Belkin F7D3402V1 Belkin Modem Router User Manual Manual

Belkin International, Inc. Belkin Modem Router Manual

Manual

23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change SHARE WIRELESS MODEM-ROUTER USER MANUAL F7D3402 v1 TABLE OF CONTENTS Getting Started What’s in the Box Initial Setup Advanced Tools & Settings The Belkin Router Manager Manual Setup Using Your Browser Adding Computers to Your Network Adding USB Devices Bundled Software Additional Capabilities Getting to Know Your Router Front Panel Back Panel Technical Details Technical Features System Requirements Troubleshooting, Support, and Warranty Troubleshooting Technical Support Belkin International, Inc., Limited 2-Year Product Warranty Regulatory Information FCC Statement
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change Getting Started What’s in the Box Share Wireless Modem-Router ADSL cable (attached to router) In some regions, a phone-jack adapter (microfilter) will be included. Power supply (attached to router) Network information card (attached to router) Belkin Setup CD with User Manual Initial Setup Where to Place Your Router Forthebestresults,placetheRouterinanopenlocationawayfromlargemetalobjectsandmagnetssuchasthosefoundinspeakers.RaisingtheRouterabovefloorlevelcanimprovethestrengthofyourwirelesssignal.How to Set It Up [MRSHARE/PLAYSETUPDIAGRAMmrshareplaysetup.ai]1) ConnectyourRouter’sADSLcabletoyourphonejackorphone‐jackadapter(microfilter).IfyouarereplacinganexistingRouterorgateway,thismayrequireunpluggingtheexistinggateway.Note:IfrequiredbyyourInternetServiceProvider(ISP),plugtheincludedphone‐jackadapter(microfilter)intoyourwall‐mountedphonejack.PleasecheckwithyourproviderbeforeconnectingyourRouterifyouareunsurewhetherornotyouneedtousetheincludedphone‐jackadapter.2) PlugtheRouter’spowersupplyintoawalloutlet.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change 3) PuttheCDintoyourcomputer.IftheCDdoesn’topenautomatically,pleasebrowsetoyourCDdriveanddouble‐clickontheBelkinSetupCDicon.[SCREENSHOTOFSETUPMENUsetupmenu.png] 4) ClicktheSetupiconontheCDmenu.[SCREENSHOTOFNETWORKINFOCARDSCREENsetupnetinfocard.png] 5) Afterabriefinstallation,thesetupsoftwarewillaskyouforthenetworknameandpasswordfromthenetworkinformationcardthatisattachedtoyourRouter.StorethecardunderthebaseofyourRouterforfuturereference.[SCREENSHOTOFSUCCESSsetupsuccess.png] 6) Aprogressscreenwillappearwhileadditionalsoftwareisinstalled.Thismaytakeafewminutestocomplete.Oncefinished,a“Success”messagewillappearindicatingthatyouareconnectedtotheInternetviayournewBelkinRouter.Duringsetupyoumaybeaskedforadditionalinformation.YoumayneedtoenterausernameandpasswordprovidedbyyourISP.ThisusernameandpasswordislikelytobefoundonmaterialsthatcamefromyourISPwhenyousignedupforservice.Ifnecessary,youmayneedtocontactyourISPtoretrieveyourusernameandpassword.IfyouhaveastaticIPaddress,youmayneedtoenteradditionalinformationalsoprovidedbyyourISP.Ifyourcomputerdoesn’thaveawirelessadapter,orthesetupsoftwareisunabletocontrolit,youmaybeaskedtoconnectyourcomputertotheRouterwithanetworkcable.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change IfthesetupsoftwareisunabletodetectyourVCIandVPIsettingsbasedonyourcountry,youmayalsoneedtoenterthisinformation.YourISPislikelytohaveprovidedit.Advanced Tools & Settings [SCREENSHOT OF ADVANCED MENU setup advanced2.png] After the initial setup is complete, you have the option to change settings like your network name, security type, and password. To make these changes and others, click on the Advanced Tools icon at the CD Setup menu and select one of the following settings that you would like to change: NetworkName&SecurityPersonalizeyournetworkname(SSID),password,andstrengthofwirelesssecurity.InternetServiceProvider&LoginSettingsHaveyoumovedorchangedInternetServiceProviders?Ifyou’dliketochangethesesettingswithoutrunningthroughthesetupprocessagain,thisistheplace.The Belkin Router Manager [SHARE SCREENSHOT OF TRAY APP MENU (TBD)] The Belkin Router Manager appears in your system tray (Windows) or menu bar (Mac). Its icon indicates the current status of your Router and also allows you to access your Router’s settings to make changes. It also provides quick access to software that came bundled with your Router. To access the Router settings, click on the icon and select from the menu that appears. The status of your Router is shown by the Belkin Router Manager icon, which closely mimics the light on the front of the Router. Green: You are connected to your Belkin Router and it is connected to the Internet. Amber: You are connected to your Belkin Router, but it is not connected to the Internet.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change Manual Setup Using Your Browser [ZOOMED SCREENSHOT OF ADDRESS BAR address bar.png] In your browser, type “http://router” (you do not need to type in anything else such as “www”). Then press the Enter key. If you’re still having trouble running the manual setup option, type “192.168.2.1” in your browser (you do not need to type in anything else such as “http://” or “www”). Then press the Enter key. Adding Computers to Your Network Wireless devices such as computers, network printers, and gaming systems can connect to your Router with a few simple steps. Using the CD 1) PuttheSetupCDintoyourcomputer.IftheCDdoesn’topenautomatically,browsetoyourCDdriveandopentheBelkinSetupCDicon.2) ClicktheSetupiconontheCDmenu.3) Afterabriefinstallation,thesetupsoftwarewillaskyouforthenetworknameandpasswordfromthenetworkinformationcardthatcamewithyourRouter.ThiscardismostlikelynowlocatedunderneaththefootofyourRouterintheprovidedcardslot.4) Aprogressscreenwillappearwhileadditionalsoftwareisinstalled.Thismaytakeafewminutestocomplete.Oncefinished,a“Success”messagewillappearindicatingthatyouareconnectedtotheInternetviayournewBelkinRouter.Note:ThesetupsoftwarerunsonlyonWindowsandMacOSXsystems.Manually
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change IfyouchoosenottousetheincludedSetupCDforaddingadditionalcomputersorwirelessdevices,youcanmanuallyaddtheseitemstoyournetwork.1) Locatethewireless‐network‐connectionsoptiononyourcomputerorwirelessdevice.2) SelectyourBelkinRouterfromthelistofavailablenetworks.YoucanidentifyyourBelkinRouterbylocatingthenetworkname(SSID)fromthecardlocatedunderneaththefootofyourRouter.3) Enteryournetworkpassword(locatedonyournetworkinformationcard).Yourwirelessdevicewilltakeafewmomentstoconnecttoyournetwork.Iftheconnectionisnotmadethefirsttime,trythisprocessagain.Ifyoustillhavedifficultyconnectingtoyournetworkaftertryingthisprocessafewtimes,seethe“Troubleshooting”sectioninthismanualforhelpwithconnectingtoyournetwork.Note:Insomecasesyoumaybepromptedtoselectthesecuritytype.Itisprintedonthecardforyourconvenience.Using the WPS Button 1) StartWPSPushButtonConnection(WPSPBC)onyourcomputerorotherWi‐FidevicethatyouwouldliketoconnectwirelesslytoyourRouter.Oftentherewillbeabuttonforthispurposeinsoftwarethatcamewiththedevice,oraphysical“WPS,”“PBC,”or“Security”buttononthedeviceitself.2) Withintwominutes,presstheWPSbuttononyourRouter.TheWPSlight(smalllightaboveWPSbutton)willblinkgreenwhileitlistensforyourWi‐Fidevice.Onceaconnectionis
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change established,thelightwillturngreenandthengoout.Ifaconnectionisnotestablished,thelightwillblinkamber.Youmayrepeattheprocesstotryagain.YoucanrepeatthisprocessforeachWPS‐enableddeviceyou’dliketoaddtoyournetwork.Adding USB Devices [USB INVITATION DIAGRAM (TBD)] Adding a Drive YoucanshareaUSBharddriveorflashdrivetoyournetworkviayourRouter’sUSBport.Onceconnected,youcansharefilesandmusicwithothercomputersanddeviceswithinyournetwork.PlugyourUSBharddriveintotheUSBportonthebackofyourRouter.WhenthelightabovetheUSBportislit,yourdriveisavailabletocomputersonyournetwork.YoucanmanuallycheckthestatusofyourshareddrivebyvisitingtheUSBPrintandStorageManager,foundundertheBelkinRouterManagericondisplayedinyoursystemtray(Windows)ormenubar(Mac).Ifyouhavedifficultysharingadriveonyournetwork,pleaseseethe“Troubleshooting”sectionofthismanual.Adding a Printer YoucanaddaprintertoyournetworkviayourRouter’sUSBport.Onceconnected,youcanprintfromvariouscomputersandwirelessdeviceswithinyournetwork.Plugyourprinter’sUSBcableintotheUSBportlocatedonthebackofyourRouter.WhenthelightabovetheUSBportislit,yourprinterisavailabletocomputersonyournetwork.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change YoucanmanuallycheckthestatusofyourprinterbyvisitingtheUSBPrintandStorageManager,foundundertheBelkinRouterManagericondisplayedinyoursystemtray(Windows)ormenubar(Mac).Ifyouhavedifficultysharingaprinteronyournetwork,pleaseseethe“Troubleshooting”sectionofthismanual.Note:EachcomputerthatwillusetheprintermusthaveboththeBelkinsoftwareandtheprinter’sdriverinstalled.Iftheprintdriverisnotinstalled,youwillbeaskedtoinstallitbytheBelkinUSBPrintandStorageManager.Adding Other USB Devices OtherUSBdevicesmayalsobesharedviayourRouter.PlugyourdeviceintotheUSBportlocatedonthebackofyourRouter.WhenthelightabovetheUSBportislit,yourdeviceisavailabletocomputersonyournetwork.ComputersrunningtheBelkinUSBPrintandStorageManagerwillbeabletomakeuseoftheshareddevicebyvisitingtheUSBPrintandStorageManager,foundundertheBelkinRouterManagericondisplayedinyoursystemtray(Windows)ormenubar(Mac).Bundled Software USB Print and Storage Manager TheUSBPrintandStorageManagerhelpstomanageandmonitortheuseofyourUSBprinters,scanners,harddrives,andotherdevicesthatareconnectedtoyourRouter’sUSBportandsharedacrossyournetwork.USBPrintandStorageManagerisfoundintheBelkinRouterManagericondisplayedinyoursystemtray(Windows)ormenubar(Mac).WhenyouhaveoneormoreUSBdevicesattachedtoyourRouter,themainactionsforthosedevicesareavailabledirectlyfromtheBelkinRouterMonitormenu.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change Memory Safe MemorySafeallowsyoutosetuparoutinebackupofyourfilestoaharddriveorflashdriveattachedtoyourRouter.MemorySafeisfoundintheBelkinRouterManagericondisplayedinyoursystemtray(Windows)ormenubar(Mac).Additional Capabilities Guest Access YoucanallowgueststouseyourInternetconnectionwithoutjoiningyourpersonalnetwork.ThenetworknameandpasswordfortheguestnetworkislocatedonthenetworkinformationcardfoundunderthefootofyourRouter.Apersonusingyourguestnetworkwillbeabletojoinwithoutapassword,butwillbeshownaloginpagewhentheyattempttosurftheWeb.Theywillneedtoentertheguestpasswordintothispagetocontinue.Getting to Know Your Router Front Panel [DIAGRAM front.ai] A) Router Status Light YourRouter’sstatusisshownbythelightonthefront.Off:TheRouterisnotpluggedintoapowersource.BlinkingGreen:TheRouterisstartingup.SolidGreen:TheRouterisconnectedtotheInternet.BlinkingAmber:EithertheRJ11cableisnotpluggedin,orthereisnosignal.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change B) Wi-Fi Protected Setup (WPS) Light and Button TheWPSbuttononthefrontofyourRoutercanbeusedtohelpestablishasecureconnectionbetweenyourRouterandotherWPS‐enabledWi‐Fidevicessuchascomputers.TousetheWPSfeatureonyourRouter,see“GettingStarted>AddingComputerstoYourNetwork>UsingtheWPSButton”.ThesmalllightneartheWPSbuttonshowswhatishappeningwhileyouareusingWPStoestablishaconnection.Off:IdleBlinkingGreen:TheRouterislisteningforaWPS‐enabledcomputerorotherdevice.SolidGreen:TheRouterhasmadeasecureconnectionwiththecomputerorotherdevice.Amber:Aconnectionwasnotcreated.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change Back Panel [MR DIAGRAM FOR SHARE AND PLAY mr_shareplay_back.ai] A) ADSL Connector ConnectyourRoutertoaphonejackusingatelephonecord.Insomeareas,amicrofiltermightberequired.B) Wired (LAN) Connectors ConnectcomputersandotherwirednetworkdevicestotheseportsusingEthernetcables.C) USB Port USBprinters,disks,andotherUSBdevicespluggedintothisportwillbesharedonyournetwork.EachUSBporthasalightthatindicatesitsstatus.Off:NoUSBdeviceisconnectedortheattachedUSBdeviceisnotinuse.Blinking:Pleasewaittounplugthedeviceuntilthelightturnsoff.On:TheUSBdeviceisconnectedandbeingsharedonyournetwork.D) Reset Button ThisbuttonisusedtorestartyourRouterinrarecaseswhenitfunctionsincorrectly.ResettingtheRouterwillpreserveyoursettings.Thisbuttonmayalsobeusedtorestorethefactorydefaultsettings.PleaseseetheTroubleshootingsectionformoreinformation.E) Power Connector Connecttheincludedpowersupplytothisjack. Technical Details Technical Features Integrated ADSL2+ Modem
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change The integrated ADSL2+ modem allows you to connect to the Internet via your local Internet Service Provider (ISP) without installing and maintaining a separate DSL modem. Integrated 802.11n Wireless Access Point Utilizing MIMO (Multiple Input Multiple Output) smart-antenna technology, your Router can reach data transfer speeds of up to 300Mbps across your network. NAT IP Address Sharing To save you the cost of adding IP addresses per computer in your house, your Belkin Router uses Network Address Translation (NAT) technology, allowing you to share a single IP address across your network. SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common attacks and viruses. Universal Plug-and-Play (UPnP) Compatibility The UPnP (Universal Plug-and-Play) feature in your Router offers seamless operation of voice and video messaging, games, and other applications that are UPnP-compliant. Web-Based Advanced User Interface You can easily make changes to your Router’s advanced settings through your web browser. These changes can be made from any computer on your network. Belkin Router Monitor The Belkin Router Monitor application helps you to monitor your Router’s status and change network settings. Integrated 4-Port 10/100 Switch Your Router has a built-in, 4-port network switch to allow your wired computers to share: printers, data, MP3 files, digital photos, and much more. USB Port The USB port lets you plug in printers, hard drives, and other USB devices to share across your network. System Requirements Modem Router Broadband ADSL Internet connection with RJ11 (telephone) connection At least one computer with an installed network interface adapter TCP/IP networking protocol installed on each computer RJ11 ADSL telephone cable Internet browser Setup Software A computer running Windows® XP SP2 or higher, Windows Vista®, or Windows 7; or Mac OS® X v10.x Minimum 1GHz processor and 256MB RAM 600MB of free hard-drive space for installation Memory Safe and USB Print and Storage Manager
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change Windows XP SP2 or higher or Windows Vista; or Mac OS X v10.4 or later Minimum 1GHz processor and 256MB RAM 50MB of free hard-drive space for installation
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change Troubleshooting, Support, and Warranty Troubleshooting The Setup CD does not automatically start. IfBelkinSetupdoesnotrunwhenyouinserttheCD‐ROM,yourcomputermaynotbeconfiguredtoopenCDsautomatically.IfBelkinSetupdoesnotappearwithin15seconds,browsetoyourCD‐ROMdriveandopenthe“BelkinSetup”icon.Alternatively,youmayvisithttp://router/andperformthesetupmanually.Pleasesee“ManualSetupUsingYourBrowser”earlierinthismanualformoreinformation.Belkin Setup cannot find my Router. IfBelkinSetupisnotabletocommunicatewithyourRouterduringtheinstallationprocess,pleasecheckthefollowingitems.1) Makesurethatthewirelesshardwareonyourcomputeristurnedon,ifavailable.2) Tryconnectingyourcomputertooneofthefour“wired”portsontheRouterwithanEthernetcable.3) EnsurethattheRouterison.Thefront‐panellightshouldbeon.4) UnplugtheRouter’spowersupplyfor10seconds,thenplugitbackin.5) Theremaybefirewallsoftwareonyourcomputerpreventinganoutgoingconnection.Youmaychoosetotemporarilydisablethissoftwarebeforeattemptingsetup.IfBelkinSetupstillcannotfindtheRouter,youmightchoosetodoamanualsetup.Referto“ManuallyConfiguringNetworkSettings”inthismanualfordetails.Belkin Setup cannot connect my Router to the Internet.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change IfBelkinSetupisnotabletoconnecttheRoutertotheInternet,pleasecheckthefollowingitems:1) Use the troubleshooting suggestions within Belkin Setup. 2) If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly. Some user names require that the ISP’s domain may be at the end of the name. Example: “myname@myisp.com”. The “@myisp.com” part of the user name may need to be typed as well as your user name. 3) If you continue to have no Internet connection, refer to “Manually Configuring Network Settings” in this manual for an alternative setup method. Belkin Setup completed installation, but I cannot browse the Web. The light on the front of my Router is blinking amber. 1) MakesuretheRouterisconnectedtoyourADSLlinewithanRJ11(telephone)cableviatheRouter’sonegrayADSLport.2) Checkthatthemodem(ADSL)connectionisconnectedtoyourbroadband(ADSL)socketonthewall(viaanADSLfilterifoneisrequired).3) UnplugyourRouter’spowersupply,wait10seconds,andplugitbackin.ThiswillcausetheRoutertotrytoreestablishcommunicationwiththeADSLline.I can’t connect to the Internet wirelessly. IfthelightonthefrontoftheRouterissolidgreen,thenyourRouterisconnectedtotheInternet.YoumaynotbeconnectedtotheRouter’swirelessnetwork.Pleasereferto“AddingComputerstoYourNetwork”inthismanualforinstructions.I can’t connect to the Internet wirelessly and my network name is not listed in Available Networks.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change 1) VerifythatyourRouterisonandthefront‐panellightshowssolidgreen.2) IfyouarefarfromtheRouter,youmighttrymovingclosertoseeifyoumighthavebeenoutofrange.3) UsingacomputerattachedtotheRouterviaanetworkcable,visithttp://router/andensurethat“BroadcastSSID”isON.Thissettingisfoundonthe“ChannelandSSID”page.My wireless network performance is slow, inconsistent, suffers from weak signal, or I’m having difficulty maintaining a VPN connection. Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. Note also that connection speed may decrease as you move farther away from the Router. In order to determine if wireless issues are related to range, we suggest temporarily moving the computer within 10 feet from the Router if possible. Changing the wireless channel—Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability. See the section titled “Changing the Wireless Channel” for instructions on how to choose other channels. Limiting the wireless transmit rate—Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Panel, open “Network Connections”, and double-click on your wireless card’s connection. In the properties dialog, select the “Configure” button on the “General” tab, then choose the “Advanced” tab and select the rate property.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable. Experiment with different connection rates until you find the best one for your environment. Note that all available transmission rates should be acceptable for browsing the Internet. For more assistance, see your wireless card’s user manual. I’ve installed this new Router and some of my network clients (computers, game consoles, etc.) are now unable to connect. YournewRoutercamepre‐configuredwithanetworknameandpassword,foundprintedonanattachedcard.AllclientsmustusethisnetworknameandpasswordtoconnectwirelesslytoyourRouter.Youwillneedtofindthenetworksettingsonyourclient,selectthenetworknameprintedonthecardfromthelistofavailablenetworks,andenterthepasswordwhenpromptedtojointhewirelessnetwork.Does the Router support Wireless Protected Access (WPA) security? TheRoutershipswithWPA/WPA2securityturnedon.WindowsXPandsomeoldernetworkhardwaremayrequireasoftwareupdatetosupportWPA/WPA2.I am having difficulty setting up WPA security on my Router. 1) LogintoyourRouterbyvisitinghttp://router/withyourwebbrowser.Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit”. 2) Click“Wireless”intheleft‐handmenu.Thenclick“Security”justbelowthat.3) Selectthe“WPA/WPA2”option.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change 4) Enterapassword.Thiscanbefrom8–63charactersofyourchoice,includingspacesandpunctuation,ORa64‐digithexadecimalnumber(usingonlythenumbers0–9andlettersA–F).5) Click“ApplyChanges”tofinish.Yourwirelessconnectionisnowencrypted.Eachcomputerusingyourwirelessnetworkwillneedtousethenewkey.Note:IfyouareconfiguringtheRouteroverawirelessconnection,youwillhavetore‐connecttotheRouterafterchanginganysecuritysettings.Note:SomeoldernetworkinghardwaresupportsonlyWEPencryption.Ifyouroldercomputerscannotconnecttoyournetwork,try128‐bitor64‐bitWEP,orseeksoftwareupdatesfromtheirmanufacturers.I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Router. 1) LogintoyourRouter.Visithttp://router/withyourwebbrowser.Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit”. 2) Click“Wireless”intheleft‐handmenu.Thenclick“Security”justbelowthat.3) Selectthe“128‐bitWEP”option.4) YoumaytypeinaWEPkeymanually,orgenerateonefromapassphrase.Typeaphraseinthe“Passphrase”fieldandclickthe“Generate”button.AWEPkeyiscomposedof26hexadecimaldigits(0–9,A–F).Forexample,C3030FAF4BB2C3D44BC3D4EE74isavalid128‐bitWEPkey.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change 5) Click“ApplyChanges”tofinish.Yourwirelessactivityisnowencrypted.Eachcomputerusingyourwirelessnetworkwillneedtousethenewkey.Note:IfyouareconfiguringtheRouteroverawirelessconnection,youwillhavetore‐connecttotheRouterafterchanginganysecuritysettings.Note:Someoldernetworkinghardwaresupportsonly64‐bitWEPencryption.Ifyouroldercomputerscannotconnecttoyournetwork,try64‐bitWEP.A disk I plugged into the USB port is not showing up on my computer or in Memory Safe. 1) IsthelightonovertheUSBportthatthediskispluggedinto?Ifnot,tryunpluggingandre‐pluggingthedisk.PleasecheckthattheUSBconnectorisfirmlypluggedintotheRouter.2) Ifyourdiskhasanoptionalpowersupply,pleaseuseitwhilethediskisattachedtoyourRouter.3) TheRoutersupportsFAT16,FAT32‐,orNTFS‐formatteddisks.DisksinotherformatswillnotappearintheFinder(MacOSX)orWindowsInternetExplorer.A printer I plugged into the USB port is not showing up on my computer. 1) IsthelightonovertheUSBportthattheprinterispluggedinto?Ifnot,tryunpluggingandre‐pluggingtheprinter.PleasecheckthattheUSBconnectorisfirmlypluggedintotheRouter.2) ToprinttoaprinterattachedtotheRouter,yourcomputermusthavethatprinter’sdriverinstalled.Pleasecheckthatthedriverisinstalled.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change 3) Theprintermaynotbesettoauto‐connect.ViatheBelkinRouterManager,opentheUSBPrintandStorageCenter.Checkthattheprinterappearsinthelistofavailabledevices.Viewthepropertiesoftheprinter,andcheckthat“auto‐connect”isselected.A different sort of USB device that I plugged into the USB port is not showing up on my computer. MostUSBdevicesotherthandisksandprintersmustbeaccessedviatheUSBPrintandStorageCenter.1) IsthelightonovertheUSBportthatthedeviceispluggedinto?Ifnot,tryunpluggingandre‐pluggingthedevice.PleasecheckthattheUSBconnectorisfirmlypluggedintotheRouter.2) ViatheBelkinRouterManager,opentheUSBPrintandStorageCenter.Checkthatthedeviceappearsinthelistofavailabledevices.3) Selectthedeviceandclickthe“Use”button.Thedevicewillbevirtuallyconnectedtoyourcomputeruntilyouchooseto“StopUsing”thedevice,oranotherpersonrequestsuseofthedevice.Technical Support UShttp://www.belkin.com/supportUKhttp://www.belkin.com/uk/supportAustraliahttp://www.belkin.com/au/support
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change NewZealandhttp://www.belkin.com/au/supportSingapore6562218850Europehttp://www.belkin.com/uk/support Belkin International, Inc., Limited 2-Year Product Warranty What this warranty covers. Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin warrants the Belkin product for two years. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use. What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to get service. To get service for your Belkin product you must take the following steps:
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change 1. Contact Belkin International, Inc., at 12045 Waterfront Drive, Los Angeles, CA 90094, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information: a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change *Regulatory Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 Waterfront Drive, Los Angeles, CA 90094, declare under our sole responsibility that the device, F7D3402 v1, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change Caution: Exposure to Radio Frequency Radiation. The device shall be used in such a manner that the potential for human contact normal operation is minimized. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE:
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC PART 68 STATEMENT. This equipment complies with Part 68 of FCC Rules. On the base unit of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. IF REQUESTED, THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US: BKCDL01BF7D3402V1. The digits represented by 01Bare the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to you line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area. If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in it is facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change If you experience trouble with this telephone equipment, please contact the following address and phone number for information on obtaining service or repairs. The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. COMPANY: Belkin International, Inc. ADDRESS: 501 West Walnut Street, Compton, CA 90220-5221, USA TEL NO: 1-310-604-2315 Europe European Union Radio products with the CE or CE alert marking comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). • EN 60950-1:2006 (IEC60950-1) – Product Safety • EN 300 328 Technical requirement for radio equipment • ETS 301 489 General EMC requirements for radio equipment. Information Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Product Family Standards. • EN 55022 (CISPR 22) – Electromagnetic Interference • EN 55024-1 – Electromagnetic Immunity • EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics • EN 61000-3-3 (IEC610000) – Power Line Flicker • EN 60950-1 (IEC60950-1) – Product Safety Products that contain the radio transmitter are sometimes labeled with the Notified Body number (CE0560) or CE alert marking if the standard used in the conformity is not harmonized across the European Community.
23532_8820-00394_F7D3402 v1_Share Modem Router_0205 change *Back cover © 2010 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 8820-00394 F7D3402 Ok mk 12/15/09

Navigation menu