for fixing the platform
Indicator for video signal connection
3. Power Box
①
②
③
④
DCIN power port for dedicated long distance connection cable
USB port for dedicated long distance connection cable
Battery connector, USB port
Indicator light
4. Portable power bank
①
②
③
④
USB power output port
Micro USB charging port
Battery indicator button
Battery indicator
5. Router
① Network cable port
② Router power adaptor port
③ Status light for the router
6. Cable
Dedicated cable for long distance connection
A1
A2
B1
B2
7. HDMI cable
4. CONNECTION INSTRUCTIONS
1. PC transmitter connection instructions
Step one: Screw the support rod onto the chassis, and then screw the PC transmitter onto
the support rod.
Step two: Plug the PC transmitter power adaptor DC plug into the DCIN interface. Insert one
end of the HDMI cable into the PC transmitter's HDMI port and the other end into the PC's
HDMI port.
Step three: Adjust the location and angle of the PC transmitter to face the gaming area.
2.Connecting the HMD receiver
Step one: Referring to the angles shown in the illustration, remove the helmet's foam
bracket, unplug the cables, and take out from the head strap.
Step two: As shown in the illustration, thread the HMD strap through the tail end of the
helmet's receiver and out from the front end marked with the letters "TPCAST". Then, pass it
through the helmet's wire hole and secure it.
Step three: Insert the connectors of the dedicated long connection cable marked with
the Oculus logo into the interfaces on the helmet. Insert connectors A1 and A2 into the
corresponding interfaces on the helmet receiver.
Step four: Straighten out the cable and reattach the foam bracket. Adjust the strap length to
fit the user and ensure the cable connections are secure.
3. Power box connection instructions
Step one: As shown in the figure, insert connectors B1 and B2 of the dedicated long
connection cable into the power supply and HDMI ports on the power box respectively.
Step two: As shown in the figure, plug in the battery to the power box. The blue battery
light on the battery turns on to indicate the remaining level. To improve the utilization rate
of battery capacity, please only connect to the portable power bank before operation of the
product. After the operation, remove the portable power bank.
Step three: Put the installed battery and the power box in a portable pack and string the
pack to ensure the power box, does not fall during motion.
4. Router connection instructions
Step one: Connect the router power adaptor and confirm power indicator on the front of
panel is on.
Step two: Connect the yellow (LAN) port of router to the PC host through network cable, as
shown in the figure.
Step three: In PC’s network connection Settings of Windows system, select “Local connection”
to connect the router of wireless adaptor, change the connection of TCP/IP Settings to
automatically obtain IP address and DNS server address.
Note: Use the router as is, DO NOT modify the router’s settings.DO NOT restore the factory
default settings. To optimize the user experience, it is recommended to place the router in an
open location without obstacles, with a 90-degree antenna. Avoid putting the router under a
desk, behind a computer case, or in any other enclosure environment.
LAN Port
WAN Port
5. OPERATION INSTRUCTIONS
1. Connection verification
Verify that the TPCAST wireless adaptor connections are secure and tight including:
o The HMD receiver
o The PC transmitter
o The power box
o The portable power bank
o The router
Make sure that the battery is fully charged.
10
2. Set up PC transmitter
Set up the PC transmitter on the desktop and facing the game area, ensure there is no
obstruction between PC transmitter and HMD receiver
3. Run wireless adaptor connection assistant
Double-click the PC desktop client icon, then click “Start” after the client started. It will
automatically test the environment of wireless adaptor working in turn. When wireless
connection starts, please start Oculus home software.
4. Enjoy wireless VR
In normal operation of the wireless adaptor, the indicators of both transmitter and receiver
will change from fast blinking to normal light mode. The HMD display and control should
function normally.
6. SAFETY PRECAUTIONS
Safety: The TPCAST wireless adaptor for Head-Mounted Display (HMD) has no cable
attached, and it provides full motion and freedom. Please pay attention to security and safety
in the play area during gaming, and take care to not run into objects. Alternatively, you can
play under the supervision of another person.
Cable: To prevent damage to the cables it is suggested not to pull the cable to fetch the
devices. If there is a need to unplug the cables, pull lightly from the connector.
Heat rejection: The wireless adaptor generates heat during normal operation, and the
temperature may rise. If abnormal temperature occurs, stop activity immediately and contact
TPCAST customer support.
Battery safety: The portable power bank as included in the adaptor package is power supply
dedicated for this product, you must not replace with any non-TPCAST portable power bank,
and any PC transmitter damage caused accordingly will waive the warranty of the adaptor.
In order to mitigate the risk of fire hazard or combustion hazard, please do not disassemble,
squeeze the portable power bank and shall not expose the power supply to environment
exceeding 60℃ ,or toss into the fire or water.
11
Children use: Children are not allowed to use this product. Please keep this product in
appropriate locations beyond the reach of children, and do not grant access to children. If
elder children are allowed to use this product, please do proceed under the close watch of
adults.
Recharging: The battery can be recharged with a regular cellular phone charger, and a
charger of 2A is recommended to reduce the charging period. 9~12 hours will be needed to
complete a single full charge. A charger of the capacity of more than 2.4A shall not be used
for recharging.
Service and maintenance: The adaptor is non-waterproof; therefore, attention should be
paid to adequately protect it, including a blower, air duct, etc. should not be used to dry the
product in the case it gets wet as the product may get damaged.
•
•
•
•
•
•
Do not drop or disassemble the adaptor, as it can cause an electrical shock or fire.
Operate and maintain the product in an environment of 14 to 104 degrees Fahrenheit.
Use the product as directed only and do not connect to any incompatible products.
Refer to the local regulations on disposal of electronic waste for proper waste management.
Avoid inserting small objects into the products through the vent openings.
Do not clean this product with any irritating chemical, detergent, liquid soap or aerosol.
12
Status of indicator/lamp
Indicator
Location
Color
Status
Off
Video
signal
HMD
connection
receiver
Slow blinking
Green
Fast blinking
indicator
Video
signal
connection
PC
transmitter
Power
box lamp
Battery
charge
lamp
13
Power box
Portable
power bank
Off
Power off or system standby
Fast blinking
Blue
with the transmitter
Video in transmission
Slow blinking
Red
To be paired
Successfully paired
Normal light
Green
indicator
Description
Power off or system standby
To be paired
Successfully paired
with the transmitter
Normal light
Video in transmission
Off
Power off
Blinking/
System
normal light
in normal operation
Normal light
Each stands for 25% charge

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Language                        : zh-CN
Page Count                      : 14
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Create Date                     : 2017:10:18 17:10:43+08:00
Metadata Date                   : 2017:10:18 17:10:45+08:00
Modify Date                     : 2017:10:18 17:45:00+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:d79cbc1a-70b6-e744-86cc-748321fba84e
Original Document ID            : xmp.did:24772aac-e752-4c49-9add-858252ca3e6f
Document ID                     : xmp.id:355a2d58-bea1-40e8-9fdd-841adebc892c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:79d904da-25d6-4326-93fc-06db55735c07
Derived From Document ID        : xmp.did:79d904da-25d6-4326-93fc-06db55735c07
Derived From Original Document ID: xmp.did:24772aac-e752-4c49-9add-858252ca3e6f
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:10:18 17:10:43+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Creator                         : Adobe InDesign CC 2017 (Macintosh)

EXIF Metadata provided by EXIF.tools