Belkin F5D7231B Wireless G Plus Router User Manual P74490 D F5D7231 4 man indd

Download:
Mirror Download [FCC.gov]
Document ID	657073
Application ID	P1B4CWAlGsikeKyukZ7DLQ==
Document Description	User manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	155.51kB (1943830 bits)
Date Submitted	2006-05-12 00:00:00
Date Available	2006-05-12 00:00:00
Creation Date	2006-05-10 14:47:06
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2006-05-12 11:19:38
Document Title	P74490-D_F5D7231-4_man.indd
Document Creator	Adobe InDesign CS (3.0.1)

Alternate Setup Method
1.5 Turn your cable or DSL modem on by reconnecting the power
supply to the modem.
Mac or PC computer that was originally
connected to the cable or DSL modem
To power adapter
Existing networking cable
(came with modem)
Network cable
(to computer)
Note: Your Router may have ports in different locations than
depicted in the illustration above.
1.6 Before plugging the power cord into the Router, plug the cord
into the wall, then plug the cord into the Router’s power jack.
1.7 Verify that your modem is connected to the Router by checking
the lights on the front of the Router. The green light labeled
“Modem” should be ON if your modem is connected correctly to
the Router. If it is not, recheck your connections.
1.8 Verify that your computer is connected properly to the Router by
checking the lights labeled “1-4”. The light that corresponds to
the numbered port connected to your computer should be ON
if your computer is connected properly. If it is not, recheck
your connections.
23
10
section
Alternate Setup Method
Step 2
Set up your Computer’s Network Settings to Work
with a DHCP Server
See the section in this User Manual called “Manually Configuring
Network Settings” for directions.
Step 3
Configure the Router Using the Web-Based
Advanced User Interface
Using your Internet browser, you can access the Router’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.1” (you do
not need to type in anything else such as “http://” or “www”). Then
press the “Enter” key.
PLEASE NOTE: If you have difficulty accessing the Router’s
Web-Based Advanced User Interface, go to the section entitled
“Manually Configuring Network Settings”.
Logging into the Router
You will see the Router’s home page in your browser window. The
home page is visible to any user who wants to see it. To make any
changes to the Router’s settings, you have to log in. Clicking the
“Login” button or clicking on any one of the links on the home page
will take you to the login screen. The Router ships with no password
entered. In the login screen, leave the password blank and click the
“Submit” button to log in.
24
Alternate Setup Method
Logging out of the Router
One computer at a time can log into the Router for the purposes
of making changes to the settings of the Router. Once a user has
logged in to make changes, there are two ways that the computer
can be logged out. Clicking the “Logout” button will log the computer
out. The second method is automatic. The login will time out after a
specified period of time. The default login time-out is 10 minutes. This
can be changed from 1 to 99 minutes. For more information, see the
section in this manual entitled “Changing the Login Time-Out Setting”.
Using the Web-Based Advanced User Interface
(10)
(2)
(5)
(4)
(3)
(6)
(1)
(7)
(8)
(9)
1.
Quick-Navigation Links
You can go directly to any of the Router’s UI pages by clicking
directly on these links. The links are divided into logical
categories and grouped by tabs to make finding a particular
setting easier to find. Clicking on the purple header of each tab
will show you a short description of the tab’s function.
25
10
section
The home page is the first page you will see when you access the
Web-Based Advanced User Interface (UI). The home page shows you
a quick view of the Router’s status and settings. All advanced setup
pages can be reached from this page.
Alternate Setup Method
(10)
(2)
(5)
(4)
(3)
(6)
(1)
(7)
(8)
(9)
2.
Home Button
The “Home” button is available in every page of the UI. Pressing
this button will take you back to the home page.
3.
Internet Status Indicator
This indicator is visible in all pages of the UI, indicating the
connection status of the Router. When the indicator says
“connection OK” in GREEN, the Router is connected to the
Internet. When the Router is not connected to the Internet, the
indicator will read “no connection” in RED. The indicator is
automatically updated when you make changes to the settings of
the Router.
4.
Login/Logout Button
This button enables you to log in and out of the Router with the
press of one button. When you are logged into the Router, this
button will change to read “Logout”. Logging into the Router will
take you to a separate login page where you will need to enter a
password. When you are logged into the Router, you can make
changes to the settings. When you are finished making changes,
you can log out of the Router by clicking the “Logout” button. For
more information about logging into the Router, see the section
called “Logging into the Router”.
26
Alternate Setup Method
5.
6.
Help Button
The “Help” button gives you access to the Router’s help pages.
Help is also available on many pages by clicking “more info” next
to certain sections of each page.
LAN Settings
7.
Features
Shows the status of the Router’s NAT, firewall, and wireless
features. Changes can be made to the settings by clicking on any
one of the links or by clicking the “Quick Navigation” links on the
left side of the screen.
8.
Internet Settings
Shows the settings of the Internet/WAN side of the Router that
connects to the Internet. Changes to any of these settings can
be made by clicking on the links or by clicking on the
“Internet/WAN” “Quick Navigation” link on the left side of
the screen.
9.
Version Info
Shows the firmware version, boot-code version, hardware
version, and serial number of the Router.
10. Page Name
The page you are on can be identified by this name. This User
Manual will sometimes refer to pages by name. For instance
“LAN > LAN Settings” refers to the “LAN Settings” page.
27
10
section
Shows you the settings of the Local Area Network (LAN) side of
the Router. Changes can be made to the settings by clicking on
any one of the links (IP Address, Subnet Mask, DHCP Server) or
by clicking the “LAN” “Quick Navigation” link on the left side of
the screen.
Alternate Setup Method
Step 4
Configure your Router for Connection to your Internet
Service Provider (ISP)
The “Internet/WAN” tab is where you will set up your Router to
connect to your Internet Service Provider (ISP). The Router is capable
of connecting to virtually any ISP’s system provided you have
correctly configured the Router’s settings for your ISP’s connection
type. Your ISP connection settings are provided to you by your ISP.
To configure the Router with the settings that your ISP gave you,
click “Connection Type” (A) on the left side of the screen. Select
the connection type you use. If your ISP gave you DNS settings,
clicking “DNS” (B) allows you to enter DNS address entries for ISPs
that require specific settings. Clicking “MAC address” (C) will let you
clone your computer’s MAC address or type in a specific WAN MAC
address, if required by your ISP. When you have finished making
settings, the “Internet Status” indicator will read “connection OK” if
your Router is set up properly.
(A)
(B)
(C)
28
Alternate Setup Method
Setting your Connection Type
From the “Connection Type” page, you can select the type of connection you
use. Select the type of connection you use by clicking the button (1) next
to your connection type and then clicking “Next” (2).
(2)
10
29
section
(1)
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type
to Dynamic IP
A dynamic connection type is the most common connection type
used with cable modems. Setting the connection type to “dynamic” in
many cases is enough to complete the connection to your ISP. Some
dynamic connection types may require a host name. You can enter
your host name in the space provided if you were assigned one. Your
host name is assigned by your ISP. Some dynamic connections may
require that you clone the MAC address of the PC that was originally
connected to the modem.
(1)
(2)
(3)
1.
Host Name
This space is provided to enter a host name that needs to be
visible to your ISP. Enter your host name here and click “Apply
Changes” (3). If your ISP did not assign you a host name, or you
are not sure, leave this blank.
2.
Change WAN MAC Address
If your ISP requires a specific MAC address to connect to the
service, you can enter a specific MAC address or clone the
current computer’s MAC address through this link.
30
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type
to Static IP
(1)
(2)
(3)
(4)
1.
IP Address
Provided by your ISP. Enter your IP address here.
2.
Subnet Mask
Provided by your ISP. Enter your subnet mask here.
3.
ISP Gateway Address
Provided by your ISP. Enter the ISP gateway address here.
31
10
section
A static IP address connection type is less common than other connection
types. If your ISP uses static IP addressing, you will need your IP address,
subnet mask, and ISP gateway address. This information is available from
your ISP or on the paperwork that your ISP left with you. Type in your
information, then click “Apply Changes” (4). After you apply the changes,
the “Internet Status” indicator will read “connection OK” if your Router is
set up properly.
Alternate Setup Method
Setting your ISP Connection Type to PPPoE
Most DSL providers use PPPoE as the connection type. If you use a
DSL modem to connect to the Internet, your ISP may use PPPoE to
log you into the service. If you have an Internet connection in your
home or small office that doesn’t require a modem, you may also
use PPPoE.
(1)
(2)
(3)
(6)
(4)
(5)
Your connection type is PPPoE if:
1) Your ISP gave you a user name and password, which is required to
connect to the Internet;
2) Your ISP gave you software such as WinPOET or Enternet300 that
you use to connect to the Internet; or
3) You have to double-click on a desktop icon other than your browser
to get on the Internet.
32
Alternate Setup Method
1.
User Name
This space is provided to type in your user name that was
assigned by your ISP.
2.
3.
Password
Type in your password and re-type it into the “Retype Password”
box to confirm it.
Service Name
MTU
The MTU setting should never be changed unless your ISP gives
you a specific MTU setting. Making changes to the MTU setting
can cause problems with your Internet connection including
disconnection from the Internet, slow Internet access, and
problems with Internet applications working properly.
5.
Disconnect after X...
The “Disconnect” feature is used to automatically disconnect the
Router from your ISP when there is no activity for a specified
period of time. For instance, placing a check mark next to this
option and entering “5” into the minute field will cause the Router
to disconnect from the Internet after five minutes of no Internet
activity. This option should be used if you pay for your Internet
service by the minute.
33
10
section
A service name is rarely required by an ISP. If you are not sure if
your ISP requires a service name, leave this blank.
4.
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only]. Some ISPs require a connection using
PPTP protocol, a type of connection most common in European
countries. This sets up a direct connection to the ISP’s system. Type
in the information provided by your ISP in the space provided. When
you have finished, click “Apply Changes” (9). After you apply the
changes, the “Internet Status” indicator will read “connection OK” if
your Router is set up properly.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
1.
PPTP Account
Provided by your ISP. Enter your PPTP account name here.
2.
PPTP Password
Type in your password and retype it into the “Retype Password”
box to confirm it.
3.
Host Name
Provided by your ISP. Enter your host name here.
4.
Service IP Address
Provided by your ISP. Enter your service IP address here.
34
Alternate Setup Method
5.
My IP Address
My Subnet Mask
Provided by your ISP. Enter the IP address here.
Provided by your ISP. Enter the IP address here.
7.
Connection ID (optional)
Provided by your ISP. If your ISP did not give you a connection
ID, leave this blank.
Disconnect after X….
The “Disconnect” feature is used to automatically disconnect the
Router from your ISP when there is no activity for a specified
period of time. For instance, placing a check mark next to this
option and entering “5” into the minute field will cause the Router
to disconnect from the Internet after five minutes of no Internet
activity. This option should be used if you pay for your Internet
service by the minute.
10
35
section
8.
Alternate Setup Method
Setting your Connection Type if you are a Telstra® BigPond User
[Australia Only]. Your user name and password are provided to you
by Telstra BigPond. Enter this information below. Choosing your state
from the drop-down menu (6) will automatically fill in your login server
IP address. If your login server address is different than the one
provided here, you may manually enter the login server IP address by
placing a check in the box next to “User decide login server manually”
(4) and type in the address next to “Login Server” (5). When you
have entered all of your information, click “Apply Changes” (7).
After you apply the changes, the “Internet Status” indicator will read
“connection OK” if your Router is set up properly.
(1)
(2)
(3)
(6)
(4)
(5)
(7)
1.
Select your State
2.
User Name
Select your state from the drop-down menu (6). The “Login
Server” box will automatically be filled in with an IP address.
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address. See “User decide login server manually” (4).
Provided by your ISP. Type in your user name here.
36

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2006:05:12 11:19:38+02:00
Create Date                     : 2006:05:10 14:47:06+08:00
Metadata Date                   : 2006:05:12 11:19:38+02:00
Format                          : application/pdf
Document ID                     : uuid:2644e6fb-0e8c-4c64-b8b4-b95a180286c5
Instance ID                     : uuid:cd797584-a1f3-462b-8fe7-393cafe68228
Page Count                      : 14
Creator                         : Adobe InDesign CS (3.0.1)
Producer                        : Adobe PDF Library 6.0
Title                           : P74490-D_F5D7231-4_man.indd

EXIF Metadata provided by EXIF.tools