Beijing TierTime Technology 3DP-25A UP BOX+ User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3056512
Application ID	B1sGiPZgbogpJkCtJiw3qg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	301.43kB (3767903 bits)
Date Submitted	2016-07-08 00:00:00
Date Available	2016-07-10 00:00:00
Creation Date	2015-01-14 11:07:05
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2016-07-06 18:06:56
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

version：4.6.23
Table of Contents
Precautions ....................................................................................................... 01
Printer Body illustration ................................................................................... 03
Accessories ....................................................................................................... 04
Remove Shipping Clips ..................................................................................... 05
Install UP software ............................................................................................ 06
Initialization of Printer ........................................................................................ 07
Platform Calibrate:
08
1.Setting Nozzle Height ................................................................................. 09
2.Setting Compensation Values .................................................................... 10
Coarse manul platform leveling ....................................................................... 12
Print A Model .................................................................................................... 14
Software Interface ............................................................................................ 15
Pause of Print Job ............................................................................................ 16
Moving Model ................................................................................................... 17
Rotate Model .................................................................................................... 18
Duplicate Model ............................................................................................... 19
Printing Parameters ......................................................................................... 20
Annotation of Printing Parameters ................................................................... 21
Repair Model .................................................................................................... 22
Calibration for the Correct Dimension ............................................................... 23
Printing Techniques .......................................................................................... 24
Troubleshooting ................................................................................................ 25
Appendix A ....................................................................................................... 26
Precautions
1. UP BOX 3D printer requires power adapter provided by original manufacturer.
Otherwise machine could be damaged or even cause fire hardzard. Please also
keep the power adapter away from water and high temperature.
2.During printing, the nozzle of the printer will reach 260oC and the print
platform could reach 100oC. Please do not touch these parts with bare hand
while they are hot, not even with the heat resistant gloves included with
machine as the temperature could damage the gloves and your hand.
Warning label on printer:
High Temperature, do not touch!
4.During Printing, the nozzle and print platform will move at high speed, do not
touch these parts while they are moving.
Warning label on printer:
Moving parts, do not touch!
5.Please wear goggles when removing the supporting material from models
and detaching models from perf board.
6.When printing ABS and PLA, slight smell will be produced, please run the
printer in a well ventilated environment. We also suggest you put the printer
in an enviroment with stable temperature, as unwanted cooling could cause
adverse effects on print quality.
7.When UP softwre is sending data to the printer, where the status bar on the
left bottom corner is showing "sending layers", do not unplug USB cable as
this will disrupt data transfer and resulted in printing failure. USB cable can be
unpluged after data transfer was finished.
8. UP BOX's working temperature is between15oC and 30oC relative humidity
20%-50%. It is recommended to discharge static charge from user's body
before touching the machine to prevent interruption of printing and potential
damage to the printer.
01
UP BOX Specification
Printing Technology
Build Volume
Print Head
Z-Resloution
Supporting Structure
Platform Leveling
Print Surface
Unterthered Printing
Average Operational Noise
Advanced Features
Bundled Software
Compatible File Formats
Connectivity
Operating System
Power adapter
Chassis
Printer Weight
Printer Dimiension
Weight with Packaging
Packaging Dimension
MEM (Melted Extrusion
Manufacturing)
255 x 205 x 205mm (W x H x D)
10" x 8" x 8"
Single, Modular for easy
replacement.
0.1/0.15/0.20 /0.25 /0.30 /0.35
/0.40 mm
Smart Support Technology:
automactically generated, easy to
remove, fine-tunable.
Fully automatic leveling with
integrated leveling probe.
Heated bed with ABS surface
Yes
51dB
Door Sensor, Air Filtration, FullColor LED Bar
UP Software
STL, UP3, UPP
USB
WinXP/Vista/7/8, Mac OS
110-240VAC, 50-60Hz, 220W
Plastic case with metal frame,
enclosed
20KG / 44 LB
489 x 495 x 520 mm(WxHxD)
19.5" x 19.5" x 20.5"
(W x H x D)
"x"x"
02
Printer Body
Top Lid
Front Door
Spool Holder
Filament Spool
Magnetic Cover
Pause/Stop Button
Extrude/Withdraw Button
Initialization Button
USB Interface
Power Interface
Power Switch
03
X-Axis
Z-Axis
Y-Axis
Air Filter
LED Bar
Print Platform
Print Head
Print Head Mount
Magnets
Nozzle
Automatic Leveling Probe
Metal Plate
04
Accessories
Power Adapter
Power Cable
Scraper
2.5mm Hex Keys
Plier
ABS Filament
CD-ROM
Perf Board
USB Cable
Nozzle Wrench
Print Head Nozzle
*If anything is missing please contact your local distributor or support@pp3dp.com
05
Remove Nylon Ties
Remove nylon ties from the horizontal smooth rods.
Install Perf Board
06
Install Filament
To install the filament spool, open the
magnetic cover and insert the filament
into the guiding tube at the spool
holder.
Push filament into the guiding tube
until it come out from the other end,
put the spool onto the cassette and
cover the spool with the magnetic
cover.
Install UP software
1.Go to support section of www.pp3dp.com to
download the latest version of UP Software.
2.D ouble click UP! Setup.exe to install the
software (default installation path C:\
Program files\UP ) a pop up window will
appear, select"install" and following the
instruction to finish. The printer's driver is
now installed into the system.
After installation,in the UP folder:
Driver folder contains the printer drivers.
Example the example folder contains STL files for the printed
parts of UP printers and example files.
07
UP
Testing of Printer Driver Installation
First make sure computer and printer is
connected to computer via USB cable and
the printer is switched on. The UP BOX
LED bar will light up in yellow.
UP
In Software main menu,
Click "3D Print".
If "Initialize" and "Maintenance"
options light up and avaliable for
selection this indicates the successful
installation of printer driver.
Initialization of printer
Initialization is required for everytime the machine is switched on. During initialization the
print head and print platform move slowly and hit the endstops of XYZ axes. This is essential
as the printer need to find the endpoints of each axis. Only after initialization, the other
software options will light up and become available for use.
Two ways of initialization:
1.UP BOX can be initialized by clicking initialization option in the menu which is shown
above.
2. When the printer is idle, long press the initialization button on the printer will also trigger
initialization
Initialization Button
The other functions of
Initialization Button:
1.Stop current print job: During printing
press and hold the button.
2.Reprint last job: Double click of the
button.
08
Automatic Platform Calibration
Platform calibration is the most important step for successfull printing, as it ensures the first
layer adhesion. Ideally, the distance between nozzle and platform is constant, but in reality
the distance varies at different positions due to many reasons (eg. slightly tilted platform) and
this could cause warping of prints or even complete failure. Fortunately UP BOX has automatic
platform calibration and automatic nozzle height detection functions. By using these 2 functions,
the calibration process could be finished quickly and easily.
In 3D Print menu, select Auto Level to
initiate auto leveling. The leveling probe will
be lowered and start to probe 9 positions on
the platform. After probing the platform,
the leveling data will be updated and stored
in the machine, leveling probe retracts
automatically.
Calibation Tips:
1. Do the calibrations when nozzle is not heated.
2. Remove residual plastic on the nozzle before calibration
3..A perf board should be fitted on platform during calibration.
09
Automatic Nozzle Height Detection
Choose "Nozzle Height Detect" in 3D Print menu.
The print head will move toward the nozzle height
detection device and the nozzle will eventually
touch and press the metal part on the device to
make the meausrement.
The detected nozzle height value wlll be stored in
the in the machine.
If consistent warping still occurs after auto-leveling, this may
due to severe unleveling of the platform which exceed the
capability of auto-leveling fucntion. In this case user should
do a coarse manual leveling before auto-leveling (see next
page).
User may also level the platform without using the autoleveling device and nozzle detection device. Please refer
Appendix A for details.
10
Coarse Manual Platform Leveling
Usually you do not need to adjust the
platform manually. This is only necessary
if automatic leveling were unable to
effectively level the platform.
There are 3 screws under the platform
of UP BOX. Two screws in front and
one screw under the platform at the
back. These screws can be fastened or
loosened to adjust the leveling of the
platform.
In "3D Print" - "Maintainance" window,
u s e r c a n m ove th e p ri nt he a d t o 5
difference postions on the platform. User
can also use "To" button to move the print
platform to a particular height.
First move print head to the center of the
platform and move the platform to almost
touching the nozzle (eg. nozzle height).
Use a piece of paper to determine the
correct platform height
Try to move the paper and feel the drag.
When one can feel the resistance from the
nozzle, base on the right side diagram.
Make sure you can feel similar drags at
all 5 positions by moving the print and
adjusting the screws while the platform
height is fixed.
Platform too high,
nozzle is pinning
paper onto the
platform, Lower the
platfrom slightly.
Other Options of the Maintenance Menu:
Just right,could feel
some resistance
when moving the
paper.
Platform too low,
no resistance at all
when moving paper,
raise the platform
slightly.
Withdraw: the printer heat up and withdraw filament from the print
head.
New Spool: to tell the software what is the current filament type, the
filament that used must match here.
Heat Table 1 hr: preheat table for 1 hour.
To Bottom: move the platform to the bottom.
Set Nozzle Height: set the current platform height as nozzle height.
11
Prepare for Printing
Make sure printer switched on
and connected to computer.
Select Main Menu - 3D Print Maintainance.
Click New Spool and choose ABS
and input filament weight.
Click "Extrude" button, the print
head will start to heat up, within
5 minutes its temperature will
reach 260 oC, then printer will
buzz and the print head start to
extrude.
Gently insert the fliament into
the small hole on the print head.
The filament will be feed into
the print head automatically
when it reach the extruder gear
inside the print head.
Check the nozzle for plastic
extrusion. If plastic is coming
out from the nozzle that means
filament loading correctly and
ready for printing.
( The extrusion will stop
automatically.)
12
Printer Control Buttons
Long Press
Double Click
Stop Printing Pause/Resume
Printing
Extrude
Withdraw
Filament
Filament
Initialize
Reprint last job
Printer
Single Click
Single click any
button will switch on
the internal lighting
for 3 minutes
LED Light Bar
Different color and behavoiur of the "UP BOX"
light bar indicate different status of printer.
Breathing: Printer switched on, uninitialized.
Breathing: Printer initialized, ready for printing.
Single Letter Rotation: Data transfer and printing
in progress.
Breathing: Paused.
Error. If a single letter is always on, it may
represent following errors:
U: Print Head Error
P: Motion System Error
B: Print Head Temp. Error
O: Build Platform/Chamber Temp. Error
X: SD Card Error
13
Software Interface
Quick functional Buttons
Main Menu
Status Bar
Display the statsu
of printer and
software.
Print Plate
-left mouse click and hold, moving
mouse to adjust camera angle.
-Right mouse click and hold, moving
mouse to move print plate.
-Mouse wheel could scale the print
plate view.
-T he print plate size depend on
the printer model connected to
computer.
10
11
1. Open: Load a model.
2. Save:Save the model into .UP3, a propritory 3D file format for UP printers.
3. Unload: Unload the selected model.
4. Print:Print the current print plate.
5. About:Display software version, printer model, firmware version and etc.
6. View Perspective: A variety of pre-set of perspective.
7. Adjustments:Move, Rotate, Scale.
8. Set the value of adjustments.
9. Set the orientation of adjustments.
10. Place:Place the model to the center of the print plate. If more than one model exist
software will optimize their positions and distances to each other.
11. Stop: If connected to printer, click this will stop the printing process. (cannot be
resumed)
14
Loading a Model
Click "Open"
Choose your model.
Loaded model on
the print plate.
Click "Print" to open
the print preview
window.
15
5
Click "OK" to start printing.
The program will process the
model and then transfer the data
to the printer.
Af te r sen di n g th e data , the
program will suggest the amount
of material and time needed for
the model in a pop up window.
At the same time, the nozzle will
start to heat up. The print job will
start automatically.
Annotation of Print Preview Interface:
a. Display the printer model.
b. Dispaly the noozle height.
c. Click to enter printer preference to set printing parameters.
d. If your model is not solid (defective), turn on this option.
e. No raft will be printed if this is turned on, print bed leveling will be disabled
as well.
f. Print Quality: the better the print quality the slower the print speed.
g.Set the pause height, the printer will pause at indicated heightness for
changing filaments.
h. Continuous heating of platform after printing, save heating time for
consective printing and preventing breakage due to rapid cooling in cold
weather.
When printer finished receiving the data, user could disconnect it
from computer for untethered printing.
16
Printing Progress
Printing progress is shown in the LED progress bar on top of the UP
BOX letters. The first two red LED represent printing of raft, the others
represent the rest of the model.
Pause of Print Job
During printing, the machine could
be paused through maintainence
interface.
When the printer is idle, there is a
"Table heat 1 hr" button under
"Stop All" button. Press this button
will keep platform heated for one
hour.
When the printer starts to
print, "Table heat 1 hr" button
will disappear. The button will
reappear after the printing of
raft is finished but the button
becomes "Pause Print" which
indicates pause function is now
available. Press this button the
printer will pause the print job and
the button will become "Resume
Print" for resuming the print job.
When the print job is paused, the
other buttons on the maintence
interface will become available.
User could change filaments using
"Withdraw" and "Extrude" buttons
or move the print head and print
platform with the location buttons
and the "To" button. User should
be aware not to crash the print
into the print head.
17
Pause of Print Job without using Software
During printing when the front door is opened, printing
will be paused automatically. After closing the front door
the print job will not be resumed until the user double click
the pause button.
Pause/Stop Button
Extrude/Withdraw Button
Alternatively, during Printing, double click the
Pause/Stop button, the print job will be paused. It
is possible to use the Extrude/Withdraw button to
change filament during pausing. Double click the
pause/stop button again to resume the print job.
18
Moving Model
Click the model to select.
Click Move button.
Select distance
value to in the drop
dwon menu.
Choose an axial
direction to move the
model.
Drag model with mouse on XY-plane: Press and hold Ctrl key, mouse
left click and hold the target model, now the model could be dragged
around on XY-plane.
Drag model with mouse on Z-axis: Press and hold Shift key, mouse left
click and hold the target model, now the model could be dragged along
the Z-axis.
Multiple models could be stacked. They can also be fused into single
model by "Merge" function in the "Edit" Menu.
19
Rotate Model
Click to select model.
Click Rotate button.
Choose angle of
rotation in the
drop dwon menu.
Choose an axial
direction to rotation
the model.
Scale Model
Click to select model.
Click Scale button.
Choose the scaling
value in the drop
down menu.
Click the Scale
button again to
scale.
20
Duplicate Model
Click to select model.
After selection, right
click to open menu
In the insert copy
m e n u, s e l e c t t h e
number of copy for
duplication.
Right click menu also contain unload function. Either choose
a specific model to unload or unload all.
21
Printing Parameters
Shell
No infill in
shell mode.
1. Z-resolution: Thickness of each printed layer,
the lower the value, the more
details will be generated.
2. Part:
Angle:Determine the range of dense
support generation.
Surface:Choose the how many layers will be
made for bottom of the model.
3. Support:
Dense: How many layers for dense
support generations.
Space: Set the density of of support
structure, the larger the value
the less dense of the supporting
structure.
Area: If the supporting area is less
than this value, no support will be
generated.(it is possible to turn off
support by choosing Only Base.)
4. Stable Support: Generate more stable
support but more difficult to
remove.
5. Infill: The photo shows the effects of 4
different infill options.
Surface
UP
The object
will be printed
without bottom
layers and top
layes. Only a
surface with
single layer
thickness will be
made.
22
UP
Annotation for printing parameters
Dense (support)
Infill
Dense (support)
Support
Surface
Dense (support)
Print Platform
Raft
Support Range:
< 80o
Suppot Range:
< 30o
Dense: S olid support structure ensure the surface being supported retain its
shape and surface finish.
Infill: The inner structure of the printed object, the density of infill could be
adjusted.
Raft: The thick structure that asist the adhesion of object to the platform.
Surface: The buttom layers of the printed object.
23
Repair Model
UP software contains model repair function, could be used to fix simple defects.
If the model contains
defective surfaces. The
sofware will highlight the
part with red.
After selecting the
model, choose Edit - Fix
to repair the model.
Repaired
If the model cannot be repaired, please use other 3D modeling or
mesh modifying tools.
24
Calibration for the Correct Dimension
If prints are too big or too small or skewed, user could re-calibrate the printer to
print in correct dimension. The method is to print a calibration model, measure
its dimension and feedback to the software.
Load and print the
calibration model:
C:\ProgramFiles\UP\
Example\Calibrate96.UP3
Open: 3D Print - Calibrate
This will open the calibration
panel.
Hit "Reset" button to
revert the value back to
default,make sure the
upper panel dispaly:
XY:0.00 Deg/XZ:0.00 Deg
Measure the printed
model accroding the
calibration panel.
Input the measured
values into the software
and finish the calibration.
25
Printing Techniques
1. Ensure accurate nozzle height. Nozzle height value too low will cause warping,
too high will crash nozzle to platform causing damage and clogging. It is possible to
manually fine tune nozzle height value at "maintenance" and "print preview" panels.
User could try to adjust the nozzle height value plus or minus 0.1 - 0.2mm base on
previous results.
2.Well calibrate the print platform. Unleveled platform usually cause warping.
3.Give enough time for sufficient pre-heating. Please use the "3D Print" - "Preheat".
A well preheated platform is essential for printing large objects without warping.
4.The air flow direction of the fan on the
print head is adjustable. There is a small
lever on the fan duct, when printing PLA turn
the lever anti-clockwisely to direct air flow to
nozzle, this will cool the PLA as soon as it
is extruded and improve print quality. When
printing large object using ABS, to minimize
warping, turn the lever clockwisely to direct
the air away from nozzle to slow down the
cooling. For smaller ABS prints that warping
is less likely to happen, user could direct the
air to nozzle for better print quality.
Air Flow Adjustment Knob
5.No raft printing. It is highly recommended
to use raft for normal printing as it improves
adhesion and is required for leveling
compensation, therefore it is turned on by
default. User could turn it off in the "Print
Preview" panel.
6.No support printing. It is possible to print
without supporting structures, user can turn
off support by choosing "Base Only" in Area
drop down menu of printing preference
panel.
26
Maintenance
Remove the nozzle.
After a long time of printing, the nozzle could become very dirty or even clogged. We can
replace it with a new one while the old one could be cleaned and reused.
Nozzle Wrench
1. Use "Withdraw" function in the maintenance panel, nozzle will heat up to printing
temperature.
2. Wear heat resistance gloves provided.
3. Wipe the nozzle with tissue or cotton.
4. Unscrew the nozzle using the wrench provided.
5.Remove the clog: there are many method such as drill through the clog using a 0.4mm
drill bit, submerge in acetone or using a heat gun to melt and blow away the clog.
Replace the Air Filter
Turn clockwise to install
the cap.
Filter Catridge
Turn anti-clockwise to
remove the cap.
27
Troubleshooting
Problems
Solution
1.Initialize the printer.
Printing or platform cannot
2.Heater catridge is broken, seek replacement.
reach target temp or over
heat.
3. Cable is broken, replace the cable.
1. Withdraw filament from print head, cut off the
melted tip and reload it to the print head.
2. Plastic clog the nozzle, replace new nozzle or remove
the clog.
Cannot extrude plastic
3.The filament is too thick. Usually happens when
using filament with poor quality. Please use UP Fila
filament.
4.For some model, if PLA consistently cause problem,
switch to ABS.
1. Install the printer driver correctly.
Cannot detect the printer
2. Check for defective USB cable.
3. Restart printer and Computer
Others
Contact technical support:
support@tiertime.net
28
Appendix A - Fine Manual Calibration
1. Setting nozzle height.
2. Setting compensation values.
Open: Menu - 3D Print - Platform Calibrate
A. Moving Platform UP/DOWN:
click/hold the button, platform
will move accordingly.
B. Display the current platform
height.
C.Setting nozzle height: click this
will set the current platform
height as the nozzle height.
D. 9 calibration point buttons,
represent 9 positions on platform,
after clicking them the nozzle
will move to the corresponding
positions. The drop down menu
beside the button is for setting
leveling compensation values.
1. Protocol for setting nozzle height:
1 Initialize printer
Put a print paper on the platform.
Open the calibration interface and
press the UP key, note the current
height value, stop the platform at
about 190.
29
4
Hit the "5" button. Nozzle will go
to the center of the platform.
Raise the platform until it is
just touching the nozzle. Move
the paper between the nozzle
and platform and see if there
5 is any resistance.
Platform too high, nozzle
is pinning paper onto
the platform, Lower the
platfrom slightly.
Just right, could feel
some resistance
when moving the
paper.
When obtained the right platform
height, write down the value of "current
height".
We will refer this as the "platform
height value".
Repeat step 1- 6 for all other 8
positions and obtain their platform
height values.
30
Platform too low, no
resistance at all when
moving paper, raise
the platform slightly.
7
Platform Values at 9 calibration points (hypothetical):
When obtained the platform height
value of all 9 positions. Find out the
smallest value among the 9 calibration
points.
As you can see in this case, the
calibration point 1 has the smallest
platform height value, it is actully the
highest point on the platform. Therefore
the platform does not need to rise as
high as the other points to reach the
nozzle
1: 208		
2: 208.5
3: 208.7
4: 208.6
5: 208.9
6: 209
7: 208.8
8: 208.9
9: 208.8
We set this mimimum platform height as
"Nozzle Height" since it is where the nozzle
first start to touch the platform. Now go to
calibration point 1 and rise platform to 208.
Click the button" Set Nozzle Height" to
finish.
2. Setting Compensation Values
As shown in the left, when platform is
at the "nozzle height", only part of the
platform is close enough to the nozzle.
Therefore we need to set compensation
values for all other calibration points to
inform the printer about the distance
between nozzle and print sur face
throughout the XY plane.
Afte setting the nozzle height, the drop down menu next to the
buttons will be available. A compensation value between 0 - 1.0 mm
will be available for selection.
To calculate compensation value:
Platform height - Nozzle Height = Compensation Value
31
For example, setting the
compensation value for calibration
point No.3. Assume the "platform
height" is 208.7 and the "nozzle
height" is 208, the compensation
value should be set to 0.7.
After setting 0.7 in the drop down
menu, the nozzle will move to point
No.3 and the platform will rise 0.7
mm. Now we can use the paper again
to verify the compensation value.
After setting all calibration points click
“Appy/Save Current Values ” to finish
the calibration.
32
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The distance between user and device should be no less than 20cm

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2015:01:14 11:07:05+08:00
Metadata Date                   : 2016:07:06 18:06:56+08:00
Modify Date                     : 2016:07:06 18:06:56+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:4afda89f-b679-4981-b709-840023fbac20
Original Document ID            : xmp.did:03AF5C200C2068118C14CCF8DD0853EA
Document ID                     : xmp.id:4A5CE39ADE9AE4119565C488BD4D5B83
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:495CE39ADE9AE4119565C488BD4D5B83
Derived From Document ID        : xmp.did:A660AE30D86EE41187D39430A5C1DEC6
Derived From Original Document ID: xmp.did:03AF5C200C2068118C14CCF8DD0853EA
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:01:14 11:07:05+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Has XFA                         : No
Page Count                      : 35
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools