Belkin F5D7051D Wireless G Plus USB Network Adapter User Manual

Belkin International, Inc. Wireless G Plus USB Network Adapter

Contents

user manual model 1

Download: Belkin F5D7051D Wireless G Plus USB Network Adapter User Manual
Mirror Download [FCC.gov]Belkin F5D7051D Wireless G Plus USB Network Adapter User Manual
Document ID854546
Application ID2wzjwL44imz8H36Uc/q/Bg==
Document Descriptionuser manual model 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize55.51kB (693906 bits)
Date Submitted2007-10-15 00:00:00
Date Available2007-10-15 00:00:00
Creation Date2007-10-12 09:32:21
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2007-10-12 09:32:21
Document Titleuntitled

DX-BUSB Manaul_20071012
Page 1 of 37
Dynex
Wireless G USB Network Adapter
Connect your desktop or notebook computer to a wireless network
User Manual
Table of Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Benefits of a Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Advantages of a Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . 1
Placement of your Wireless Networking
Hardware for Optimal Performance . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Applications and Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Installing and Setting up the Adapter . . . . . . . . . . . . . . . . . . . . . . . . 10
Step 1: Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Step 2: Connect. . . . . . 11
Step 3: Configure. . . . . . . . . . . . . . . . . 13
4 Using the Dynex Wireless Networking Utility. . . . . . . . . . . . . . . . . 15
Accessing the Dynex Wireless Networking Utility from the Windows System
Tray.16
Setting Wireless Network Profiles
Securing your Wi-Fi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuring your Dynex Wireless G USB Network Adapter to use
Security. . . . . . . . . . 28
5 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
DX-BUSB Manaul_20071012
Page 2 of 37
Introduction
Thank you for purchasing the Dynex Wireless G USB Network Adapter (the
Adapter). Now you can take advantage of this great new technology and gain the
freedom to network your home and office computers wirelessly. This Adapter
allows you to connect a desktop or notebook computer to your network. The easy
installation and setup will have you networking wirelessly in minutes. Please be
sure to read through this User Manual completely, and pay special attention to
the section entitled “Placement of your Wireless Networking Hardware for
Optimal Performance” on page 2.
Benefits of a Home Network
Your Dynex Home Network will allow you to:
• Share one high-speed Internet connection with all the computers
in your home
• Share resources, such as files, and hard drives among all the
connected computers in your home
• Share a single printer with the entire family
• Share documents, music, video, and digital pictures
• Store, retrieve, and copy files from one computer to another
• Simultaneously play games online, check Internet email,
and chat
Advantages of a Wireless Network
Here are some of the advantages of setting up a Dynex wireless network:
• Mobility –you’ll no longer need a dedicated “computer room”— now you can
work on a networked laptop or desktop computer anywhere within your wireless
range
• Easy installation – Dynex Easy Installation Wizards make setup simple
• Flexibility – set up and access printers, computers, and other networking
devices from anywhere in your home
• Easy expansion – the wide range of Dynex networking products lets you
expand your network to include devices such as printers and gaming consoles
• No cabling required – you can spare the expense and hassle of retrofitting
Ethernet cabling throughout the home or office
• Widespread industry acceptance – choose from a wide range of
interoperable networking products
Placement of your Wireless Networking Hardware for Optimal Performance
Your wireless connection will be stronger the closer your computer is to your
wireless router (or access point). Typical indoor operating range for your wireless
devices is between 100 and 200 feet. In the same way, your wireless connection
and performance will degrade somewhat as the distance between your wireless
router (or access point) and connected devices increases. This may or may not
DX-BUSB Manaul_20071012
Page 3 of 37
be noticeable to you. As you move farther from your wireless router (or access
point), connection speed may decrease. Factors that can weaken signals simply
by getting in the way of your network’s radio waves are metal appliances or
obstructions, and walls.
If you have concerns about your network’s performance that might be related to
range or obstruction factors, try moving the computer to a position between five
and 10 feet from the wireless router (or access point) in order to see if distance is
the problem. If difficulties persist even at close range, please contact Dynex
Technical Support.
Note: While some of the items listed below can affect network performance, they
will not prohibit your wireless network from functioning; if you are concerned that
your network is not operating at its maximum effectiveness, this checklist may
help.
1. Placement of your Wireless Router (or Access Point)
Place your wireless router (or access point), the central connection point of your
network, as close as possible to the center of your wireless network devices.
To achieve the best wireless network coverage for your “wireless clients,” (i.e.
computers enabled by Dynex Wireless Notebook Cards, Wireless Desktop Cards,
and Wireless USB Adapters):
• Ensure that your wireless router’s (or access point’s) antennas are parallel to
each other, and are positioned vertically (toward the ceiling). If your wireless
router (or access point) itself is positioned vertically, point the antennas as much
as possible in an upward direction.
• In multistory homes, place the wireless router (or access point) on a floor that is
as close to the center of the home as possible. This may mean placing the
wireless router (or access point) on an upper floor.
• Try not to place the wireless router (or access point) near a cordless 2.4GHz
phone
2. Avoid Obstacles and Interference
Avoid placing your wireless router (or access point) near devices that may emit
radio “noise”, such as microwave ovens. Other objects that can inhibit wireless
communication can include:
• Refrigerators
• Washers and/or dryers
DX-BUSB Manaul_20071012
Page 4 of 37
• Metal cabinets
• Large aquariums
• Metallic-based, UV-tinted windows
If your wireless signal seems weak in some spots, make sure that objects such
as these are not blocking the signal’s path between your computers and wireless
router (or access point).
3. Cordless Phone Placement
If the performance of your wireless network is impaired after attending to the
above issues, and you have a cordless phone:
• Try moving cordless phones away from the wireless router (or access point)
and your wireless-enabled computers.
• Unplug and remove the battery from any cordless phone that operates on the
2.4GHz band (check manufacturer’s information). If this fixes the problem, your
phone may be interfering.
• If your phone supports channel selection, change the channel on the phone to
the farthest channel from your wireless network as possible. For example,
change the phone to channel 1 and move your wireless router (or access point)
to channel 11. (Your channel selection will vary depending on your region.) See
your phone’s user manual for detailed instructions.
• If necessary, consider switching to a 900MHz or 5GHz cordless phone.
4. Choose the “Quietest” Channel for your Wireless Network
In locations where homes or offices are close together, such as apartment
buildings or office complexes, there may be wireless networks nearby that can
conflict with yours. Use the Site Survey capabilities of your Wireless Networking
Utility to locate any other wireless networks, and move your wireless router (or
access point) and computers to a channel as far away from other networks as
possible.
Experiment with more than one of the available channels, in order to find the
clearest connection and avoid interference from neighboring cordless phones or
other wireless devices.
For more Dynex wireless networking products, use the detailed Site Survey and
wireless channel information included in your User Manual.
5. Secure Connections, VPNs, and AOL
Secure connections typically require a user name and password, and are used
where security is important. Secure connections include:
DX-BUSB Manaul_20071012
Page 5 of 37
• Virtual Private Network (VPN) connections, often used to connect remotely to
an office network
• The “Bring Your Own Access” program from America Online (AOL), which lets
you use AOL through broadband provided by another cable or DSL service
• Most online banking websites
• Many commercial websites that require a user name and password to access
your account
Secure connections can be interrupted by a computer’s power management
setting, which causes it to “go to sleep.” The simplest solution to avoid this is to
simply reconnect by re-running the VPN or AOL software, or by re-logging into
the secure website.
A second alternative is to change your computer’s power management settings
so it does not go to sleep; however, this may not be appropriate for portable
computers. To change your power management setting in Windows, see the
“Power Options” item in the Control Panel.
If you continue to have difficulty with Secure Connections, VPNs, and AOL,
please review steps 1–4 above to be sure you have addressed these issues.
For more information regarding our networking products, visit our website at
www.Dynexsupport.com or call Dynex Technical Support.
Overview
Product Features
The Adapter complies with the IEEE 802.11g standard in order to communicate
with other 802.11g-compliant wireless devices at 54Mbps. The Adapter is
compatible with all 802.11g devices as well as other 802.11b products at 11Mbps.
802.11g products operate on the same 2.4GHz frequency band as 802.11b WiFi® products.
• 2.4GHz ISM (Industrial, Science, and Medical) band operation
• Integrated easy-to-use Wireless Networking Utility
• USB 2.0 interface, for operation in virtually any desktop or notebook computer
• WPA, WPA2, 64-bit WEP (Wired Equivalent Privacy), or 128-bit encryption
• Wireless access to networked resources
• Support for both Infrastructure and Ad-Hoc (peer-to-peer) networking modes
• Data rate of up to 54Mbps (802.11g), or 11Mbps (802.11b)
• Easy installation and use
• External antenna
• LED power and network link indicators
DX-BUSB Manaul_20071012
Page 6 of 37
Applications and Advantages
• Wireless roaming with a laptop around the home or office
Offers the freedom of networking—without cables
• Connection rates of up to 54Mbps
Provides immediate wireless connectivity at home, work, and hotspot locations
without compromising the use of existing 802.11b and 802.11g products
• Compatibility with 802.11b products
802.11g wireless LAN solutions are backward-compatible with existing Wi-Fi
(IEEE 802.11b) products and with other products that display the 54g logo
• Difficult-to-wire environments
Enables networking in buildings with solid or finished walls, or open areas where
wiring is difficult to install
• Frequently changing environments
Adapts easily in offices or environments that frequently rearrange or change
locations
• Temporary LANs for special projects or peak time
Sets up temporary networks such as at trade shows, exhibitions, and
construction sites, which need networks on a short-term basis; also companies
who need additional workstations for a peak activity period
• SOHO (Small Office/Home Office) networking needs
Provides the easy and quick, small network installation SOHO
users need
Product Specifications
Host Interface:
USB 2.0 interface
Power Consumption:
Tx/Rx peak 510/250mA @ 3.3VDC (max.)
Operating Temperature: 32–140 degrees F (0–60 degrees C)
Storage Temperature:
-4–176 degrees F (-20–80 degrees C)
Humidity:
Max. 90% (non-condensing)
Typical Operating Range: 100–200 ft. (30–60m) indoors
[insert image from P74471-A, p.8]
(a) Protective Cap
The cap can be stored on the opposite end of the USB connector.
Insert image from P74471-A, p.8
DX-BUSB Manaul_20071012
Page 7 of 37
The cap snaps over the USB connector for protection.
Insert image from P74471-A, p.8
(b) Activity LED
Lights up and flashes when the Adapter is active
Blinking Green: Active
Off: Not connected to network
On: Connected to network
(c) USB Adapter
Fits securely into your computer’s USB slot or into the Desktop Adapter Base
(included).
(d) Desktop Adapter Base
Lets you extend the USB Adapter away from interfering objects around your
computer.
System Requirements
- PC-compatible desktop computer with one available USB slot and CD-ROM
drive
- Windows® 98SE, Me, 2000, or XP
Package Contents
- Wireless G USB Network Adapter
- Desktop Adapter Base
- Quick Installation Guide
- Installation Software CD
- User Manual
3 Installing and Setting up the Adapter
Step 1. Install
Important Note: Install the software before connecting the Adapter.
1.1 Insert the Installation Software CD into your CD-ROM drive.
DX-BUSB Manaul_20071012
Page 8 of 37
1.2 The Dynex Wireless Networking Utility setup screen will automatically appear
(may take 15–20 seconds to appear).
[insert splash page of Dynex Wireless Networking Utility setup screen, image
7050v4000-1]
1.3 Click “install” from the menu.
Note: If the Dynex Wireless Networking Utility setup screen does not appear
within 20 seconds, access your CD-ROM, double-click on the “My Computer”
icon, and then double-click on the CD-ROM drive into which you have placed the
installation CD. Double-click on the folder named “Files”, then double-click on the
icon named “setup.exe”.
1.4 Choose an installation location, and click “Next” to accept the default location
or click “Browse” to select a different location before clicking “Next”.
(insert image DX-BUSBv4000-2)
Step 2. Connect
Plug the Adapter into an Available USB Slot on your Notebook Computer
DX-BUSB Manaul_20071012
Page 9 of 37
2.1 During the install process, you will be prompted to insert your Adapter. Plug
the Adapter into an available USB port on your computer and follow the onscreen instructions.
[insert F5D7010 QIG 01.jpg]
(Insert image from P74472-A, p.4)
Note: If your system did not prompt you to insert your Adapter after the
installation is completed, please do so now.
2.2 Dynex Wireless Networking Utility installation is now complete. Click “Finish”
to close the Wizard.
Insert DX-BUSBv4000-5]
DX-BUSB Manaul_20071012
Page 10 of 37
Step 3. Configure
Use the Dynex Wireless Networking Utility
3.1 After successfully installing the Adapter, double-click the Dynex Wireless
Networking Utility icon located on the desktop screen.
[insert F5D7000 QIG 06.jpg]
3.2 The Wireless Networking Utility screen will appear.
Select a network to connect to by selecting a network from the “Available
Networks” list. Then, click “Connect”.
[insert F5D7000 QIG 09.jpg]
DX-BUSB Manaul_20071012
Page 11 of 37
Note: In order to see your available networks, you must be near a working
wireless router or access point.
3.3 The Dynex Wireless Networking Utility icon can also be found on the system
tray.
[insert F5D7000 QIG 10.jpg]
(Note at bottom of page) Note: Double-clicking on the Dynex Wireless
Networking Utility icon on the system tray will bring up the “Utility” screen.
Installation is now complete.
Using the Dynex Wireless Networking Utility
After successfully installing the Dynex Wireless Networking Utility (WNU),
configurations for wireless connection and security are just a few easy clicks
away.
DX-BUSB Manaul_20071012
Page 12 of 37
Accessing the Dynex Wireless Networking Utility from the Windows
System Tray
To access the WNU, simply place your mouse pointer and right-click over the
WNU icon on the Windows system tray on the lower right-hand corner of your
computer’s desktop.
[insert F5D7000-10.jpg]
[insert F5D7000-11.jpg]
If the icon is not present, click on “Start > Programs > Dynex > Wireless
Networking Utility”.
[insert F5D7000
22.jpg]
The WNU’s default screen is the “Current Status” tab. The “Current Status” tab
displays the current network status and available networks.
DX-BUSB Manaul_20071012
Page 13 of 37
Network Status
This window displays the connectivity status of the current network, between the
computer and router, and between the router and the Internet. In the event of a
problem, use the “Network Status” window to determine the source (e.g.,
computer, router, or Internet/modem).
Available Networks
This window displays the available networks at the current location as well as
their SSID, Signal Strength, Security Type, Channel, and Network Type.
Lost Wireless Connection
If the current wireless connection is lost, a window will pop up and the WNU will
attempt to reconnect.
Connection Failure
Other options will appear during attempts to reconnect. To stop connecting, click
“Stop” and to reattempt connection, click “Retry”.
DX-BUSB Manaul_20071012
Page 14 of 37
Network Status and Solution Tips
To further understand the current Network Status, click “Open Wireless Utility”.
The default screen will be the “Current Status” tab and the “Network Status”
section determines which connections are good and/or faulty.
[insert F5D7000-12.jpg]
The WNU also features a “Solution Tips” section that provides troubleshooting
guidelines.
Setting Wireless Network Profiles
The “My Connections” tab on the WNU allows you to add, edit, and delete
connection profiles. It also displays signal strength, security, and network type.
[insert F5D7000-13.jpg]
DX-BUSB Manaul_20071012
Page 15 of 37
Securing your Wi-Fi® Network
If you choose to connect to a secure network, determine the type of security
(WPA or WEP*) and use the appropriate field in the dialog box.
*Note: Types of security
Note: When you select a network using encryption, you will first see the simple
security screen. Click the “Advanced” button to see other security options (below).
DX-BUSB Manaul_20071012
[insert F5D7000-14.jpg]
Page 16 of 37
DX-BUSB Manaul_20071012
Page 17 of 37
Wired Equivalent Privacy (WEP) is a less secure, but more widely adopted
wireless security protocol. Depending on the security level (64- or 128-bit), the
user will be asked to input a 10- or 26-character hex key. A hex key is a
combination of letters, a–f, and numbers, 0–9.
Wireless Protected Access (WPA) is the new standard in the wireless security.
However, not all wireless cards and adapters support this technology. Please
check your wireless adapter’s user manual to check if it supports WPA. Instead
of a hex key, WPA uses only passphrases, which are much easier to remember.
The following section, intended for the home, home office, and small office user,
presents a few different ways to maximize the security of your wireless network.
At the time of publication, four encryption methods are available:
Encryption Methods:
Name
64-Bit Wired
Equivalent
Privacy
Acronym 64-bit WEP
128-Bit Wired
Equivalent
Privacy
128-bit WEP
Security Good
Features Static keys
Better
Static keys
Encryption
keys based
on RC4
algorithm
(typically 40bit keys)
More secure
than 64-bit
WEP using a
key length of
104 bits plus
24 additional
bits of systemgenerated data
Wi-Fi Protected
Access-TKIP
Wi-Fi Protected
Access 2
WPA-TKIP/AES
(or just WPA)
Best
Dynamic key
encryption and
mutual
authentication
TKIP (Temporal
Key Integrity
Protocol) added
so that keys are
rotated and
encryption is
strengthened
WPA2-AES (or
just WPA2)
Best
Dynamic key
encryption and
mutual
authentication
AES (Advanced
Encryption
Standard) does
not cause any
throughput loss
DX-BUSB Manaul_20071012
Page 18 of 37
Wired Equivalent Privacy (WEP)
WEP is a common protocol that adds security to all Wi-Fi-compliant wireless
products. WEP gives wireless networks the equivalent level of privacy protection
as a comparable wired network.
64-Bit WEP
64-bit WEP was first introduced with 64-bit encryption, which includes a key
length of 40 bits plus 24 additional bits of system-generated data (64 bits total).
Some hardware manufacturers refer to 64-bit as 40-bit encryption. Shortly after
the technology was introduced, researchers found that 64-bit encryption was too
easy to decode.
128-Bit WEP
As a result of 64-bit WEP’s potential security weaknesses, a more secure
method of 128-bit encryption was developed. 128-bit encryption includes a key
length of 104 bits plus 24 additional bits of system-generated data (128 bits total).
Some hardware manufacturers refer to 128-bit as 104-bit encryption.
Most of the new wireless equipment in the market today supports both 64-bit and
128-bit WEP encryption, but you might have older equipment that only supports
64-bit WEP. All Dynex wireless products will support both 64-bit and 128-bit WEP.
Encryption Keys
After selecting either the 64-bit or 128-bit WEP encryption mode, it is critical that
you generate an encryption key. If the encryption key is not consistent throughout
the entire wireless network, your wireless networking devices will be unable to
communicate with one another.
You can enter your key by typing in the hex key manually, or you can type a
passphrase into the “Passphrase” field and click “Generate” to create a key. A
hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–
9. For 64-bit WEP, you need to enter 10 hex keys. For 128-bit WEP, you need to
enter 26 hex keys.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
The WEP passphrase is NOT the same as a WEP key. Your Adapter uses this
passphrase to generate your WEP keys, but different hardware manufacturers
might have different methods on generating the keys. If you have multiple
vendors’ equipment in your network, the easiest thing to do is to use the hex
WEP key from your wireless router (or
DX-BUSB Manaul_20071012
Page 19 of 37
access point) and enter it manually into the hex WEP key table in your Adapter’s
configuration screen.
Wi-Fi Protected Access (WPA)
WPA is a new Wi-Fi standard that improves upon the security features of WEP.
To use WPA security, the drivers and software of your wireless equipment must
be upgraded to support it. These updates will be found on your wireless vendor’s
website. There are three types of WPA security: WPA-PSK (no server), and WPA
(with radius server), and WPA2.
WPA-PSK (no server) uses what is known as a pre-shared key as the network
key. A network key is a password that is between eight and 63 characters long. It
can be a combination of letters, numbers, or characters. Each client uses the
same network key to access the network. Typically, this is the mode that will be
used in a home environment.
WPA (with radius server) is a system where a radius server distributes the
network key to the clients automatically. This is typically found in a business
environment.
WPA2 requires Advanced Encryption Standard (AES) for encryption of data,
which offers much greater security than WPA. WPA uses both Temporal Key
Integrity Protocol (TKIP) and (AES) for encryption.
For a list of Dynex wireless products that support WPA, please visit our website
at www.Dynex.com/networking.
Most Wi-Fi products ship with security turned off. So once you have your network
working, you need to activate WEP or WPA and make sure all your wireless
devices are sharing the same network key.
IMPORTANT: You must now set all wireless network cards/adapters to match
these settings.
Configuring your Dynex Wireless G USB Network Adapter to use Security
At this point, you should already have your wireless router (or access point) set
to use WPA or WEP. In order for you to gain a wireless connection, you will need
to set your Wireless G USB Network Adapter to use the same security settings.
Changing the Wireless Security Settings
DX-BUSB Manaul_20071012
Page 20 of 37
The Dynex Wireless G USB Network Adapter supports the latest WPA security
feature as well as the legacy WEP security standard. By default, wireless security
is disabled.
To enable security, you will first need to determine which standard is used by the
router or access point. (See your wireless router’s or access point’s manual for
directions on how to access the security settings.)
[insert F5D7000-18.jpg]
To access the security settings on your Adapter, click the “My Connections” tab
and point to the connection for which you want to change security settings. Click
“Edit” to change settings.
WEP Setup
64-Bit WEP Encryption
1. Select “WEP” from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key by typing in
the hex key manually, or you can type in a passphrase in the “Passphrase” field
and click “Generate” to create a key.
A hex (hexadecimal) key is a combination of numbers and letters from A–F and
0–9. For 64-bit WEP, you need to enter 10 hex keys.
DX-BUSB Manaul_20071012
Page 21 of 37
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
[insert F5D7000-15.jpg]
3. Click “Save” to finish. Encryption in the wireless router
(or access point) is now set. Each of your computers on your
wireless network will now need to be configured with the same
DX-BUSB Manaul_20071012
Page 22 of 37
security settings.
WARNING: If you are using a wireless client to turn on the security
settings in your wireless router (or access point), you will temporarily
lose your wireless connection until you activate security on your
wireless client. Please record the key prior to applying changes in the wireless
router (or access point). If you don’t remember the hex key, your client will be
locked out of the wireless router (or access point).
128-Bit WEP Encryption
1. Select “WEP” from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter your
key manually by typing in the hex key manually, or you can type
in a passphrase in the “Passphrase” field and click “Generate” to
create a key.
A hex (hexadecimal) key is a combination of numbers and letters from
A–F and 0–9. For 128-bit WEP, you need to enter 26 hex keys.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
[insert F5D7000-16.jpg]
DX-BUSB Manaul_20071012
Page 23 of 37
3. Click “Save” to finish. Encryption in the wireless router
(or access point) is now set. Each of the computers on your
wireless network will now need to be configured with the same
security settings.
DX-BUSB Manaul_20071012
Page 24 of 37
WARNING: If you are using a wireless client to turn on the security
settings in your wireless router (or access point), you will temporarily
lose your wireless connection until you activate security on your
wireless client. Please record the key prior to applying changes in the wireless
router (or access point). If you don’t remember the hex key,
your client will be locked out of the wireless router (or access point).
WPA-PSK (no server)
Choose this setting if your network does not use a radius server.
WPA-PSK (no server) is typically used in home and small
office networking.
1. From the “Network Authentication” drop-down menu, select “WPA-PSK (no
server)”.
2. Enter your network key. This can be from eight to 63 characters and can be
letters, numbers, or symbols. This same key must be used on all of the clients
(network cards) that you want to include in your network.
[insert F5D7000-17.jpg]
DX-BUSB Manaul_20071012
Page 25 of 37
3. Click “Save” to finish. You must now set all clients (network cards) to match
these settings.
Wireless Networking Utility Options
DX-BUSB Manaul_20071012
Page 26 of 37
[insert F5D7000-19.jpg]
The “Options” tab on the WNU provides the user the ability to customize his or
her WNU settings.
Wireless Networking Utility Help
The WNU “Help” tab provides users with access to online and telephone support,
as well as advanced diagnostic tools.
[insert F5D7000-20.jpg]
DX-BUSB Manaul_20071012
Page 27 of 37
Advanced Diagnostic Tools
The “Advanced Diagnostic Tools” section is the central control panel for all the
settings of the hardware and software components of the wireless network. It
provides an array of tests and connectivity services to ensure optimal network
performance.
[insert F5D7000-21.jpg]
DX-BUSB Manaul_20071012
Page 28 of 37
Troubleshooting
I can’t connect to the Internet wirelessly.
If you are unable to connect to the Internet from a wireless computer, please
check the following items:
1. Look at the lights on your wireless router. If you’re using a Dynex Wireless
Router, the lights should be as follows:
DX-BUSB Manaul_20071012
Page 29 of 37
• The “Power” light should be on.
• The “Connected” light should be on, and not blinking.
• The “WAN” light should be either on or blinking.
If your Dynex Wireless Router’s lights match these descriptions, go to number 2,
below.
If this is NOT the case, please contact Dynex technical support.
If you are not using a Dynex Wireless Router, consult that router manufacturer’s
user guide.
2. Open your Wireless Networking Utility software by clicking on the icon in the
system tray at the bottom right-hand corner of the screen; the tray icon should
look like this (the icon may be red or green):
3. The window that opens will show a list of “Available Networks”. Available
networks are wireless networks you can connect to.
If you are using a Dynex 802.11g (54g) Router, “Dynex54g” is the default name.
If you are using a Dynex 802.11b Router, the default name should be “WLAN”.
If you are NOT using a Dynex Router, please consult your router manufacturer’s
user manual for the default name.
The name of your wireless network appears in “Available Networks”.
If the correct network name is listed in the “Available Networks” list, please follow
the steps below to connect wirelessly:
1. Click on the correct network name in the “Available Networks” list.
2. If the network has security (encryption) enabled, you will need to enter the
network key. For more information regarding security, please see “Securing your
Wi-Fi Network” on page xx of this manual.
3. Within a few seconds, the tray icon in the lower right-hand corner of your
screen should turn green, indicating a successful connection to the network.
If you are still unable to access the Internet after connecting to the wireless
network, please contact Dynex Technical Support.
The name of your wireless network DOES NOT appear in the list of
“Available Networks”.
If the correct network name is not listed under “Available Networks” in the
Wireless Networking Utility, please attempt the following troubleshooting steps:
DX-BUSB Manaul_20071012
Page 30 of 37
1. Temporarily move computer, if possible, to five to 10 feet away from the
Wireless Router (or Access Point). Close the Wireless Networking Utility,
and reopen it. If the correct network name now appears under “Available
Networks”, you may have a range or interference problem. Please see the
suggestions listed in the “Placement of your Wireless Networking
Hardware for Optimal Performance” section on page 2.
2. Using a computer that is connected to the Wireless Router (or Access
Point) via a network cable (as opposed to wirelessly), ensure that
“Broadcast SSID” is enabled. This setting is found on the Router’s
wireless “Channel and SSID” configuration page. For detailed instructions
on accessing this page and changing settings, please see your Wireless
Router’s (or Access Point’s) User Manual.
If you are still unable to access the Internet after completing these steps, please
contact Dynex Technical Support.
Installation CD-ROM does not start Wireless Networking Utility.
If the CD-ROM does not start the Wireless Networking Utility automatically, it
could be that the computer is running other applications that are interfering with
the CD drive.
If the Wireless Networking Utility screen does not appear within 15-20 seconds,
open up your CD-ROM drive by double-clicking on the “My Computer” icon. Next,
double-click on the CD-ROM drive that the Installation CD has been placed in to
start the installation. Then, double-click on the folder named “Files”. Next,
double-click on the icon named “Setup.exe”.
Power LED does not come ON; Adapter is not working.
If the LED indicators are not ON, the problem may be that the Adapter is not
connected or installed properly.
Verify that the Adapter is plugged firmly into the USB slot of your computer.
Check to see that the drivers for the Adapter have been installed. Right-click on
the “My Computer” icon on your desktop. Choose “Properties” and navigate to
the “Device Manager” and see if your Adapter is listed without any errors. If an
error is indicated, contact Dynex Technical Support.
Link LED is blinking slowly; cannot connect to a wireless network or the
Internet.
If your Adapter appears to be functioning properly, but you cannot connect to a
network or you have a red wireless icon at the bottom of your screen, the
problem may be that there is a mismatch between the network name (SSID)
settings in your wireless network properties.
DX-BUSB Manaul_20071012
Page 31 of 37
Check the SSID settings to see if they match. The SSID is case-sensitive and the
spelling on each computer must be exactly the same in order for the Adapter to
connect to the wireless router (or access point).
Note: To check the SSID settings or look for an available network, double-click
the Signal Indicator icon to bring up the “Wireless Networks” screen. Click “Add”
if you do not see the network you are trying to connect to and type in the SSID.
For more information about setting up an SSID, please refer to your router
manufacturer’s user manual.
If issues persist even at close range, please contact Dynex Technical Support.
Link LED is solid but I cannot connect to the Internet.
If you have a signal but can’t get online or obtain an IP address, the problem may
be that there is a mismatch between the encryption key settings in your computer
and wireless router (or access point).
Check the WEP key settings to see if they match. The key is case-sensitive and
the spelling on each computer and wireless router (or access point) must be
exactly the same in order for the Adapter to connect to the router. For more
information about encryption, please see the “Securing your Wi-Fi Network”
section in this manual.
If issues persist even at close range, please contact Dynex Technical Support.
Data transfer is sometimes slow.
Wireless technology is radio-based, which means connectivity and the
throughput performance between devices decreases when the distance between
devices increases. Other factors that will cause signal degradation (metal is
generally the worst culprit) are obstructions such as walls and metal appliances.
As a result, the typical indoor range of your wireless devices will be between 100
to 200 feet. Note also that connection speed may decrease as you move farther
from the wireless router (or access point).
In order to determine if wireless issues are related to range, we suggest
temporarily moving the computer, if possible, to five to 10 feet away from the
wireless router (or access point). Please see the section titled “Placement of your
Wireless Networking Hardware for Optimal Performance” in this manual.
If issues persist even at close range, please contact Dynex Technical Support.
Signal strength is poor.
DX-BUSB Manaul_20071012
Page 32 of 37
Wireless technology is radio-based, which means connectivity and the
throughput performance between devices decreases when the distance between
devices increases. Other factors that will cause signal degradation (metal is
generally the worst culprit) are obstructions such as walls and metal appliances.
As a result, the typical indoor range of your wireless devices will be between 100
to 200 feet. Note also that connection speed may decrease as you move farther
from the wireless router (or access point). Please see the section titled
“Placement of your Wireless Networking Hardware for Optimal Performance” in
this manual.
If issues persist even at close range, please contact Dynex Technical Support.
Why are there two wireless utilities in my system tray? Which one should I
use?
There are several features and advantages to using the Dynex Wireless
Networking Utility over the Windows XP Wireless Zero Configuration utility. We
offer a site survey, detailed link information, and adapter diagnosis, to name a
few.
It’s essential to know which utility is managing your adapter. We recommend
using the Dynex Wireless Networking Utility. To use the Dynex Wireless
Networking Utility, follow the steps below:
Step 1 Right-click on the network status icon in the system tray and select “View
Available Wireless Networks”.
Step 2 Click on the “Advanced” button in the lower left-hand corner of the
“Available Wireless Networks” window.
Step 3 From the “Advanced” tab, uncheck “Use Windows to configure my
wireless network”. Once the box is unchecked, click
“OK” to close the window.
You are now using the Dynex Wireless Networking Utility to configure the
Adapter.
What’s the difference between 802.11b, 802.11g, 802.11a, and Pre-N?
Currently there are four levels of wireless networking standards, which transmit
data at very different maximum speeds. Each is based on the designation for
certifying network standards. The most common wireless networking standard,
802.11b, transmits information at 11Mbps; 802.11a and 802.11g work at 54Mbps;
and Pre-N works at 108Mbps. Pre-N, the precursor to the upcoming 802.11n
DX-BUSB Manaul_20071012
Page 33 of 37
release, promises speeds that exceed 802.11g, and up to twice the wireless
coverage area. See the following chart for more detailed information.
Wireless Comparison Chart
Wireless
Technology
Speed
Frequency
Compatibility
Coverage*
Advantage
802.11b
802.11g
802.11a
Dynex Pre-N
11Mbps
54Mbps
54Mbps
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed band
2.4GHz
Compatible with
802.11g
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed band
2.4GHz
Compatible with
802.11b
5GHz—
uncrowded band
Depends on
interference—
typically 100–200
ft. indoors
Mature—legacy
technology
Depends on
interference—
typically 100–200
ft. indoors
Common—
widespread use
for Internet
sharing
600% faster than
standard
802.11g*
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed band
2.4GHz
Compatible with
802.11g or
802.11b
Up to 800% wider
coverage than
standard
802.11g*
Leading edge—
best coverage
and throughput
Incompatible with
802.11b or
802.11g
Interference
range is typically
50–100 ft.
Less
interference—
great for
multimedia
application
*Distance and connection speeds will vary depending on your networking environment.
Technical Support
DX-BUSB Manaul_20071012
Page 34 of 37
You can find technical support information at www.Dynex.com or
www.Dynex.com/networking. If you want to contact technical support
by phone, please call:
(800) 305-2204
Information
Wi-Fi® Interoperability Certificate
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES
FOR ELECTROMAGNETIC COMPATIBILITY
We, Best Buy,,of 7601 Penn Avenue South Richfield, MN USA 55423-3645,
declare under our sole responsibility that the product,
DX-BUSB, to which this declaration relates, complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device complies with FCC RF Exposure limits set
forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2).
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. This equipment has been SAR-evaluated for use in
laptops (notebooks) with side slot configuration. The average SAR value of CCK
is 0.825W/kg; the average SAR value of OFDM is 0.704W/kg.
Operation of this product marketed in the USA is firmware-limited to 2.4GHz
channel 1 to 11.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy. If this
equipment does cause harmful interference to radio or television reception, which
DX-BUSB Manaul_20071012
Page 35 of 37
can be determined by turning the equipment off and on, the user is encouraged
to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
Modifications
The FCC requires the user to be notified that any changes or modifications to
this device that are not expressly approved by Best Buy may void
the user’s authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210 Industry
Canada. This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil numérique de la classe B conforme á la norme NMB-003
du Canada.
Dynex Corporation Limited Lifetime Product Warranty
What this warranty covers.
Dynex Corporation warrants to the original purchaser of this Dynex product that
the product shall be free of defects in design, assembly, material, or
workmanship.
What the period of coverage is.
Dynex Corporation warrants the Dynex product for the lifetime of the product.
What will we do to correct problems?
Product Warranty.
Dynex will repair or replace, at its option, any defective product free of charge
(except for shipping charges for the product).
What is not covered by this warranty?
All above warranties are null and void if the Dynex product is not provided to
Dynex Corporation for inspection upon Dynex’s request at the sole expense of
the purchaser, or if Dynex Corporation determines that the Dynex product has
DX-BUSB Manaul_20071012
Page 36 of 37
been improperly installed, altered in any way, or tampered with. The Dynex
Product Warranty does not protect against acts of God (other than lightning) such
as flood, earthquake, war, vandalism, theft, normal-use wear and tear, erosion,
depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e.
brownouts or sags), non-authorized program, or system equipment modification
or alteration.
How to get service.
To get service for your Dynex product you must take the following steps:
1.
Contact Dynex Corporation at 501 W. Walnut St., Compton CA 90220,
Attn: Customer Service, or call (800)-223-5546, within 15 days of the
Occurrence. Be prepared to provide the following information:
a. The part number of the Dynex product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2.
Your Dynex Customer Service Representative will then instruct you on
how to forward your receipt and Dynex product and how to proceed with
your claim.
Dynex Corporation reserves the right to review the damaged Dynex product. All
costs of shipping the Dynex product to Dynex Corporation for inspection shall be
borne solely by the purchaser. If Dynex determines, in its sole discretion, that it is
impractical to ship the damaged equipment to Dynex Corporation, Dynex may
designate, in its sole discretion, an equipment repair facility to inspect and
estimate the cost to repair such equipment. The cost, if any, of shipping the
equipment to and from such repair facility and of such estimate shall be borne
solely by the purchaser. Damaged equipment must remain available for
inspection until the claim is finalized. Whenever claims are settled, Dynex
Corporation reserves the right to be subrogated under any existing insurance
policies the purchaser may have.
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF DYNEX
CORPORATION, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR,
EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED
WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitations may not apply to you.
DX-BUSB Manaul_20071012
Page 37 of 37
IN NO EVENT SHALL DYNEX CORPORATION BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES
SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT
OF THE SALE OR USE OF ANY DYNEX PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have other rights, which
may vary from state to state. Some states do not allow the exclusion or limitation of
incidental, consequential, or other damages, so the above limitations may not apply to
you.
DYNEX
Wireless G USB Network Adapter
Dynex Tech Support
(800) 305-2204
© 2005 Dynex Corporation. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed. 54g is a trademark of Broadcom
Corporation in the United States and/or other countries. The mark Wi-Fi is a
registered mark of the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a
certification mark of the Wi-Fi Alliance.
P74471-E

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 37
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9b6caa90-0341-4773-88d4-c18eb24fa455
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2007:10:12 09:32:21+08:00
Modify Date                     : 2007:10:12 09:32:21+08:00
Document ID                     : uuid:bc969387-cc6b-48bb-81da-2fa269a19bf2
Format                          : application/pdf
Title                           : untitled
EXIF Metadata provided by EXIF.tools
FCC ID Filing: K7SF5D7051D

Navigation menu