Belkin F5D7050E Wireless G USB Adapter User Manual P74471 E F5D7050 man 11 05 indd
Belkin International, Inc. Wireless G USB Adapter P74471 E F5D7050 man 11 05 indd
Belkin >
Users Manual
�
�
�
�
User Manual
F5D7050
Connect your desktop or notebook
computer to a wireless network
Wireless G USB
Network Adapter
1 Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Benefits of a Home Network
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Advantages of a Wireless Network
. . . . . . . . . . . . . . . . . . . . . . . . .
1
Placement of your Wireless Networking Hardware
for
Placement of your Wireless Networking Hardware forPlacement of your Wireless Networking Hardware
Optimal Performance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2 Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Product Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Applications and Advantages
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Product Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
System Requirements
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Package Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
3 Installing and Setting up the
Adapter
. . . . . . . . . . . . . . . . . . . . . . . .
8
Step 1: Install
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Step 2:
Connect
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Step 3:
C
onfigure
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
0
4 Using the Belkin Wireless
Networking Utility
. . . . . . . . . . . . . . . .
12
Accessing the Belkin Wireless Networking Utility from the
Windows System Tray
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
Setting Wireless Network Profiles
. . . . . . . . . . . . . . . . . . . . . . . .
15
Securing your Wi-Fi Network
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
Configuring your Belkin Wireless G USB Network Adapter
to use Security
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
0
5 Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28
6 Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
Table of Contents
Introduction
section
1
2
3
4
5
6
Thank you for purchasing the Belkin Wireless G USB Network
Adapter (the Adapter). Now you can take advantage of this great
new technology and gain the freedom to network your home and
office computers wirelessly. This Adapter allows you to connect a
desktop or notebook computer to your network. The easy installation
and setup will have you networking wirelessly in minutes. Please
be sure to read through this User Manual completely, and pay
special attention to the section entitled “Placement of your Wireless
Networking Hardware for Optimal Performance” on page 2.
Benefits of a Home Network
Your Belkin Home Network will allow you to:
• Share one high-speed Internet connection with all the computers in
your home
• Share resources, such as files, and hard drives among all the
connected computers in your home
• Share a single printer with the entire family
• Share documents, music, video, and digital pictures
• Store, retrieve, and copy files from one computer to another
• Simultaneously play games online, check Internet email, and chat
Advantages of a Wireless Network
Here are some of the advantages of setting up a Belkin wireless network:
•
Mobility
– you no longer need a dedicated “computer
room”—you can work on a networked laptop or desktop
computer anywhere within your wireless range
•
Easy installation
– Belkin Easy Installation Wizards make
setup simple
•
Flexibility
– set up and access printers, computers, and other
networking devices from anywhere in your home
•
Easy expansion
– the wide range of Belkin networking products
lets you expand your network to include devices such as printers
and gaming consoles
•
No cabling required
– you can spare the expense and hassle of
retrofitting Ethernet cabling throughout the home or office
•
Widespread industry acceptance
– choose from a wide range
of interoperable networking products
1
2
Introduction
Introduction
Placement of your Wireless Networking Hardware for
Optimal Performance
Your wireless connection will be stronger the closer your computer
is to your
wireless router (or access point)
. Typical indoor operating
range for your wireless devices is between 100 and 200 feet. In the
same way, your wireless connection and performance will degrade
somewhat as the distance between your
wireless router (or access
point)
and connected devices increases. This may or may not be
noticeable to you. As you move farther from your
wireless router (or
access point)
, connection speed may decrease. Factors that can
weaken signals simply by getting in the way of your network’s radio
waves are metal appliances or obstructions, and walls.
If you have concerns about your network’s performance that might be
related to range or obstruction factors, try moving the computer to a
position between five and 10 feet from the
wireless router (or access
point)
in order to see if distance is the problem. If difficulties persist
even at close range, please contact Belkin Technical Support.
Note:
While some of the items listed below can affect network
performance, they will not prohibit your wireless network from
functioning; if you are concerned that your network is not operating
at its maximum effectiveness, this checklist may help.
1. Placement of your Wireless Router or (Access Point)
Place your
wireless router (or access point)
, the central connection
point of your network, as close as possible to the center of your
wireless network devices.
To achieve the best wireless network coverage for your “wireless
clients,” (i.e. computers enabled by Belkin Wireless Notebook
Network Cards, Wireless Desktop Network Cards, and Wireless
USB Adapters):
• Ensure that your
wireless router’s (or access point’s)
antennas
are parallel to each other, and are positioned vertically (toward
the ceiling). If your
wireless router (or access point)
itself is
positioned vertically, point the antennas as much as possible in
an upward direction.
•
In multistory homes, place the
wireless router (or access point)
on a
floor that is as close to the center of the home as possible. This may
mean placing the
wireless router (or access point)
on an upper floor.
• Try not to place the
wireless router (or access point)
near a
cordless 2.4GHz phone.
Introduction
Introduction
3
Introduction
section
1
2
3
4
5
6
2.
Avoid Obstacles and Interference
Avoid placing your wireless router (or access point) near devices that
may emit radio “noise”, such as microwave ovens. Other objects that
can inhibit wireless communication can include:
• Refrigerators
• Washers and/or dryers
• Metal cabinets
• Large aquariums
• Metallic-based, UV-tinted windows
If your wireless signal seems weak in some spots, make sure that
objects such as these are not blocking the signal’s path between your
computers and wireless router (or access point).
3. Cordless Phone Placement
If the performance of your wireless network is impaired after
attending to the above issues, and you have a cordless phone:
• Try moving cordless phones away from the
wireless router
(or access point)
and your wireless-enabled computers.
• Unplug and remove the battery from any cordless phone
that operates on the 2.4GHz band (check the manufacturer’s
information). If this fixes the problem, the phone may
be interfering.
• If your phone supports channel selection, change the
channel on the phone to the farthest channel from your
wireless network as possible. For example, change the
phone to channel 1 and move your
wireless router (or
access point)
to channel 11. (Your channel selection will
vary depending on your region.) See your phone’s user
manual for detailed instructions.
• If necessary, consider switching to a 900MHz or 5GHz
cordless phone.
4
4
.
Choose the “Quietest” Channel for your Wireless Network
In locations where homes or offices are close together, such as apartment
buildings or office complexes, there may be wireless networks
nearby
that can conflict with yours. Use the Site Survey capabilities of your
Wireless Networking Utility to locate any other wireless networks,
and move your wireless router (or access point) and computers to a
channel as far away from other networks as possible.
Experiment with more than one of the available channels in order to
find the clearest connection and avoid interference from neighboring
cordless phones or other wireless devices.
For more Belkin wireless netwo
rking products, use the detailed
site
survey and wireless channel information included in your User Manual.
5. Secure Connections, VPNs, and AOL
Secure connections typically require a user name and password, and
are used where security is important. Secure connections include:
• Virtual Private Network (VPN) connections, often used to connect
remotely to an office network
• The “Bring Your Own Access” program from America Online
(AOL), which lets you use AOL through broadband provided by
another cable or DSL service
• Most online banking websites
• Many commercial websites that require a user name and
password to access your account
Secure connections can be interrupted by a computer’s power
management setting, which causes it to “go to sleep.” The simplest
solution to avoid this is to simply reconnect by re-running the VPN or
AOL software, or by re-logging into the secure website.
A second alternative is to change your computer’s power management
settings so it does not go to sleep; however, this may not be appropriate
for portable computers. To change your power management setting in
Windows, see the “Power Options” item in the Control Panel.
If you continue to have difficulty with Secure Connections, VPNs, and
AOL, please review steps 1-4 in the previous pages to be sure you
have addressed these issues.
These guidelines should allow you to cover the maximum possible area
with your wireless router. Should you need to cover an even wider
area, we suggest the Belkin Wireless Range Extender/Access Point.
For more information regarding our networking products, visit our
website at www.belkin.com/networking or call Belkin Technical Support.
Introduction
5
section
1
2
3
4
5
6
Introduction
Product Features
The Adapter complies with the IEEE 802.11g standard in order to
communicate with other 802.11g-compliant wireless devices at
54Mbps. The Adapter is compatible with all 802.11g devices as well
as other 802.11b products at 11Mbps. 802.11g products operate on
the same 2.4GHz frequency band as 802.11b Wi-Fi
®
products.
• 2.4GHz ISM (Industrial, Science, and Medical) band operation
•
Integrated easy-to-use Wireless Networking Utility
• USB 2.0 interface, for operation in virtually any desktop or
notebook computer
• WPA,
WPA2,
64-bit WEP (Wired Equivalent Privacy), or
128-bit encryption
• Wireless access to networked resources
• Support for both Infrastructure and Ad-Hoc (peer-to-peer)
networking modes
• Easy installation and use
•
LED power and
n
etwork link
Overview
6
Applications and Advantages
•
Wireless roaming with a laptop around the home or office
Offers the freedom of networking—without cables
•
Connection rates of up to 54Mbps
Provides immediate wireless connectivity at home, work, and
hotspot locations without compromising the use of existing
802.11b and 802.11g products
•
Compatibility with 802.11b products
802.11g wireless LAN solutions are backward-compatible with
existing Wi-Fi (IEEE 802.11b) products and with other products
that display the 54g logo
•
Difficult-to-wire environments
Enables networking in buildings with solid or finished walls, or
open areas where wiring is difficult to install
•
Frequently changing environments
Adapts easily in offices or environments that frequently rearrange
or change locations
•
Temporary LANs for special projects or peak time
Sets up temporary networks such as at trade shows, exhibitions,
and construction sites, which need networks on a short-term
basis; also companies who need additional workstations for a
peak activity period
•
SOHO (Small Office/Home Office) networking needs
Provide
s the easy and quick, small network installation SOHO
users need
Product Specifications
Host Interface: USB 2.0 interface
Power Consumption: Tx/Rx peak 510/250mA @ 3.3VDC (max.)
Operating Temperature: 32—140 degrees F (0—60 degrees C)
Storage Temperature: -4—176 degrees F (-20—80 degrees C)
Humidity: Max. 90% (non-condensing)
Typical Operating Range: 100–200 ft.* (30—60m) indoors
*
Wireless performance may vary
Overview
7
section
1
2
3
4
5
6
(a)
Protective Cap
(b)
(b)
Activity LED
(d)
Desktop Adapter Base
(Optional
(Optional
U
se)
(c)
USB Adapter
(a) Protective Cap
(b) Activity LED
Lights up and flashes when the Adapter is active
Blinking Green:
Active
Off:
Not connected to network
On:
Connected to network
(c)
USB Adapter
Fits securely into your computer’s USB slot or into the Desktop Adapter
Base (included).
(d) Desktop Adapter Base
Lets you extend the USB Adapter away from interfering objects around
your computer.
The cap can be stored on the
opposite end of the USB connector.
Overview
The cap snaps over the USB
connector for protection.
System Requirements
• PC-compatible desktop computer
with one available USB slot and
CD-ROM drive
• Windows
®
98SE, 2000,
Me, or
XP
Package Contents
•
Wireless G USB Network Adapter
•
Desktop Adapter Base
• Quick Installation Guide
• Installation Software CD
• User Manual
Installing and Setting up the Card
8
8
For users of Windows Vista, refer to the following installation steps:
Step 1A Install
IMPORTANT: INSTALL THE SOFTWARE BEFORE INSERTING THE CARD.
1A.1 Insert the Installation Software CD into your CD-ROM drive.
1A.2 Select the “Run Installer.exe” option.
1A.3 You may see a window titled, “An unidentified program wants
access to your computer”. Click “Allow”.
1A.4 Click “Next” to begin the installation process.
9
Installing and Setting up the Card
section
9
1
2
3
4
5
6
1A.5 You may see a window titled,
“Windows can’t verify the publisher
of this driver software”. This is
normal and does not indicate a
problem. Our software has been
fully tested and is compatible with
this operating system.
1A.6 When prompted, plug in
your Card.
1A.7 When the installation
completes, click “Finish”. Your
installation is now complete.
1A.8 To connect to the Internet,
open the Network and
Sharing Center by first
opening the Control Panel
from the “Start” menu.
1A.9 In the Control Panel, click
on “View network status
and tasks”.
Installing and Setting up the Card
10
10
1A.10 In the Network and Sharing
Center, click on “Connect to
a network”.
1A.11 Select an available wireless
network and click “Connect”.
1A.12 Your Card will attempt to connect
to the selected network.
1A.13 Depending on the security
settings of your wireless network,
you may be prompted to enter
in a network security key or a
passphrase. Click “Connect” after
you have done so.
11
Installing and Setting up the Card
section
11
1
2
3
4
5
6
1A.15 The Network and Sharing Center
should now show the network
connection that you have just
made. The links on the left of the
window allow you to configure
your network connections.
1A.14 After connecting to the
network, you may choose to
save this network and connect
automatically once your Card is
in range.
Installing and Setting up the Adapter
Important Note:
Install the software before inserting the Card.
1.1
Insert the Installation Software CD into your CD-ROM drive.
1.2
The Belkin Wireless Networking Utility screen will automatically
appear (may take 15–20 seconds to appear).
Note:
If the Belkin Wireless Networking Utility screen does not appear
within 20 seconds, access your CD-ROM by double-clicking on the “My
Computer” icon; then, double-click on the CD-ROM drive into which the
installation CD has been placed. Double-click on the folder named “Files”,
then double-click on the icon named “setup.exe”.
Step 1 Install
1.3
Click “install” from the menu.
For users of other Windows operating systems, refer to the installation
instrucions below.
Step 1B
12
12
Installing and Setting up the Adapter
section
1
2
3
4
5
6
Step 2 Connect
Plug the Adapter into an Available USB Slot on your Notebook Computer
2.1
During the install process,
you will be prompted to insert
your Adapter. Plug the Adapter
into an available USB port on
your computer and follow the
on-screen instructions.
Note:
If your system did not
prompt you to insert your Adapter
after the installation is completed,
please do so now.
2.2
Belkin Wireless Networking Utility
installation is now complete. Click
“Finish” to close the Wizard.
Step 2 Connect
13
Installing and Setting up the Adapter
Installing and Setting up the Adapter
Step 3 Configure
Use the Belkin Wireless Networking Utility
3.1
After successfully installing the
Adapter, double-click the Belkin
Wireless Networking Utility icon
located on the desktop screen.
3.2
The Wireless Networking Utility
screen will appear. Select a
network to connect to by selecting
a network from the “Available
Networks” list. Then, click
“Connect”.
Note:
In order to see your available
networks, you must be near a working
wireless router or access point.
Step 3 Configure
141414
14
Installing and Setting up the Adapter
section
1
2
3
4
5
6
3.3
The Belkin Wireless Networking
Utility icon can also be found on
the system tray.
Note:
Double-clicking on the
Belkin Wireless Networking Utility
icon on the system tray will bring
up the “Utility” screen.
Installation is now complete.
15
Using the Belkin Wireless Networking Utility
After successfully installing the Belkin Wireless Networking Utility
(WNU),
configurations for wireless connection and security are just a
few easy clicks away.
Accessing the Belkin Wireless Networking Utility
from the Windows System Tray
To access the WNU, simply place your mouse pointer and right-click
over the WNU icon on the Windows system tray on the lower right-hand
corner of your computer’s desktop.
If the icon is not present, click on “Start > Programs > Belkin >
Wireless Networking Utility”.
16
Using the Belkin Wireless Networking Utility
section
1
2
3
4
5
6
The WNU’s default screen is the “Current Status” tab. The “Current
Status” tab displays the current network status and available networks.
Network Status
This window displays the connectivity status of the current network,
between the computer and router, and between the router and the
Internet. In the event of a problem, use the “Network Status” window
to determine the source (e.g., computer, router, or Internet/modem).
Available Networks
This window displays the available networks at the current
location as well as their SSID, Signal Strength, Security Type,
Channel, and Network Type.
Lost Wireless Connection
If the current wireless connection is lost, a window will pop up and the
WNU will attempt to reconnect.
17
Using the Belkin Wireless Networking Utility
Using the Belkin Wireless Networking Utility
Connection Failure
Other options will appear during attempts to reconnect. To stop
connecting, click “Stop” and to reattempt connection, click “Retry”.
Network Status and Solution Tips
To further understand the current Network Status, click “Open Wireless
Utility”. The default screen will be the “Current Status” tab and the “Network
Status” section determines which connections are good and/or faulty.
18
Using the Belkin Wireless Networking Utility
1
2
3
4
5
6
section
The WNU also features a “Solution Tips” section that provides
troubleshooting guidelines.
Setting Wireless Network Profiles
The “My Connections” tab on the WNU allows you to add, edit, and delete
connection profiles. It also displays signal strength, security, and network type.
Securing your Wi-Fi
®
Network
If you choose to connect to a secure network, determine the type of
security (WPA or WEP*) and use the appropriate field in the dialog box.
*Note:
Types of s
ecurity
19
Using the Belkin Wireless Networking Utility
Using the Belkin Wireless Networking Utility
Note:
When you select a network using encryption, you will first see
the simple security screen.
Click the “Advanced” button to see other
security options (below).
20
Using the Belkin Wireless Networking Utility
1
2
3
4
5
6
section
Wired Equivalent Privacy (WEP)
is a less secure, but more
widely adopted wireless security protocol. Depending on the security
level (64- or 128-bit), the user will be asked to input a 10- or 26-
character hex key. A hex key is a combination of letters, a–f, and
numbers, 0–9.
Wireless Protected Access (WPA)
is the new standard in
the wireless security. However, not all wireless cards and adapters
support this technology. Please check your wireless adapter’s user
manual to check if it supports WPA. Instead of a hex key, WPA uses
only passphrases, which are much easier to remember.
The following section, intended for the home, home office, and small
office user, presents a few different ways to maximize the security of
your wireless network.
At the time of publication, four encryption methods are available:
Encryption Methods:
Name
64-bit Wired
Equivalent
Privacy
128-Bit Wired
Equivalent
Privacy
Wi-Fi
Protected
Access-TKIP
Wi-Fi Protected
Access 2
Acronym
64-bit WEP
128-bit WEP
WPA-TKIP/
AES (or just
WPA)
WPA)
WPA2-AES (or
just WPA2)
Security
Good
Better
Best
Best
Features
Static keys
Static keys
Dynamic key
encryption
and mutual
authentication
Dynamic key
encryption
and mutual
authentication
Encryption
keys based on
RC4 algorithm
(typically 40-bit
keys)
More secure than
64-bit WEP using
a key length of
104 bits plus
24 additional
bits of system-
generated data
TKIP
(Temporal
Key Integrity
Protocol)
added so
that keys are
rotated and
encryption is
strengthened
AES (Advanced
Encryption
Standard) does
not cause any
throughput loss
Wired Equivalent Privacy (
WEP
)
WEP
is a common protocol that adds security to all Wi-Fi-compliant
wireless products. WEP gives wireless networks the equivalent level
of privacy protection as a comparable wired network.
2121
21
Using the Belkin Wireless Networking Utility
Using the Belkin Wireless Networking Utility
64-Bit WEP
64-bit WEP was first introduced with 64-bit encryption, which includes
a key length of 40 bits plus 24 additional bits of system-generated
data (64 bits total). Some hardware manufacturers refer to 64-bit
as 40-bit encryption. Shortly after the technology was introduced,
researchers found that 64-bit encryption was too easy to decode.
128-Bit Encryption
As a result of 64-bit WEP’s potential security weaknesses, a more
secure method of 128-bit encryption was developed. 128-bit
encryption includes a key length of 104 bits plus 24 additional
bits of system-generated data (128 bits total). Some hardware
manufacturers refer to 128-bit as 104-bit encryption.
Most of the new wireless equipment in the market today supports
both 64-bit and 128-bit WEP encryption, but you might have
older equipment that only supports 64-bit WEP. All Belkin
wireless products will support both 64-bit and 128-bit WEP.
Encryption Keys
After selecting either the 64-bit or 128-bit
WEP
encryption mode, it is
critical that you generate an encryption key. If the encryption key is
not consistent throughout the entire wireless network, your wireless
networking devices will be unable to communicate with one another.
You can enter your key by typing in the hex key manually, or you can
type a passphrase into the “Passphrase” field and click “Generate”
to create a key. A hex (hexadecimal) key is a combination of numbers
and letters from A–F and 0–9. For 64-bit WEP, you need to enter 10
hex keys. For 128-bit WEP, you need to enter 26 hex keys.
For instance:
AF
0F
4B
C3
D4
= 64-bit WEP key
C3
03
0F
AF
0F
4B
B2
C3
D4
4B
C3
D4
E7
= 128-bit
WEP
key
The WEP passphrase is NOT the same as a WEP key. Your Adapter
uses this passphrase to generate your WEP keys, but different
hardware manufacturers might have different methods on generating
the keys. If you have multiple vendors’ equipment in your network,
the easiest thing to do is to use the hex WEP key from your wireless
router (or access point) and enter it manually into the hex WEP key
table in your Adapter’s configuration screen.
22
Using the Belkin Wireless Networking Utility
1
2
3
4
5
6
section
Wi-Fi Protected Access (
WPA)
WPA
is a new Wi-Fi standard that improves upon the security features
of WEP. To use WPA security, the drivers and software of your wireless
equipment must be upgraded to support it. These updates will be found
on your wireless vendor’s website. There are three types of WPA security:
WPA-PSK (no server), WPA (with radius server), and WPA2.
WPA-PSK (no server)
uses what is known as a pre-shared key as the
network key. A network key is a password that is between eight and
63 characters long. It can be a combination of letters, numbers, or
characters. Each client uses the same network key to access the network.
Typically, this is the mode that will be used in a home environment.
WPA (with radius server)
is a system where a radius server
distributes the network key to the clients automatically. This is
typically found in a business environment.
WPA2
requires Advanced Encryption Standard (AES) for encryption
of data, which offers much greater security than WPA. WPA uses both
Temporal Key Integrity Protocol (TKIP) and (AES) for encryption.
For a list of Belkin wireless products that support WPA, please
visit our website at
www.belkin.com/networking
.
Most Wi-Fi products ship with security turned off. So once you have
your network working, you need to activate WEP or WPA and make
sure all your wireless devices are sharing the same network key.
The following diagram shows the effect of not having the correct
network key throughout your network.
The Card cannot access the network because it uses a different network key than the one
configured on the wireless router.
IMPORTANT:
You must now set all wireless network cards/adapters
to match these settings.
Wireless G Router
Wireless G
Notebook Card
Wireless G
Desktop Card
Wireless G
Desktop Card
Network key=
WRONG Password
Network key=
MyPassword
Network key=
MyPassword
Network key=
MyPassword
23
Using the Belkin Wireless Networking Utility
Using the Belkin Wireless Networking Utility
Configuring your Belkin Wireless G USB Network
Adapter to use Security
At this point, you should already have your wireless router (or access
point) set to use WPA or WEP. In order for you to gain a wireless
connection, you will need to set your Wireless G USB Network
Adapter to use the same security settings.
Changing the Wireless Security Settings
The Belkin Wireless G USB Network Adapter supports the latest WPA
security feature as well as the legacy WEP security standard. By
default, wireless security is disabled.
To enable security, you will first need to determine which standard is
used by the router or access point. (See your wireless router’s or access
point’s manual for directions on how to access the security settings.)
To access the security settings on your Adapter, click the “My
Connections” tab and point to the connection for which you want to
change security settings. Click “Edit” to change settings.
24
Using the Belkin Wireless Networking Utility
1
2
3
4
5
6
section
WEP Setup
64-Bit WEP Encryption
1.
Select “WEP” from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your key
by typing in the hex key manually, or you can type in a passphrase
in the “Passphrase” field and click “Generate” to create a key.
A hex (hexadecimal) key is a combination of numbers and letters from
A–F and 0–9. For 64-bit WEP, you need to enter 10 hex keys.
For instance:
AF
0F
4B
C3
D4
= 64-bit WEP key
25252525
25
Using the Belkin Wireless Networking Utility
Using the Belkin Wireless Networking Utility
3.
Click “Save” to finish. Encryption in the wireless router (or
access point) is now set. Each of your computers on your
wireless network will now need to be configured with the same
security settings.
WARNING:
If you are using a wireless client to turn on the security
settings in your wireless router (or access point), you will temporarily
lose your wireless connection until you activate security on your
wireless client
. Please record the key prior to applying changes in the
wireless router (or access point). If you don’t remember the hex key,
your client will be locked out of the wireless router (or access point).
128-Bit WEP Encryption
1.
Select “WEP” from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your
key manually by typing in the hex key manually, or you can type
in a passphrase in the “Passphrase” field and click “Generate” to
create a key.
A hex (hexadecimal) key is a combination of numbers and letters from
A–F and 0–9. For 128-bit WEP, you need to enter 26 hex
keys
.
For instance:
C3
03
0F
AF
0F
4B
B2
C3
D4
4B
C3
D4
E7
= 128-bit WEP key
26
Using the Belkin Wireless Networking Utility
1
2
3
4
5
6
section
3.
Click “Save” to finish. Encryption in the wireless router
(or access
point)
is now set. Each of the computers on your wireless network
will now need to be configured with the same security settings.
WARNING:
If you are using a wireless client to turn on the security
settings in your wireless router (or access point), you will temporarily
lose your wireless connection until you activate security on your
wireless client. Please record the key prior to applying changes in the
wireless router (or access point). If you don’t remember the hex key,
your client will be locked out of the wireless router (or access point).
27
Using the Belkin Wireless Networking Utility
Using the Belkin Wireless Networking Utility
WPA-PSK (no server)
Choose this setting if your network does not use a radius server. WPA-PSK
(no server) is typically used in home and small office networking.
1.
From the “Network Authentication” drop-down menu, select
“WPA-PSK (no server)”.
2.
Enter your network key. This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must be
used on all of the clients (network cards) that you want to include
in your network.
28
Using the Belkin Wireless Networking Utility
1
2
3
4
5
6
section
3.
Click “Save” to finish. You must now set all clients (network
cards) to match these settings.
Wireless Networking Utility Options
The “Options” tab on the WNU provides the user the ability to
customize his or her WNU settings.
29
Using the Belkin Wireless Networking Utility
Using the Belkin Wireless Networking Utility
Advanced Diagnostic Tools
The “Advanced Diagnostic Tools” section is the central control panel
for all the settings of the hardware and software components of
the wireless network. It provides an array of tests and connectivity
services to ensure optimal network performance.
Wireless Networking Utility
Help
The WNU “Help” tab provides users with access to online and
telephone support, as well as advanced diagnostic tools.
30
Using the Belkin Wireless Networking Utility
1
2
3
4
5
6
section
31
Troubleshooting
I can’t connect
to the Internet wirelessly.
If yo
u are unable to connect to the Internet from a wireless computer,
please check the following items:
1.
Look at the lights on your wireless router. If you’re using a Belkin
Wireless Router, the lights should be as follows:
• The “Power” light should be on.
• The “Connected” light should be on, and not blinking.
• The “WAN” light should be either on or blinking.
If your Belkin Wireless Router’s lights match these descriptions, go to
number
2
, below.
If this is
NOT
the case, please contact Belkin technical support.
If you are not using a Belkin Wireless Router, consult that router
manufacturer’s user guide.
2.
Open your Wireless Networking Utility software by clicking on the
icon
in the system tray at the bottom right-hand corner of the screen
:
the tray icon should look like this (the icon may be red or green):
3.
The window that opens will show a list of “Available Networks”.
Available networks are wireless networks you can connect to.
If you are using a Belkin 802.11g (54g) Router, “Belkin54g” is the
default name.
If you are using a Belkin 802.11b Router, the default name should be
“WLAN”.
If you are NOT using a Belkin Router, please consult your router
manufacturer’s user manual for the default name.
32
Troubleshooting
section
1
2
3
4
5
6
The name of your wireless network appears in
“Available Networks”.
If the correct network name is listed in the “Available Networks”
list, please follow the steps below to connect wirelessly:
1.
Click on the correct network name in the “Available Networks” list.
2.
If the network has security (encryption) enabled, you will need
to enter the network key. For more information regarding
security, please see “Securing your Wi-Fi
Network” on page 15
of this manual.
3.
Within a few seconds, the tray icon in the lower right-hand
corner of your screen should turn green, indicating a successful
connection to the network.
If you are still unable to access the Internet after connecting to
the wireless network, please contact Belkin Technical Support.
The name of your wireless network DOES NOT appear in the list
of “Available Networks”.
If the correct network name is not listed under “Available
Networks” in the Wireless Networking Utility, please attempt the
following troubleshooting steps:
1.
Temporarily move computer, if possible, to five to 10 feet away
from the Wireless Router (or Access Point). Close the Wireless
Networking
Utility, and reopen it. If the correct network name
now appears under “Available Networks”, you may have a
range or interference problem. Please see the suggestions
listed in the “Placement of your Wireless Networking Hardware
for Optimal Performance” section on page 2.
2.
Using a computer that is connected to the Wireless Router (or
Access Point) via a network cable (as opposed to wirelessly),
ensure that “Broadcast SSID” is enabled. This setting is found
on the Router’s wireless “Channel and SSID” configuration
page. For detailed instructions on accessing this page and
changing settings, please see your Wireless Router’s (or
Access Point’s) User Manual.
If you are still unable to access the Internet after completing
these steps, please contact Belkin Technical Support.
33
Troubleshooting
Installation CD-ROM does not start Wireless
Networking Utility.
If the CD-ROM does not start the Wireless
Networking
Utility
automatically, it could be that the computer is running other
applications that are interfering with the CD drive.
If the Wireless
Networking
Utility screen does not appear within
15–20 seconds, open up your CD-ROM drive by double-clicking
on the “My Computer” icon. Next, double-click on the CD-ROM
drive that the Installation CD has been placed in to start the
installation. Then double-click on the folder named “Files”. Next,
double-click on the icon named “Setup.exe”.
Power LED does not come ON; Adapter is not working.
If the LED indicators are not ON, the problem may be that the
Adapter is not connected or installed properly.
Verify that the Adapter is plugged firmly into the USB slot of
your computer. Check to see that the drivers for the Adapter
have been installed. Right-click on the “My Computer” icon on
your desktop. Choose “Properties” and navigate to the “Device
Manager” and see if your Adapter is listed without any errors. If
an error is indicated, contact Belkin Technical Support.
Link LED is blinking slowly; cannot connect to a wireless
network or the Internet.
If your Adapter appears to be functioning properly, but you
cannot connect to a network or you have a red wireless icon
at the bottom of your screen, the problem may be that there is
a mismatch between the network name (SSID) settings in your
wireless network properties.
Check the SSID settings to see if they match. The SSID is
case-sensitive and the spelling on each computer must be
exactly the same in order for the Adapter to connect to the
wireless router (or access point).
Note:
To check the SSID settings or look for an available
network, double-click the Signal Indicator icon to bring up the
“Wireless Networks” screen. Click “Add” if you do not see the
network you are trying to connect to and type in the SSID.
For more information about setting up an SSID, please refer to
your router manufacturer’s user manual.
If issues persist even at close range, please contact Belkin
Technical Support.
34
section
1
2
3
4
5
6
Troubleshooting
Link LED is solid but I cannot connect to the Internet.
If you have a signal but can’t get online or obtain an IP address,
the problem may be that there is a mismatch between the
encryption key settings in your computer and
wireless router (or
access point)
.
Check the WEP key settings to see if they match. The key is
case-sensitive and the spelling on each computer and wireless
router (or access point) must be exactly the same in order for
the Adapter to connect to the router. For more information about
encryption, please see the “Securing your Wi-Fi
Network” section
of this User Manual.
If issues persist even at close range, please contact Belkin
Technical Support.
Data transfer is sometimes slow.
Wireless technology is radio-based, which means connectivity
and the throughput performance between devices decreases
when the distance between devices increases. Other factors that
will cause signal degradation (metal is generally the worst culprit)
are obstructions such as walls and metal appliances. As a result,
the typical indoor range of your wireless devices will be between
100 to 200 feet. Note also that connection speed may decrease
as you move farther from the wireless router (or access point).
In order to determine if wireless issues are related to range, we
suggest temporarily moving the computer, if possible, to five to
10 feet away from the wireless router (or access point). Please
see the section titled “Placement of your Wireless Networking
Hardware for Optimal Performance” in this manual.
If issues persist even at close range, please contact Belkin
Technical Support.
Signal strength is poor.
Wireless technology is radio-based, which means connectivity
and the throughput performance between devices decreases
when the distance between devices increases. Other factors
that will cause signal degradation (metal is generally the worst
culprit) are obstructions such as walls and metal appliances. As
a result, the typical indoor range of your wireless devices will be
between 100 to 200 feet. Note also that connection speed may
decrease as you move farther from the wireless router (or access
35
Troubleshooting
point). Please see the section titled “Placement of your Wireless
Networking Hardware for Optimal Performance” in this manual.
If issues persist even at close range, please contact Belkin
Technical Support.
Why are there two wireless utilities in my system tray?
Which one should I use?
There are several features and advantages to using the Belkin
Wireless
Networking
Utility over the Windows XP Wireless
Zero Configuration utility. We offer a site survey, detailed link
information, and adapter diagnosis, to name a few.
It’s essential to know which utility is managing your adapter. We
recommend using the Belkin Wireless
Networking
Utility. To use
the Belkin Wireless
Networking
Utility, follow the steps below:
Step 1
Right-click on the network status icon in the system tray
and select “View Available Wireless Networks”.
Step 2
Click on the “Advanced” button in the lower left-hand
corner of the “Available Wireless Networks” window.
Step
3
From the “Advanced” tab, uncheck “Use Windows to
configure my wireless network”. Once the box is unchecked,
click “OK” to close the window.
You are now using the Belkin Wireless
Networking
Utility to
configure the Adapter.
36
section
1
2
3
4
5
6
Troubleshooting
What’s the difference between 802.11b, 802.11g, 802.11a,
and Pre-N?
Currently there are four levels of wireless networking standards, which
transmit data at very different maximum speeds. Each is based on
the designation for certifying network standards. The most common
wireless networking standard, 802.11b, transmits information at
11Mbps; 802.11a and 802.11g work at 54Mbps; and Pre-N works
at 108Mbps. Pre-N, the precursor to the upcoming 802.11n release,
promises speeds that exceed 802.11g, and up to twice the wireless
coverage area. See the following chart for more detailed information.
Wireless Comparison Chart
Wireless
Technology
802.11b
802.11g
802.11a
Belkin
Pre-N
Speed
11Mbps
54Mbps
54Mbps
600% faster
than standard
802.11g*
Frequency
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed band
2.4GHz
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed
band 2.4GHz
5GHz—
uncrowded
band
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed
band 2.4GHz
Compatibility
Compatible
with 802.11g
Compatible
with 802.11b
Incompatible
with 802.11b
or 802.11g
Compatible with
802.11g
or 802.11b
Coverage*
Depends on
interference—
typically
100–200 ft.
indoors
Depends on
interference—
typically
100–200 ft.
indoors
Interference
range is
typically 50–
100 ft.
Up to 800% wider
coverage than
standard 802.11g*
Advantage
Mature—legacy
technology
Common—
widespread
use for Internet
sharing
Less
interference—
great for
multimedia
application
Leading edge—
best coverage
and throughput
*Distance and connection speeds will vary depending on your networking environment.
37
Troubleshooting
Technical Support
You can find technical support information at
www.belkin.com/
networking
. If you want to contact technical support by phone,
please call:
US: 877-736-5771
Europe: 00 800 223 55 460
Australia: 1800 235 546
New Zealand
: 0
800 235 546
Singapore
: 800 616 1790
38
Information
Wi-Fi
®
Interoperability Certificate
39
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the FCC radio frequency
exposure limits. Nevertheless, the device shall be used in such a manner that
the potential for human contact during normal operation is minimized.
IMPORTANT NOTE:
Federal Communication Commission (FCC) Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure
limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the
measurement methods and procedures specified in OET Bulletin 65
Supplement C.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
40
This equipment generates, uses, and can radiate radio frequency energy.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications to
this device that are not expressly approved by Belkin Corporation may void
the user’s authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 210 Industry Canada.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
Europe-European Union Notice
Radio products with the CE 0682 or CE alert marking
comply with the R&TTE Directive (1995/5/EC) issued by the
Commission of the European Community.
Compliance with this directive implies conformity to the following European
Norms (in brackets are the equivalent international standards).
• EN 60950 (IEC60950) – Product Safety
• EN 300 328 Technical requirement for radio equipment
• ETS 301489-1/-17 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label on your
Belkin product.
Products with the CE marking comply with the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the
Commission of the European Community. Compliance with these directives
implies conformity to the following European Norms (in brackets are the
equivalent international standards):
• EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
• EN 61000-3-3 (IEC610000) – Power Line Flicker
• EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled with CE 0682 or CE
alert marking and may also carry the CE logo.
Information
41
1
2
3
4
5
6
section
Information
Belkin Corporation Limited Lifetime Product Warranty
What this warranty covers.
Belkin Corporation warrants to the original purchaser of this Belkin product that the
product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin Corporation warrants the Belkin product for the lifetime of the product.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free
of charge (except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to
Belkin Corporation for inspection upon Belkin’s request at the sole expense of
the purchaser, or if Belkin Corporation determines that the Belkin product has
been improperly installed, altered in any way, or tampered with. The Belkin
Product Warranty does not protect against acts of God (other than lightning)
such as flood, earthquake, war, vandalism, theft, normal-use wear and
tear, erosion, depletion, obsolescence, abuse, damage due to low voltage
disturbances (i.e. brownouts or sags), non-authorized program, or system
equipment modification or alteration.
How to get service.
To get service for your Belkin product you must take the following steps:
1.
Contact Belkin Corporation at 501 W. Walnut St., Compton CA 90220,
Attn: Customer Service, or call (800)-223-5546, within 15 days of the
Occurrence. Be prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2.
Your Belkin Customer Service Representative will then instruct you on how to
forward your receipt and Belkin product and how to proceed with your claim.
Belkin Corporation reserves the right to review the damaged Belkin product.
All costs of shipping the Belkin product to Belkin Corporation for inspection
shall be borne solely by the purchaser. If Belkin determines, in its sole
discretion, that it is impractical to ship the damaged equipment to Belkin
Corporation, Belkin may designate, in its sole discretion, an equipment repair
facility to inspect and estimate the cost to repair such equipment. The cost,
if any, of shipping the equipment to and from such repair facility and of such
estimate shall be borne solely by the purchaser. Damaged equipment must
remain available for inspection until the claim is finalized. Whenever claims
are settled, Belkin Corporation reserves the right to be subrogated under any
existing insurance policies the purchaser may have.
42
42
Information
Information
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN
CORPORATION, THERE ARE NO OTHER WARRANTIES, EXPRESSED
OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED
WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts,
so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN CORPORATION BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES
SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING
OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have other
rights, which may vary from state to state. Some states do not allow the
exclusion or limitation of incidental, consequential, or other damages, so the
above limitations may not apply to you.
43
Belkin Ltd.
7 Bowen Crescent, West Gosford
NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk,
The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Tech Support
US:
877-736-5
771
310-898-1100 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 800 616 1790
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed. 54g is a trademark of Broadcom Corporation in the United
States and/or other countries. The mark Wi-Fi is a registered mark of the Wi-Fi Alliance. The
“Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.
P
74471-E
Wireless G USB
Network Adapter