Belkin F7D7602V2 NetCam HD+ User Manual

Belkin International, Inc. NetCam HD+

User Manual

1. Ifyoudon’tseethepop‐up,youarenotconnectedtotheNetCamHDWi‐Fisignal.Repeatstep3andwaitfortheconfirmationoftheconnection.2. Oncesetup,setswitchto.AppFeatures:Tapacamera’snametoview.
Toaccessacamera’sSettingspage,tap.CameraStatusIcons:Private:CameraisavailabletosharewithmultipleguestsShared:Cameraissettoblockallguests
Private(withNetCamCloud+):Cameraisviewableonlybyyou,andhasNetCamCloud+.Shared(withNetCamCloud+):Cameraisviewablebyyouandanyoneyou’vechosentosharewith,andhasNetCamCloud+.Error:Cameraisnotworking.WelcometoNetCamHD.Downloadacompletemanualatwww.belkin.comViewingthroughabrowser1. Fromanycomputer,visithttp://www.belkin.com/netcam/2. Enteryourusernameandpasswordcreatedduringsetup.
*SomefeaturesshownmayrequireNetCamCloud+account.Wall‐Mount1. Unscrewcamerapostfromthebaseandremoveweight.2. Attachscrewstowallandhangplateontoscrews.3. Alignbasewithplateandscrewoncamerapost.
FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device, F7D7602, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IMPORTANT NOTE: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IMPORTANT NOTICE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IC Statement: CAN ICES-3 (B)/NMB-3(B) Industry Canada Statement: This device complies with Industry Canda license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. IMPORTANT NOTE: Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Avertissement: This radio transmitter (IC: 3623A-F7D7602V2/ Model: F7D7602v2) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. 

Navigation menu