Belkin F8E830-KBD Wireless Keyboard User Manual K105 English

Belkin International, Inc. Wireless Keyboard K105 English

User Manual

Darfon Electronics Corp. Wireless Keyboard F8E830-KBD, K105 User Manual
System Requirement - Win 98, Win 2000,ME or Win XP Operating System - IBM PC or compatible - Available PS2 or USB port - CD-ROM or DVD-ROM drive Hardware Installation 1.Connecting the receiver module For USB Interface (If no PS/2 Port) - Plug the receiver cable into the USB port of your system. - System will automatically detect for new hardware. - Follow system instruction for setup For PS/2 (If no USB port) - Connect the PS/2 adaptor to the USB connector of the receiver, and plug into the mouse PS/2 port. - Connect the PS/2 cable (blue) to the keyboard PS/2 port. - Restart your system. 2. Load batteries in RF keyboard ( 2 AA batteries for keyboard) 3. Synchronizing the receiver and wireless keyboard A. Press the connect button on top of the receiver, then press the button on the bottom of keyboard within 10 seconds. B. If the keyboard did not connect, please repeat step A again. Software Installation - Insert CD Driver into CD-ROM or DVD drive. - The system should run automatically; if not, double click “setup.exe” - The onscreen setup will guide you through rest of the process. - After the software installation is completed, you will be prompted to restart your computer.
Keyboard Hotkey Definition Hotkey definition (From Left to Right) Item Function Description 1 Home/Favorite WWW application 2 Email Email application 3 Search Launch the search function of your browser 4 My Document Open a new document 5 Desktop Show “Desktop” 6 Calendar Launch the calendar application 7 F-Lock Function lock: Enhanced function keys for F1 to F12. Enables key functions between commands on the side of keys, and commands on the top of keys. When “Fn Lock is” on, the commands on the top of keys will be enabled. 8 My Music Launch “My music” application 9 Media Launch “Media” application. 10 Forward Previous Track 11 Backward Next Track
12 Play/Pause Play/Pause 13 Stop Stop 14 Vol+, Vol -, Mute Volume Up and Volume Down, and Mute Enhanced Function keys Description F1 New: Create a new document or file F2 Open: Open a document or file F3 Save: Save the document or file in the active window F4 Close: Close a document or file at in active window F5 Print: Print the document contents in the active window F6 Undo: Cancel the previous function F7 Redo: Cancel the previous undo action F8 Help: Open the “Help” function for the active window. F9 Reply: Reply to the email in the active window. F10 Fwd: Forward the email in the active window F11 Send: Send the email in the active window F12 Check: Check the spellings in the active window Important Information for RF Product - For optimal performance, place the receiver at least 8 inches (20 cm) away from any electronics devices (ex. computer, monitor, etc.) to avoid interference. - Do not place receiver on metal surface. - When you discover others keyboard and mouse interfering with yours, please Reset the keyboard and mouse again. - After installing the driver, Num/Caps/Scroll Lock Functions will show on Screen. - When you plug in the receiver into PS/2 port, please do make sure your PC is Power Off. - The mouse uses a fast and sensitive 800 CPI optical sensor. It will move faster than normal optical mouse. Please change moving speed from mice setting.
FCC Warning! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by on or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. The user manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu