Belkin F8Z492 Bluetooth Music Receiver User Manual manual

Belkin International, Inc. Bluetooth Music Receiver manual

manual

Belkin International, Inc. Confidential 1 Bluetooth Music Receiver F8Z492
Belkin International, Inc. Confidential 2 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The Bluetooth Music Receiver must be installed and used in strict accordance with the manufacturer’s instructions. This device complies with the following radio frequency and safety standards. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
Belkin International, Inc. Confidential 3 Industry Canada (IC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the IC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1) This device may not cause harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. IC RF Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This device must not be co-located or operating in conjunction with any other antenna or transmitter. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
Belkin International, Inc. Confidential 4 Overview The F8Z492 is a class 2 Bluetooth V2.1+EDR music receiver. It allows you enjoy music that is streamed from your portable player device or Bluetooth enabled notebook/ PC to your stereo speaker. Features (1) Fully compliant Bluetooth V2.1+EDR system (2) Bluetooth Advanced Audio Distribution Profile v 1.0 (3) Bluetooth Class 2 RF output (4) 2.4GHz~2.4835GHz ISM band (5) RoHS Compliant
Belkin International, Inc. Confidential 5 Quick Start Guide Bluetooth Music Receiver (F8Z492) Installation 1. Connect one end of an audio cable to Earphone Jack in Bluetooth Music Receiver and another end to your Stereo System. 2. Power on the Bluetooth Music Receiver. a. Connect the power adapter into Bluetooth Music Receiver power jack. b. The LED light will flash (light on and then off ) one time to indicate the unit is powered. c. It is ready for mobile phone* to link to it now. 3. Go to Bluetooth manager of your mobile phone, i.e. iPhone to find the Bluetooth Music Receiver. a. Search Bluetooth audio device and find Bluetooth Music Receiver. b. Select the found Receiver and enter pin code “0000” to add the Bluetooth Music Receiver into the paired list of mobile phone. c. The LED light will turn on and off gradually one time. 4. Select Bluetooth Music Receiver in the paired list of mobile phone. a. Confirm to connect it. b. The LED light will be constantly ON to indicate that the link is OK. 5. Play the music in mobile phone and you can listen to music from your Stereo System. If Out of Range 1. If you walk away and out of range the LED light will turn off gradually to indicate that it is out of range and no more signals are received. 2. If you walk back within 15 seconds it will link again automatically and the LED light will turn on gradually. 3. If it is over 15 seconds you need to re-do step 4 in Installation to link to it again. LED light indicator Earphone Jack Power Jack
Belkin International, Inc. Confidential 6 New mobile phone If you want to connect new mobile phone with Bluetooth Receiver, make sure that the unit is not in use and then do the step 3 in Installation. LED Indication List Status LED Indication Power on Flash (on then off) one time Pair Bluetooth Receiver Turn on then off gradually one time Device Linked On Standby Off Out of Range Off *Note: The mobile phone has to support Bluetooth AADP profile.
Belkin International, Inc. Confidential 7 Specifications Product Name Bluetooth Music Receiver Model Number F8Z492 Standard Bluetooth V2.1+EDR Bluetooth Profiles AADP, GAVDP Bluetooth Chip BlueCore5-Multimedia External Frequency Band 2.4GHz ~ 2.4835GHz unlicensed ISM band Modulation Method GFSK for 1Mbps; π/4-DQPSK for 2Mbps; 8DPSK for 3Mbps Spread Spectrum FHSS (Frequency Hopping Spread Spectrum) RF Output Power Class 2 (under 4 dBm) Audio Output 3.5mm Audio Jack Antenna terminal 50 Ohms AC power 115V or 230V Dimension 45.6(L) x 45.6(W) x 21.8(H) (mm) Weight 36.5g (Main body) Operating Temperature -20℃~ +60℃ Storage Temperature -10 ~ +70℃ Humidity 5 ~ 90% (non-condensing)

Navigation menu