Belkin F5D7634V2 G Wireless Modem Router User Manual Manual 1 Part 2

Download:
Mirror Download [FCC.gov]
Document ID	1158805
Application ID	GPtiAZ7gPVqnz6AsERmGSA==
Document Description	Manual 1 Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	124.17kB (1552123 bits)
Date Submitted	2009-08-25 00:00:00
Date Available	2009-08-25 00:00:00
Creation Date	2009-07-22 13:09:50
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2009-08-25 17:56:12
Document Title	Manual 1 Part 2
Document Creator	Adobe InDesign CS3 (5.0.1)

Manually Configuring your Router
Table of Contents
sections
10
Saving/Backing up Current Settings
You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or
changed. It is recommended that you back up your current configuration before performing a firmware update.
1.	
2.	
Click “Save”. A window called “File Download” will open.
Click “Save”.
G Wireless Modem Router
49
A window will open that allows you to select the location in which
to save the configuration file. Select a location. There are no
restrictions on the file name; however, be sure to name the file
so you can locate it yourself later. When you have selected the
location and entered the file name, click “Save”.
Manually Configuring your Router
Table of Contents
3.	
sections
10
Restore Previous Settings
When the save is complete, you will see the window below. Click
“Close”. The configuration is now saved.
G Wireless Modem Router
This option will allow you to restore a previously saved configuration.
50
1.	
Click “Browse”. A window will open that allows you to select the
location of the configuration file. Locate the configuration file,
“config.bin”, and double-click on it.
2.	
Then, click “Open”.
Manually Configuring your Router
Table of Contents
sections
10
Updating Firmware
Checking for a New Version of Firmware
From time to time, Belkin may release new versions of the Router’s
firmware. Firmware updates contain feature improvements and fixes to
problems that may have existed. When Belkin releases new firmware,
you can download the firmware from the Belkin website and update your
Router’s firmware to the latest version.
The “Check Firmware” (1) button allows you to instantly check for a new
version of firmware. When you click the button, a new browser window
will appear informing you that either no new firmware is available or that
there is a new version available. If a new version is available, you will
have the option to download it.
(1)
(2)
G Wireless Modem Router
51
Manually Configuring your Router
Table of Contents
sections
10
Downloading a New Version of Firmware
If you click the “Check Firmware” button and a new version of firmware is available, you will see a screen similar to the one below.
1.	
To download the new version of firmware, click “Download”.
2.	
A window will open that allows you to select the location where you
want to save the firmware file. Select a location. You can name the
file anything you want, or use the default name. Be sure to locate
the file in a place where you can locate it yourself later. When you
have selected the location, click “Save”.
G Wireless Modem Router
3.	
52
When the save is complete, you will see the following window.
Click “Close”. The download of the firmware is complete. To
update the firmware, follow the next steps in “Updating the
Router’s Firmware”.
Manually Configuring your Router
Table of Contents
sections
10
Updating the Router’s Firmware
1.	
In the “Firmware Update” page, click “Browse” (2). A window
will open that allows you to select the location of the firmware
update file.
2.	
Browse to the firmware file you downloaded. Select the file by
double-clicking on the file name.
3.	
The “Update Firmware” box will now display the location and name
of the firmware file you just selected. Click “Update”.
4.	
You will be asked if you are
sure you want to continue.
Click “OK”.
5.	
You will see one more message. This message tells you that the
Router may not respond for as long as one minute as the firmware
is loaded into the Router and the Router is rebooted. Click “OK”.
A 60-second countdown will appear on the screen. When the
countdown reaches zero, the Router firmware update will be complete.
The Router home page should appear automatically. If not, type in
the Router’s address (default = 192.168.2.1) into the navigation bar of
your browser.
G Wireless Modem Router
53
Manually Configuring your Router
Table of Contents
sections
10
System Settings
Setting the Time and Time Zone
The “System Settings” page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on
and off the UPnP function of the Router.
The Router keeps time by connecting to a Simple Network Time
Protocol (SNTP) server. This allows the Router to synchronize the system
clock to the global Internet. The synchronized clock in the Router is
used to record the security log and control client filtering. Select the
time zone in which you reside. If you reside in an area that observes
daylight saving time, then place a check mark in the box next to
“Daylight Savings”. The system clock may not update immediately. Allow
at least 15 minutes for the Router to contact the time servers on the
Internet and get a response. You cannot set the clock yourself. You now
have the option to select a primary and a backup NTP server to keep
your Router’s clock synchronized with different NTP time servers on the
Internet. Select your desired NTP server from the drop-down boxes, or
simply keep it as is.
Setting or Changing the Administrator Password
The Router ships with NO password entered. If you wish to add a
password for greater security, you can set a password here. Write down
your password and keep it in a safe place, as you will need it if you need
to log in to the Router in the future. It is also recommended that you
set a password if you plan to use the remote-management feature of
your Router.
Changing the Login Time-Out Setting
The login time-out option allows you to set the period of time that you
can be logged into the Router’s advanced setup interface. The timer
starts when there has been no activity. For example, you have made
some changes in the advanced setup interface, then left your computer
alone without clicking “Logout”. Assuming the time-out is set to 10
minutes, then 10 minutes after you leave, the login session will expire.
You will have to log in to the Router again to make any more changes.
The login time-out option is for security purposes and the default is
set to 10 minutes. Note: Only one computer can be logged in to the
Router’s advanced setup interface at one time.
G Wireless Modem Router
54
Manually Configuring your Router
Table of Contents
sections
10
Enabling Remote Management
Before you enable this advanced feature of your Belkin Router, MAKE
SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote
management allows you to make changes to your Router’s settings from
anywhere on the Internet.
Before you enable this function, it is STRONGLY RECOMMENDED that
you set your administrator password. Leaving the password empty
will potentially open your Router to intrusion. The remote-access port
defaults to port 8080. You can choose a different port by entering a new
port number in the “remote port” field. Click on the “Apply Changes”
button to save your settings.
There are two methods of remotely managing the Router. The first
is to allow access to the Router from anywhere on the Internet by
selecting, “Any IP address can remotely manage the Router”. By typing
in your WAN IP address from any computer on the Internet, you will be
presented with a login screen where you need to type in the password
of your Router. The second method is to allow a specific IP address
only to remotely manage the Router. This is more secure, but less
convenient. To use this method, enter the IP address from which you
know you will be accessing the Router in the space provided and select,
“Only this IP address can remotely manage the Router”.
G Wireless Modem Router
55
Manually Configuring your Router
Table of Contents
sections
10
Enabling/Disabling Network Address Translation (NAT)
Enabling/Disabling Auto Firmware Update
Note: This advanced feature should be employed by advanced users
only. Before enabling this function, MAKE SURE YOU HAVE SET THE
ADMINISTRATOR PASSWORD. NAT is the method by which the Router
shares the single IP address assigned by your ISP with the other
computers on your network. This function should only be used if your
ISP assigns you multiple IP addresses or you need NAT disabled for an
advanced system configuration. If you have a single IP address and you
turn off NAT, the computers on your network will not be able to access
the Internet. Other problems may also occur. Turning off NAT will disable
your firewall functions.
This innovation provides the Router with the built-in capability to
automatically check for a new version of firmware and alert you that
the new firmware is available. When you log into the Router’s WebBased Advanced User Interface, the Router will perform a check to see
if new firmware is available. If so, you will be notified. You can choose
to download the new version or ignore it. The Router ships with this
feature disabled. If you want to disable it, select “Enable” and click
“Apply Changes”.
Enabling/Disabling Universal Plug-and-Play (UPnP)
UPnP is yet another advanced feature offered by your Belkin Router. It is
a technology that offers seamless operation of voice messaging, video
messaging, games, and other applications that are UPnP-compliant.
Some applications require the Router’s firewall to be configured in a
specific way to operate properly. This usually requires opening TCP and
UDP ports, and in some instances, setting trigger ports. An application
that is UPnP-compliant has the ability to communicate with the Router,
basically “telling” the Router which way it needs the firewall configured.
The Router ships with the UPnP feature disabled. If you are using any
applications that are UPnP-compliant, and wish to take advantage of the
UPnP features, you can enable the UPnP feature. Simply select “Enable”
in the “UPnP Enabling” section of the “Utilities” page. Click “Apply
Changes” to save the change.
G Wireless Modem Router
56
Manually Configuring Network Adapters
Table of Contents
sections
10
Setting up your Computers
In order for your computer to properly communicate with your Router, you will need to change your computer’s “TCP/IP/Ethernet” settings to “Obtain
an IP address automatically/Using DHCP”. This is normally the default setting in most home computers.
You can set up the computer that is connected to the ADSL modem FIRST using these steps. You can also use these steps to add computers to your
Router after the Router has been set up to connect to the Internet.
Windows XP, 2000, or NT
1.	
Click “Start”, “Settings”, then “Control Panel”.
2.	
Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network” icon (Windows XP).
3.	
Right-click on the “Local Area Connection” associated
with your network adapter and select “Properties” from the
drop-down menu.
4.	
In the “Local Area
Connection Properties”
window, click “Internet
Protocol (TCP/IP)” and click
the “Properties” button. The
following screen will appear:
G Wireless Modem Router
57
5.	
If “Use the following IP
address” (2) is selected,
your Router will need to
be set up for a static IP
connection type. Write the
address information in the
table below. You will need
to enter this information into
the Router.
6.	
If not already selected, select “Obtain an IP address automatically”
(1) and “Obtain DNS server address automatically” (3). Click
“OK”. Your network adapter(s) are now configured for use with
the Router.
Manually Configuring Network Adapters
Table of Contents
sections
10
Windows 98SE or Me
1.	
Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu.
2.	
Select “TCP/IP -> settings”
for your installed network
adapter. You will see the
following window.
G Wireless Modem Router
(1)
(2)
3.	
If “Specify an IP address”
is selected, your Router will
need to be set up for a static
IP connection type. Write
the address information
in the table below. You
will need to enter this
information into the Router.
4.	
Write down the IP address and subnet mask from the “IP
Address” tab (3).
5.	
Click the “Gateway” tab (2). Write down the gateway address in
the chart.
6.	
Click the “DNS Configuration” tab (1). Write down the DNS
address(es) in the chart.
7.	
If not already selected, select “Obtain an IP address automatically”
on the “IP Address” tab. Click “OK”. Restart the computer. When
the computer restarts, your network adapter(s) are now configured
for use with the Router. Set up the computer that is connected to
the cable or DSL modem by FIRST using these steps. You can also
use these steps to add computers to your Router after the Router
has been set up to connect to the Internet.
(3)
58
Manually Configuring Network Adapters
Table of Contents
sections
10
Mac OS up to 9.x
In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP.
1.	
Pull down the Apple menu. Select “Control Panels” and select
“TCP/IP”.
2.	
You will see the TCP/IP control panel. Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu (1).
4.	
If not already set, at “Configure:”, choose “Using DHCP Server”.
This will tell the computer to obtain an IP address from the Router.
5.	
Close the window. If you made any changes, the following window
will appear. Click “Save”.
(1)
(2)
3.	
Next to “Configure” (2),
if “Manually” is selected,
your Router will need to
be set up for a static IP
connection type. Write the
address information in the
table below. You will need
to enter this information into
the Router.
Restart the computer. When the computer restarts, your network
settings are now configured for use with the Router.
G Wireless Modem Router
59
Manually Configuring Network Adapters
Table of Contents
sections
10
Mac OS X
3.	
1.	
Click on the “System
Preferences” icon.
2.	
Select “Network” (1) from the “System Preferences” menu.
Select “Built-in Ethernet” (2) next to “Show” in the
“Network” menu.
(3)
(2)
(5)
(4)
(1)
G Wireless Modem Router
60
Manually Configuring Network Adapters
Table of Contents
4.	
sections
Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see
“Manually” or “Using DHCP”. If you do not, check the PPPoE tab
(5) to make sure that “Connect using PPPoE” is NOT selected. If it
is, you will need to configure your Router for a PPPoE connection
type using your user name and password.
10
5.	
If “Manually” is selected,
your Router will need to
be set up for a static IP
connection type. Write the
address information in the
table below. You will need
to enter this information into
the Router.
6.	
If not already selected, select “Using DHCP” next to “Configure”
(4), then click “Apply Now”.
Your network adapter(s) are now configured for use with the Router.
G Wireless Modem Router
61
Recommended Web Browser Settings
Table of Contents
sections
In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the
Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section.
Microsoft Internet Explorer 4.0 or Higher
1.	
2.	
Start your web browser. Select “Tools” then “Internet Options”.
In the “Internet Options” screen, there are three selections: “Never
dial a connection”, “Dial whenever a network connection is not
present”, and “Always dial my default connection”. If you can make
a selection, select, “Never dial a connection”. If you cannot make a
selection, go to the next step.
G Wireless Modem Router
62
3.	
Under the “Internet
Options” screen, click on
“Connections” and select
“LAN Settings…”.
4.	
Make sure there are no
check marks next to any
of the displayed options:
“Automatically detect
settings”, “Use automatic
configuration script”, and
“Use a proxy server”.
Click “OK”. Then, click
“OK” again in the “Internet
Options” page.
10
Recommended Web Browser Settings
Table of Contents
sections
Netscape® Navigator ® 4.0 or Higher
1.	
Start Netscape. Click on “Edit”, then “Preferences”.
2.	
In the “Preferences” window, click on “Advanced”, then select
“Proxies”. In the “Proxies” window, select “Direct connection to
the Internet”.
G Wireless Modem Router
63
10
Troubleshooting
Table of Contents
sections
Problem:
Problem:
The ADSL LED is not on.
My connection type is static IP address. I cannot connect to
the Internet.
Solution:
1.	
Check the connection between the Router and ADSL line. Make
sure the cable from the ADSL line is connected to the port on the
Router labeled “DSL Line”.
2.	
Make sure the Router has power.
The
panel should be illuminated.
10
Solution:
Since your connection type is static IP address, your ISP must assign
you the IP address, subnet mask, and gateway address. Instead of using
the Wizard, go to “Connection Type”, and then select your connection
type. Click “Next”, select “Static IP”, and enter your IP address, subnet
mask, and default gateway information.
Power LED on the front
Problem:
Problem:
The Internet LED is not on.
I’ve forgotten or lost my password.
Solution:
Solution:
1.	
Make sure the cable from the ADSL line is connected to the port on
the Router labeled “DSL Line” and the
ADSL LED is on.
Press and hold the “Reset” button on the rear panel for at least six
seconds to restore the factory defaults.
2.	
Make sure you have the correct VPI/VCI, user name, and password
from your ISP provider.
G Wireless Modem Router
64
Troubleshooting
Table of Contents
sections
10
Problem:
Problem:
My wireless PC cannot connect to the Router.
I can’t connect to the Internet wirelessly.
Solution:
Solution:
1.	
Make sure the wireless PC has the same SSID settings as the
Router, and you have the same security settings on the clients
such as WPA or WEP encryption.
If you are unable to connect to the Internet from a wireless computer,
please check the following items:
2.	
Make sure the distance between the Router and wireless PC are
not too far away.
1.	
Look at the lights on your Router. If you’re using a Belkin Router,
the lights should be as follows:
• The “Power” light should be on.
• The “Connected” light should be on, and not blinking.
• The “WAN” light should be either on or blinking.
Problem:
The wireless network is often interrupted.
2.	
Open your wireless utility software by clicking on the icon in the
system tray at the bottom right-hand corner of the screen. If you’re
using a Belkin Wireless Card, the tray icon should look like this (the
icon may be red or green):
3.	
The exact window that opens will vary depending on the model of
wireless card you have; however, any of the utilities should have
a list of “Available Networks”—those wireless networks it can
connect to.
Solution:
1.	
Move your wireless PC closer to the Router to find a better signal.
2.	
There may also be interference, possibly caused by a microwave
oven or 2.4GHz cordless phones. Change the location of the
Router or use a different wireless channel.
Does the name of your wireless network appear in the results?
Yes, my network name is listed—go to the troubleshooting solution
titled “I can’t connect to the Internet wirelessly, but my network name
is listed”.
No, my network name is not listed—go to the troubleshooting solution
titled “I can’t connect to the Internet wirelessly, and my network name is
not listed”.
G Wireless Modem Router
65
Troubleshooting
Table of Contents
sections
10
Problem:
Problem:
I can’t connect to the Internet wirelessly, but my network name is listed.
I can’t connect to the Internet wirelessly, and my network name is
not listed.
Solution:
Solution:
If the name of your network is listed in the “Available Networks” list,
please follow the steps below to connect wirelessly:
1.	
Click on the correct network name in the “Available Networks” list.
If the network has security (encryption) enabled, you will need to
enter the network key. For more information regarding security, see
the page entitled “Changing the Wireless Security Settings”.
2.	
Within a few seconds, the tray icon in the lower left-hand corner of
your screen should turn green, indicating a successful connection
to the network.
If the correct network name is not listed under “Available Networks” in
the wireless utility, please attempt the following troubleshooting steps:
1.	
Temporarily move computer, if possible, five to 10 feet from the
Router. Close the wireless utility, and re-open it. If the correct
network name now appears under “Available Networks”, you may
have a range or interference problem. Please see the suggestions
discussed in Appendix B entitled “Important Factors for Placement
and Setup”.
2.	
Using a computer that is connected to the Router via a network
cable (as opposed to wirelessly), ensure that “Broadcast SSID” is
enabled. This setting is found on the Router’s wireless “Channel
and SSID” configuration page.
If you are still unable to access the Internet after completing these steps,
please contact Belkin Technical Support.
G Wireless Modem Router
66
Troubleshooting
Table of Contents
sections
10
Problem:
My wireless network performance is inconsistent.
Data transfer is sometimes slow.
Signal strength is poor.
Difficulty establishing and/or maintaining a Virtual Private Network (VPN) connection.
Solution:
Wireless technology is radio-based, which means connectivity and
the throughput performance between devices decreases when the
distance between devices increases. Other factors that will cause signal
degradation (metal is generally the worst culprit) are obstructions such
as walls and metal appliances. As a result, the typical indoor range of
your wireless devices will be between 100 to 200 feet. Note also that
connection speed may decrease as you move farther from the Router or
Access Point.
Limiting the wireless transmit rate - Limiting the wireless transmit
rate can help improve the maximum wireless range, and connection
stability. Most wireless cards have the ability to limit the transmission
rate. To change this property, go to the Windows Control Panel, open
“Network Connections” and double-click on your wireless card’s
connection. In the “Properties” dialog, select the “Configure” button
on the “General” tab (Windows 98 users will have to select the wireless
card in the list box and then click “Properties”), then choose the
“Advanced” tab and select the rate property. Wireless client cards
are usually set to automatically adjust the wireless transmit rate for
you, but doing so can cause periodic disconnects when the wireless
signal is too weak; as a rule, slower transmission rates are more stable.
Experiment with different connection rates until you find the best one
for your environment; note that all available transmission rates should
be acceptable for browsing the Internet. For more assistance, see your
wireless card’s user manual.
In order to determine if wireless issues are related to range, we suggest
temporarily moving the computer, if possible, five to 10 feet from
the Router.
Changing the wireless channel - Depending on local wireless traffic
and interference, switching the wireless channel of your network can
improve performance and reliability. The default channel the Router
is shipped with is channel 11, you may choose from several other
channels depending on your region; see the section entitled “Changing
the Wireless Channel” on page 32 for instructions on how to choose
other channels.
G Wireless Modem Router
67
Troubleshooting
Table of Contents
sections
10
Problem:
How do I extend the range of my wireless network?
Solution:
Belkin recommends using one of the following products to extend wireless network coverage throughout large homes or offices:
•
•
Wireless Access Point: A wireless access point can effectively
double the coverage area of your wireless network. An access
point is typically placed in the area not currently covered by
your wireless router, and connected to the router using either an
Ethernet cable, or through your home’s power lines using two
powerline Ethernet adapters.
For 802.11g (54g) wireless networks, Belkin offers a Wireless Range
Extender/Access Point that can be connected wirelessly to a Belkin
802.11g Wireless Router, without requiring an Ethernet cable or
powerline Ethernet adapters.
These Belkin products are available at your local retailer, or can be ordered from Belkin directly.
For network/range extension information, please visit: www.belkin.com/networking to find out more about:
Wireless G Range Extender/Access Point (F5D7132)
G Wireless Modem Router
68
Troubleshooting
Table of Contents
sections
10
Problem:
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Router or Belkin Access Point.
Solution:
1.	
Log into your Wireless Router or Access Point.
6.	
2.	
Open your web browser and type in the IP address of the Wireless
Router or Access Point. (The Router default is 192.168.2.1, the
802.11g Access Point is 192.168.2.254.) Log into your Router by
clicking on the “Login” button in the top right-hand corner of the
screen. You will be asked to enter your password. If you never set a
password, leave the password field blank and click “Submit”.
WARNING: If you are configuring the Wireless Router or Access Point
from a computer with a wireless client, you will need to ensure that
security is turned on for this wireless client. If this is not done, you will
lose your wireless connection.
3.	
Click the “Wireless” tab on the left of your screen. Select the
“Encryption” or “Security” tab to get to the security settings page.
4.	
Select “128-bit WEP” from the drop-down menu.
5.	
After selecting your WEP encryption mode, you can type in your
hex WEP key manually, or you can type in a passphrase in the
“Passphrase” field and click “Generate” to create a WEP key from
the passphrase. Click “Apply Changes” to finish. You must now set
all of your clients to match these settings. A hex (hexadecimal) key
is a mixture of numbers and letters from A–F and 0–9. For 128-bit
WEP, you need to enter 26 hex keys.
Note to Mac users: Original Apple AirPort products support 64-bit
encryption only. Apple AirPort 2 products can support 64-bit or 128-bit
encryption. Please check your Apple AirPort product to see which
version you are using. If you cannot configure your network with 128-bit
encryption, try 64-bit encryption.
For example: C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key
G Wireless Modem Router
Click “Apply Changes” to finish. Encryption in the Wireless Router
is now set. Each of your computers on your wireless network will
now need to be configured with the same security settings.
69
Troubleshooting
Table of Contents
sections
10
Problem:
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Wireless Card.
Solution:
The Wireless Card must use the same key as the Wireless Router or Access Point. For instance, if your Wireless Router or Access Point uses the key
00112233445566778899AABBCC, then the Wireless Card must be set to the exact same key.
1.	
Double-click the “Signal Indicator” icon to bring up the “Wireless
Network” screen.
2.	
The “Advanced” button will allow you to view and configure more
options of the card.
3.	
Once the “Advanced” button is clicked, the Belkin Wireless LAN
Utility will appear. This Utility will allow you to manage all the
advanced features of the Belkin Wireless Card.
4.	
Under the “Wireless Network Properties” tab, select a
network name from the “Available networks” list and click the
“Properties” button.
5.	
Under “Data Encryption” select “WEP”.
6.	
Ensure the check box “The key is provided for me automatically” at
the bottom is unchecked. If you are using this computer to connect
to a corporate network, please consult your network administrator
if this box needs to be checked.
G Wireless Modem Router
7.	
Type your WEP key in the “Network key” box.
Important: A WEP key is a mixture of numbers and letters from
A–F and 0–9. For 128-bit WEP, you need to enter 26 keys. This
network key needs to match the key you assign to your Wireless
Router or Access Point.
For example: C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key
8.	
Click “OK”, and then “Apply” to save the settings.
If you are NOT using a Belkin Wireless Card, please consult the
manufacturer for that card’s user manual.
70
Troubleshooting
Table of Contents
sections
10
Problem:
Problem:
Do Belkin products support WPA?
I am having difficulty setting up Wi-Fi Protected Access (WPA) security
on a Belkin Wireless Router or Belkin Access Point for a home network.
Solution:
Solution:
Note: To use WPA security, all your clients must be upgraded to drivers
and software that support it. At the time of this FAQ publication, a
security patch download is available, for free, from Microsoft. This patch
works only with the Windows XP operating system.
1.	
From the “Security Mode” drop-down menu, select “WPA-PSK
(no server)”.
Download the patch here:
2.	
http://www.microsoft.com/downloads/details.aspx?FamilyID=009d8425ce2b-47a4-abec-274845dc9e91&displaylang=en
For “Encryption Technique”, select “TKIP” or “AES”. This setting
will have to be identical on the clients that you set up.
3.	
Enter your pre-shared key (PSK). This can be from eight to 63
characters and can be letters, numbers, or symbols or spaces.
This same key must be used on all of the clients that you set up.
For example, your PSK might be something like: “Smith family
network key”.
4.	
Click “Apply Changes” to finish. You must now set all clients to
match these settings.
You also need to download the latest driver for your Belkin 802.11g
Wireless Desktop Network Card or Notebook Network Card from the
Belkin support site. Other operating systems are not supported at this
time. Microsoft’s patch only supports devices with WPA-enabled drivers
such as Belkin 802.11g products.
Download the latest driver at
http://www.belkin.com/uk/support/tech/index.asp
G Wireless Modem Router
71
Troubleshooting
Table of Contents
sections
10
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Router or Belkin Access Point for a business.
Solution:
If your network uses a radius server to distribute keys to the clients, use this setting. This is typically used in a business environment.
1.	
From the “Security Mode” drop-down menu, select “WPA
(with server)”.
2.	
For “Encryption Technique”, select “TKIP” or “AES”. This setting
will have to be identical on the clients that you set up.
3.	
Enter the IP address of the radius server into the “Radius
Server” fields.
G Wireless Modem Router
72
4.	
Enter the radius key into the “Radius Key” field.
5.	
Enter the key interval. Key interval is how often the keys are
distributed (in packets).
6.	
Click “Apply Changes” to finish. You must now set all clients to
match these settings.
Troubleshooting
Table of Contents
sections
10
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Card for a home network.
Solution:
Clients must use the same key that the wireless router or access point uses. For instance if the key is “Smith Family Network Key” in the wireless
router or access point, the clients must also use that same key.
1.	
Double-click the “Signal Indicator” icon to bring up the “Wireless
Network” screen.
2.	
The “Advanced” button will allow you to view and configure more
options of the Card.
3.	
Once the “Advanced” button is clicked, the Belkin Wireless LAN
Utility will appear. This Utility will allow you to manage all the
advanced features of the Belkin Wireless Card.
4.	
Under the “Wireless Network Properties” tab, select a
network name from the “Available networks” list and click the
“Properties” button.
5.	
Under “Network Authentication” select “WPA-PSK (no server).
6.	
Type your WPA key in the “Network key” box.
Important: WPA-PSK is a mixture of numbers and letters from
A–Z and 0–9. For WPA-PSK you can enter eight to 63 characters. This
network key needs to match the key you assign to your wireless router
or access point.
7.	
G Wireless Modem Router
73
Click “OK, then “Apply” to save the settings.
Troubleshooting
Table of Contents
sections
10
Problem:
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA) security
on a Belkin Wireless Card for a business.
I am having difficulty setting up Wi-Fi Protected Access (WPA) security
and I am NOT using a Belkin Wireless Card for a home network.
Solution:
Solution:
1.	
Double-click the “Signal Indicator” icon to bring up the “Wireless
Network” screen.
2.	
The “Advanced” button will allow you to view and configure more
options of the Card.
If you are not using a Belkin Wireless Desktop or Wireless Notebook
Network Card that is not equipped with WPA-enabled software, a
file from Microsoft called “Windows XP Support Patch for Wireless
Protected Access” is available for free download. Download the patch
from Microsoft by searching the knowledge base for Windows XP WPA.
3.	
Once the “Advanced” button is clicked, the Belkin Wireless LAN
Utility will appear. This Utility will allow you to manage all the
advanced features of the Belkin Wireless Card.
4.	
Under the “Wireless Network Properties” tab, select a
network name from the “Available networks” list and click the
“Properties” button.
5.	
Under “Network Authentication” select “WPA”.
6.	
In the “Authentication” tab, select the settings that are indicated by
your network administrator.
7.	
Click “OK, then “Apply” to save the settings.
G Wireless Modem Router
Note: The file that Microsoft has made available works only with
Windows XP. Other operating systems are not supported at this time.
You also need to ensure that the wireless card manufacturer supports
WPA and that you have downloaded and installed the latest driver from
their support site.
Supported Operating Systems:
• Windows XP Professional
• Windows XP Home Edition
74
Troubleshooting
Table of Contents
sections
10
Enabling WPA-PSK (no server)
1.	
Under Windows XP, click “Start > Control Panel >
Network Connections”.
2.	
Right-clicking on the “Wireless Networks” tab will display the
following screen. Ensure the “Use Windows to configure my
wireless network settings” box is checked.
3.	
Under the “Wireless Networks” tab, click the “Configure” button.
4.	
For a home or small business user, select “WPA-PSK” under
“Network Administration”.
Select “TKIP” or “AES” under “Date Encryption”. This setting will
have to be identical to the wireless router or access point that you
set up.
6.	
Type in your encryption key in the “Network Key” box.
Important: Enter your PSK. This can be from eight to 63
characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
Note: Select WPA (with radius server) if you are using this computer to
connect to a corporate network that supports an authentication server
such as a radius server. Please consult your network administrator for
further information.
G Wireless Modem Router
5.	
7.	
75
Click “OK” to apply settings.
Troubleshooting
Table of Contents
sections
Belkin Wireless Comparison Chart
Technical-Support Information
Wireless
Technology
Enhanced
N MIMO
N1 MIMO
(802.11g)
(1x1 draft
802.11n)
(draft 802.11n
with MIMO)
(draft 802.11n
with MIMO)
Speed/Data
Rate*
Up to 54Mbps*
Up to 150Mbps*
Up to 300Mbps*
Up to 300Mbps*
Frequency
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with
the unlicensed
band 2.4GHz
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with the
unlicensed band
2.4GHz
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with
the unlicensed
band 2.4GHz
Common
household
devices such as
cordless phones
and microwave
ovens may
interfere with
the unlicensed
band 2.4GHz
Compatibility
Compatible with
802.11b/g
Compatible with
802.11b/g, draft
802.11n, and
Belkin G+ MIMO
Compatible with
draft 802.11n**
and 802.11b/g
Compatible with
draft 802.11n**
and 802.11b/g
Coverage*
Up to 400 ft.*
Up to 600 ft.*
Up to 1,200 ft.*
Up to 1,400 ft.*
Advantage
Common—
widespread
use for Internet
sharing
Better coverage
and consistent
speed and range
Enhanced
speed and
coverage
Leading edge—
best coverage
and throughput
For latest software updates or if you have any further questions
regarding installation of this product, please visit:
http://www.belkin.com/uk/support/tech/index.asp
*Distance and connection speeds will vary depending on your networking environment.
**This Router is compatible with products based on the same version of the draft 802.11n
specifications and may require a software upgrade for best results.
G Wireless Modem Router
76
10
Appendixes
Table of Contents
sections
10
Appendix A: Glossary
IP Address
DNS
The “IP address” is the internal IP address of the Router. To access the
advanced setup interface, type this IP address into the address bar
of your browser. This address can be changed if needed. To change
the IP address, type in the new IP address and click “Apply Changes”.
The IP address you choose should be a non-routable IP. Examples of a
non-routable IP are:
DNS is an acronym for Domain Name Server. A Domain Name Server
is a server located on the Internet that translates URLs (Universal
Resource Links) like www.belkin.com to IP addresses. Many ISPs do
not require you to enter this information into the Router. If you are using
a static IP connection type, then you may need to enter a specific DNS
address and secondary DNS address for your connection to work
properly. If your connection type is Dynamic or PPPoE, it is likely that
you do not have to enter a DNS address.
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
Subnet Mask
Some networks are far too large to allow all traffic to flood all its parts.
These networks must be broken down into smaller, more manageable
sections, called subnets. The subnet mask is the network address plus
the information reserved for identifying the “subnetwork”.
G Wireless Modem Router
77
Appendixes
Table of Contents
sections
10
PPPoE
PPPoA
Most ADSL providers use PPPoE as the connection type. If you use an
ADSL modem to connect to the Internet, your ISP may use PPPoE to log
you into the service.
Enter the PPPoA information in the provided spaces, and click “Next”.
Click “Apply” to activate your settings.
Your connection type is PPPoE if:
1.	
Your ISP gave you a user name and password which is required to
connect to the Internet.
2.	
Your ISP gave you software such as WinPoET or Enternet300 that
you use to connect to the Internet.
3.	
You have to double-click on a desktop icon other than your
browser to get on the Internet.
User name - Enter the user name. (Assigned by your ISP).
2.	
Password - Enter your password. (Assigned by your ISP).
3.	
Retype Password - Confirm the password. (Assigned by your ISP).
4.	
VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here. (Assigned by your ISP).
Disconnect after X...
This feature is used to automatically disconnect the Router from your
ISP when there is no activity for a specified period of time. For instance,
placing a check mark next to this option and entering “5” into the minute
field will cause the Router to disconnect from the Internet after five
minutes of no Internet activity.
To set the Router to use PPPoE, type in your user name and password
in the spaces provided. After you have typed in your information, click
“Apply Changes”.
After you apply the changes, the “Internet Status” indicator will read
“connection OK” if your Router is set up properly.
G Wireless Modem Router
1.	
This option should be used if you pay for your Internet service by
the minute.
78
Appendixes
Table of Contents
sections
10
Channel and SSID
Encryption
To change the channel of operation of the Router, select the desired
channel from the drop-down menu and select your channel. Click “Apply
Changes” to save the setting. You can also change the SSID. The SSID
is the equivalent to the wireless network’s name. You can make the SSID
anything you want to. If there are other wireless networks in your area,
you should give your wireless network a unique name. Click inside of
the SSID box and type in a new name. Click “Apply Changes” to make
the change.
Setting encryption can help keep your network secure. The Router uses
Wired Equivalent Privacy (WEP) encryption to protect your data and
features two rates of encryption: 64-bit and 128-bit. Encryption works
on a system of keys. The key on the computer must match the key on
the Router, and there are two ways to make a key. The easiest is to let
the Router’s software convert a passphrase you’ve created into a key.
The advanced method is to enter the keys manually.
Application Gateways
ESSID Broadcast
Application gateways let you specify specific ports to be open for
specific applications to work properly with the Network Address
Translation (NAT) feature of the Router. A list of popular applications has
been included. You can select an application from the popular choices
included in the drop-down list. Your selections will be programmed into
the Router. From the drop-down list, select the row that you want to
copy the settings from, and the row you want to copy to, and then click
“Copy To”. The settings will be transferred to the row you specified.
Click “Apply Changes” to save the setting for that application. If your
application is not here, you will need to check with the application
vendor to determine which ports need to be configured. You can
manually input this port information into the Router.
Many wireless network adapters currently on the market possess a
feature known as site survey. It scans the air for any available network
and allows each computer to automatically select a network from the
survey. This occurs if the computer’s SSID is set to “ANY”. Your Belkin
Router can block this random search for a network. If you disable the
“ESSID Broadcast” feature, the only way a computer can join your
network is by its SSID being set to the specific name of the network
(like WLAN). Be sure that you know your SSID (network name) before
enabling this feature. It is possible to make your wireless network nearly
invisible. By turning off the broadcast of the SSID, your network will not
appear in a site survey. Obviously, turning off the broadcast feature of
the SSID helps increase security.
G Wireless Modem Router
79
Appendixes
Table of Contents
sections
10
Virtual Servers
URL Blocking
This function will allow you to route external (Internet) calls for
services such as a web server (port 80), FTP server (Port 21), or other
applications through your Router to your internal network. Since your
internal computers are protected by a firewall, machines from the
Internet cannot get to them because they cannot be “seen”. If you need
to configure the virtual server function for a specific application, you will
need to contact the application vendor to find out which port settings
you need.
To configure the URL-blocking feature, specify the websites (www.
somesite.com) and/or keywords you want to filter on your network. Click
“Apply Changes” to activate the change. To complete this configuration,
you will need to create or modify an access rule in the client IP filters
section. To modify an existing rule, click the “Edit” option next to the
rule you want to modify. To create a new rule, click on the “Add PC”
option. From the “Access Control Add PC” section, check the option for
“WWW with URL Blocking” in the “Client PC Service” table to filter out
the websites and keywords specified.
To manually enter settings, enter the IP address in the space provided
for the internal machine, the port type (TCP or UDP), and the LAN and
public port(s) required to pass. Then select “Enable” and click “Set”. You
can only pass one port per internal IP address. Opening ports in your
firewall can pose a security risk. You can enable and disable settings
very quickly. It is recommended that you disable the settings when you
are not using a specific application.
Schedule Rule
To configure the schedule rule, specify the name, comment, start time,
and end time that you want to filter on your network. This page defines
schedule rule names and activates the schedule for use in the “Access
Control” page.
Client IP Filters
MAC-Address Filtering
The Router can be configured to restrict access to the Internet, email, or
other network services at specific days and times. Restriction can be set
for a single computer, a range of computers, or multiple computers.
G Wireless Modem Router
The MAC-address filter is a powerful security feature that allows you
to specify which computers are allowed on the network. Any computer
attempting to access the network that is not specified in the filter list
will be denied access. When you enable this feature, you must enter the
MAC address of each client on your network to allow network access to
each or copy the MAC address by selecting the name of the computer
from the “DHCP Client List”. To enable this feature, select “Enable”.
Next, click “Apply Changes” to save the settings.
80
Appendixes
Table of Contents
sections
10
DMZ
Administrator Password
If you have a client PC that cannot run an Internet application properly
from behind the firewall, you can open the client up to unrestricted
two-way Internet access. This may be necessary if the NAT feature
is causing problems with an application such as a game or video
conferencing application. Use this feature on a temporary basis. The
computer in the DMZ is not protected from hacker attacks. To put
a computer in the DMZ, enter the last digits of its LAN IP address in
the “Static IP” field and click “Apply Changes” for the change to take
effect. If you have only one public (WAN) IP address, then you can
leave the public IP to “0.0.0.0”. If you are using multiple public (WAN)
IP addresses, it is possible to select which public (WAN) IP address the
DMZ host will be directed to. Type in the public (WAN) IP address you
wish the DMZ host to direct to, enter the last two digits of the IP address
of the DMZ host computer, and click “Apply Changes”.
The Router ships with NO password entered. If you wish to add a
password for more security, you can set a password from your Router’s
web-based user interface. Keep your password in a safe place as you
will need this password if you need to log into the Router in the future. It
is STRONGLY RECOMMENDED that you set a password if you plan to
use the remote management feature.
G Wireless Modem Router
The login time-out option allows you to set the period of time that you
can be logged into the Router’s advanced setup interface. The timer
starts when there has been no activity. For example, you have made
some changes in the advanced setup interface, then left your computer
alone without clicking “Logout”.
Assuming the time-out is set to 10 minutes, then 10 minutes after you
leave, the login session will expire. You will have to log into the Router
again to make any more changes. The login time-out option is for
security purposes and the default is set to 10 minutes. Note, only one
computer can be logged into the Router’s advanced setup interface at
a time.
81
Appendixes
Table of Contents
sections
10
Time and Time Zone
UPnP
The Router keeps time by connecting to a Simple Network Time
Protocol (SNTP) server. This allows the Router to synchronize the system
clock to the global Internet. The synchronized clock in the Router is
used to record the security log and control client filtering. Select the
time zone that you reside in. If you reside in an area that observes
daylight saving time, then place a check mark in the box next to “Enable
Daylight Saving”. The system clock may not update immediately. Allow
at least 15 minutes for the Router to contact the time servers on the
Internet and get a response. You cannot set the clock yourself.
UPnP (Universal Plug-and-Play) is a technology that offers seamless
operation of voice messaging, video messaging, games, and other
applications that are UPnP-compliant. Some applications require the
Router’s firewall to be configured in a specific way to operate properly.
This usually requires opening TCP and UDP ports and in some instances
setting trigger ports. An application that is UPnP-compliant has the
ability to communicate with the Router, basically “telling” the Router
which way it needs the firewall configured. The Router ships with
the UPnP feature disabled. If you are using any applications that are
UPnP-compliant, and wish to take advantage of the UPnP features,
you can enable the UPnP feature. Simply select “Enable” in the “UPnP
Enabling” section of the “Utilities” page. Click “Apply Changes” to save
the change.
Remote Management
Before you enable this function, MAKE SURE YOU HAVE SET THE
ADMINISTRATOR PASSWORD. Remote management allows you to
make changes to your Router’s settings from anywhere on the Internet.
G Wireless Modem Router
82
Appendixes
Table of Contents
sections
10
Appendix B: Important Factors for Placement and Setup
Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if you are
concerned that your network is not operating at its maximum effectiveness, this checklist may help.
1. Wireless Router (or Access Point) Placement
2. Avoid Obstacles and Interference
Place your wireless router (or access point), the central connection point
of your network, as close as possible to the center of your wireless
network devices.
Avoid placing your wireless router (or access point) near devices that
may emit radio “noise,” such as microwave ovens. Dense objects that
can inhibit wireless communication include:
To achieve the best wireless network coverage for your “wireless clients”
(i.e., computers enabled by Belkin Wireless Notebook Network Cards,
Wireless Desktop Network Cards, and Wireless USB Adapters):
•
Refrigerators
•
Washers and/or dryers
•
Metal cabinets
•
•
Large aquariums
•
Metallic-based UV tinted windows
Ensure that your wireless router’s (or access point’s) networking
antennas are parallel to each other, and are positioned vertically
(toward the ceiling). If your wireless router (or access point) itself is
positioned vertically, point the antennas a much as possible in an
upward direction.
•
In multistory homes, place the wireless router (or access point)
on a floor that is as close to the center of the home as possible.
This may mean placing the wireless router (or access point) on an
upper floor.
•
Try not to place the wireless router (or access point) near a
cordless 2.4GHz phone.
G Wireless Modem Router
If your wireless signal seems weak in some spots, make sure that
objects such as these are not blocking the signal’s path (between your
computers and wireless router or access point).
83
Appendixes
Table of Contents
sections
10
3. Cordless Phones
4. Choose the “Quietest” Channel for your Wireless Network
If the performance of your wireless network is impaired after attending
to the above issues, and you have a cordless phone:
In locations where homes or offices are close together, such as apar™
ent buildings or office complexes, there may be wireless networks
nearby that can conflict with yours.
•
Try moving cordless phones away from wireless routers (or access
points) and your wireless-enabled computers.
•
Unplug and remove the battery from any cordless phone that
operates on the 2.4GHz band (check manufacturer’s information). If
this fixes the problem, your phone may be interfering.
•
If your phone supports channel selection, change the channel on
the phone to the farthest channel from your wireless network. For
example, change the phone to channel 1 and move your wireless
router (or access point) to channel 11. See your phone’s user
manual for detailed instructions.
•
Use the Site Survey capabilities found in the Wireless LAN Utility of your
wireless adapter to locate any other wireless networks that are available
(see your wireless adapter’s manual), and move your wireless router
(or access point) and computers to a channel as far away from other
networks as possible.
Experiment with more than one of the available channels, in order to
find the clearest connection and avoid interference from neighboring
cordless phones or other wireless devices.
For Belkin wireless networking products, use the detailed Site Survey
and wireless channel information included in your User Manual.
These guidelines should allow you to cover the maximum possible area
with your wireless router (or access point). Should you need to cover
an even wider area, we suggest the Belkin Wireless Range Extender/
Access Point.
If necessary, consider switching to a 900MHz or 5GHz
cordless phone.
G Wireless Modem Router
84
Appendixes
Table of Contents
sections
10
5. Secure Connections, VPNs, and AOL
Secure connections can be interrupted by a computer’s power
management setting, which causes it to “go to sleep.” The simplest
solution to avoid this is to simply reconnect by rerunning the VPN or
AOL software, or by re-logging into the secure website.
Secure connections typically require a user name and password, and
are used where security is important. Secure connections include:
•
Virtual Private Network (VPN) connections, often used to connect
remotely to an office network
•
The “Bring Your Own Access” program from America Online (AOL),
which lets you use AOL through broadband provided by another
cable or DSL service
•
Most online banking websites
•
Many commercial websites that require a user name and password
to access your account
G Wireless Modem Router
A second alternative is to change your computer’s power management
settings so it does not go to sleep; however, this may not be appropriate
for portable computers. To change your power management setting
under Windows, see the “Power Options” item in the Control Panel.
If you continue to have difficulty with Secure Connections, VPNs, and
AOL, please review the steps above to be sure you have addressed
these issues.
85
Information
Table of Contents
sections
Technical Support
You can find technical-support information on our website, www.belkin.com, by navigating to the tech-support section.
If you want to contact technical support by phone, please call the number you need from the list below*:
*Local rates apply.
Country
Number
Internet Address
Austria
0820 200766
http://www.belkin.com/uk/networking/
Belgium
07 07 00 073
http://www.belkin.com/nl/networking/
Czech Republic
239 000 406
http://www.belkin.com/uk/networking/
Denmark
701 22 403
http://www.belkin.com/uk/networking/
Finland
00800 - 22 35 54 60
http://www.belkin.com/uk/networking/
France
08 - 25 54 00 26
http://www.belkin.com/fr/networking/
Germany
0180 - 500 57 09
http://www.belkin.com/de/networking/
Greece
00800 - 44 14 23 90
http://www.belkin.com/uk/networking/
Hungary
06 - 17 77 49 06
http://www.belkin.com/uk/networking/
Iceland
800 8534
http://www.belkin.com/uk/networking/
Ireland
0818 55 50 06
http://www.belkin.com/uk/networking/
Italy
02 - 69 43 02 51
http://www.belkin.com/it/support/tech/issues_more.asp
Luxembourg
34 20 80 85 60
http://www.belkin.com/uk/networking/
0900 - 040 07 90
http://www.belkin.com/nl/networking/
Norway
81 50 0287
http://www.belkin.com/uk/networking/
Poland
00800 - 441 17 37
http://www.belkin.com/uk/networking/
Portugal
707 200 676
http://www.belkin.com/uk/networking/
Russia
495 580 9541
http://www.belkin.com/networking/
South Africa
0800 - 99 15 21
http://www.belkin.com/uk/networking/
Spain
902 - 02 43 66
http://www.belkin.com/es/support/tech/networkingsupport.asp
Sweden
07 - 71 40 04 53
http://www.belkin.com/se/support/tech/networkingsupport.asp
Switzerland
08 - 48 00 02 19
http://www.belkin.com/uk/networking/
United Kingdom
0845 - 607 77 87
http://www.belkin.com/uk/networking/
Other Countries
+44 - 1933 35 20 00
Netherlands
G Wireless Modem Router
€0.10 per minute
87
10
Information
Table of Contents
sections
Modifications
The FCC requires the user to be notified that any changes or
modifications to this device that are not expressly approved by
Belkin International, Inc., may void the user’s authority to operate
the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210
Industry Canada. This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003
du Canada.
G Wireless Modem Router
88
10
Information
Table of Contents
sections
EU DECLARATION OF CONFORMITY
ýesky
[Czech]
[Belkin Ltd] tímto prohlašuje, že tento [F5D7634-4] je ve shodČ se základními požadavky a
dalšími pĜíslušnými ustanoveními smČrnice 1999/5/ES.
Dansk
[Danish]
Undertegnede [Belkin Ltd] erklærer herved, at følgende udstyr [F5D7634-4] overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch
[German]
Hiermit erklärt [Belkin Ltd], dass sich das Gerät [F5D7634-4] in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie
1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab [Belkin Ltd] seadme [F5D7634-4] vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
10
Suomi
[Finnish]
[Belkin Ltd] vakuuttaa täten että [F5D7634-4] tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar Belkin Ltd] att denna [F5D7634-4] står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Íslenska
[Icelandic]
Hér með lýsir [Belkin Ltd] yfir því að [F5D7634-4] er í samræmi við grunnkröfur og aðrar kröfur,
sem gerðar eru í tilskipun 1999/5/EC.
Norsk
[Norwegian]
[Belkin Ltd] erklærer herved at utstyret [F5D7634-4] er i samsvar med de grunnleggende krav
og øvrige relevante krav i direktiv 1999/5/EF.
Hereby, [Belkin Ltd], declares that this [F5D7634-4] is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente [Belkin Ltd] declara que el [F5D7634-4] cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ǼȜȜȘȞȚțȒ
[Greek]
ȂǼ ȉǾȃ ȆǹȇȅȊȈǹ [Belkin Ltd] ǻǾȁȍȃǼǿ ȅȉǿ [F5D7634-4] ȈȊȂȂȅȇĭȍȃǼȉǹǿ ȆȇȅȈ ȉǿȈ
ȅȊȈǿȍǻǼǿȈ ǹȆǹǿȉǾȈǼǿȈ Ȁǹǿ ȉǿȈ ȁȅǿȆǼȈ ȈȋǼȉǿȀǼȈ ǻǿǹȉǹȄǼǿȈ ȉǾȈ ȅǻǾīǿǹȈ 1999/5/ǼȀ.
Français
[French]
Par la présente [Belkin Ltd] déclare que l'appareil [F5D7634-4] est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente [Belkin Ltd] dichiara che questo [F5D7634-4] è conforme ai requisiti essenziali
ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo [Belkin Ltd Belkin Ltd ] deklarƝ, ka [F5D7634-4 / iekƗrtas tips] atbilst DirektƯvas 1999/5/EK
bnjtiskajƗm prasƯbƗm un citiem ar to saistƯtajiem noteikumiem.
Lietuviǐ
[Lithuanian]
Šiuo [Belkin Ltd] deklaruoja, kad šis [F5D7634-4] atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
http://www.belkin.com/doc/
For information on product disposal please refer to
http://environmental.belkin.com
Hierbij verklaart [Belkin Ltd] dat het toestel [F5D7634-4l] in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, [Belkin Ltd], jiddikjara li dan [F5D7634-4] jikkonforma mal-ƫtiƥijiet essenzjali u ma
provvedimenti oƫrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, [Belkin Ltd] nyilatkozom, hogy a [F5D7634-4] megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski
[Polish]
Niniejszym [Belkin Ltd] oĞwiadcza, Īe [F5D7634-4] jest zgodny z zasadniczymi wymogami oraz
pozostaáymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
[Belkin Ltd] declara que este [F5D7634-4] está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
[I Belkin Ltd] izjavlja, da je ta [F5D7634-4] v skladu z bistvenimi zahtevami in ostalimi
relevantnimi doloþili direktive 1999/5/ES.
Slovensky
[Slovak]
[Belkin Ltd] týmto vyhlasuje, že [F5D7634-4] spĎĖa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
FOR USE IN
AT
BE
CY
CZ
DK
EE
FI
FR
DE
GR
HU
IE
IT
LV
LT
LU
MT
NL
PL
PT
SK
SI
ES
SE
GB
IS
LI
NO
CH
BG
RO
TR
Restricted Use in Certain Countries
G Wireless Modem Router
89
OPERATES ON CHANNELS 1-13
Class 2 Equipment
Information
Table of Contents
sections
10
Belkin International, Inc., Limited Lifetime Product Warranty
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not
provided to Belkin for inspection upon Belkin’s request at the sole
expense of the purchaser, or if Belkin determines that the Belkin product
has been improperly installed, altered in any way, or tampered with.
The Belkin Product Warranty does not protect against acts of God such
as flood, earthquake, lightning, war, vandalism, theft, normal-use wear
and tear, erosion, depletion, obsolescence, abuse, damage due to low
voltage disturbances (i.e. brownouts or sags), non-authorized program,
or system equipment modification or alteration.
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of
this Belkin product that the product shall be free of defects in design,
assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for the lifetime of the product.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of
charge (except for shipping charges for the product). Belkin reserves the
right to discontinue any of its products without notice, and disclaims any
limited warranty to repair or replace any such discontinued products.
In the event that Belkin is unable to repair or replace the product (for
example, because it has been discontinued), Belkin will offer either
a refund or a credit toward the purchase of another product from
Belkin.com in an amount equal to the purchase price of the product
as evidenced on the original purchase receipt as discounted by its
natural use.
G Wireless Modem Router
How to get service.
To get service for your Belkin product contact tech support on the
numbers shown earlier in the user manual.
90
Information
Table of Contents
sections
10
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY
OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,
ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Belkin reserves the right to review the damaged Belkin product. All
costs of shipping the Belkin product to Belkin for inspection shall be
borne solely by the purchaser. If Belkin determines, in its sole discretion,
that it is impractical to ship the damaged equipment to Belkin, Belkin
may designate, in its sole discretion, an equipment repair facility to
inspect and estimate the cost to repair such equipment. The cost, if any,
of shipping the equipment to and from such repair facility and of such
estimate shall be borne solely by the purchaser. Damaged equipment
must remain available for inspection until the claim is finalized.
Whenever claims are settled, Belkin reserves the right to be subrogated
under any existing insurance policies the purchaser may have.
Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH
AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING
OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state. Some states do not
allow the exclusion or limitation of incidental, consequential, or other
damages, so the above limitations may not apply to you.
G Wireless Modem Router
91
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to operate
this equipment.
IEEE 802.11b or 802.11g operation of this product in
the U.S.A. is firmware-limited to channels 1 through
11.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Part 68 REQUIREMENTS
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the
bottom of this equipment is a label that contains,
among other information, a product identifier in the
format US: BKCDL01BF5D7634V2. If requested, this
number must be provided to the telephone company.
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most but
not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may
be connected to a line, as determined by the total
RENs, contact the local telephone company. For
products approved after July 23, 2001, the REN for
this product is part of the product identifier that has the
format US: BKCDL01BF5D7634V2. The digits
represented by 01 are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products,
the REN is separately shown on the label.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation
instructions for details.
If your equipment causes harm to the telephone
network, the telephone company may discontinue your
service temporarily. If possible, they will notify you in
advance. But if advance notice is not practical, you will
be notified as soon as possible. You will be informed of
your right to file a complaint with the FCC. Your
telephone company may make changes in it is
facilities, equipment, operations or procedures that
could affect the proper functioning of your equipment.
If they do, you will be notified in advance to give you
an opportunity to maintain uninterrupted telephone
service.
If you experience trouble with this telephone
equipment, Please contact the following address and
phone number for information on obtaining service or
repairs.
The telephone company may ask that you disconnect
this equipment from the network until the problem has
been corrected or until you are sure that the
equipment is not malfunctioning.
This equipment may not be used on coin service
provided by the telephone company. Connection to
party lines is subject to state tariffs.
COMPANY:
Belkin International, Inc.
ADDRESS:
501 West Walnut Street, Compton, CA 90220-5221
TEL NO:
1 (310) 604-2315
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
Belkin SAS
130 rue de Silly
92100 Boulogne-Billancourt,
France
Belkin GmbH
Hanebergstrasse 2
80637 Munich
Germany
Belkin Iberia
C/ Anabel Segura, 10 planta baja, Of. 2
28108, Alcobendas, Madrid
Spain
Belkin Italy & Greece
Via Carducci, 7
Milano 20123
Italy
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk,
Netherlands
© 2009 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed. Apple, AirPort, Mac, Mac OS, and AppleTalk are trademarks of Apple
Inc., registered in the U.S. and other countries. Windows, Windows Vista, NT, and Microsoft are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries
PM01218ea-B
F5D7634-4 v2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Instance ID                     : uuid:0164e80c-ca4f-4d86-84d8-37e2891f25ff
Document ID                     : adobe:docid:indd:9fa028b4-7841-11de-83b8-aba1c0c5a0ca
Rendition Class                 : proof:pdf
Derived From Instance ID        : 20fdd546-7796-11de-83b8-aba1c0c5a0ca
Derived From Document ID        : adobe:docid:indd:eb983b70-6f0f-11dd-9806-9cf02ad35a2a
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 504.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 96.00, 300.00, 300.00, 300.00, 300.00, 96.00, 96.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 504.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 96.00, 300.00, 300.00, 300.00, 300.00, 96.00, 96.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:55FAE63F779111DE8A9A944E7F6EB892, uuid:55FAE63F779111DE8A9A944E7F6EB892, uuid:cdcf768b-2917-eb41-93f6-740d9a6a961e, uuid:05111660-d172-df4a-81bc-b8fb946b86ac, uuid:0b771514-cc38-0d4b-966a-8cd5d36a2c4b, uuid:8fabc241-6ce0-2442-8fed-62fcd1128c34, uuid:71fad413-e9a9-1140-b08b-f208f6b5a12d, uuid:b0b8a63b-9d93-11da-9482-000d93b8c722, uuid:95AF4477FFDEDD119A4AD29E0D1CA4AD, uuid:0ef7448e-d158-2b41-9b9a-175e78897dfc, uuid:71fad413-e9a9-1140-b08b-f208f6b5a12d, uuid:0b771514-cc38-0d4b-966a-8cd5d36a2c4b, uuid:cb7c1f7d-ec7c-9746-8cbc-08c648f68af5, uuid:92afe64d-8b3e-2046-a07e-ba358df2d179, uuid:B9355A27B263DD11866BB3A3B1595674, uuid:91C84341B263DD11866BB3A3B1595674, uuid:5AE1DC4EB263DD11866BB3A3B1595674, uuid:26DFCD57B263DD11866BB3A3B1595674, uuid:52616B6BB263DD11866BB3A3B1595674, uuid:C24B1477B263DD11866BB3A3B1595674, uuid:EA705983B263DD11866BB3A3B1595674, uuid:22BE628DB263DD11866BB3A3B1595674, uuid:9A293C99B263DD11866BB3A3B1595674, uuid:AA1928B7B263DD11866BB3A3B1595674, uuid:9AD962C2B263DD11866BB3A3B1595674, uuid:C46D41CEB263DD11866BB3A3B1595674, uuid:2143AA95F466DD119B77A0BC63F4B7B4, uuid:52387024B363DD11866BB3A3B1595674, uuid:CE3D9145B363DD11866BB3A3B1595674, uuid:2EC2A8AFF466DD119B77A0BC63F4B7B4, uuid:3683DFCAF666DD119B77A0BC63F4B7B4, uuid:B721536FBF6ADD118F3DF4A90CE8CCD2, uuid:5DC7872CF766DD119B77A0BC63F4B7B4, uuid:B3618BC6F866DD119B77A0BC63F4B7B4, uuid:A373428BBF6ADD118F3DF4A90CE8CCD2, uuid:CB92ED9AC06ADD118F3DF4A90CE8CCD2, uuid:69500276C36ADD118F3DF4A90CE8CCD2, uuid:69F3897AFC66DD119B77A0BC63F4B7B4, uuid:BB40E700C46ADD118F3DF4A90CE8CCD2, uuid:98301FB7B363DD11866BB3A3B1595674, uuid:86925D53B363DD11866BB3A3B1595674, uuid:403A97C2B363DD11866BB3A3B1595674, uuid:94B667E7AD6ADD11BFEA9B995003895A, uuid:B11D12CDB363DD11866BB3A3B1595674, uuid:758456D4B363DD11866BB3A3B1595674, uuid:977CEF212669DD119DCAA1E00C710F80, uuid:61DF9EFAB363DD11866BB3A3B1595674, uuid:94B667E7AD6ADD11BFEA9B995003895A, uuid:A11A1EB4B66ADD11BFEA9B995003895A, uuid:D82E0101B463DD11866BB3A3B1595674, uuid:BE72120FB463DD11866BB3A3B1595674, uuid:51820734B463DD11866BB3A3B1595674, uuid:5A820734B463DD11866BB3A3B1595674, uuid:232C8882B463DD11866BB3A3B1595674, uuid:2C2C8882B463DD11866BB3A3B1595674, uuid:232C8882B463DD11866BB3A3B1595674, uuid:A05D27A2B463DD11866BB3A3B1595674, uuid:8A701AE5B463DD11866BB3A3B1595674, uuid:EAB0F0D4B463DD11866BB3A3B1595674, uuid:1EC59EF8B463DD11866BB3A3B1595674, uuid:1E99CC12B563DD11866BB3A3B1595674, uuid:961A728CB76ADD11BFEA9B995003895A, uuid:194DB829B563DD11866BB3A3B1595674, uuid:EAB0F0D4B463DD11866BB3A3B1595674, uuid:CEC3FD7BB86ADD11BFEA9B995003895A, uuid:D956B147B663DD11866BB3A3B1595674, uuid:BD361857B663DD11866BB3A3B1595674, uuid:43C93060B663DD11866BB3A3B1595674, uuid:b0b8a63b-9d93-11da-9482-000d93b8c722, uuid:67c15245-6852-e544-87bf-f0928c05079c, uuid:8FB82D43F950DD11BEA396FE76D59FC9, uuid:e2d792a3-8394-48dc-b1fb-12546ffb2992, uuid:e2d792a3-8394-48dc-b1fb-12546ffb2992
Manifest Reference Document ID  : uuid:55FAE63E779111DE8A9A944E7F6EB892, uuid:55FAE63E779111DE8A9A944E7F6EB892, uuid:E3177C00A163DD11B8C3A87375E4FBA4, uuid:69ACFB03924EDD11BC62F4BA02EA01AA, uuid:E38EB57D9659DD118E87AD737D81BF2C, uuid:E5177C00A163DD11B8C3A87375E4FBA4, uuid:E98DD98FBB54DD11BD0EA741B5DA0D7D, uuid:94AF4477FFDEDD119A4AD29E0D1CA4AD, uuid:7438668A8F29DD11B7C2AC97445B355C, uuid:E98DD98FBB54DD11BD0EA741B5DA0D7D, uuid:E38EB57D9659DD118E87AD737D81BF2C, uuid:6DD8F469BD6ADD11B981B164704BE981, uuid:71D8F469BD6ADD11B981B164704BE981, uuid:47F35501B263DD11866BB3A3B1595674, uuid:C1355A27B263DD11866BB3A3B1595674, uuid:99C84341B263DD11866BB3A3B1595674, uuid:62E1DC4EB263DD11866BB3A3B1595674, uuid:2EDFCD57B263DD11866BB3A3B1595674, uuid:5A616B6BB263DD11866BB3A3B1595674, uuid:CA4B1477B263DD11866BB3A3B1595674, uuid:21BE628DB263DD11866BB3A3B1595674, uuid:99293C99B263DD11866BB3A3B1595674, uuid:A91928B7B263DD11866BB3A3B1595674, uuid:99D962C2B263DD11866BB3A3B1595674, uuid:A2D962C2B263DD11866BB3A3B1595674, uuid:2043AA95F466DD119B77A0BC63F4B7B4, uuid:51387024B363DD11866BB3A3B1595674, uuid:CD3D9145B363DD11866BB3A3B1595674, uuid:2CC2A8AFF466DD119B77A0BC63F4B7B4, uuid:3583DFCAF666DD119B77A0BC63F4B7B4, uuid:B621536FBF6ADD118F3DF4A90CE8CCD2, uuid:5CC7872CF766DD119B77A0BC63F4B7B4, uuid:B2618BC6F866DD119B77A0BC63F4B7B4, uuid:A273428BBF6ADD118F3DF4A90CE8CCD2, uuid:CA92ED9AC06ADD118F3DF4A90CE8CCD2, uuid:68500276C36ADD118F3DF4A90CE8CCD2, uuid:68F3897AFC66DD119B77A0BC63F4B7B4, uuid:BA40E700C46ADD118F3DF4A90CE8CCD2, uuid:97301FB7B363DD11866BB3A3B1595674, uuid:85925D53B363DD11866BB3A3B1595674, uuid:3F3A97C2B363DD11866BB3A3B1595674, uuid:93B667E7AD6ADD11BFEA9B995003895A, uuid:B01D12CDB363DD11866BB3A3B1595674, uuid:748456D4B363DD11866BB3A3B1595674, uuid:967CEF212669DD119DCAA1E00C710F80, uuid:60DF9EFAB363DD11866BB3A3B1595674, uuid:93B667E7AD6ADD11BFEA9B995003895A, uuid:A01A1EB4B66ADD11BFEA9B995003895A, uuid:D72E0101B463DD11866BB3A3B1595674, uuid:BD72120FB463DD11866BB3A3B1595674, uuid:C95BE219B463DD11866BB3A3B1595674, uuid:59820734B463DD11866BB3A3B1595674, uuid:222C8882B463DD11866BB3A3B1595674, uuid:2B2C8882B463DD11866BB3A3B1595674, uuid:222C8882B463DD11866BB3A3B1595674, uuid:9F5D27A2B463DD11866BB3A3B1595674, uuid:89701AE5B463DD11866BB3A3B1595674, uuid:E9B0F0D4B463DD11866BB3A3B1595674, uuid:1DC59EF8B463DD11866BB3A3B1595674, uuid:1D99CC12B563DD11866BB3A3B1595674, uuid:951A728CB76ADD11BFEA9B995003895A, uuid:184DB829B563DD11866BB3A3B1595674, uuid:E9B0F0D4B463DD11866BB3A3B1595674, uuid:CDC3FD7BB86ADD11BFEA9B995003895A, uuid:D856B147B663DD11866BB3A3B1595674, uuid:BC361857B663DD11866BB3A3B1595674, uuid:42C93060B663DD11866BB3A3B1595674, uuid:66F89F37A463DD11958397F8FEF0F20D, uuid:8EB82D43F950DD11BEA396FE76D59FC9, uuid:9a112408-4143-43be-9ea1-83d6177ef7b5, uuid:9a112408-4143-43be-9ea1-83d6177ef7b5
Create Date                     : 2009:07:22 13:09:50+02:00
Modify Date                     : 2009:08:25 17:56:12+08:00
Metadata Date                   : 2009:08:25 17:56:12+08:00
Creator Tool                    : Adobe InDesign CS3 (5.0.1)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6075 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 45
Creator                         : Adobe InDesign CS3 (5.0.1)

EXIF Metadata provided by EXIF.tools