Beijing TierTime Technology 3DP-12 UP Mini 2 User Manual part 1

Download:
Mirror Download [FCC.gov]
Document ID	3032620
Application ID	GqWK8tvel/IbJc9f9cx5nw==
Document Description	User manual part 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	284.64kB (3558005 bits)
Date Submitted	2016-06-19 00:00:00
Date Available	2016-06-19 00:00:00
Creation Date	2016-06-16 19:21:31
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2016-06-16 19:21:31
Document Title	UP mini2浜у搧璇存槑涔?1-54椤礯涓存椂淇敼鐗坃澶嶅埗
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

UP mini 2
User Manual
V 0.1
Index
Chapter 1 Product Description
Chapter 2 Prepare for Your First 3D Print
Chapter 3 Product Activation
Chapter 4 Machine Settings
Chapter 5 Print Settings
Chapter 6 Calibration and Other Options
Chapter 7 Techniques and Troubleshooting
Safety Precautions
1\
The UP mini 2 3D printer requires the power adapter provided by the original manufacturer,otherwise the machine could be damaged or even cause a fire hazard. Please also keep the power
adapter away from water and out of high temperature environments.
2\
During printing, the nozzle of the printer will
reach 260°C and the print platform could reach
over 70°C. Please do not touch these parts with
your bare hands while they are hot—not even with
the heat resistant gloves included with the
machine—as the temperature could damage the
gloves and injure your hands.
3\
During printing, the printhead and other
mechanical parts move at high speeds. Touching
these parts while they are moving could casue
injuries.
Warning label:
High Temperature, do
not touch!
Warning Label:
Moving parts, do not
touch!
4\
Please wear goggles when removing the supporting material from models and detaching
models from the perf board.
5\
When printing with ABS and PLA, the plastics will create a light odor. Please run the printer in a
well-ventilated environment. We also suggest you put the printer in an environment with a stable
temperature as unwanted cooling could cause adverse effects to the print quality.
When printer is exturding filament,make sure there is enough space between print head nozzle and
the platform. Otherwise the nozzle could be blocked.
Printing Environment
As light odor will be produced during printing, please run the printer in a well-ventilated environment.
The UP mini 2's ideal working temperature is between 15°C and 30°C with a relative humidity
between 20–50%.
Printing at temperatures out of this range could cause adverse effects to the printing process. When
using the “Extrude” function, keep at least 50mm be-tween the nozzle and the platform. If too close,
the nozzle may get blocked.
One Year Warranty
Beijing Tiertime Technology Limited (Tiertime) and its authorized resellers war- rants to the original
purchaser that this product is free from defects in material and workmanship.
Tiertime or its resellers will for one year, at its option, repair or replace at no charge for parts and labor
from the date you purchased the product from Tiertime or a reseller. Nozzles and Print Boards are
warranted for ninety (90) days.
• Tiertime reserves the right to determine the validity of all warrantyclaims.
• Warranty is void if the product serial number has been altered or removed.
• Warranty is void if the product has been misused or damaged or if evidence is present that the
product was altered, modified, or serviced by unauthorized service people.
Compliance
FCC
ROHS
CE
Unpacking
Package Content
UP mini 2
Spool and Toll Holder
Perforated Print Board
(Perf Board)
UP Flex Print
Board
Protective Gloves
Power Adapter
Power Cable
Scraper
USB Cable
Hex Keys
2.0mm, 2.5mm
Plier
ABS Filament
UP mini 2
User Manual
V 0.1
Nozzle Wrench
Micro SD and Reader
Print Head Nozzle
If anything is missing, please contact your local distributor or at support@pp3dp.com
Product Description
Front Side
Magnetic Top Lids
Back Door
Front Door
Handle
LCD Touch
Screen
Initialization
Button
Back Side
Filament Insertion Hole
Back Door
Power Switch
USB Connector
Power Supply Connector
Filament Spool Holder
Spool Hold Lid
Filament Guiding Tube
Filament
Filament Spool
Tool Drawer
Installation of Print Board
Slide print board into the
platform
Print Head Installation
Cooling Adjustment knob
Nozzle
Print Head Mount
Print Head Mounting
Plate
Slide the print head into the
slots.
Download and Install UP Software
Two ways to obtain UP software:
1\
2\
From the Micro SD card included in the package (using the mciroSD reader).
Download the latest version from www.up3d.com.
Double click the installation file, following simple instructions, the installa- tion will be finished swiftly.
Software Requirements
Software Interface
Printer Status
Other Options
Home
Load File
Print
Initialize
Calibrate
Maintenance
Build Platform
Model Adjustment Wheel
Mirror
Move
Scale
Rotate
To Menu 2
Auto Place
Undo
View Angles
Menu 1
Merge
Back to Menu 1
Save
Fix
Delete
Undo
Reset
Menu 2
Initialization of Printer
Initialization is required for every time the machine
is switched on. During initiali- zation, the print
head and print platform move slowly and hit the
endstops of the XYZ axes. This is essential as the
printer needs to find the endpoints of each axis.
The other software options will light up and
become available for use only after initiali- zation.
There are two ways to initialize
your printer:
The UP mini 2 can be initialized by clicking the
"Initialize" option in the software menu (shown
above). When the printer is idle, hold the initialization button on the printer. Press the initialization on touch screen.
Other functions of Initialization
Button:
Stop the current print job: During a print, press and
hold the button.
Reprint the last job: Double-click the but- ton.
Turn on/off internal lighting: Single-click the button.
Initialization
Button
Touch Screen Control
Change printing
Material
Print a stored project
Machine settings
including WIFI
Printer Info, reset to
factory and choose
language
Nozzle Height Detection
Initialize the printer
Nozzle Temperature
Platform Tem-perature
WIFI Status
Remaining
material
Private setting status
Printer readiness status
Prepare for Printing - Update Nozzle Height
The printed was calibrate before leaving the factory, but users are recommend to update
the nozzle height value use the automatic nozzle height detection function through the
touch before the first print.
Press Calibrate button to enter nozzle
height setting screen.
Press the “Nozzle Height Detection”
button to start the automatic process.
128
During nozzle height detection, the
print head nozzle will touch the thin
metal sheet on the detector to make
meas- urement.
Prepare for Printing - Load Filament
install the filament and guiding tube shown in red.
Back Side
Front
From spool
To printer
Filament Guiding Tube
insert into the filament
entrance.
Safety Precautions
1\
Insert the filament from the spool into guiding tube, arrange the guiding tube as shown in previous page. Press the Material button on the touch screen.
2\
1\
3\
2\
Choose the printing material as ABS by press the Wheel button to switch between different
mate- rials input the filament weight by using the +/- buttons.
3\ Click "Extrude." The print head will start to heat up, within five minutes. Its temperature will reach
260°C, then the printer will buzz and the print head will start to extrude.
Guiding Tube
4\ Gently insert the filament into the small
hole on the print head. The filament will be
fed into the print head automatically when
it reaches the extruder gear inside the print
head.
Filament
5\
Filament
Extrusion
6\
Check the nozzle for plastic extrusion. If plastic is
coming out from the nozzle, that means the filament is
loading correctly and the printer is ready for printing. (The
extrusion will stop automat- ically.)
Finally insert the guiding the tube in to
the filament entrance and press the tube
into the holding clip on the print head
mount.
Press the guiding tube
into the clamp
Guiding Tube
Loading a 3D Model
Load Model Button
Print a Model
Make sure printer is connected to computer throug USB or WIFI ( go to page xxx for details
about WIFI setting)and loaded a model.
Click print button to open
the print interface
Set Layer Thickness
Select Infill Type
Select Print Quality/Speed
Advanced Options
Shell: No infill,
normal wall.
Surface: No
top and bottom
layers, no infill,
single perimeter.
Hollow
Big Hole
Loose Fill
Solid Fill
When the UP software is slicing or sending data to the printer—progress dis- played on the
status bar on top of the software interface —do not unplug the USB cable as this will disrupt
the data transfer and result in a print failure. The USB cable can be unplugged after the data
transfer is finished.
Printing Progress
Print job progress
Pause print job
After pressing the pause button, the nozzle will be paused but temperature is maintained at
printing temper- ature. During pausing, the following control buttons will appear to allow
users to resume, stop or change fila- ment.
Please note the stopping is irreversible, the current print job can only be restarted from
begining.
Extrude
Resume
Stop Print Job
Retract
Change Filament During Printing
1\
During printing process the
“Pause” but- ton, the printing job will
be paused.
2\
When print head stopped
moving and platfrom lowered. Press
the “Retract” but- ton to remove
filament.
Press the “Extrude button” to load
the new filament
Press the “resume”
resume print- ing.
button
to
After filament was removed, insert new
filament to the print head as described in
page 16.
Print Job Finished
Printer ready confirmation:
Confirmation button
After the print job was finished, the user need
to press the “Ready for next print?” button to
confirm the printer is ready. User should make
sure the previous print job is removed from
the platform before pressing the button. The
printer cannot start a new print job if they did
not confirm the status.
Reprint or Printing Stored Print Jobs
Info of the stored file print job
Start Printing
Test001
Test002
Stored file name
Change Page
Machine Settings - WIFI Connection
or
Connecting to the UP mini 2 through WIFI requires a Wireless Local Area Net- work (WLAN).
Computer and printers must connect to the same WIFI network (same SSID) before able to
communicate.
In order to acheive stable WIFI connection, users are recommended to con- nect under a
capacious WIFI environment. A crowded network or an area with a large number different
networks are known to cause interruption during data trasnfer.
WIFI Setup through Touch Screen.
SSID Input
Input WIFI Password
Select WIFI
IP address
Private setting,
which add password for WIFI
connection.
Input Private Pass- word
Detectabe WIFI Network
WIFI connected
Flip Page
Select WIFI
Connect to
current WIFI
Refresh
Setup Private WIFI Access
If user switch on the private function in WIFI setting, a password field will appear to allow
passowrd setup. This is password that will be re- quired for WIFI connection to the printer
to prevent unathorized usage through WIFI. Please note this is a weak protection that
anyone who can access to the printer through USB or touch screen could changet the
private password.
WIFI Setup (UP Studio)
1\
3-1
Connect UP mini to computer through USB.
2\
At top right corner click the setting
button and then click WIFI tab.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2016:06:16 19:21:31+08:00
Create Date                     : 2016:06:16 19:21:31+08:00
Metadata Date                   : 2016:06:16 19:21:31+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : UP mini2浜у搧璇存槑涔?1-54椤礯涓存椂淇敼鐗坃澶嶅埗
Creator                         : Administrator
Document ID                     : uuid:34a6e13f-3557-412c-9103-a72e858dee82
Instance ID                     : uuid:8c075fbd-56dd-4a25-9ed2-e9db9f837ca2
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Page Count                      : 25
Author                          : Administrator

EXIF Metadata provided by EXIF.tools